Glardon-Vallorbe Screwhead with Tang Precision Files - LP1840

Screwhead with tang files are used for filing slots in small screws or narrow slots of any kind. Screwhead files are available in various thicknesses from 0.45mm to 0.80mm. The cut is the same - single cut, on every screwhead file. Both sides are safe as the cut is only on the edges.

Screwhead files are numbered differently than other precision files. The number LP1840-4-4 is a 4" length cut file with a thickness (not a cut) of #4, which is 0.55mm on this scale.

The last number listed in the part number for screwhead files is for thickness not for cut.

Things you should know about ordering hand files:

Glardon-Vallorbe Swiss Made Precision Files are measured from the point where the teeth begin to the end of the file. A 6" precision file will measure 8 1/2" long from tip to end of tang, but it is called a 6" file.
 

Available in the following lengths:
3 Inch/75mm
4 Inch/100mm

Lengths do not include the handle section (tang)

And in various Thicknesses
1 0.80mm
2 0.70mm
3 0.60mm
4 0.55mm
6 0.45mm


Glardon-Vallorbe Swiss Made Precision Files-The world's standard for quality and performance!

Glardon-Vallorbe Swiss Made Precision Files are manufactured to precise production standards, using a combination of machine cutting and hand craftsmanship to produce the most accurate, best cutting, and longest-lasting files in the world. They are made of the finest heat-tempered, chrome alloy steel and have the "right" feel, action and balanced desired by all true craftsmen. These precision files deliver superior performance on all metals. Simply the best you can buy! Formerly distributed by Grobet USA under the brand name Grobet Swiss.

California Prop 65 Warning:
Cancer and Reproductive Harm. www.P65warnings.ca.gov.