{"title":"Durston","description":"","products":[{"product_id":"durston-1313-ring-shank-bender-nylon-dies","title":"Durston 1313-11 Piece Ring Shank Bender with Nylon Dies","description":"\u003cp\u003eThis ring shank bending system brings matched steel and nylon dies together in a compact stand, giving you a dedicated station for forming ring shanks and curved elements with consistent results. The dies seat positively in the jig so each bend feels controlled and repeatable under hand pressure.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSpace-saving vertical storage system holds the bending jig below and the die sets above for quick, organized access.\u003c\/li\u003e\n\u003cli\u003eTop die tray swivels out of the way to open up the working area around the bender during setup and forming.\u003c\/li\u003e\n\u003cli\u003eMatched forming and bed dies support the metal from both sides, helping to produce accurate, repeatable bends.\u003c\/li\u003e\n\u003cli\u003eTool-steel dies are hardened and polished, with radiused edges designed to help reduce marking on the metal.\u003c\/li\u003e\n\u003cli\u003eIncludes nylon dies that provide additional forming options and can help protect more delicate surfaces.\u003c\/li\u003e\n\u003cli\u003eBending jig and dies are precision made for smooth operation and reliable performance in daily shop use.\u003c\/li\u003e\n\u003cli\u003eBender can be mounted to a worktable with clamps or by bolting through the mounting holes to suit your setup.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTool Type\u003c\/td\u003e\n\u003ctd\u003eRing shank bending system with matched dies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSteel Die Sets\u003c\/td\u003e\n\u003ctd\u003e11 matched die sets (forming die + bed)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDie Shapes\u003c\/td\u003e\n\u003ctd\u003eRound, square, and rhombus profiles for varied ring and shank forms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDie Material\u003c\/td\u003e\n\u003ctd\u003eHardened, polished tool steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNylon Dies\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage System\u003c\/td\u003e\n\u003ctd\u003eIntegrated stand with lower bender mount and upper swiveling die tray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eClamps or bench bolts through base mounting holes (hardware not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufactured In\u003c\/td\u003e\n\u003ctd\u003eGreat Britain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eDurston\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eItem\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003cth\u003eQty\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBending jig\u003c\/td\u003e\n\u003ctd\u003eRing shank bender body with mounting base\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSteel die sets\u003c\/td\u003e\n\u003ctd\u003eMatched tool-steel forming dies with corresponding beds\u003c\/td\u003e\n\u003ctd\u003e11 sets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNylon dies\u003c\/td\u003e\n\u003ctd\u003eNylon forming dies for alternative bending and surface protection\u003c\/td\u003e\n\u003ctd\u003eSet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage stand\u003c\/td\u003e\n\u003ctd\u003eSpace-saving base with upper swiveling die tray\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eEach steel die includes a forming shape and matching bed, designed to work together in the jig for accurate ring shank forming. For best results, mount the bender securely to a stable bench surface using suitable clamps or bolts (mounting hardware not included).\u003c\/p\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":42889043345622,"sku":"148.099","price":433.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-1313-11-piece-ring-shank-bender-with-nylon-dies-otto-frei-1.jpg?v=1719959225"},{"product_id":"durston-1309-complete-jump-ringer","title":"Durston 1309 The Complete Jump Ringer","description":"\u003cp\u003eThe Durston 1309 Complete Jump Ringer is a bench-mounted jump ring making machine designed for use with a Foredom No. 30 style handpiece and a flex shaft machine. It allows rapid, repeatable production of jump rings from soft non-ferrous jewelry wire, with precise control over ring size and consistency. As the coil builds and the saw begins its steady cut, finished rings collect in a clean, predictable rhythm.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for mass production of jump rings from soft non-ferrous wire\u003c\/li\u003e\n\u003cli\u003eUpdated base-mounted coil holder for improved stability\u003c\/li\u003e\n\u003cli\u003eSafety coil winder can be positioned freely on the workbench\u003c\/li\u003e\n\u003cli\u003eExtended mandrel length allows longer coils and higher output per run\u003c\/li\u003e\n\u003cli\u003eHigh stem design provides increased hand clearance and full 360° positioning\u003c\/li\u003e\n\u003cli\u003eIncludes a comprehensive set of mandrels for a wide range of ring sizes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Wire Size\u003c\/th\u003e\n\u003ctd\u003e13 gauge (1.85 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMandrel Size Range\u003c\/th\u003e\n\u003ctd\u003e2.0–12.0 mm inside diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMandrel Increments\u003c\/th\u003e\n\u003ctd\u003e0.5 mm steps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMandrel Length\u003c\/th\u003e\n\u003ctd\u003e4-3\/4 in (120.7 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Materials\u003c\/th\u003e\n\u003ctd\u003eGold, silver, copper and other soft non-ferrous wires\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufactured In\u003c\/th\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eDurston\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eItem\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMandrels\u003c\/td\u003e\n\u003ctd\u003e21 mandrels, 2.0–12.0 mm in 0.5 mm sizes (2.0, 2.5, 3.0, 4.0 mm undrilled; all others drilled)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoil Holder\u003c\/td\u003e\n\u003ctd\u003e2-sided coil holder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSaw Blade\u003c\/td\u003e\n\u003ctd\u003e1-1\/4\" high-speed steel blade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSaw Blade Mandrel\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHandpiece Holder\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoil Winder\u003c\/td\u003e\n\u003ctd\u003eWith keyless chuck\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHex Keys\u003c\/td\u003e\n\u003ctd\u003eSet of 3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eFor use with a Foredom No. 30 type handpiece powered by a flex shaft machine. Flex shaft and handpiece sold separately.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eNot for use with platinum, titanium, steel, or niobium wire. Outside diameter of finished jump rings will vary depending on the wire diameter used.\u003c\/p\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43536326033622,"sku":"143.209","price":376.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-1309-the-complete-jump-ringer-otto-frei-1.jpg?v=1719959164"},{"product_id":"durston-1061-pedestal-stand-rolling-mills","title":"Durston 1061 Pedestal Stand for Rolling Mills","description":"\u003cp\u003eThe \u003cstrong\u003eDurston 1061 Pedestal Stand\u003c\/strong\u003e is a purpose-built floor stand designed to securely mount Durston rolling mills at a comfortable working height. Pre-drilled to accommodate a wide range of Durston mill models, this stand provides a stable, dedicated workstation for sheet and wire rolling operations in a professional studio or shop environment.\u003c\/p\u003e\n\n\u003cp\u003eCompatible models include all \u003cstrong\u003eDurston Mini-Mills\u003c\/strong\u003e, the full \u003cstrong\u003eDRM line (DRM 100, DRM 130, and DRM 150)\u003c\/strong\u003e in both reduction gear and non-reduction gear configurations, and the \u003cstrong\u003eAgile line\u003c\/strong\u003e of Durston rolling mills (from April 2019). Note that the Agile 165 aligns with 2 holes on the pedestal stand; the recommended minimum for secure mounting is 2 holes used.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eThis stand does not fit any version, new or old, of the D2 120, D2 130, or D4 158 over-and-under rolling mills.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eMounting hardware for securing the stand to the floor is not included. If permanent floor mounting is not possible in your shop, a practical workaround is to mount the pedestal to a sheet of 1\/2\" or 3\/4\" plywood cut at least 6 feet long and 3 feet wide, with the stand centered so the rolling mill handle grip runs perpendicular to the long dimension of the plank.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePre-drilled for Durston Mini-Mills, DRM 100, DRM 130, DRM 150, and Agile line mills (from April 2019)\u003c\/li\u003e\n\u003cli\u003eFits both reduction gear and non-reduction gear DRM models\u003c\/li\u003e\n\u003cli\u003eIncludes 4 mounting bolts with nuts and washers for mill-to-stand attachment\u003c\/li\u003e\n\u003cli\u003eAgile 165 compatible using 2 alignment holes (2-hole mounting meets recommended minimum)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDoes not fit D2 120, D2 130, or D4 158 over-and-under rolling mills\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eFloor-mounting hardware not included\u003c\/li\u003e\n\u003cli\u003eMade in Great Britain\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003e1061\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e11-3\/4\" (300 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDepth\u003c\/th\u003e\n\u003ctd\u003e13-3\/4\" (350 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e35-3\/8\" (900 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncludes\u003c\/th\u003e\n\u003ctd\u003e4 mounting bolts with nuts and washers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eMade in Great Britain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFloor-mounting hardware is \u003cem\u003enot\u003c\/em\u003e included with this stand.\u003c\/li\u003e\n\u003cli\u003eThe Agile 165 aligns with 2 holes on the pedestal; using a minimum of 2 holes for mounting is recommended.\u003c\/li\u003e\n\u003cli\u003eThis stand is \u003cstrong\u003enot compatible\u003c\/strong\u003e with the D2 120, D2 130, or D4 158 rolling mills in any version.\u003c\/li\u003e\n\u003cli\u003eIf permanent floor mounting is not an option, consider bolting the stand to a sturdy sheet of 1\/2\"–3\/4\" plywood (at least 6' × 3') for a stable freestanding base.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43553070710998,"sku":"128.173","price":355.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-pedestal-stand-for-rolling-mills-otto-frei.jpg?v=1719959074"},{"product_id":"durston-21-punch-matched-dapping-set-flat-die","title":"Durston 21 Punch Matched Dapping Punch Set with Flat Die-3mm to 36mm Punches","description":"\u003cp\u003eThe Durston 21 Punch Matched Dapping Punch Set offers professional jewelers and metalsmiths a comprehensive range of highly polished forming punches paired with a flat dapping block featuring matched spherical depressions. Spanning 3.0mm to 36.0mm, this set delivers the precision and durability expected from W. Durston Ltd of High Wycombe, Great Britain — crafted from properly hardened, top-quality English steel for a lifetime of professional use.\u003c\/p\u003e\u003cp\u003eEach punch is matched to a corresponding depression in the flat dapping block, enabling accurate, consistent dome forming across a wide range of sizes. The set also includes four additional depressions on the block that are intentionally larger than their corresponding punches, providing the necessary clearance to accommodate the thickness of metal being formed. A unique storage tray keeps all components organized and protected.\u003c\/p\u003e\u003cp\u003eThis set is equivalent to the Durston 125.008 Large matched dapping punch and die set, but without the three largest dies — making it an ideal mid-range option for studios that work primarily within the 3.0mm–36.0mm size range.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e21 matched dapping punches ranging from 3.0mm (1\/8\") to 36.0mm (1-3\/8\")\u003c\/li\u003e\n\u003cli\u003eFlat dapping block with 23 spherical depressions sized 3.0mm through 38.0mm\u003c\/li\u003e\n\u003cli\u003eFour largest block depressions intentionally oversized to allow for metal thickness during forming\u003c\/li\u003e\n\u003cli\u003ePunches and block made from properly hardened, highly polished English steel\u003c\/li\u003e\n\u003cli\u003eUnique storage tray included to keep the set organized and ready for use\u003c\/li\u003e\n\u003cli\u003eComparable in quality to German and Italian equivalents\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eHardened, polished English steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eW. Durston Ltd, High Wycombe, Great Britain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNumber of Punches\u003c\/th\u003e\n\u003ctd\u003e21\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePunch Size Range\u003c\/th\u003e\n\u003ctd\u003e3.0mm (1\/8\") – 36.0mm (1-3\/8\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNumber of Block Depressions\u003c\/th\u003e\n\u003ctd\u003e23\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlock Depression Range\u003c\/th\u003e\n\u003ctd\u003e3.0mm – 38.0mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncludes Storage Tray\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e21 dapping punches: 3.0mm, 4.0mm, 5.0mm, 6.0mm, 7.0mm, 8.0mm, 9.0mm, 10.0mm, 11.0mm, 12.0mm, 13.0mm, 14.0mm, 15.0mm, 17.0mm, 19.0mm, 21.0mm, 23.0mm, 25.0mm, 28.0mm, 32.0mm, and 36.0mm\u003c\/li\u003e\n\u003cli\u003eFlat dapping block with 23 spherical depressions: 3.0mm, 4.0mm, 5.0mm, 6.0mm, 7.0mm, 8.0mm, 9.0mm, 10.0mm, 11.0mm, 12.0mm, 13.0mm, 14.0mm, 15.0mm, 16.0mm, 17.0mm, 19.0mm, 21.0mm, 23.0mm, 25.0mm, 27.0mm, 30.0mm, 34.0mm, and 38.0mm\u003c\/li\u003e\n\u003cli\u003eStorage tray\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eNotes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe four largest depressions on the flat block (27.0mm, 30.0mm, 34.0mm, and 38.0mm) are larger than the largest punches in the set — this is intentional design to allow room for the metal being formed.\u003c\/li\u003e\n\u003cli\u003eThis set is equivalent to the Durston 125.008 Large matched dapping punch and die set, minus the three largest dies.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43553071071446,"sku":"125.049","price":332.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-21-punch-matched-dapping-punch-set-with-flat-die-3mm-to-36mm-punches-otto-frei.jpg?v=1719959074"},{"product_id":"durston-double-d2-130mm-combination-rolling-mill","title":"Durston 1051 Double D2 130mm Rolling Mill","description":"\u003cp\u003e\u003cstrong\u003eThe Durston Double D2-130mm Rolling Mill\u003c\/strong\u003e is a compact, production-ready combination mill built for professional shops and schools that require both flat sheet rolling and wire rolling in a single machine. Upper flat rolls and lower square wire rolls run on maintenance-free, lifetime-guaranteed bearings, while large hand-wheel adjusters, a groove indicator on the wire rolls, and a calibrated roll-gap dial in both millimeters and inches (down to 0.001\"\/0.025 mm) make repeatable setup fast and dependable. The dual reduction gearbox delivers either torque or speed on demand, and side extension half-rounds enable quick forming of \"D\" profiles without additional tooling.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDual reduction gearbox with 7:1 and 3.5:1 ratios for power or speed as needed\u003c\/li\u003e\n\u003cli\u003eCalibrated roll-gap dial graduated in both inches and millimeters for precise thickness control\u003c\/li\u003e\n\u003cli\u003eWire groove indicator to track the last pass position\u003c\/li\u003e\n\u003cli\u003eSide extension half-rounds for quick forming of \"D\" profiles in four sizes\u003c\/li\u003e\n\u003cli\u003eMaintenance-free bearings on both upper and lower rolls\u003c\/li\u003e\n\u003cli\u003e19 square wire groove sizes ranging from 1 mm to 10 mm\u003c\/li\u003e\n\u003cli\u003eLarge hand-wheel adjusters for smooth, controlled gap setting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eDurston 1051 Double D2-130mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoller Type\u003c\/th\u003e\n\u003ctd\u003eCombination (flat upper \/ square wire lower)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoller Length\u003c\/th\u003e\n\u003ctd\u003e130 mm (5-1\/8\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoller Diameter\u003c\/th\u003e\n\u003ctd\u003e60 mm (2-3\/8\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheet Thickness Capacity\u003c\/th\u003e\n\u003ctd\u003e6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWire Grooves\u003c\/th\u003e\n\u003ctd\u003e19 square sizes, 1 mm – 10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax Wire Capacity\u003c\/th\u003e\n\u003ctd\u003e10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGear Ratios\u003c\/th\u003e\n\u003ctd\u003e7:1 and 3.5:1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSide Extensions\u003c\/th\u003e\n\u003ctd\u003eHalf-round \"D\" shapes: 4, 3, 2, 1.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall Dimensions\u003c\/th\u003e\n\u003ctd\u003e16-1\/2\" L × 8-3\/4\" W × 22-1\/4\" H (420 × 220 × 565 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNet Weight\u003c\/th\u003e\n\u003ctd\u003e163 lb (74 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eFinancing is available for this mill. Inside and outside financing options can be arranged. For inside financing inquiries, contact Wyatt Frei at 800-772-3456 x107 or \u003ca href=\"mailto:wyatt@ottofrei.com\"\u003ewyatt@ottofrei.com\u003c\/a\u003e.\u003c\/p\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43553071399126,"sku":"128.116","price":3426.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-1051-double-d2-130mm-rolling-mill-otto-frei.jpg?v=1689351864"},{"product_id":"durston-agile-c110-combo-rolling-mill","title":"Durston 1019 Agile C110 Combo Rolling Mill","description":"\u003cp\u003eThe \u003cstrong\u003eDurston Agile C110 Combination Rolling Mill\u003c\/strong\u003e delivers professional-grade performance in a lighter, more competitively priced package. Engineered with a thinner frame than the DRM 110 line, the Agile C110 maintains full structural integrity for everyday studio use without sacrificing roll quality or durability. A traditional T-bar replaces the heavy cast handwheel for roll opening adjustment, contributing to meaningful weight and cost savings.\u003c\/p\u003e\u003cp\u003eThe combination rolls span 110mm and are divided into three functional zones: 50mm flat, 22mm half-round, and 33mm wire grooves — giving jewelers and metalsmiths versatile forming options in a single mill. Rolls are induction hardened to 64 HRC to a depth of 6mm, ensuring long-term wear resistance. Bearings are self-lubricating and maintenance free.\u003c\/p\u003e\u003cp\u003eThe heavy-duty 4-to-1 gearbox sets this mill apart, making roll turning significantly easier and reducing operator fatigue. Two specially formed gears behind the cover contribute to smoother rolling action. A protective guard surrounds the top gears for added safety.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLighter frame construction than DRM 110 series — no compromise on load capacity\u003c\/li\u003e\n\u003cli\u003eT-bar roll opening adjustment replaces cast handwheel for weight savings\u003c\/li\u003e\n\u003cli\u003eRolls induction hardened to 64 HRC to a depth of 6mm\u003c\/li\u003e\n\u003cli\u003eSelf-lubricating, maintenance-free bearings\u003c\/li\u003e\n\u003cli\u003eHeavy-duty 4-to-1 gearbox for easier turning\u003c\/li\u003e\n\u003cli\u003eTwo specially formed gears for smoother rolling action\u003c\/li\u003e\n\u003cli\u003eProtective guard around top gears\u003c\/li\u003e\n\u003cli\u003eCombination roll: 50mm flat, 22mm half-round, and 33mm wire groove zones\u003c\/li\u003e\n\u003cli\u003e9 wire groove sizes ranging from 7mm down to 1mm\u003c\/li\u003e\n\u003cli\u003e4 half-round groove sizes: 5 × 1.7mm, 4 × 1.4mm, 3 × 1.15mm, and 2 × 0.8mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eRoll Size\u003c\/th\u003e\n\u003ctd\u003e110mm × 50mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoller Type\u003c\/th\u003e\n\u003ctd\u003eCombination (Flat \/ Half-Round \/ Wire)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlat Section\u003c\/th\u003e\n\u003ctd\u003e50mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHalf-Round Section\u003c\/th\u003e\n\u003ctd\u003e22mm — sizes: 5 × 1.7mm, 4 × 1.4mm, 3 × 1.15mm, 2 × 0.8mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWire Groove Section\u003c\/th\u003e\n\u003ctd\u003e33mm — 9 sizes, 7mm–1mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoller Diameter\u003c\/th\u003e\n\u003ctd\u003e50mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoll Hardness\u003c\/th\u003e\n\u003ctd\u003e64 HRC to 6mm depth (induction hardened)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Sheet Thickness Capacity\u003c\/th\u003e\n\u003ctd\u003e6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Wire Capacity\u003c\/th\u003e\n\u003ctd\u003e7mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGear Ratio\u003c\/th\u003e\n\u003ctd\u003e4-to-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e13-1\/2″ L × 7-3\/4″ W × 12-1\/2″ H (345mm × 200mm × 320mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNet Weight\u003c\/th\u003e\n\u003ctd\u003e57 lbs. (26 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eNotes\u003c\/h3\u003e\u003cp\u003eThe wire grooves on this mill use a \u003cstrong\u003etraditional wire groove\u003c\/strong\u003e profile — a six-sided irregular hexagon shape (sometimes referred to as diamond or square wire). This geometry is structurally strong, straightforward to produce, and compatible with a wide range of drawplate profiles. \u003cstrong\u003eTraditional wire grooves are intended for reducing wire diameter,\u003c\/strong\u003e enabling the creation of varied wire profiles using drawplates. They are generally not used for producing finished wire product directly off the mill.\u003c\/p\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43553071857878,"sku":"128.124C110","price":1028.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/128.124C110NEW1_thumb_04885a91-a44e-4874-af3a-b5b096c8b1c0.jpg?v=1763489724"},{"product_id":"durston-small-necklace-mandrel-cast-iron-8in","title":"Durston Small Necklace Mandrel","description":"\u003cp\u003eThe \u003cstrong\u003eDurston Small Necklace Mandrel\u003c\/strong\u003e is a highly polished cast iron forming tool designed for hammering, forging, and wax work to create naturally draping necklaces. Known in Germany as the \u003cem\u003e\"Iron Maiden,\"\u003c\/em\u003e this beautifully finished mandrel doubles as an attractive counter or window display piece, making it as functional on the bench as it is elegant in a retail setting. This is the smaller of the two necklace mandrel sizes available from Durston.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHighly polished cast iron construction for smooth forming surfaces\u003c\/li\u003e\n\u003cli\u003eIdeal for hammering, forging, and wax work\u003c\/li\u003e\n\u003cli\u003eDesigned to create natural draping necklace shapes\u003c\/li\u003e\n\u003cli\u003eAttractive enough for use as a counter or window display\u003c\/li\u003e\n\u003cli\u003eSmaller of two available necklace mandrel sizes\u003c\/li\u003e\n\u003cli\u003eMade in England by Durston\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e8\" (200 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e5-1\/2\" (140 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNeck Diameter\u003c\/th\u003e\n\u003ctd\u003e3-3\/4\" (95 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNet Weight\u003c\/th\u003e\n\u003ctd\u003e7.8 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eHighly polished cast iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCountry of Origin\u003c\/th\u003e\n\u003ctd\u003eEngland\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eDurston\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43557855756502,"sku":"112.273SM","price":97.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-small-necklace-mandrel-otto-frei.jpg?v=1719958949"},{"product_id":"durston-oval-bracelet-mandrel-15in-380mm","title":"Durston Oval Bracelet Mandrel 15\" (380mm) Long","description":"\u003cp\u003eThe Durston Oval Bracelet Mandrel is a professional-grade forming tool crafted from hardened steel with a smooth, highly polished surface. Measuring 15\" (380mm) in length, this mandrel is designed for shaping bracelets in gold, silver, copper, and other metals with precision and consistency. The oval cross-section allows jewelers and metalsmiths to form bracelets to a natural wrist-fitting profile. Manufactured in Great Britain by W. Durston \u0026amp; Son LTD., this mandrel reflects the quality and craftsmanship the Durston name is known for in professional jewelry studios worldwide.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHardened steel construction for durability and resistance to deformation\u003c\/li\u003e\n\u003cli\u003eSmooth, highly polished surface to prevent marring metal during forming\u003c\/li\u003e\n\u003cli\u003eOval cross-section profile for shaping bracelets to a natural wrist contour\u003c\/li\u003e\n\u003cli\u003eSuitable for use with gold, silver, copper, and other metals\u003c\/li\u003e\n\u003cli\u003e15\" (380mm) length provides ample working surface\u003c\/li\u003e\n\u003cli\u003eMade in Great Britain by W. Durston \u0026amp; Son LTD.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003e143.017\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e15\" (380mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTop Diameter\u003c\/th\u003e\n\u003ctd\u003e32 x 36mm (oval)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBottom Diameter\u003c\/th\u003e\n\u003ctd\u003e65 x 72mm (oval)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eHardened steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSurface Finish\u003c\/th\u003e\n\u003ctd\u003eSmooth, highly polished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCountry of Origin\u003c\/th\u003e\n\u003ctd\u003eGreat Britain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eW. Durston \u0026amp; Son LTD.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43557860770006,"sku":"143.019","price":165.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-oval-bracelet-mandrel-15-380mm-long-otto-frei.jpg?v=1719958949"},{"product_id":"durston-24-punch-matched-dapping-set","title":"Durston Large 24 Punch Matched Dapping Punch \u0026 Die Set","description":"\u003cp\u003eThe \u003cstrong\u003eDurston Large 24 Punch Matched Dapping Punch \u0026amp; Die Set\u003c\/strong\u003e is a professional-grade forming tool set made by W. Durston Ltd of High Wycombe, Great Britain. Crafted from properly hardened and polished English steel, this set delivers the quality and precision that serious jewelers and metalsmiths demand at a value that competes with comparable German and Italian makes.\u003c\/p\u003e\u003cp\u003eThe set includes 24 highly polished dapping punches ranging from 3.0mm (1\/8\") to 50.0mm (2\") in diameter, each with a precisely matched depression in the included 65mm (2-1\/2\") square dapping block, forming a complete 25-piece matched system. Punches are stored on a form-fitting plastic stand that keeps the set organized and protected. Durston part number 1101.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e24 hardened and polished English steel dapping punches\u003c\/li\u003e\n\u003cli\u003ePunch sizes range from 3.0mm (1\/8\") to 50.0mm (2\") in diameter\u003c\/li\u003e\n\u003cli\u003eEach punch has a precisely matched depression in the included dapping block\u003c\/li\u003e\n\u003cli\u003eIncludes one 65mm (2-1\/2\") square dapping block\u003c\/li\u003e\n\u003cli\u003eForm-fitting plastic stand keeps the full set organized\u003c\/li\u003e\n\u003cli\u003eMade by W. Durston Ltd, High Wycombe, Great Britain\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eTotal Pieces\u003c\/th\u003e\n\u003ctd\u003e25 (24 punches + 1 dapping block)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePunch Size Range\u003c\/th\u003e\n\u003ctd\u003e3.0mm (1\/8\") – 50.0mm (2\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePunch Sizes Included\u003c\/th\u003e\n\u003ctd\u003e3.0, 4.0, 5.0, 6.0, 7.0, 8.0, 9.0, 10.0, 11.0, 12.0, 13.0, 14.0, 15.0, 17.0, 19.0, 21.0, 23.0, 25.0, 28.0, 32.0, 36.0, 40.0, 45.0, 50.0mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDapping Block Size\u003c\/th\u003e\n\u003ctd\u003e65mm (2-1\/2\") square\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStand Dimensions\u003c\/th\u003e\n\u003ctd\u003e10\" long × 7\" wide × 6\" high (with punches mounted)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eHardened and polished English steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eMade in England by W. Durston Ltd, High Wycombe, Great Britain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDurston Part Number\u003c\/th\u003e\n\u003ctd\u003e1101\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e24 matched dapping punches (3.0mm – 50.0mm)\u003c\/li\u003e\n\u003cli\u003e1 square 65mm dapping block with 24 matched depressions\u003c\/li\u003e\n\u003cli\u003eForm-fitting plastic storage and display stand\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43579766210774,"sku":"125.008","price":389.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-large-24-punch-matched-dapping-punch-and-die-set-otto-frei.jpg?v=1719958465"},{"product_id":"durston-ring-stretcher-reducer-bender-1302","title":"Durston Ring Stretcher, Reducer \u0026 Bender","description":"\u003cp\u003eThe \u003cstrong\u003eDurston Ring Stretcher, Reducer \u0026amp; Bender\u003c\/strong\u003e is a professional-grade combination tool engineered for jewelers who work with plain wedding bands in gold, silver, platinum, and palladium. Made in Great Britain by Durston (model 1302), this upright tool consolidates three essential ring-working functions into a single bench-mounted unit — stretching, reducing, and bending — eliminating the need for multiple separate tools.\u003c\/p\u003e\u003cp\u003eThe 6-spline stretching mandrel expands on the upstroke of the handle, allowing precise stretching of non-stone-set, non-ferrous plain wedding bands. A double-sided 16-hole band reducing plate accommodates most popular domed band profiles for compression work. A built-in ring bending jig with a single die for domed stock rounds out the tool's capabilities. The unit requires no maintenance and is ready to use straight from the box.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eFor use with non-ferrous metals only (gold, silver, platinum, palladium, etc.). Not suitable for stretching or reducing steel bands.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThree functions in one tool: stretching, reducing, and ring bending\u003c\/li\u003e\n\u003cli\u003e6-spline mandrel expands on the upstroke for controlled band stretching\u003c\/li\u003e\n\u003cli\u003eDouble-sided 16-hole reducing plate for compressing domed-profile bands\u003c\/li\u003e\n\u003cli\u003eBuilt-in ring bending jig with a single die designed for domed stock\u003c\/li\u003e\n\u003cli\u003eUpright bench-mount design with four base mounting holes for secure attachment\u003c\/li\u003e\n\u003cli\u003eNo maintenance required\u003c\/li\u003e\n\u003cli\u003eMade in Great Britain by Durston\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eDurston 1302\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e16-3\/4 in. (425 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFootprint\u003c\/th\u003e\n\u003ctd\u003e6-3\/4 in. × 4-3\/4 in. (170 mm × 120 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStretching Mandrel\u003c\/th\u003e\n\u003ctd\u003e6-spline, expands on upstroke\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReducing Plate\u003c\/th\u003e\n\u003ctd\u003eDouble-sided, 16 holes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Metals\u003c\/th\u003e\n\u003ctd\u003eGold, silver, platinum, palladium (non-ferrous only)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eMade in Great Britain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVariant Count\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eNotes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDesigned for plain, non-stone-set wedding bands only.\u003c\/li\u003e\n\u003cli\u003eNot intended for use with steel or ferrous metal bands.\u003c\/li\u003e\n\u003cli\u003eMounting hardware is not included.\u003c\/li\u003e\n\u003cli\u003eNo instructions are included with this tool.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43579767128278,"sku":"148.327","price":569.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-ring-stretcher-reducer-and-bender-otto-frei.jpg?v=1719958462"},{"product_id":"durston-matched-round-forming-set-block","title":"Durston Matched Round Forming Set and Block","description":"\u003cp\u003eThe Durston Matched Round Forming Set and Block is a precision tool combination designed for forging and bending metal into clean, consistent rounded forms. The set centers on a highly polished, hardened rectangular steel bending block featuring 15 half-round grooves, one 90° V-shaped groove, and 10 holes. Fourteen steel round cylinders are matched to the half-round grooves, enabling rapid, accurate bending of metal stock into curved profiles across a wide range of sizes.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHighly polished hardened rectangular steel bending block\u003c\/li\u003e\n\u003cli\u003e15 half-round grooves ranging from 1 mm to 25 mm\u003c\/li\u003e\n\u003cli\u003eOne 90° V-shaped groove for angular bending\u003c\/li\u003e\n\u003cli\u003e10 holes in the side from 1 mm to 10 mm in 1 mm increments\u003c\/li\u003e\n\u003cli\u003e14 matched steel round cylinders for quick, consistent metal bending\u003c\/li\u003e\n\u003cli\u003eGrooves and cylinders are matched for precise fit and repeatable results\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eBlock Material\u003c\/th\u003e\n\u003ctd\u003eHardened steel, highly polished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlock Shape\u003c\/th\u003e\n\u003ctd\u003eRectangular\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHalf-Round Grooves\u003c\/th\u003e\n\u003ctd\u003e15 grooves: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 12, 16, 19, 22, 25 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eV-Groove\u003c\/th\u003e\n\u003ctd\u003eOne 90° V-shaped groove\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSide Holes\u003c\/th\u003e\n\u003ctd\u003e10 holes, 1–10 mm in 1 mm increments\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncluded Cylinders\u003c\/th\u003e\n\u003ctd\u003e14 matched steel round cylinders\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003e1171\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 hardened steel bending block with 15 half-round grooves, 1 V-groove, and 10 side holes\u003c\/li\u003e\n\u003cli\u003e14 matched steel round cylinders\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eThe bending block is also available separately under part number 125.161.\u003c\/p\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43579811758294,"sku":"125.162","price":298.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-matched-round-forming-set-and-block-otto-frei-1.jpg?v=1719958450"},{"product_id":"durston-1511-small-square-bezel-mandrel-4mm-10mm","title":"Durston 1511 Small Square Bezel Mandrel-4mm x 10mm","description":"\u003cp\u003eThe Durston 1511 Small Square Bezel Mandrel is a precision forming tool designed for jewelers who need consistent, accurate square bezels in small sizes. Made in the UK, this mandrel tapers smoothly from 4 x 4mm at its smallest end to 10 x 10mm at its largest, giving you a reliable range for sizing and shaping square-profile bezels. At 280mm (11\") in total length, it offers comfortable working leverage at the bench.\u003c\/p\u003e\n\n\u003cp\u003eDurston tools are known for their quality construction and precise geometry—this mandrel is no exception. Whether you are forming bezels from sheet metal or sizing an existing setting, the square profile holds its shape true throughout the taper, ensuring clean, even results.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSquare tapered profile for forming and sizing square bezels\u003c\/li\u003e\n\u003cli\u003eSmooth, even taper from smallest to largest dimension\u003c\/li\u003e\n\u003cli\u003eGenerous 280mm (11\") working length for comfortable bench use\u003c\/li\u003e\n\u003cli\u003eMade in the UK to professional jeweler standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSmallest Dimensions\u003c\/th\u003e\n\u003ctd\u003e4 x 4mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLargest Dimensions\u003c\/th\u003e\n\u003ctd\u003e10 x 10mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTotal Length\u003c\/th\u003e\n\u003ctd\u003e280mm (11\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eSquare\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCountry of Origin\u003c\/th\u003e\n\u003ctd\u003eUK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eDurston 1511\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43580915253462,"sku":"143.038","price":47.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-1511-small-square-bezel-mandrel-4mm-x-10mm-otto-frei.jpg?v=1719957909"},{"product_id":"durston-1510-round-bezel-mandrel-3mm-10mm","title":"Durston 1510 Round Bezel Mandrel-3mm to 10mm","description":"\u003cp\u003eThe Durston 1510 Round Bezel Mandrel is a precision-tapered tool designed for forming and sizing round bezels with accuracy and ease. Tapering smoothly from 3 mm to 10 mm, this mandrel gives jewelers and metalsmiths the control they need when shaping small to medium round settings. The smooth surface finish ensures bezels slide and form cleanly without marking or distortion. Made in the UK by W. Durston, this mandrel reflects the quality and craftsmanship the brand is known for in the professional trade.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSmooth taper from 3 mm to 10 mm for precise bezel forming\u003c\/li\u003e\n\u003cli\u003eSmooth surface finish prevents marking or distortion of metal\u003c\/li\u003e\n\u003cli\u003eIdeal for shaping and sizing small to medium round bezels\u003c\/li\u003e\n\u003cli\u003eMade in the UK by W. Durston\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003e1510\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eRound Bezel Mandrel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTaper Range\u003c\/th\u003e\n\u003ctd\u003e3 mm – 10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eMade in the UK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43580923740374,"sku":"143.036","price":43.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-1510-round-bezel-mandrel-3mm-to-10mm-otto-frei.jpg?v=1719957885"},{"product_id":"durston-drm-w130e-wire-rolling-mill-extension-rolls","title":"Durston 1024 DRM W130E Standard Wire Rolling Mill with Extension Rolls","description":"\u003cp\u003eThe Durston DRM W130E Standard Wire Rolling Mill with Extension Rolls is purpose-built for jewelers and metalsmiths who need a dedicated wire reduction solution. Wire rolling mills operate without a reduction gear by design—eliminating the slowdown that occurs during long wire passes and keeping your workflow efficient.\u003c\/p\u003e\u003cp\u003eThe standard wire grooves on this mill produce the traditional diamond-shaped profile used to reduce wire stock before drawing through a draw plate to achieve finished wire. With 11 square wire grooves ranging from 10 mm down to 1 mm, you have a wide range of reduction steps in a single pass-through sequence. The integrated side extension rolls add four half-round \"D\" shape grooves—4, 3, 2, and 1.5 mm—expanding your capability without a separate attachment purchase.\u003c\/p\u003e\u003cp\u003eA 5-to-1 gearbox delivers controlled, consistent torque through 130 mm x 60 mm hardened rollers, supporting a maximum wire capacity of 8 mm and a sheet thickness capacity of 6 mm. At 82 lbs., this is a substantial bench mill built for repeated professional use.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWire-only rolling mill design—no reduction gear required, allowing faster long wire passes\u003c\/li\u003e\n\u003cli\u003e11 square wire grooves ranging from 10 mm to 1 mm for progressive wire reduction\u003c\/li\u003e\n\u003cli\u003eStandard diamond-shaped groove profile prepares wire for draw plate finishing\u003c\/li\u003e\n\u003cli\u003eSide extension rolls include four half-round \"D\" shapes: 4 mm, 3 mm, 2 mm, and 1.5 mm\u003c\/li\u003e\n\u003cli\u003eMaximum wire capacity of 8 mm\u003c\/li\u003e\n\u003cli\u003eSheet thickness capacity of 6 mm\u003c\/li\u003e\n\u003cli\u003e5-to-1 gearbox for consistent, controlled roller torque\u003c\/li\u003e\n\u003cli\u003eRoller size: 130 mm length x 60 mm diameter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eRoll Size\u003c\/th\u003e\n\u003ctd\u003e130 mm x 60 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoller Length\u003c\/th\u003e\n\u003ctd\u003e130 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoller Diameter\u003c\/th\u003e\n\u003ctd\u003e60 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoller Type\u003c\/th\u003e\n\u003ctd\u003eWire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWire Grooves\u003c\/th\u003e\n\u003ctd\u003e11 square grooves, 10 mm – 1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSide Extensions\u003c\/th\u003e\n\u003ctd\u003eFour half-round \"D\" shapes: 4, 3, 2, and 1.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Wire Capacity\u003c\/th\u003e\n\u003ctd\u003e8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheet Thickness Capacity\u003c\/th\u003e\n\u003ctd\u003e6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGear Ratio\u003c\/th\u003e\n\u003ctd\u003e5-to-1 gearbox\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e13-1\/4\" L x 8-3\/4\" W x 14-13\/16\" H (335 mm x 220 mm x 365 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNet Weight\u003c\/th\u003e\n\u003ctd\u003e82 lbs. (36.8 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eNotes\u003c\/h3\u003e\u003cp\u003eThis mill is designed exclusively for wire rolling and does not include flat sheet rollers. The standard groove profile reduces wire to a diamond cross-section suitable for draw plate finishing. For sheet and combination rolling applications, refer to other Durston mill configurations.\u003c\/p\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43581193519318,"sku":"128.133","price":1566.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-1024-drm-w130e-standard-wire-rolling-mill-with-extension-rolls-otto-frei.jpg?v=1719957683"},{"product_id":"durston-drm-c130re-130mm-combination-rolling-mill","title":"Durston 1021 DRM C130RE Combo 130mm Rolling Mill with Reduction Gear \u0026 Extension Rolls","description":"\u003cp\u003eThe Durston DRM C130RE is a professional-grade combination rolling mill engineered for serious jewelers and metalsmiths who demand precision, durability, and long-term value. Part of Durston's acclaimed DRM (Durston Rolling Mill) line — widely recognized as the finest rolling mills ever made — this 130mm combination flat and wire mill is built to exacting standards in Great Britain and delivers exceptional performance across a full range of metalworking applications.\u003c\/p\u003e\n\n\u003cp\u003eThe C130RE features a 5-to-1 reduction gear that makes large passes significantly easier, reducing operator fatigue and improving control over thick stock. Eleven wire grooves ranging from 1mm to 8mm accommodate a broad spectrum of wire gauges, while four half-round side extension rolls (4mm, 3mm, 2mm, and 1.5mm) enable efficient rolling of half-round shanks without additional tooling. Self-lubricating, maintenance-free bearings and hardened helical drive gears with a special drive form ensure smooth, reliable operation over years of heavy use. Calibrated dials on both top wheels with pointer indicators provide precise, easy-to-read gap measurement for consistent, repeatable results.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDurston rolling mills hold their value better than virtually any other tool in the studio — a lasting investment in quality craftsmanship.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCombination flat and wire rolling mill in a single unit\u003c\/li\u003e\n\u003cli\u003e5-to-1 reduction gearbox for easier large-pass rolling\u003c\/li\u003e\n\u003cli\u003e11 wire grooves ranging from 1mm to 8mm\u003c\/li\u003e\n\u003cli\u003eFour half-round side extension rolls: 4mm, 3mm, 2mm, and 1.5mm\u003c\/li\u003e\n\u003cli\u003eSelf-lubricating, maintenance-free bearings\u003c\/li\u003e\n\u003cli\u003eHardened helical drive gears with special form for maximum drive\u003c\/li\u003e\n\u003cli\u003eCalibrated dials on both top wheels with pointer for precise gap measurement\u003c\/li\u003e\n\u003cli\u003eMade in Great Britain\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eRoll Size\u003c\/th\u003e\n\u003ctd\u003e130mm x 60mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoller Length\u003c\/th\u003e\n\u003ctd\u003e130mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoller Diameter\u003c\/th\u003e\n\u003ctd\u003e60mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoller Type\u003c\/th\u003e\n\u003ctd\u003eCombination (flat and wire)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheet Width Capacity\u003c\/th\u003e\n\u003ctd\u003e80mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheet Thickness Capacity\u003c\/th\u003e\n\u003ctd\u003e6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWire Grooves\u003c\/th\u003e\n\u003ctd\u003e11 sizes, 1mm – 8mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Wire Capacity\u003c\/th\u003e\n\u003ctd\u003e8mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGear Ratio\u003c\/th\u003e\n\u003ctd\u003e5-to-1 gearbox\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSide Extensions\u003c\/th\u003e\n\u003ctd\u003eFour half-rounds: 4mm, 3mm, 2mm, and 1.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e16-1\/4\" L x 8-3\/4\" W x 14-1\/4\" H (410mm x 220mm x 365mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNet Weight\u003c\/th\u003e\n\u003ctd\u003e100 lbs. (45.3 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eMade in Great Britain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43581196206294,"sku":"128.130","price":1931.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-drm-c130re-combination-130mm-rolling-mill-with-reduction-gear-and-extension-rolls-otto-frei-1.jpg?v=1719957678"},{"product_id":"durston-drm-c150re-combination-rolling-mill","title":"Durston 1031 DRM C150RE Combination Rolling Mill With Reduction Gear \u0026 Extension Rolls","description":"\u003cp\u003eThe Durston DRM C150RE is a professional-grade combination rolling mill built for jewelers and metalsmiths who demand precision, durability, and long-term value from their bench equipment. Part of the acclaimed DRM (Durston Rolling Mill) line, this mill is widely regarded as among the finest rolling mills ever manufactured. The C150RE combines flat sheet rolling and wire rolling in a single unit, with the added capability of a reduction gear and side extension rolls for half-round shank production.\u003c\/p\u003e\n\n\u003cp\u003eThe 5-to-1 reduction gearbox makes large passes significantly easier, reducing operator fatigue when working with thick stock or harder metals. Calibrated dials on both top wheels with pointers allow for precise, repeatable gap measurement — an essential feature for production work. Self-lubricating, maintenance-free bearings and hardened helical drive gears with a special form deliver maximum drive efficiency and lasting performance. \u003cstrong\u003eMade in Great Britain.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCombination flat and wire rolling mill in a single unit\u003c\/li\u003e\n\u003cli\u003e5-to-1 reduction gearbox eases large passes and reduces operator fatigue\u003c\/li\u003e\n\u003cli\u003eSide extension rolls enable easy rolling of half-round shanks in four sizes\u003c\/li\u003e\n\u003cli\u003e11 square wire grooves ranging from 8 mm down to 1 mm\u003c\/li\u003e\n\u003cli\u003eCalibrated dials on both top wheels with pointer for precise gap measurement\u003c\/li\u003e\n\u003cli\u003eSelf-lubricating, maintenance-free bearings\u003c\/li\u003e\n\u003cli\u003eHardened helical drive gears with special form for maximum drive\u003c\/li\u003e\n\u003cli\u003eMade in Great Britain\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eRoll Size\u003c\/th\u003e\n\u003ctd\u003e150 mm × 60 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoller Length\u003c\/th\u003e\n\u003ctd\u003e150 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoller Diameter\u003c\/th\u003e\n\u003ctd\u003e60 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoller Type\u003c\/th\u003e\n\u003ctd\u003eCombination (flat and wire)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheet Width Capacity\u003c\/th\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheet Thickness Capacity\u003c\/th\u003e\n\u003ctd\u003e6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Wire Capacity\u003c\/th\u003e\n\u003ctd\u003e8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWire Grooves\u003c\/th\u003e\n\u003ctd\u003e11 square grooves, 8 mm – 1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGear Ratio\u003c\/th\u003e\n\u003ctd\u003e5-to-1 gearbox\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSide Extension Rolls\u003c\/th\u003e\n\u003ctd\u003eFour half-rounds: 4 mm, 3 mm, 2 mm, 1.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e17\" L × 8-3\/4\" W × 14-1\/4\" H (430 mm × 220 mm × 365 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNet Weight\u003c\/th\u003e\n\u003ctd\u003e104 lbs. (47.3 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eGreat Britain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43581196501206,"sku":"128.118N","price":2178.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-1031-drm-c150re-combination-rolling-mill-with-reduction-gear-and-extension-rolls-otto-frei.jpg?v=1689354000"},{"product_id":"durston-21-punch-medium-dapping-set","title":"Durston 21 Punch Medium Matched Dapping Punch \u0026 Die Set","description":"\u003cp\u003eThe Durston 21 Punch Medium Matched Dapping Punch \u0026amp; Die Set delivers professional-grade forming capability in a well-organized, compact package. Manufactured by W. Durston Ltd of High Wycombe, Great Britain, each punch is made from properly hardened, highly polished English steel built for a lifetime of use. This medium set pairs 21 graduated punches with a 50mm (2\") square dapping block, offering exceptional quality that rivals European competitors at a fraction of the price.\u003c\/p\u003e\n\n\u003cp\u003eThe set spans a wide size range — from 3.0mm (1\/8\") up to 36.0mm (1-3\/8\") — covering the most commonly needed forming sizes for doming discs, bezels, and decorative metalwork. Each punch corresponds precisely to a matching depression in the square die block, ensuring clean, consistent hemispheres every time. The set is equivalent to the Durston Large Matched Dapping Set (125.008) minus the three largest dies.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e21 matched dapping punches ranging from 3.0mm (1\/8\") to 36.0mm (1-3\/8\")\u003c\/li\u003e\n  \u003cli\u003eEach punch has a precisely corresponding depression in the square die block\u003c\/li\u003e\n  \u003cli\u003eHardened and highly polished top-quality English steel construction\u003c\/li\u003e\n  \u003cli\u003e50mm (2\") square dapping die block included\u003c\/li\u003e\n  \u003cli\u003eForm-fitting plastic storage stand keeps the set organized and protected\u003c\/li\u003e\n  \u003cli\u003eStand measures 8-1\/2\" long × 5-1\/2\" wide; stands 5-1\/2\" high when punches are mounted\u003c\/li\u003e\n  \u003cli\u003eManufactured by W. Durston Ltd, High Wycombe, Great Britain\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003ePunch Count\u003c\/th\u003e\n\u003ctd\u003e21\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSize Range\u003c\/th\u003e\n\u003ctd\u003e3.0mm (1\/8\") – 36.0mm (1-3\/8\")\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDie Block Size\u003c\/th\u003e\n\u003ctd\u003e50mm (2\") square\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eHardened, polished English steel\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eStand Dimensions\u003c\/th\u003e\n\u003ctd\u003e8-1\/2\" L × 5-1\/2\" W × 5-1\/2\" H (with punches mounted)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCountry of Origin\u003c\/th\u003e\n\u003ctd\u003eGreat Britain\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eW. Durston Ltd, High Wycombe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e21 matched dapping punches: 3.0mm, 4.0mm, 5.0mm, 6.0mm, 7.0mm, 8.0mm, 9.0mm, 10.0mm, 11.0mm, 12.0mm, 13.0mm, 14.0mm, 15.0mm, 17.0mm, 19.0mm, 21.0mm, 23.0mm, 25.0mm, 28.0mm, 32.0mm, and 36.0mm\u003c\/li\u003e\n  \u003cli\u003e50mm (2\") square dapping die block\u003c\/li\u003e\n  \u003cli\u003eForm-fitting plastic storage stand\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eThis medium set is identical to the Durston Large Matched Dapping Punch \u0026amp; Die Set (125.008) with the exception that the three largest die sizes are not included.\u003c\/p\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43581196927190,"sku":"125.009","price":318.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-21-punch-medium-matched-dapping-punch-and-die-set-otto-frei.jpg?v=1719957678"},{"product_id":"durston-drm-f150re-flat-rolling-mill-150mm","title":"Durston 1032 DRM F150RE Flat 150mm Rolling Mill with Reduction Gear \u0026 Extension Rolls","description":"\u003cp\u003eThe Durston DRM F150RE is a professional-grade flat rolling mill engineered for jewelers and metalsmiths who demand precision, durability, and long-term value. Part of Durston's flagship DRM (Durston Rolling Mill) line, this 150mm all-flat sheet rolling mill is widely regarded as among the finest rolling mills available. Built in Great Britain, the F150RE combines a robust reduction gear with integrated extension rolls for versatile studio use.\u003c\/p\u003e\n\n\u003cp\u003eA 5-to-1 reduction gearbox makes large passes significantly easier, reducing operator fatigue when working with heavier gauges or harder metals. The hardened helical drive gears feature a special tooth form designed for maximum drive efficiency and long service life. Self-lubricating, maintenance-free bearings keep the mill running smoothly without ongoing upkeep. Calibrated dials on both top wheels, each fitted with a precision pointer, allow for accurate and repeatable gap measurement at a glance.\u003c\/p\u003e\n\n\u003cp\u003eThe included side extension rolls provide four half-round profiles—4mm, 3mm, 2mm, and 1.5mm—making it straightforward to roll half-round wire and shanks without a separate tool. \u003cstrong\u003eMade in Great Britain.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e150mm all-flat (sheet) roller configuration\u003c\/li\u003e\n\u003cli\u003e5-to-1 reduction gearbox for easier large passes\u003c\/li\u003e\n\u003cli\u003eHardened helical drive gears with special form for maximum drive efficiency\u003c\/li\u003e\n\u003cli\u003eSelf-lubricating, maintenance-free bearings\u003c\/li\u003e\n\u003cli\u003eCalibrated dials on both top wheels with precision pointers for accurate gap measurement\u003c\/li\u003e\n\u003cli\u003eIntegrated side extension rolls with four half-round profiles: 4mm, 3mm, 2mm, and 1.5mm\u003c\/li\u003e\n\u003cli\u003eMade in Great Britain\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003e1032 DRM F150RE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoll Size\u003c\/th\u003e\n\u003ctd\u003e150 mm × 60 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoller Length\u003c\/th\u003e\n\u003ctd\u003e150 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoller Diameter\u003c\/th\u003e\n\u003ctd\u003e60 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheet Thickness Capacity\u003c\/th\u003e\n\u003ctd\u003e6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGear Ratio\u003c\/th\u003e\n\u003ctd\u003e5-to-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSide Extension Profiles\u003c\/th\u003e\n\u003ctd\u003eHalf-round: 4 mm, 3 mm, 2 mm, 1.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e110 lbs.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eGreat Britain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43581203185878,"sku":"128.119N","price":2134.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-1032-drm-f150re-flat-150mm-rolling-mill-with-reduction-gear-and-extension-rolls-otto-frei.jpg?v=1689354010"},{"product_id":"durston-ddb-1800-draw-bench-72in","title":"Durston 1191 DDB 1800 Draw Bench 72\"","description":"\u003cp\u003ePulling wire through a draw plate is a demanding task, and nearly impossible when making long pulls on thick wire. The Durston DDB 1800 is the largest of the three Durston floor-standing draw benches, offering a generous 72\" overall length and a 1350mm (53-1\/8\") working length to handle even the most demanding wire-drawing operations in a professional goldsmith's workshop.\u003c\/p\u003e\n\u003cp\u003eThe DDB 1800 features a two-speed drive system: operate from one side of the bench for a direct 1-to-1 crank for lighter diameter wire, or switch to the other side for a 4-to-1 reduction when tackling heavier wire pulls. This versatility makes it well-suited to a wide range of wire gauges, up to 10mm in diameter. Made in England by Durston, this bench is built to professional standards for long-term studio use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDraw tongs, draw bench rings, and draw plates are sold separately.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwo-speed drive system: direct 1-to-1 crank or 4-to-1 reduction for heavy pulls\u003c\/li\u003e\n\u003cli\u003e1350mm (53-1\/8\") working length\u003c\/li\u003e\n\u003cli\u003ePulls wire up to 10mm in diameter\u003c\/li\u003e\n\u003cli\u003eLargest of the three Durston floor-standing draw bench models\u003c\/li\u003e\n\u003cli\u003eMade in England\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShips by truck freight only\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eDurston DDB 1800 (1191)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall Length\u003c\/th\u003e\n\u003ctd\u003e72\" (1825mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall Width\u003c\/th\u003e\n\u003ctd\u003e22\" (577mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall Height\u003c\/th\u003e\n\u003ctd\u003e38-1\/8\" (958mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking Length\u003c\/th\u003e\n\u003ctd\u003e1350mm (53-1\/8\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Wire Diameter\u003c\/th\u003e\n\u003ctd\u003e10mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive Speeds\u003c\/th\u003e\n\u003ctd\u003e2 – direct 1:1 and 4:1 reduction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eMade in England\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping Method\u003c\/th\u003e\n\u003ctd\u003eTruck freight only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eDraw tongs, draw bench rings, and draw plates are sold separately and are required for operation. Compatible draw tong and ring accessories are available from Durston and other suppliers — consult OttoFrei.com for current offerings. Overall height (38-1\/8\") and width (22\") dimensions are identical across all three Durston floor-standing draw bench models.\u003c\/p\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43581203611862,"sku":"127.210","price":1817.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/127.210NEW_thumb_8d26519c-d683-4783-a0fb-915c10158d43.jpg?v=1750793886"},{"product_id":"durston-drm-round150re-rolling-mill-reduction-gear-extension-rolls","title":"Durston 1045 DRM-Round150RE Rolling Mill with Reduction Gear \u0026 Extension Rolls","description":"\u003cp\u003eDurston is the first manufacturer to offer a rolling mill with \u003cstrong\u003efull round wire rolls\u003c\/strong\u003e, making it possible to produce true round wire with few — or in many cases, no — passes through a draw plate. Traditional wire rolling mills form wire in a diamond or triangular profile, requiring additional draw plate work to achieve a round cross-section. The DRM-Round150RE changes that: its full half-round groove geometry produces genuinely round wire directly off the mill. A slight flash may occur at the seam between the two half-round shapes, and a single pass through a round draw plate will clean that up, but for many applications the wire comes off the mill ready to use.\u003c\/p\u003e\u003cp\u003eThe 150mm roller length and \u003cstrong\u003e5-to-1 reduction gearbox\u003c\/strong\u003e make significant wire size reductions far easier, reducing operator effort and delivering consistent, repeatable results. Eighteen round wire grooves ranging from 1 mm to 10 mm cover the most common jewelry wire sizes. The integrated \u003cstrong\u003eside extension rolls\u003c\/strong\u003e provide four half-round shank profiles — 4 mm, 3 mm, 2 mm, and 1.5 mm — for rolling half-round shanks without a separate tool setup.\u003c\/p\u003e\u003cp\u003eSelf-lubricating, maintenance-free bearings keep the mill running smoothly over years of heavy use. \u003cstrong\u003eHardened helical drive gears\u003c\/strong\u003e with a special tooth form deliver maximum drive efficiency and long service life. Calibrated dials on both top wheels with pointer indicators allow precise, easy-to-read gap measurement for accurate, repeatable reductions.\u003c\/p\u003e\u003cp\u003eDurston rolling mills are widely recognized for holding their value better than virtually any other jewelry tool investment. \u003cem\u003eMade in Great Britain.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFirst rolling mill to offer full round wire rolls for true round wire output\u003c\/li\u003e\n\u003cli\u003e18 round wire grooves from 1 mm to 10 mm cover the full range of common jewelry wire sizes\u003c\/li\u003e\n\u003cli\u003e5-to-1 reduction gearbox significantly reduces the effort required for large wire reductions\u003c\/li\u003e\n\u003cli\u003eSide extension rolls include four half-round profiles: 4 mm, 3 mm, 2 mm, and 1.5 mm\u003c\/li\u003e\n\u003cli\u003eSelf-lubricating, maintenance-free bearings for long-term reliability\u003c\/li\u003e\n\u003cli\u003eHardened helical drive gears with special tooth form for maximum drive efficiency\u003c\/li\u003e\n\u003cli\u003eCalibrated dials on both top wheels with pointer for precise gap measurement\u003c\/li\u003e\n\u003cli\u003eMade in Great Britain\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eRoll Size\u003c\/th\u003e\n\u003ctd\u003e150 mm × 60 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoller Type\u003c\/th\u003e\n\u003ctd\u003eFull Round\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoller Length\u003c\/th\u003e\n\u003ctd\u003e150 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoller Diameter\u003c\/th\u003e\n\u003ctd\u003e60 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWire Grooves\u003c\/th\u003e\n\u003ctd\u003e18 round sizes, 1 mm – 10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Wire Capacity\u003c\/th\u003e\n\u003ctd\u003e10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheet Thickness Capacity\u003c\/th\u003e\n\u003ctd\u003e6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGear Ratio\u003c\/th\u003e\n\u003ctd\u003e5-to-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSide Extension Profiles\u003c\/th\u003e\n\u003ctd\u003eHalf-round: 4 mm, 3 mm, 2 mm, 1.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e17\" L × 8-3\/4\" W × 10-1\/2\" H (430 mm × 220 mm × 265 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNet Weight\u003c\/th\u003e\n\u003ctd\u003e104 lbs. (47.3 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eMade in Great Britain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43581204201686,"sku":"128.144","price":2433.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-1045-drm-round150re-rolling-mill-with-reduction-gear-and-extension-rolls-otto-frei.jpg?v=1689354013"},{"product_id":"durston-1301-ring-stretcher-reducer-6-spline-16-hole","title":"Durston 1301 Ring Stretcher \u0026 Reducer","description":"\u003cp\u003eThe \u003cstrong\u003eDurston 1301 Ring Stretcher \u0026amp; Reducer\u003c\/strong\u003e is a professional-grade upright tool made in England for stretching and reducing plain wedding ring bands with precision and ease. Built for daily bench use, this sturdy unit requires no maintenance and delivers consistent results on non-ferrous metal bands.\u003c\/p\u003e\u003cp\u003eThe tool features a \u003cstrong\u003e6-spline stretching mandrel\u003c\/strong\u003e that expands on the upstroke of the handle, allowing smooth, controlled stretching of plain, non-stone-set wedding bands. The mandrel is marked in \u003cstrong\u003eUSA sizes 2 to 14\u003c\/strong\u003e for quick reference during sizing work. A \u003cstrong\u003edouble-sided 16-hole band reducing plate\u003c\/strong\u003e is included, accommodating most popular domed-shaped bands for compression and reduction.\u003c\/p\u003e\u003cp\u003eThe base includes four mounting holes for securing the unit to a bench or worktable for added stability during use. Mounting hardware is not included.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eFor use with non-ferrous metals only (gold, silver, platinum, palladium, etc.). Not suitable for stretching or reducing steel bands. No instructions are included with this tool.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eUpright ring stretcher and reducer design for bench-top use\u003c\/li\u003e\n\u003cli\u003e6-spline mandrel expands on the upstroke for controlled band stretching\u003c\/li\u003e\n\u003cli\u003eMandrel marked in USA ring sizes 2 to 14\u003c\/li\u003e\n\u003cli\u003eDouble-sided 16-hole band reducing plate for domed-shaped bands\u003c\/li\u003e\n\u003cli\u003eFour base mounting holes for secure bench or worktable attachment\u003c\/li\u003e\n\u003cli\u003eNo maintenance required\u003c\/li\u003e\n\u003cli\u003eMade in England\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eDurston 1301\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e16-3\/4 in (425 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase Footprint\u003c\/th\u003e\n\u003ctd\u003e6-3\/4 in × 4-3\/4 in (170 mm × 120 mm), oval\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMandrel Type\u003c\/th\u003e\n\u003ctd\u003e6-spline stretching mandrel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize Range (Mandrel)\u003c\/th\u003e\n\u003ctd\u003eUSA sizes 2–14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReducing Plate\u003c\/th\u003e\n\u003ctd\u003eDouble-sided, 16 holes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Metals\u003c\/th\u003e\n\u003ctd\u003eNon-ferrous metals only (gold, silver, platinum, palladium, etc.)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting Holes\u003c\/th\u003e\n\u003ctd\u003e4 (mounting hardware not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eMade in England\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDurston 1301 Ring Stretcher \u0026amp; Reducer\u003c\/li\u003e\n\u003cli\u003e6-spline stretching mandrel\u003c\/li\u003e\n\u003cli\u003eDouble-sided 16-hole band reducing plate\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eNotes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNot for use on steel or ferrous metal bands\u003c\/li\u003e\n\u003cli\u003eNot suitable for stone-set rings\u003c\/li\u003e\n\u003cli\u003eMounting hardware is not included\u003c\/li\u003e\n\u003cli\u003eNo instructions are included with this tool\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43581205512406,"sku":"148.325","price":466.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-1301-ring-stretcher-and-reducer-otto-frei.jpg?v=1689354014"},{"product_id":"durston-ddb-1400-draw-bench-54in","title":"Durston 1190 DDB 1400 Draw Bench 54\"","description":"\u003cp\u003eThe Durston DDB 1400 is a professional-grade floor-standing draw bench engineered for jewelers, goldsmiths, and metalsmiths who demand reliable performance when drawing wire. Pulling wire through a draw plate—especially on long runs or with heavier gauge stock—requires serious mechanical advantage. The DDB 1400 delivers exactly that with a dual-speed drive system: operate it in direct 1-to-1 mode for lighter diameter wire, or switch to the 4-to-1 reduction drive for demanding pulls on thicker wire. Simply crank from one side of the bench for direct drive, or move to the opposite side to engage the reduction gear.\u003c\/p\u003e\u003cp\u003eAt 54 inches in length, the DDB 1400 is the mid-size model in Durston's lineup of three floor-standing draw benches. It shares the same overall height and width dimensions as its siblings, making it a versatile fit for a well-equipped workshop where bench footprint matters. With a 950mm (37-3\/8 inch) working length and the capacity to pull wire up to 10mm in diameter, this bench handles a broad range of wire-drawing tasks. Made in England to Durston's exacting standards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Draw tongs, draw rings, and draw plates are sold separately. Ships by truck freight only.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDual-speed drive system: direct 1-to-1 crank or 4-to-1 reduction for heavy wire pulls\u003c\/li\u003e\n\u003cli\u003e950mm (37-3\/8 in) working length accommodates long draw runs\u003c\/li\u003e\n\u003cli\u003ePulls wire up to 10mm in diameter\u003c\/li\u003e\n\u003cli\u003eMid-size floor-standing model in the Durston draw bench lineup\u003c\/li\u003e\n\u003cli\u003eCrank side selection determines drive ratio — no additional tools required to switch\u003c\/li\u003e\n\u003cli\u003eMade in England\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eDurston DDB 1400\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e54 in (1370mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e22 in (577mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e38-1\/8 in (958mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking Length\u003c\/th\u003e\n\u003ctd\u003e950mm (37-3\/8 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Wire Diameter\u003c\/th\u003e\n\u003ctd\u003e10mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive Ratios\u003c\/th\u003e\n\u003ctd\u003e1:1 direct drive; 4:1 reduction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eMade in England\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping Method\u003c\/th\u003e\n\u003ctd\u003eTruck freight only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eNotes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDraw tongs, draw rings, and draw plates are sold separately and are required for operation.\u003c\/li\u003e\n\u003cli\u003eCompatible accessory options include integrated draw tongs with hook, draw bench rings, draw tongs with curved arms, and German-style draw tongs (German draw tongs may require modifications).\u003c\/li\u003e\n\u003cli\u003eThis item ships by truck freight only — standard parcel shipping is not available.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43581205709014,"sku":"127.208","price":1617.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/127.208NEW_thumb_34322d54-c71a-4076-9378-f67f613c876f.jpg?v=1750800187"},{"product_id":"durston-drm-130-double-sided-power-rolling-mill-110v","title":"Durston 1074 Power Mill-DRM-130 Double Sided-1-1\/2HP-110V","description":"\u003cp\u003e\u003cstrong\u003eDouble-sided versatility in a compact power mill.\u003c\/strong\u003e The Durston DRM-130 powered rolling mill provides a full 130 mm flat roll on one side and a dedicated 130 mm wire roll on the other. Built on a one-piece cast iron frame with cast iron base and gearbox cover, the DRM series delivers strength, rigidity, and long service life for production shops and schools.\u003c\/p\u003e\n\n\u003cp\u003eDRM power mills use cast iron bases and gearbox covers for maximum rigidity and pair high-quality steel rolls running in heavy-duty roller bearings with a powerful, near-silent motor and variable-speed epi-cyclic drive.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull 130 mm flat\u003c\/strong\u003e roll plus \u003cstrong\u003e130 mm wire\u003c\/strong\u003e roll on a single machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwedish roll steel\u003c\/strong\u003e hardened to RC 63\/64\u003c\/li\u003e\n\u003cli\u003ePowerful 1.5 HP (1.1 kW) \u003cstrong\u003e110 V\u003c\/strong\u003e motor rated for continuous operation\u003c\/li\u003e\n\u003cli\u003eDigitally controlled variable speed: \u003cstrong\u003e5–30 rpm\u003c\/strong\u003e, forward and reverse\u003c\/li\u003e\n\u003cli\u003eForward \u0026amp; reverse buttons with incremental speed up\/down control\u003c\/li\u003e\n\u003cli\u003eEmergency stop button, front\/rear safety bars, and guarded extension rollers\u003c\/li\u003e\n\u003cli\u003eEasy-read calibrated roll-gap disc for exact gap measurement\u003c\/li\u003e\n\u003cli\u003eMaximum operating thickness: \u003cstrong\u003e6 mm\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eOne-piece cast iron frame with cast iron base and gearbox cover\u003c\/li\u003e\n\u003cli\u003e1-year factory warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eMotor\u003c\/th\u003e\n\u003ctd\u003e1.1 kW (1.5 HP), 110 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpeed Range\u003c\/th\u003e\n\u003ctd\u003e5–30 rpm, forward \u0026amp; reverse\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoller Length\u003c\/th\u003e\n\u003ctd\u003e130 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoller Diameter\u003c\/th\u003e\n\u003ctd\u003e65 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoller Type\u003c\/th\u003e\n\u003ctd\u003eCombination — full 130 mm flat + 130 mm wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheet Thickness Capacity\u003c\/th\u003e\n\u003ctd\u003e6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWire Grooves\u003c\/th\u003e\n\u003ctd\u003e19 square sizes, 1 mm – 10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax Wire Capacity\u003c\/th\u003e\n\u003ctd\u003e10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSide Extensions\u003c\/th\u003e\n\u003ctd\u003eRight: 4, 3, 2, 1.5 mm \"D\" grooves; Left: 8, 6, 3.5 mm \"D\" grooves\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall Dimensions\u003c\/th\u003e\n\u003ctd\u003e32-5\/8\" × 15-3\/8\" × 21-1\/4\" H (830 × 390 × 540 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNet Weight\u003c\/th\u003e\n\u003ctd\u003e396 lb (180 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e1 year factory warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eFor inside financing on Durston Power Mills, contact Wyatt Frei at 800-772-3456 x107 or \u003ca href=\"mailto:wyatt@ottofrei.com\"\u003ewyatt@OttoFrei.com\u003c\/a\u003e.\u003c\/p\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43581305225430,"sku":"128.139","price":6481.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-1074-power-mill-drm-130-double-sided-1-12hp-110v-otto-frei.jpg?v=1689354130"},{"product_id":"durston-70mm-large-die-block","title":"Durston 1151 Large 70mm Die Block Only","description":"\u003cp\u003eThe Durston Large 70mm Die Block is a precision-engineered dapping block machined from high-quality tool steel. Hardened and highly polished, this block is designed to reduce finishing time and deliver consistent, professional results. Featuring 26 hemispheres ranging from 3mm to 52mm, it provides a wide range of forming options for jewelers and metalsmiths working with domed shapes and hollow forms.\u003c\/p\u003e\n\u003cp\u003eThis block is sold individually and matches Set 125.008NB, making it an ideal replacement or supplementary block for that set.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMachined from high-quality tool steel for durability and precision\u003c\/li\u003e\n\u003cli\u003eHardened and highly polished surface to minimize finishing work\u003c\/li\u003e\n\u003cli\u003e26 hemispheres spanning 3mm to 52mm for versatile forming\u003c\/li\u003e\n\u003cli\u003e70mm square block format for stable, controlled use at the bench\u003c\/li\u003e\n\u003cli\u003eCompatible with Durston Set 125.008NB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBlock Size\u003c\/th\u003e\n\u003ctd\u003e70mm square\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNumber of Hemispheres\u003c\/th\u003e\n\u003ctd\u003e26\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHemisphere Range\u003c\/th\u003e\n\u003ctd\u003e3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 19mm, 21mm, 23mm, 25mm, 27mm, 30mm, 34mm, 38mm, 42mm, 47mm \u0026amp; 52mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eTool steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHardened and highly polished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Set\u003c\/th\u003e\n\u003ctd\u003eDurston Set 125.008NB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003e1151\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eThis listing is for the die block only. Dapping punches and additional accessories are sold separately. This block is designed to match Durston Set 125.008NB.\u003c\/p\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43581308043478,"sku":"125.008BLK","price":171.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-large-70mm-die-block-otto-frei-1.jpg?v=1719957604"},{"product_id":"durston-c100-9-mini-combination-rolling-mill","title":"Durston 1003 C100-9 Mini Combo Mini Rolling Mill with Extension Rolls","description":"\u003cp\u003eThe \u003cstrong\u003eDurston C100-9 Mini Combination Rolling Mill\u003c\/strong\u003e is a compact, direct-drive 100 mm mill engineered for small, busy shops that need versatile metal-forming capability without sacrificing floor space. Featuring 9 square wire grooves and a set of half-round extension rollers, this mill handles both sheet rolling and wire reduction in a single unit — making it an efficient workhorse for jewelers and metalsmiths who demand flexibility.\u003c\/p\u003e\u003cp\u003eThe extension rollers are designed to \u003cem\u003ereduce\u003c\/em\u003e half-round wire rather than produce it from scratch, allowing you to work down existing half-round or round wire stock into the precise half-round dimensions needed for ring sizing. This eliminates the need to stock every gauge of half-round wire in gold or other precious metals.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e100 mm combination rolling mill with integrated wire and sheet capability\u003c\/li\u003e\n\u003cli\u003e9 square wire grooves ranging from 1 mm to 6.5 mm\u003c\/li\u003e\n\u003cli\u003e70 mm flat rolling surface for sheet stock\u003c\/li\u003e\n\u003cli\u003eDirect-drive gearbox — no reduction gear\u003c\/li\u003e\n\u003cli\u003eFour half-round side extension rollers: 4 mm, 3 mm, 2 mm, and 1.5 mm\u003c\/li\u003e\n\u003cli\u003eExtension rollers reduce half-round or round wire into half-round stock for ring sizing\u003c\/li\u003e\n\u003cli\u003eCompact footprint well-suited to smaller studio and bench environments\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eRoll Size\u003c\/th\u003e\n\u003ctd\u003e100 mm × 45 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoller Width\u003c\/th\u003e\n\u003ctd\u003e100 mm (70 mm flat \/ 30 mm wire)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoller Diameter\u003c\/th\u003e\n\u003ctd\u003e45 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheet Thickness Capacity\u003c\/th\u003e\n\u003ctd\u003e5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWire Grooves\u003c\/th\u003e\n\u003ctd\u003e9 square grooves, 1 mm – 6.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Wire Capacity\u003c\/th\u003e\n\u003ctd\u003e6.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSide Extension Rollers\u003c\/th\u003e\n\u003ctd\u003eHalf-round: 4 mm, 3 mm, 2 mm, 1.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGear Ratio\u003c\/th\u003e\n\u003ctd\u003eDirect drive (no reduction gear)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e11\" L × 6-3\/4\" W × 10-3\/4\" H (280 mm × 170 mm × 270 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNet Weight\u003c\/th\u003e\n\u003ctd\u003e34 lbs (15.5 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43581334323414,"sku":"128.100-10","price":811.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-c100mm-combination-minimill-9-wire-otto-frei.jpg?v=1719957590"},{"product_id":"durston-rolling-mill-cabinet-stand","title":"Durston Cabinet Style Rolling Mill Stand","description":"\u003cp\u003eThe Durston Cabinet Style Rolling Mill Stand is a purpose-built, lockable cabinet stand designed to support a wide range of Durston rolling mills. Pre-drilled for precise alignment, it provides a stable, organized workspace for demanding studio and shop environments.\u003c\/p\u003e\n\n\u003cp\u003eThe stand is pre-drilled to fit the Durston D2-130 and D4-158 stacked mills, as well as all Durston DRM 100, 130, and 150 rolling mills and all Durston Mini-Mills. This version will also fit the C140 and Agile mills, though only 2 holes will line up. The Agile can be mounted using 2 holes, or the top can be drilled to accommodate additional holes if desired.\u003c\/p\u003e\n\n\u003cp\u003eFor the Olivia Rolling Mill, the cabinet door will be obstructed by the turning wheel. The stand will need to face the opposite direction so the door can open fully.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePre-drilled to fit Durston D2-130, D4-158, DRM 100, DRM 130, DRM 150, and all Durston Mini-Mills\u003c\/li\u003e\n\u003cli\u003eCompatible with C140 and Agile mills (2 holes align; top can be drilled for additional holes)\u003c\/li\u003e\n\u003cli\u003eLockable cabinet door for secure storage\u003c\/li\u003e\n\u003cli\u003eIncludes one interior shelf\u003c\/li\u003e\n\u003cli\u003eCabinet-style design keeps rolling mill accessories organized and accessible\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePlatform Size\u003c\/th\u003e\n\u003ctd\u003e9-1\/2\" × 11-3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e36\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase Size\u003c\/th\u003e\n\u003ctd\u003e13-3\/4\" × 13-3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShelves\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLockable\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVariant Count\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFloor mounting hardware is \u003cstrong\u003enot included\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eFor studios where floor or pedestal mounting is not possible, a practical alternative is to mount the stand onto a sheet of 1\/2\" or 3\/4\" plywood cut at least 6 feet long and 3 feet wide. Center the stand on the plank so that the rolling mill handle grip runs perpendicular to the long dimension. This provides ample support for rolling tasks.\u003c\/li\u003e\n\u003cli\u003eOlivia Rolling Mill users: orient the stand so the door faces away from the turning wheel to allow full door clearance.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43581359620310,"sku":"128.117","price":372.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-cabinet-style-rolling-mill-stand-otto-frei-1.jpg?v=1719957578"},{"product_id":"durston-1195-heavy-duty-12-guillotine-shear","title":"Durston 1195 Heavy Duty 12\" Guillotine Shear","description":"\u003cp\u003eThe Durston 1195 Heavy Duty 12\" Guillotine Shear is a true workhorse built for the demands of professional jewelry shops and institutional use alike. Engineered to last a lifetime, this shear delivers precision, repeatability, and exceptional cutting capacity in a robust, well-designed package.\u003c\/p\u003e\n\u003cp\u003eCapable of cutting non-ferrous metal up to 300mm (12\") wide by 4mm (0.156\" \/ 8 gauge) thick, and mild steel up to 2.5mm (12 gauge) thick, this shear handles serious sheet metal work with ease. The precision ground, hardened, and tempered blade is designed for longevity—it can be rotated four times before sharpening is required, delivering an extended service life across heavy professional use.\u003c\/p\u003e\n\u003cp\u003eThe open back design accommodates sheet metal of any length, while the long pulling bar reduces the effort required for each cut. A front-mounted guard keeps the operator protected during use. The easy-to-read adjustable 12\" ruler rod with an adjustable stop enables repeatable cuts up to 12\" in length—simply remove the stop when longer cuts are needed. The squared front features two tightening screws for secure, consistent positioning.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCuts non-ferrous metal up to 300mm (12\") wide by 4mm (0.156\" \/ 8 gauge) thick\u003c\/li\u003e\n\u003cli\u003eCuts mild steel up to 2.5mm (12 gauge) thick\u003c\/li\u003e\n\u003cli\u003ePrecision ground, hardened, and tempered blade\u003c\/li\u003e\n\u003cli\u003eBlade rotates four times before sharpening is required\u003c\/li\u003e\n\u003cli\u003eOpen back design accepts sheet metal of any length\u003c\/li\u003e\n\u003cli\u003eLong pulling bar for reduced cutting effort\u003c\/li\u003e\n\u003cli\u003eFront-mounted blade guard for operator safety\u003c\/li\u003e\n\u003cli\u003eAdjustable 12\" ruler rod with removable stop for repeatable cuts\u003c\/li\u003e\n\u003cli\u003eSquared front with two tightening screws\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eDurston 1195\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Cut Width (Non-Ferrous)\u003c\/th\u003e\n\u003ctd\u003e300mm (12\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Cut Thickness (Non-Ferrous)\u003c\/th\u003e\n\u003ctd\u003e4mm (0.156\" \/ 8 gauge)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Cut Thickness (Mild Steel)\u003c\/th\u003e\n\u003ctd\u003e2.5mm (12 gauge)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase Dimensions\u003c\/th\u003e\n\u003ctd\u003e470mm x 210mm (18-1\/2\" x 8-1\/4\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall Dimensions (excluding handle)\u003c\/th\u003e\n\u003ctd\u003e625mm x 470mm (24-1\/2\" x 18-1\/2\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRuler Rod Capacity\u003c\/th\u003e\n\u003ctd\u003eUp to 12\" (adjustable stop; removable for longer cuts)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43582040539350,"sku":"153.909","price":2004.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-1195-heavy-duty-12-guillotine-shear-otto-frei.jpg?v=1719957290"},{"product_id":"durston-6694-full-body-leather-bib-apron","title":"Durston 6694 Full Body Leather Bib Apron","description":"\u003cp\u003eThe Durston 6694 Full Body Leather Bib Apron is a rugged workman-style apron cut from heavy-duty yet supple cowhide. Built for demanding bench and studio environments, it provides serious protection against sparks, metal shavings, and general shop hazards — tougher than denim and made to last through hard daily use. The unfinished edges give it a distinctly rustic character while keeping the construction straightforward and durable.\u003c\/p\u003e\u003cp\u003eThis full-body bib apron ties in the back and features a clip closure at the neck for a secure, adjustable fit. It is designed for comfort even during extended wear sessions. There are no pockets, keeping the profile clean and unencumbered. A reliable choice for jewelers, metalsmiths, welders, and anyone working around open flame, hot metal, or abrasive materials.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull-body bib apron style with complete front coverage\u003c\/li\u003e\n\u003cli\u003eCut from heavy-duty, supple cowhide leather\u003c\/li\u003e\n\u003cli\u003eUnfinished edges for a rustic, workman's aesthetic\u003c\/li\u003e\n\u003cli\u003eTies in the back for a secure, adjustable fit\u003c\/li\u003e\n\u003cli\u003eClip closure at the neck for easy on and off\u003c\/li\u003e\n\u003cli\u003eNo pockets — clean, uncluttered design\u003c\/li\u003e\n\u003cli\u003eTougher than denim — suitable for welding, soldering, and metalsmithing environments\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eDurston\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003e6694\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStyle\u003c\/th\u003e\n\u003ctd\u003eFull Body Bib Apron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eCowhide leather\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEdge Finish\u003c\/th\u003e\n\u003ctd\u003eUnfinished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eClosure\u003c\/th\u003e\n\u003ctd\u003eBack ties with neck clip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePockets\u003c\/th\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43582120165590,"sku":"147.307","price":74.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-6694-full-body-leather-bib-apron-otto-frei-1.jpg?v=1726694719"},{"product_id":"durston-dapping-punch-set-21-piece-stand-3mm-36mm","title":"Durston Dapping Punch Set of 21 On Stand-Range 3mm-36mm (1\/8\" to 1-3\/8\")","description":"\u003cp\u003eThis medium-size dapping punch set from \u003cstrong\u003eDurston\u003c\/strong\u003e (W. Durston Ltd., Bucks, Great Britain) includes \u003cstrong\u003e21 hardened, highly polished steel punches\u003c\/strong\u003e ranging from \u003cstrong\u003e3.0mm to 36.0mm (1\/8\" to 1-3\/8\")\u003c\/strong\u003e, all mounted on a convenient plastic storage stand. Crafted from top-quality English steel, these punches are built for a lifetime of professional use in forming, doming, and shaping metal.\u003c\/p\u003e\u003cp\u003eThe set includes punches in the following sizes: 3.0mm, 4.0mm, 5.0mm, 6.0mm, 7.0mm, 8.0mm, 9.0mm, 10.0mm, 11.0mm, 12.0mm, 13.0mm, 14.0mm, 15.0mm, 17.0mm, 19.0mm, 21.0mm, 23.0mm, 25.0mm, 28.0mm, 32.0mm, and 36.0mm.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e21 dapping punches spanning 3.0mm – 36.0mm (1\/8\" – 1-3\/8\")\u003c\/li\u003e\n\u003cli\u003eMade from properly hardened, top-quality English steel\u003c\/li\u003e\n\u003cli\u003eHighly polished working surfaces for smooth, clean domes\u003c\/li\u003e\n\u003cli\u003eIncludes a plastic stand to keep punches organized and protected\u003c\/li\u003e\n\u003cli\u003eManufactured by W. Durston Ltd., Bucks, Great Britain\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePunch Count\u003c\/th\u003e\n\u003ctd\u003e21\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize Range\u003c\/th\u003e\n\u003ctd\u003e3.0mm – 36.0mm (1\/8\" – 1-3\/8\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eHardened, polished English steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStand Dimensions\u003c\/th\u003e\n\u003ctd\u003e8-1\/2\" long × 5-1\/2\" wide × 5-1\/2\" high (with punches mounted)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eGreat Britain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e21 dapping punches (3.0mm – 36.0mm)\u003c\/li\u003e\n\u003cli\u003ePlastic storage and display stand\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eNotes\u003c\/h3\u003e\u003cp\u003eThis listing includes the dapping punch set and stand only. Dapping dies are \u003cstrong\u003enot included\u003c\/strong\u003e and are available separately.\u003c\/p\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43582126162134,"sku":"125.051","price":210.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-dapping-punch-set-of-21-on-stand-range-3mm-36mm-18-to-1-38-otto-frei.jpg?v=1719957239"},{"product_id":"durston-1154-dapping-block-3-punches-42-47-50mm","title":"Durston 1154 Dapping Block with 3 Punches","description":"\u003cp\u003eThe Durston 1154 Dapping Block with 3 Punches delivers a focused, high-quality solution for doming and forming work. Manufactured by W. Durston Ltd. of Buckinghamshire, Great Britain, this set is crafted from properly hardened, highly polished English steel—built for a lifetime of professional use.\u003c\/p\u003e\u003cp\u003eThe flat dapping block features three precisely formed half-sphere depressions matched to three corresponding dapping punches, giving you a complete, coordinated forming system in a compact, straightforward tool. Whether you are shaping discs into domes or forming components for jewelry fabrication, this set provides the accuracy and surface finish that professional metalsmiths demand.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eManufactured by W. Durston Ltd., Buckinghamshire, Great Britain\u003c\/li\u003e\n\u003cli\u003eProperly hardened English steel construction for durability and longevity\u003c\/li\u003e\n\u003cli\u003eHighly polished surfaces on both block and punches for clean, mark-free forming\u003c\/li\u003e\n\u003cli\u003eFlat dapping block with 3 matched half-sphere depressions\u003c\/li\u003e\n\u003cli\u003eIncludes 3 dapping punches sized to correspond with the block depressions\u003c\/li\u003e\n\u003cli\u003eCoordinated punch-to-depression fit ensures accurate, consistent dome formation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eDurston 1154\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eHardened, polished English steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eW. Durston Ltd., Buckinghamshire, Great Britain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlock Type\u003c\/th\u003e\n\u003ctd\u003eFlat dapping block with 3 half-sphere depressions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHalf-Sphere Sizes\u003c\/th\u003e\n\u003ctd\u003e42 mm, 47 mm, 50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePunch Sizes\u003c\/th\u003e\n\u003ctd\u003e40 mm, 45 mm, 50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncluded Punches\u003c\/th\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 flat dapping block with three half-sphere depressions (42 mm, 47 mm, 50 mm)\u003c\/li\u003e\n\u003cli\u003e3 dapping punches (40 mm, 45 mm, 50 mm)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43582129209558,"sku":"125.004","price":172.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-dapping-block-with-3-punches-otto-frei.jpg?v=1719957239"},{"product_id":"durston-dapping-punch-set-24-piece-3mm-50mm-stand","title":"Durston Dapping Punch Set of 24 On Stand-Range 3mm-50mm (1\/8\" to 2\")","description":"\u003cp\u003e\u003cstrong\u003e24 Dapping Punches from 3.0mm–50.0mm (1\/8\"–2\") on a Plastic Stand\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis professional-grade dapping punch set from Durston features 24 punches spanning a wide range of sizes, all crafted from properly hardened and highly polished top-quality English steel by W. Durston Ltd. of Buckinghamshire, Great Britain. Designed for a lifetime of reliable use, these punches deliver the smooth, consistent domes that professional jewelers and metalsmiths demand.\u003c\/p\u003e\u003cp\u003eThe set arrives mounted on a convenient plastic stand that keeps all 24 punches organized and accessible at the bench. The stand measures 8-1\/2\" long by 5-1\/2\" wide and stands 5-1\/2\" high when the punches are mounted — a practical solution for maintaining order in a busy studio.\u003c\/p\u003e\u003cp\u003eThe 24 punches are sized as follows: 3.0mm, 4.0mm, 5.0mm, 6.0mm, 7.0mm, 8.0mm, 9.0mm, 10.0mm, 11.0mm, 12.0mm, 13.0mm, 14.0mm, 15.0mm, 17.0mm, 19.0mm, 21.0mm, 23.0mm, 25.0mm, 28.0mm, 32.0mm, 36.0mm, 40.0mm, 45.0mm, and 50.0mm.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSet of 24 dapping punches ranging from 3.0mm–50.0mm (1\/8\"–2\")\u003c\/li\u003e\n\u003cli\u003eCrafted from properly hardened, highly polished top-quality English steel\u003c\/li\u003e\n\u003cli\u003eProduced by W. Durston Ltd., Buckinghamshire, Great Britain\u003c\/li\u003e\n\u003cli\u003eIncludes a plastic stand for organized bench storage\u003c\/li\u003e\n\u003cli\u003eStand dimensions: 8-1\/2\" long × 5-1\/2\" wide × 5-1\/2\" high (with punches mounted)\u003c\/li\u003e\n\u003cli\u003eFull size progression for versatile doming and forming work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePunch Count\u003c\/th\u003e\n\u003ctd\u003e24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize Range\u003c\/th\u003e\n\u003ctd\u003e3.0mm–50.0mm (1\/8\"–2\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eHardened, polished English steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eW. Durston Ltd., Buckinghamshire, Great Britain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStand Material\u003c\/th\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStand Dimensions\u003c\/th\u003e\n\u003ctd\u003e8-1\/2\" L × 5-1\/2\" W × 5-1\/2\" H (with punches)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e24 dapping punches (3.0mm, 4.0mm, 5.0mm, 6.0mm, 7.0mm, 8.0mm, 9.0mm, 10.0mm, 11.0mm, 12.0mm, 13.0mm, 14.0mm, 15.0mm, 17.0mm, 19.0mm, 21.0mm, 23.0mm, 25.0mm, 28.0mm, 32.0mm, 36.0mm, 40.0mm, 45.0mm, 50.0mm)\u003c\/li\u003e\n\u003cli\u003ePlastic storage and display stand\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eNotes\u003c\/h3\u003e\u003cp\u003eThis listing is for the dapping punch set and stand only. Dapping dies are \u003cem\u003enot\u003c\/em\u003e included and are available separately.\u003c\/p\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43582129701078,"sku":"125.052","price":247.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-dapping-punch-set-of-24-on-stand-range-3mm-50mm-18-to-2-otto-frei.jpg?v=1719957239"},{"product_id":"durston-1121-master-forming-set-24-punch-3-50mm-125054","title":"Durston 1121 Master Forming Set","description":"\u003cp\u003eThe \u003cstrong\u003eDurston 1121 Master Forming Set\u003c\/strong\u003e (Part #125.054) brings six essential forming tools together in one organized steel stand. Ideal for dapping, bending, shaping, and pre-forming, this precision-made set covers round, domed, and general forming tasks for the metalsmith's bench. Made in England.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSix tools housed in one space-saving steel stand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24 matched dapping punches\u003c\/strong\u003e (3–50 mm) paired with a \u003cstrong\u003e70 mm square dapping block\u003c\/strong\u003e — each punch matches a corresponding cavity\u003c\/li\u003e\n\u003cli\u003eFlat dapping block with 23 depressions (Part #1155)\u003c\/li\u003e\n\u003cli\u003eFlat forming block with 14 half-spheres and 8 cutouts (Part #1156)\u003c\/li\u003e\n\u003cli\u003eForming and bending block (Part #125.161) — also available separately\u003c\/li\u003e\n\u003cli\u003e20-piece dapping cutter set, 3–22 mm (Part #1191)\u003c\/li\u003e\n\u003cli\u003eStand keeps all tools visible and within reach at the bench\u003c\/li\u003e\n\u003cli\u003ePrecision manufactured in England\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart No.\u003c\/th\u003e\n\u003ctd\u003e125.054\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSet No.\u003c\/th\u003e\n\u003ctd\u003e1121\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePunch Count\u003c\/th\u003e\n\u003ctd\u003e24 pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePunch Size Range\u003c\/th\u003e\n\u003ctd\u003e3–50 mm (approx. 1\/8\"–2\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDapping Block\u003c\/th\u003e\n\u003ctd\u003e70 mm square; each punch matches a corresponding cavity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStand Size (W × D × H)\u003c\/th\u003e\n\u003ctd\u003e14-1\/2\" × 12\" × 7\" (368 × 305 × 178 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCountry of Manufacture\u003c\/th\u003e\n\u003ctd\u003eEngland\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eItem\u003c\/th\u003e\n\u003cth\u003ePart No.\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e24 Dapping Punches (3–50 mm) + 70 mm Square Dapping Block\u003c\/td\u003e\n\u003ctd\u003e125.008\u003c\/td\u003e\n\u003ctd\u003eAlso sold as a standalone set (125.008); block available separately as 125.008BLK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlat Dapping Block with 23 Depressions\u003c\/td\u003e\n\u003ctd\u003e1155\u003c\/td\u003e\n\u003ctd\u003eNot sold separately; available with matching punches as 125.049\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlat Forming Block (14 half-spheres \u0026amp; 8 cutouts)\u003c\/td\u003e\n\u003ctd\u003e1156\u003c\/td\u003e\n\u003ctd\u003eNot sold separately; available with matching punches as 125.047\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eForming \u0026amp; Bending Block\u003c\/td\u003e\n\u003ctd\u003e125.161\u003c\/td\u003e\n\u003ctd\u003eAlso available separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDapping Cutter Set, 20 pieces (3–22 mm)\u003c\/td\u003e\n\u003ctd\u003e1191\u003c\/td\u003e\n\u003ctd\u003eIncluded in set\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSteel Organization Stand\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003eHolds all included tools\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e70 mm die block only: \u003ca href=\"\/products\/durston-large-65mm-2-1-2-die-block\"\u003e125.008BLK\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eFlat dapping block with matching punches: \u003ca href=\"\/products\/durston-21-punch-matched-dapping-punch-set-with-flat-die-3mm-to-36mm-punches\"\u003e125.049\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eFlat forming block with matching punches: \u003ca href=\"\/products\/durston-1104-dapping-punch-set-with-21-punches-3mm-36mm-on-stand-block\"\u003e125.047\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e24-punch dapping set sold separately: \u003ca href=\"\/products\/durston-large-24-punch-matched-dapping-punch-die-set\"\u003e125.008\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eForming and bending block sold separately: \u003ca href=\"\/products\/durston-forming-and-bending-block\"\u003e125.161\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse appropriate eye protection and maintain a tidy work area when dapping.\u003c\/li\u003e\n\u003cli\u003eStore punches clean and dry; keep the stand organized to protect working faces.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43582130487510,"sku":"125.054","price":945.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-master-forming-set-otto-frei-1.jpg?v=1719957239"},{"product_id":"durston-disc-cutter-set-3-32mm","title":"Durston Disc Cutter-Set of 10 Punches in Metric Calibrated Sizes Range: 3mm to 32mm","description":"\u003cp\u003eThis metric disc cutter set provides ten precision-ground round punches for clean, repeatable discs from small accents to larger blanks. Angled shear-style cutting edges help the punches bite smoothly into the metal so each strike feels efficient and controlled.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDisc cutter set with 10 round punches in metric-calibrated sizes for consistent, repeatable results.\u003c\/li\u003e\n\u003cli\u003eAngled shear-style cutting edges on each punch for more effective cutting action and cleaner edges.\u003c\/li\u003e\n\u003cli\u003eDesigned for use with rawhide or brass mallets, or in a hydraulic press for longest tool life.\u003c\/li\u003e\n\u003cli\u003eRecommended for non-ferrous jewelry metals commonly used at the bench.\u003c\/li\u003e\n\u003cli\u003eIncludes accessories to support accurate punching and basic maintenance of the cutting edges.\u003c\/li\u003e\n\u003cli\u003eDurable construction engineered specifically for professional jewelry and metalsmithing work.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePunch Count\u003c\/td\u003e\n\u003ctd\u003e10 round punches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePunch Size Range\u003c\/td\u003e\n\u003ctd\u003e3–32 mm (approx. 1\/8\"–1-1\/4\")*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIndividual Punch Sizes\u003c\/td\u003e\n\u003ctd\u003e3, 6, 9, 13, 16, 19, 22, 25, 28, 32 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended Maximum Thickness (hammer use)\u003c\/td\u003e\n\u003ctd\u003eUp to 18 gauge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended Maximum Thickness (hydraulic press)\u003c\/td\u003e\n\u003ctd\u003eUp to 8 gauge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended Hammers\u003c\/td\u003e\n\u003ctd\u003e1–2 lb brass mallets or rawhide mallets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting Edge Style\u003c\/td\u003e\n\u003ctd\u003eAngled shear-style cutting edges\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eDurston\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e*Inch sizes are approximate equivalents to the metric punch diameters.\u003c\/p\u003e\n\u003ch3\u003eAvailable Options\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eSet\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003eDisc cutter body with 10 punches (3–32 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eItem\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003cth\u003eQty\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisc cutter body\u003c\/td\u003e\n\u003ctd\u003eMetric disc cutter block for round punches\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRound punches\u003c\/td\u003e\n\u003ctd\u003e3–32 mm round punches (3, 6, 9, 13, 16, 19, 22, 25, 28, 32 mm)\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStamping pad\u003c\/td\u003e\n\u003ctd\u003eCustom pad to support the cutter during use\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShims\u003c\/td\u003e\n\u003ctd\u003eShims to support material and maintain alignment\u003c\/td\u003e\n\u003ctd\u003eSet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting lubricant\u003c\/td\u003e\n\u003ctd\u003eLubricant for punch cutting edges\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHex key\u003c\/td\u003e\n\u003ctd\u003eHex key for adjustments and maintenance\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMetals\u003c\/td\u003e\n\u003ctd\u003eNon-ferrous jewelry metals: copper, silver, gold, brass, nickel silver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot Intended For\u003c\/td\u003e\n\u003ctd\u003eFerrous steels or hardened alloys\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended Base\u003c\/td\u003e\n\u003ctd\u003eRubber or urethane pad (such as 95 durometer urethane) under the cutter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eFor best performance, place the disc cutter on a rubber or urethane pad, lubricate the punch edges lightly, and strike with a suitable brass or rawhide mallet rather than a nail-driving hammer. Always support the opposite side of the cutter with a similar sheet of metal to help keep the upper and lower plates aligned and to reduce sticking.\u003c\/p\u003e\n\u003cp\u003eDo not exceed the recommended metal thickness, and store the cutter lightly lubricated in a dry location to help prevent rust and extend tool life.\u003c\/p\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43582131994838,"sku":"125.1769","price":348.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-disc-cutter-set-of-10-punches-in-metric-calibrated-sizes-range-3mm-to-32mm-otto-frei.jpg?v=1719957237"},{"product_id":"durston-drm-130-double-sided-powered-rolling-mill-110v","title":"Durston 1090 TUI 130 Double Sided Power Rolling Mill-130mm Flat \u0026 130mm Wire 110V","description":"\u003cp\u003eThe Durston DRM-130 is a double-sided powered rolling mill built for serious production work. One side features a full \u003cstrong\u003e130 mm flat roll\u003c\/strong\u003e for sheet reduction; the other carries a dedicated \u003cstrong\u003e130 mm wire roll\u003c\/strong\u003e with 19 square groove sizes ranging from 1 mm to 10 mm. The cast iron base and gearbox cover provide the strength and rigidity needed for demanding studio and production environments, while high-quality Swedish roll steel — heat-treated to \u003cstrong\u003eRC 63\/64\u003c\/strong\u003e — runs in heavy-duty roller bearings for long-lasting precision.\u003c\/p\u003e\n\u003cp\u003ePower comes from a \u003cstrong\u003e1.5 hp (1.1 kW) 110 V motor\u003c\/strong\u003e paired with a precision epicyclic variable-speed gearbox, delivering smooth, near-silent operation across a \u003cstrong\u003e5–30 rpm\u003c\/strong\u003e speed range in both forward and reverse. Side extension rollers add quick half-round profiling capability without a tool change.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFull \u003cstrong\u003e130 mm flat roll\u003c\/strong\u003e on one side; dedicated \u003cstrong\u003e130 mm wire roll\u003c\/strong\u003e on the other\u003c\/li\u003e\n  \u003cli\u003e19 square wire groove sizes from 1 mm to 10 mm\u003c\/li\u003e\n  \u003cli\u003eSide extension rollers: right side 4, 3, 2, 1.5 mm \"D\" grooves; left side 8, 6, 3.5 mm \"D\" grooves\u003c\/li\u003e\n  \u003cli\u003eMaximum sheet operating thickness: \u003cstrong\u003e6 mm\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003eMaximum wire capacity: \u003cstrong\u003e10 mm\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003eSwedish roll steel heat-treated to RC 63\/64\u003c\/li\u003e\n  \u003cli\u003eCast iron frame and gearbox cover for strength and rigidity\u003c\/li\u003e\n  \u003cli\u003ePrecision epicyclic variable-speed gearbox — smooth, near-silent power\u003c\/li\u003e\n  \u003cli\u003eForward\/reverse operation with simple speed up\/down controls\u003c\/li\u003e\n  \u003cli\u003eVariable speed: 5–30 rpm (forward and reverse)\u003c\/li\u003e\n  \u003cli\u003eEmergency stop button, front and rear safety bars, guarded extension rollers\u003c\/li\u003e\n  \u003cli\u003eEasy-to-read calibrated disc for exact roll-gap measurement\u003c\/li\u003e\n  \u003cli\u003e110 V US version; 1-year factory warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMotor\u003c\/th\u003e\n\u003ctd\u003e1.5 hp (1.1 kW), 110 V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSpeed Range\u003c\/th\u003e\n\u003ctd\u003e5–30 rpm (forward and reverse)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRoller Length\u003c\/th\u003e\n\u003ctd\u003e130 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRoller Diameter\u003c\/th\u003e\n\u003ctd\u003e65 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRoller Configuration\u003c\/th\u003e\n\u003ctd\u003e130 mm flat + 130 mm wire (double-sided)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRoll Steel Hardness\u003c\/th\u003e\n\u003ctd\u003eRC 63\/64 (Swedish heat-treated steel)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMax Sheet Thickness\u003c\/th\u003e\n\u003ctd\u003e6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMax Wire Capacity\u003c\/th\u003e\n\u003ctd\u003e10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eWire Grooves\u003c\/th\u003e\n\u003ctd\u003e19 square groove sizes, 1 mm – 10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSide Extension Grooves\u003c\/th\u003e\n\u003ctd\u003eRight: 4, 3, 2, 1.5 mm \"D\"; Left: 8, 6, 3.5 mm \"D\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e32-5\/8\" × 15-3\/8\" × 21-1\/4\" H (830 × 390 × 540 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNet Weight\u003c\/th\u003e\n\u003ctd\u003e396 lb (180 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e110 V (US)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e1 year (factory)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eFor inside financing on Durston power mills, contact Wyatt Frei at 800-772-3456 x107 or \u003ca href=\"mailto:wyatt@ottofrei.com\"\u003ewyatt@ottofrei.com\u003c\/a\u003e.\u003c\/p\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43582133600470,"sku":"128.142","price":5374.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-1090-tui-130-double-sided-power-rolling-mill-130mm-flat-and-130mm-wire-110v-otto-frei-1.jpg?v=1719957231"},{"product_id":"durston-tui-c130-combination-power-rolling-mill-110v","title":"Durston 1087 Power TUI C130 Single Sided 130mm Combo Flat \u0026 Wire Rolling Mill 110V","description":"\u003cp\u003eThe Durston TUI C130 Power Rolling Mill delivers Durston's proven rolling performance at a lower cost by using a \u003cstrong\u003esteel base\u003c\/strong\u003e and \u003cstrong\u003eperforated aluminum gearbox cover\u003c\/strong\u003e in place of the DRM line's cast iron base and cover. \u003cstrong\u003eAll other core components are identical to the DRM series\u003c\/strong\u003e — motor, gearbox, and one-piece cast iron mill frame with high-quality steel rolls seated in heavy-duty roller bearings — making the TUI an excellent choice for busy production shops and school environments alike.\u003c\/p\u003e\n\n\u003cp\u003eThis \u003cstrong\u003esingle-sided combination mill\u003c\/strong\u003e handles both flat sheet rolling and wire rolling in one unit, with side extension rolls for half-round profiles. Forward\/reverse variable speed control, an emergency stop button, and front and rear safety bars provide confident, controlled operation.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-sided combination design\u003c\/strong\u003e — 130 mm flat rolling surface plus wire grooves on the same roll set\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide extension rolls\u003c\/strong\u003e with protective guards for half-round profiles in 4, 3, 2, and 1.5 mm sizes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForward and reverse variable speed control\u003c\/strong\u003e for precise material handling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEmergency stop button\u003c\/strong\u003e plus front and rear safety bars for operator protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMetric and inch adjustable flywheels\u003c\/strong\u003e for accurate gap setting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteel base and aluminum gearbox cover\u003c\/strong\u003e reduce cost while retaining full DRM-grade rolling components\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.1 kW (1.5 HP) motor\u003c\/strong\u003e and shared DRM gearbox deliver consistent, repeatable results\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor\u003c\/td\u003e\n\u003ctd\u003e1.1 kW (1.5 HP), 110 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRoller Type\u003c\/td\u003e\n\u003ctd\u003eCombination (flat + wire)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRoller Length\u003c\/td\u003e\n\u003ctd\u003e130 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRoller Diameter\u003c\/td\u003e\n\u003ctd\u003e65 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSheet Thickness Capacity\u003c\/td\u003e\n\u003ctd\u003e6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWire Grooves\u003c\/td\u003e\n\u003ctd\u003e11 square sizes, 8 mm – 1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Wire Capacity\u003c\/td\u003e\n\u003ctd\u003e8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSide Extension Rolls\u003c\/td\u003e\n\u003ctd\u003eHalf-round: 4, 3, 2, 1.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall Dimensions\u003c\/td\u003e\n\u003ctd\u003e32-3\/4\" L × 15-3\/8\" W × 21-1\/4\" H (830 × 390 × 540 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet Weight\u003c\/td\u003e\n\u003ctd\u003e243 lb (110 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBase Material\u003c\/td\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGearbox Cover\u003c\/td\u003e\n\u003ctd\u003ePerforated aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMill Frame\u003c\/td\u003e\n\u003ctd\u003eOne-piece cast iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e110 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e1087\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eFor inside financing on Durston power mills, contact Wyatt Frei at 800-772-3456 x107 or \u003ca href=\"mailto:wyatt@ottofrei.com\"\u003ewyatt@ottofrei.com\u003c\/a\u003e.\u003c\/p\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43582133895382,"sku":"128.141","price":3945.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-1087-power-tui-c130-single-sided-130mm-combo-flat-and-wire-rolling-mill-110v-otto-frei-1.jpg?v=1689354685"},{"product_id":"durston-wire-ingot-mold-1614-steel-6-groove","title":"Durston Smooth Surface Wire Ingot Mold","description":"\u003cp\u003eThe Durston Smooth Surface Wire Ingot Mold — also referred to as a strip ingot mold — is machined from a solid block of steel, producing ingots with far smoother surfaces than those made with economy-grade wire ingot molds. The precision machining results in cleaner castings that require less cleanup before rolling or further fabrication. Use this mold to cast ingots in a variety of sizes suitable for making stock, rolling into wire shapes with a rolling mill, or traditional metalsmithing fabrication. Overall length of this strip ingot mold is 15\", including the handle. Grooves are present on both sides of the mold. Durston model 1614.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMachined from a solid block of steel for superior surface finish on cast ingots\u003c\/li\u003e\n\u003cli\u003eProduces smoother ingots compared to economy-line wire ingot molds\u003c\/li\u003e\n\u003cli\u003eSix grooves in a range of lengths, widths, and depths for versatile ingot sizes\u003c\/li\u003e\n\u003cli\u003eGrooves located on both sides of the mold for maximum utility\u003c\/li\u003e\n\u003cli\u003eSuitable for casting stock to be rolled into wire or sheet with a rolling mill\u003c\/li\u003e\n\u003cli\u003e15\" overall length including handle\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eDurston 1614\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall Length\u003c\/th\u003e\n\u003ctd\u003e15\" (including handle)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGroove Locations\u003c\/th\u003e\n\u003ctd\u003eBoth sides of mold\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNumber of Grooves\u003c\/th\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGroove 1\u003c\/th\u003e\n\u003ctd\u003e100mm L x 10mm W x 5mm D (4\" x 3\/8\" x 3\/16\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGroove 2\u003c\/th\u003e\n\u003ctd\u003e137mm L x 4mm W x 6mm D (5-3\/8\" x 5\/32\" x 1\/4\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGroove 3\u003c\/th\u003e\n\u003ctd\u003e137mm L x 6mm W x 6mm D (5-3\/8\" x 1\/4\" x 1\/4\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGroove 4\u003c\/th\u003e\n\u003ctd\u003e100mm L x 18mm W x 10mm D (4\" x 3\/4\" x 3\/8\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGroove 5\u003c\/th\u003e\n\u003ctd\u003e137mm L x 5mm W x 6mm D (5-3\/8\" x 3\/16\" x 1\/4\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGroove 6\u003c\/th\u003e\n\u003ctd\u003e137mm L x 8mm W x 6mm D (5-3\/8\" x 5\/16\" x 1\/4\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSteel will naturally rust.\u003c\/strong\u003e To prevent rust, keep your ingot mold covered in a light coating of machine oil when not in use. If rust does develop, remove it with an abrasive and reapply oil. The presence of rust does not diminish the functional use of this tool.\u003c\/p\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43582142218454,"sku":"122.869","price":108.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-smooth-surface-wire-ingot-mold-otto-frei.jpg?v=1719957225"},{"product_id":"durston-forming-bending-block-tool-steel-15-groove","title":"Durston Forming and Bending Block","description":"\u003cp\u003eThe Durston Forming and Bending Block is a versatile bench tool machined from a solid block of tool steel, designed for forming and shaping metal including ring shanks, tubing, identification nameplates, and many other items. With an extensive range of half-round grooves across both faces plus a V-groove and round depressions, this block handles a wide variety of bending and forming tasks in a single compact tool.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMachined from solid tool steel for durability and precision\u003c\/li\u003e\n\u003cli\u003eOne side features 5 large half-round grooves; the opposite side features 10 half-round grooves and one 90° V-groove\u003c\/li\u003e\n\u003cli\u003eHalf-round grooves span 15 diameter sizes: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 12, 16, 19, 22, and 25 mm\u003c\/li\u003e\n\u003cli\u003eOne side is drilled with 10 round depressions ranging from 1 mm to 10 mm\u003c\/li\u003e\n\u003cli\u003eSuitable for shaping ring shanks, tubing, nameplates, and more\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSolid tool steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e5-1\/8\" × 2-1\/2\" × 1-1\/8\" (130 mm × 65 mm × 28 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHalf-Round Groove Diameters\u003c\/th\u003e\n\u003ctd\u003e1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 12, 16, 19, 22, 25 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRound Depressions\u003c\/th\u003e\n\u003ctd\u003e10 depressions, 1 mm – 10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eV-Groove\u003c\/th\u003e\n\u003ctd\u003eOne 90° V-groove\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eDurston\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eNotes\u003c\/h3\u003e\u003cp\u003eAlso sold with 10 matching round rods on a stand — see part number 125.162.\u003c\/p\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43582145855702,"sku":"125.161","price":180.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-forming-and-bending-block-otto-frei.jpg?v=1719957221"},{"product_id":"durston-ring-size-system-49-finger-gauges-ring-stick-usa-sizes-3-12","title":"Durston Ring Size System Set of 49 Finger Gauges \u0026 Matching Ring Stick USA Sizes 3-12","description":"\u003cp\u003eDurston's matched set of 49 individual ring finger gauges and ring stick is machined to the highest standards so you can confidently record customer finger size and reduce sizing errors. Use with the Durston precision steel ring mandrel, and you will never have sizing errors between the front counter and the rear shop again.\u003c\/p\u003e\u003cp\u003eThe 49 individual ring finger gauges are comfort fit shaped and cover the range from USA sizes 3 to 12 in 1\/4 and 1\/2 size increments. The steel ring finger gauges come calibrated to the ring stick, feature rounded inside surfaces, and are all 5mm wide by 2mm thick. The matching brushed aluminum ring stick is calibrated in quarter sizes from 1–15. The Durston Ring Size System comes packed in a slotted padded faux leather case that makes for a very professional impression.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e49 individual comfort fit–shaped ring finger gauges cover USA sizes 3–12\u003c\/li\u003e\n\u003cli\u003eAvailable in 1\/4 and 1\/2 size increments for precise finger measurement\u003c\/li\u003e\n\u003cli\u003eSteel gauges feature rounded inside surfaces for comfortable fitting\u003c\/li\u003e\n\u003cli\u003eAll gauges are 5mm wide by 2mm thick — consistent and uniform\u003c\/li\u003e\n\u003cli\u003eGauges are pre-calibrated to match the included ring stick\u003c\/li\u003e\n\u003cli\u003eMatching brushed aluminum ring stick calibrated in quarter sizes from 1–15\u003c\/li\u003e\n\u003cli\u003eEliminates sizing discrepancies between the sales counter and the workshop\u003c\/li\u003e\n\u003cli\u003ePresented in a slotted padded faux leather case for a professional appearance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSet Contents\u003c\/th\u003e\n\u003ctd\u003e49 ring finger gauges and 1 matching ring stick\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize Range (Gauges)\u003c\/th\u003e\n\u003ctd\u003eUSA sizes 3–12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize Increments\u003c\/th\u003e\n\u003ctd\u003e1\/4 and 1\/2 size steps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGauge Width\u003c\/th\u003e\n\u003ctd\u003e5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGauge Thickness\u003c\/th\u003e\n\u003ctd\u003e2mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGauge Shape\u003c\/th\u003e\n\u003ctd\u003eComfort fit (rounded inside surface)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGauge Material\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRing Stick Material\u003c\/th\u003e\n\u003ctd\u003eBrushed aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRing Stick Calibration\u003c\/th\u003e\n\u003ctd\u003eQuarter sizes, 1–15 (USA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCalibration\u003c\/th\u003e\n\u003ctd\u003eGauges calibrated to matching ring stick\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCase\u003c\/th\u003e\n\u003ctd\u003eSlotted padded faux leather case\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eNotes\u003c\/h3\u003e\u003cp\u003eFor best results, use this system in conjunction with the Durston precision steel ring mandrel to ensure consistent sizing accuracy from the sales floor to the bench.\u003c\/p\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43582148575446,"sku":"135.230","price":193.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-ring-size-system-set-of-49-finger-gauges-and-matching-ring-stick-usa-sizes-3-12-otto-frei-1.jpg?v=1719957221"},{"product_id":"durston-precisionfit-steel-ring-mandrel-us-sizes-1-16-quarter-size-no-groove","title":"Durston PrecisionFit Steel Ring Mandrel Graduated in USA sizes 1 To 16 by 1\/4 Size-No Groove","description":"\u003cp\u003eThe Durston PrecisionFit Steel Ring Mandrel is a super premium, properly hardened and expertly machined steel mandrel matched to the Durston Ring Size System and the Durston Ring Finger Gauge. Designed to work in concert with the full Durston sizing system, this mandrel helps jewelers minimize customer ring size issues at the bench—whether you are using a Durston finger gauge or another brand. With over 20,000 units in use at some of the largest jewelry operations in the United States, it is the mandrel of choice for professional jewelers who demand precision and consistency.\u003c\/p\u003e\u003cp\u003eGraduated in US sizes 1 through 16 by 1\/4-size increments, this no-groove mandrel delivers clear, accurate sizing markings across the full range. Made in the United Kingdom to exacting tolerances, it replaces part number 143.076.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMatched to the Durston Ring Size System and Durston Ring Finger Gauge for consistent, precise sizing\u003c\/li\u003e\n\u003cli\u003eProperly hardened and expertly machined steel construction\u003c\/li\u003e\n\u003cli\u003eGraduated in US sizes 1–16 in 1\/4-size increments\u003c\/li\u003e\n\u003cli\u003eNo groove design for a clean, unobstructed working surface\u003c\/li\u003e\n\u003cli\u003eTrusted by some of the largest jewelry operations in the United States—over 20,000 units in use\u003c\/li\u003e\n\u003cli\u003eMade in the United Kingdom\u003c\/li\u003e\n\u003cli\u003eReplaces part number 143.076\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSize Range\u003c\/th\u003e\n\u003ctd\u003eUS sizes 1–16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGraduation\u003c\/th\u003e\n\u003ctd\u003e1\/4 size increments\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGroove\u003c\/th\u003e\n\u003ctd\u003eNo groove\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel (hardened)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eUnited Kingdom\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReplaces\u003c\/th\u003e\n\u003ctd\u003e143.076\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43582152048854,"sku":"143.088","price":47.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-precisionfit-steel-ring-mandrel-graduated-in-usa-sizes-1-to-16-by-14-size-no-groove-otto-frei.jpg?v=1719957219"},{"product_id":"durston-c80-economy-combination-rolling-mill-80mm-direct-drive","title":"Durston 1000 C80 Economy Combination Rolling Mill","description":"\u003cp\u003eThe Durston 1000 C80 Economy Combination Rolling Mill is an 80 mm direct drive mini rolling mill designed for jewelers and metalsmiths who need to produce small quantities of flat sheet and wire product. Without a reduction gear, this mill delivers straightforward, compact operation — and because of its size and intended workload, none is necessary.\u003c\/p\u003e\u003cp\u003eThis economy version of the renowned Durston mini mill features combination rollers, offering both flat rolling and wire groove capabilities in a single compact unit. Nine wire groove sizes ranging from 1 mm to 6.5 mm give the bench jeweler meaningful versatility without the footprint of a full-size mill. The flat rollers accommodate sheet up to 5 mm thick, making this a capable everyday workhorse for smaller studios and production environments with moderate output demands.\u003c\/p\u003e\u003cp\u003eNote that this economy model does not include extension rolls.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDirect drive gearbox — simple, efficient operation without reduction gear\u003c\/li\u003e\n\u003cli\u003eCombination roller design handles both flat sheet and wire in one mill\u003c\/li\u003e\n\u003cli\u003eNine wire groove sizes ranging from 1 mm to 6.5 mm\u003c\/li\u003e\n\u003cli\u003eSheet rolling capacity up to 5 mm thickness\u003c\/li\u003e\n\u003cli\u003eCompact footprint suitable for smaller bench setups\u003c\/li\u003e\n\u003cli\u003eEconomy version of the classic Durston mini mill\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eRoll Size\u003c\/th\u003e\n\u003ctd\u003e80 mm × 45 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoller Type\u003c\/th\u003e\n\u003ctd\u003eCombination\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoller Length\u003c\/th\u003e\n\u003ctd\u003e80 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoller Diameter\u003c\/th\u003e\n\u003ctd\u003e45 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheet Thickness Capacity\u003c\/th\u003e\n\u003ctd\u003e5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWire Grooves\u003c\/th\u003e\n\u003ctd\u003e9 sizes, 1 mm – 6.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Wire Capacity\u003c\/th\u003e\n\u003ctd\u003e6.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGear Ratio\u003c\/th\u003e\n\u003ctd\u003eDirect drive gearbox\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e10\" L × 6-3\/4\" W × 10-1\/2\" H (255 mm × 170 mm × 265 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNet Weight\u003c\/th\u003e\n\u003ctd\u003e33 lbs. (15.1 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eNotes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExtension rolls are not included with this economy model.\u003c\/li\u003e\n\u003cli\u003eDirect drive design — no reduction gear is included or required for this mill's intended use.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43582273028310,"sku":"128.104","price":746.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-1000-c80-economy-combination-rolling-mill-otto-frei.jpg?v=1719957136"},{"product_id":"durston-d4-158mm-stacked-rolling-mill","title":"Durston 1052 Double D4 158mm Stacked Rolling Mill","description":"\u003cp\u003eThe Durston D4 158 mm Stacked Rolling Mill is a precision-engineered powerhouse for professional metalsmiths and jewelers who need extra width and power for heavy-duty rolling. Going beyond the D2 model, the D4 158 mm adds lower side rolls, a thicker output roll assembly, and a triple-stage gear reduction system — delivering both power and speed through dual turning levers for effortless rolling of large sheet and wire.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWide 158 mm (6-3\/16\") rollers for pattern rolling standard 6\" sheet metal\u003c\/li\u003e\n\u003cli\u003eTriple gear reduction with two handles for precision or speed control\u003c\/li\u003e\n\u003cli\u003eCombination rolls with 19 square wire grooves (10 mm – 1 mm)\u003c\/li\u003e\n\u003cli\u003eThree half-round grooves: 7 mm, 6 mm, and 5 mm\u003c\/li\u003e\n\u003cli\u003eSide extension rolls ranging 8 mm – 1.5 mm\u003c\/li\u003e\n\u003cli\u003eMaximum sheet capacity: 6 mm thick\u003c\/li\u003e\n\u003cli\u003eMaximum wire capacity: 10 mm\u003c\/li\u003e\n\u003cli\u003eDurable cast iron frame with precision-ground rolls\u003c\/li\u003e\n\u003cli\u003eDual handles provide both high-speed rolling and precision control\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eDurston 1052 Double D4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoll Size\u003c\/th\u003e\n\u003ctd\u003e158 mm × 60 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoller Type\u003c\/th\u003e\n\u003ctd\u003eCombination\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheet Thickness Capacity\u003c\/th\u003e\n\u003ctd\u003e6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Wire Capacity\u003c\/th\u003e\n\u003ctd\u003e10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWire Grooves\u003c\/th\u003e\n\u003ctd\u003e19 square grooves, 10 mm – 1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHalf-Round Groove Sizes\u003c\/th\u003e\n\u003ctd\u003e7 mm, 6 mm, 5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSide Extension Sizes\u003c\/th\u003e\n\u003ctd\u003e8 mm, 6 mm, 4 mm, 3 mm, 2 mm, 1.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGear Ratios\u003c\/th\u003e\n\u003ctd\u003e2.5 : 1 | 5 : 1 | 11 : 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall Dimensions\u003c\/th\u003e\n\u003ctd\u003e16-1\/2\" L × 8-3\/4\" W × 23-1\/2\" H (420 × 220 × 600 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNet Weight\u003c\/th\u003e\n\u003ctd\u003e187 lbs (85 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eSuitable for non-ferrous metals including gold, silver, copper, and brass. Ideal for goldsmiths, silversmiths, and metal artists requiring broad, consistent sheet rolling or rapid rod and bar reduction. Built by Durston, trusted worldwide for quality and longevity.\u003c\/p\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43582273552598,"sku":"128.112","price":4260.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-1052-double-d4-158mm-stacked-rolling-mill-otto-frei.jpg?v=1689354826"},{"product_id":"durston-jump-ringer-230v-foredom-flex-shaft-combo","title":"Durston Complete Jump Ring Maker and 230V Foredom Flex Shaft Combo","description":"\u003cp\u003e\u003cstrong\u003e230V export jump ring making combo for 220–240 V regions\u003c\/strong\u003e, pairing the Durston Complete Jump Ringer with a Foredom 230V reversible flex shaft kit. Once set up, you can wind coils and cut smooth, consistent jump rings while the motor runs at a controlled, low hum at your bench.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e230V export setup combines a Durston Complete Jump Ringer with a Foredom 1\/6 HP reversible flex shaft\u003c\/li\u003e\n\u003cli\u003eM.SR-2 230V motor delivers up to 18,000 RPM with plenty of power for winding and cutting coils without stalling under normal load\u003c\/li\u003e\n\u003cli\u003eReversible motor rotation helps manage chip direction and extend tool life when cutting jump rings\u003c\/li\u003e\n\u003cli\u003eDurston Complete Jump Ringer produces jump rings from soft non-ferrous wire (gold, copper, silver) up to approx. 13 ga (1.85 mm)\u003c\/li\u003e\n\u003cli\u003eMandrels cover a wide inside diameter range from 2 mm to 12 mm in 0.5 mm steps for chain and jewelry design flexibility\u003c\/li\u003e\n\u003cli\u003eCoil holder integrated into the main base and a movable safety coil winder improve stability and ergonomics at the bench\u003c\/li\u003e\n\u003cli\u003eH.30 handpiece with geared 3-jaw chuck securely grips the included saw blade mandrel and other rotary accessories\u003c\/li\u003e\n\u003cli\u003eC.FCH-2 230V foot control in plastic housing provides smooth variable speed control for precise cutting and drilling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKit Type\u003c\/td\u003e\n\u003ctd\u003eDurston jump ring maker with Foredom 230V flex shaft combo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor Model\u003c\/td\u003e\n\u003ctd\u003eForedom M.SR-2 230V reversible flex shaft motor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor Power\u003c\/td\u003e\n\u003ctd\u003e1\/6 HP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Motor Speed\u003c\/td\u003e\n\u003ctd\u003eUp to 18,000 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor Rotation\u003c\/td\u003e\n\u003ctd\u003eForward and reverse\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e230 V AC export version for regions with 220–240 V mains supply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHandpiece\u003c\/td\u003e\n\u003ctd\u003eH.30 handpiece with geared 3-jaw #0 chuck\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJump Ringer Wire Capacity\u003c\/td\u003e\n\u003ctd\u003eSoft non-ferrous wire up to approx. 13 ga (1.85 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJump Ring Inside Diameter Range\u003c\/td\u003e\n\u003ctd\u003eApprox. 2–12 mm in 0.5 mm increments (Durston mandrels)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSaw Blade\u003c\/td\u003e\n\u003ctd\u003eHigh speed steel, approx. 1-1\/4\" (31.75 mm) diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMandrel Length (Durston)\u003c\/td\u003e\n\u003ctd\u003eApprox. 4-3\/4\" (121 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eDurston \/ Foredom\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eItem\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e143.209\u003c\/td\u003e\n\u003ctd\u003eDurston Complete Jump Ringer\u003c\/td\u003e\n\u003ctd\u003eJump ring making machine with base, high stem, integrated coil holder, safety coil winder, handpiece holder, saw blade system, and 21 mandrels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003ctd\u003eDurston mandrel set\u003c\/td\u003e\n\u003ctd\u003e21 mandrels from 2 mm to 12 mm (0.5 mm steps); smallest four (2.0, 2.5, 3.0, 4.0 mm) undrilled, remaining mandrels drilled with holes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003ctd\u003eDurston accessories\u003c\/td\u003e\n\u003ctd\u003e2-sided coil holder, key-less coil winder, saw blade mandrel, approx. 1-1\/4\" HSS saw blade, handpiece holder, 3 hex keys\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e134.186-230V\u003c\/td\u003e\n\u003ctd\u003eForedom 230V flex shaft kit\u003c\/td\u003e\n\u003ctd\u003eM.SR-2 230V reversible motor with standard shaft \u0026amp; sheath, C.FCH-2 230V foot control in plastic housing, H.30 handpiece, chuck key, tube of flex shaft grease\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e134.090\u003c\/td\u003e\n\u003ctd\u003eAK90 accessory kit\u003c\/td\u003e\n\u003ctd\u003e13-piece assortment of Tungsten Vanadium ball burs and twist drills on 3\/32\" (2.35 mm) shanks with plastic bur holder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKit is intended for 230 V AC systems in regions where 220–240 V is standard (not for 100–127 V mains).\u003c\/li\u003e\n\u003cli\u003eM.SR-2 motor must be used with a Foredom speed control; do not plug the motor directly into a wall outlet.\u003c\/li\u003e\n\u003cli\u003eDurston jump ringer is designed for use with a No. 30 style handpiece (included H.30) and suitable flex shaft.\u003c\/li\u003e\n\u003cli\u003eUse soft, non-ferrous jewelry wire (such as gold, silver, copper) within the stated gauge and mandrel ranges.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e230V export kit:\u003c\/strong\u003e motor is rated for 230 V AC in regions with 220–240 V mains. Supplied with a North American 3-prong 230 V plug; Australian orders ship with an Australian 3-prong plug. Use a plug adapter that matches your local outlet. Do not use on 100–127 V circuits.\u003c\/li\u003e\n\u003cli\u003eAlways secure coils in the coil holder and use the safety coil winder as directed before cutting with the saw blade.\u003c\/li\u003e\n\u003cli\u003eTake light passes and let the blade do the work to minimize burrs and extend blade life.\u003c\/li\u003e\n\u003cli\u003ePeriodically inspect the shaft, sheath, and handpiece for wear and keep the flex shaft lightly greased according to Foredom’s maintenance instructions.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43582823268566,"sku":"143.101X-2230","price":648.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-complete-jump-ring-maker-and-230v-foredom-flex-shaft-combo-otto-frei.jpg?v=1719956841"},{"product_id":"durston-superior-jewelers-workbench-3rd-gen","title":"Ships Free-Durston Superior Large Jewellers Workbench-Ships Free","description":"\u003cp\u003eThis superior jeweler's workbench is built for demanding professional use, combining a thick butcher block work surface, ergonomic catch tray, and a storage-rich layout that keeps tools and fixtures close at hand. A centrally located steel mounting plate accepts modern workholding systems so the bench feels like a dedicated cockpit for intensive stone setting and fabrication work.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuperior jeweler's bench with refined fit and finish for reliable daily use in professional shops and studios.\u003c\/li\u003e\n\u003cli\u003eButcher block worktop with a high surrounding rail helps keep tools and small parts contained on the bench surface.\u003c\/li\u003e\n\u003cli\u003eSolid hardwood frame and legs provide a stable platform for hammering, setting, and forming operations.\u003c\/li\u003e\n\u003cli\u003eErgonomic wrap-around catch tray brings filings and workpieces closer for easier access while you work seated at the bench.\u003c\/li\u003e\n\u003cli\u003ePull-out soldering station with vermiculite solder board positions soldering work just below the main bench surface.\u003c\/li\u003e\n\u003cli\u003eSteel-lined catch tray with a sliding wood cover helps safeguard and recover precious metal scrap.\u003c\/li\u003e\n\u003cli\u003eIntegrated drawers, including a dedicated tool drawer under the bench pin, keep tools and accessories organized within reach.\u003c\/li\u003e\n\u003cli\u003eCentrally located GRS-ready steel anvil\/mounting plate compatible with the GRS dovetail system for modern workholding setups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBench Width\u003c\/td\u003e\n\u003ctd\u003e49\" (1245 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBench Depth\u003c\/td\u003e\n\u003ctd\u003e26\" (660 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall Height\u003c\/td\u003e\n\u003ctd\u003e37-3\/4\" (960 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorktop Thickness\u003c\/td\u003e\n\u003ctd\u003e1-1\/2\" (38 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFloor to Catch Tray Height\u003c\/td\u003e\n\u003ctd\u003e24-1\/4\" (617 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBench Weight\u003c\/td\u003e\n\u003ctd\u003e200 lb (91 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorktop Construction\u003c\/td\u003e\n\u003ctd\u003eButcher block top with high surrounding railing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrame Construction\u003c\/td\u003e\n\u003ctd\u003eSolid wood frame with approximately 2\" x 2\" (51 mm x 51 mm) hardwood legs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrawer Construction\u003c\/td\u003e\n\u003ctd\u003eHardwood drawer faces with high-density fiberboard slides and bottoms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrawer \u0026amp; Storage Layout\u003c\/td\u003e\n\u003ctd\u003eRight-hand bank of 6 drawers (top two shallower, bottom four deeper); central top drawer; single tool drawer under bench pin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Carton Size\u003c\/td\u003e\n\u003ctd\u003e52\" x 30\" x 26\" (1321 mm x 762 mm x 660 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Weight (with carton)\u003c\/td\u003e\n\u003ctd\u003e220 lb (100 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Method\u003c\/td\u003e\n\u003ctd\u003eTruck freight; packed in oversized carton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eDurston\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eThis third-generation design adds improved fit and finish and an ergonomic wrap-around catch tray to support long sessions at the bench. Assembly can be completed in as little as 15 minutes using the included instructions (with an assembly video available on the product page).\u003c\/p\u003e\n\u003cp\u003eThe centrally located steel anvil\/mounting plate is GRS-ready and compatible with the GRS dovetail mounting system; bench pin and GRS accessories are sold separately. Benches are professionally packed for freight shipment to minimize the risk of damage in transit.\u003c\/p\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43582849450198,"sku":"113.044LG","price":1895.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/ships-free-durston-superior-large-jewellers-workbench-ships-free-otto-frei-1.jpg?v=1689355285"},{"product_id":"durston-jewelers-workbench","title":"Ships Free-Durston Jeweler's Workbench","description":"\u003cp\u003eThis jeweler's workbench provides a solid, dependable workspace in a compact footprint, with a cut-back top and organized storage tailored for everyday bench work. Since its U.S. introduction in 2017, it has become a best-seller in its class, giving bench jewelers an economical, work-ready setup that feels stable and reassuring under your hands.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClassic American-style bench layout with cut-back benchtop for comfortable reach to tools and projects.\u003c\/li\u003e\n\u003cli\u003eSliding tool tray and metal-lined catch tray help manage hand tools, small parts, and precious metal filings.\u003c\/li\u003e\n\u003cli\u003eThree side drawers with pull knobs keep commonly used tools and supplies organized and close at hand.\u003c\/li\u003e\n\u003cli\u003eLeft and right slide-out arm rests support your forearms during detailed sawing, filing, and setting work.\u003c\/li\u003e\n\u003cli\u003eInsert holes for mandrels provide convenient ring and bangle working positions at the bench.\u003c\/li\u003e\n\u003cli\u003eIncludes a bench pin (approximately 6\" including tang) for sawing and general bench tasks.\u003c\/li\u003e\n\u003cli\u003eSturdy hardwood construction designed to stand up to daily use in busy shops and studios.\u003c\/li\u003e\n\u003cli\u003eShips with legs detached and requires only minimal assembly after delivery.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBench Width\u003c\/td\u003e\n\u003ctd\u003e37-1\/4\" (947 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBench Depth\u003c\/td\u003e\n\u003ctd\u003e18-3\/4\" (476 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight to Benchtop\u003c\/td\u003e\n\u003ctd\u003e36-3\/8\" (925 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight to Railing\u003c\/td\u003e\n\u003ctd\u003e38\" (965 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBenchtop Thickness\u003c\/td\u003e\n\u003ctd\u003e3\/4\" (19 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBench Weight\u003c\/td\u003e\n\u003ctd\u003e93 lb (42 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTop Drawer Interior\u003c\/td\u003e\n\u003ctd\u003e1\" H x 7-3\/4\" W x 14-1\/2\" D (25 mm x 197 mm x 368 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMiddle \u0026amp; Lower Drawer Interior\u003c\/td\u003e\n\u003ctd\u003e2\" H x 7-3\/4\" W x 14-1\/2\" D (51 mm x 197 mm x 368 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eDurston\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eSince its U.S. launch in 2017, this model has become a best-selling bench in its class thanks to its balance of value, stability, and work-ready features.\u003c\/p\u003e\n\u003cp\u003eCompared with the Grobet jeweler's bench (Part #113.071), this bench is similar in size but easier to assemble, sturdier in use, and made from more durable hardwood rather than mostly pine.\u003c\/p\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43582963286230,"sku":"113.045","price":895.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/ships-free-durston-jeweler-s-workbench-otto-frei-1.jpg?v=1721165491"},{"product_id":"durston-drm-f130-powered-flat-rolling-mill-130mm-110v","title":"Durston 1072 Power Mill-DRM F130 Single Sided - All Flat","description":"\u003cp\u003eThe Durston DRM F130 powered flat rolling mill brings production-grade capability to the benchtop studio. Built on a one-piece cast iron frame with high-quality Swedish steel rolls running in heavy-duty roller bearings, this 110 V mill pairs a 1.5 hp (1.1 kW) motor with a high-precision epicyclic variable-speed gearbox for near-silent, continuous-duty performance. Variable speed runs 5–30 rpm in both forward and reverse, and an easy-to-read calibrated disc gives you exact roll gap measurement every time. Rolls are treated to RC 63\/64 hardness for long-lasting durability. Four guarded side extension rolls (4, 3, 2, and 1.5 mm half-rounds) expand forming capabilities beyond flat sheet reduction.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eVariable speed: \u003cstrong\u003e5–30 rpm\u003c\/strong\u003e forward and reverse\u003c\/li\u003e\n  \u003cli\u003eNear-silent, continuous-duty operation\u003c\/li\u003e\n  \u003cli\u003eOne-piece cast iron mill frame with cast iron epicyclic gearbox\u003c\/li\u003e\n  \u003cli\u003eSwedish roll steel treated to \u003cstrong\u003eRC 63\/64\u003c\/strong\u003e hardness\u003c\/li\u003e\n  \u003cli\u003eCalibrated disc for precise, repeatable roll gap settings\u003c\/li\u003e\n  \u003cli\u003eFour guarded half-round side extension rolls: 4, 3, 2, and 1.5 mm\u003c\/li\u003e\n  \u003cli\u003eForward\/reverse controls with speed up\/down\u003c\/li\u003e\n  \u003cli\u003eEmergency stop button; front and rear safety bars\u003c\/li\u003e\n  \u003cli\u003e1-year factory warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eDRM F130 Single Sided – All Flat\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMotor\u003c\/td\u003e\n\u003ctd\u003e1.5 hp (1.1 kW), 110 V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSpeed Range\u003c\/td\u003e\n\u003ctd\u003e5–30 rpm (forward \u0026amp; reverse)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eRoller Type\u003c\/td\u003e\n\u003ctd\u003eFlat\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eRoller Length\u003c\/td\u003e\n\u003ctd\u003e130 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eRoller Diameter\u003c\/td\u003e\n\u003ctd\u003e65 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSheet Thickness Capacity\u003c\/td\u003e\n\u003ctd\u003e6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSide Extension Rolls\u003c\/td\u003e\n\u003ctd\u003eFour half-rounds: 4, 3, 2, 1.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eOverall Dimensions\u003c\/td\u003e\n\u003ctd\u003e19-3\/4\" L × 15-3\/8\" W × 21-1\/4\" H (500 × 390 × 540 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eNet Weight\u003c\/td\u003e\n\u003ctd\u003e286 lb (130 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e110 V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1 year factory warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eThe cast iron gearbox is covered by a plastic guard and may not be visible in product images.\u003c\/li\u003e\n  \u003cli\u003eFor inside financing on this mill, please call or email Wyatt Frei at 800-772-3456 x107 or \u003cem\u003ewyatt@ottofrei.com\u003c\/em\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43582969479382,"sku":"128.137","price":5157.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-1072-power-mill-drm-f130-single-sided-all-flat-otto-frei-1.jpg?v=1719956790"},{"product_id":"durston-power-mill-drm-c130-single-sided-combination-flat-wire","title":"Durston 1071 Power Mill-DRM C130 Single Sided - Combination Flat\/Wire","description":"\u003cp\u003eThe Durston Power Mill DRM C130 is a bench-top powered combination rolling mill built for production-grade performance and precise control. Its one-piece cast iron mill frame houses high-quality steel rolls running in heavy-duty roller bearings, driven by a 1.5 hp (1.1 kW) 110 V motor paired with a high-precision epicyclic variable-speed gearbox. The result is near-silent, continuous operation with smooth, reliable throughput. Controls are straightforward and safety-conscious: forward\/reverse buttons, speed up\/down, emergency stop, front and rear safety bars, and guards over the extension rollers keep the operator protected at every step.\u003c\/p\u003e\u003cp\u003eThe C130's single-sided combination roller configuration handles both flat sheet reduction and wire rolling in one mill. An easy-to-read calibrated disc lets you dial in exact roll gap measurements, while Swedish roll steel treated to RC 63\/64 hardness ensures lasting precision and durability through demanding daily use.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eVariable speed: \u003cstrong\u003e5–30 rpm\u003c\/strong\u003e (forward and reverse)\u003c\/li\u003e\n\u003cli\u003eHigh-precision epicyclic variable-speed gearbox for smooth, consistent output\u003c\/li\u003e\n\u003cli\u003eOne-piece cast iron mill frame and cast iron gearbox for rigid, stable operation\u003c\/li\u003e\n\u003cli\u003eHeavy-duty roller bearings for near-silent continuous running\u003c\/li\u003e\n\u003cli\u003eSwedish roll steel treated to \u003cstrong\u003eRC 63\/64\u003c\/strong\u003e hardness\u003c\/li\u003e\n\u003cli\u003eEasy-to-read calibrated disc for exact roll gap measurement\u003c\/li\u003e\n\u003cli\u003e11 square wire grooves ranging from 8 mm down to 1 mm\u003c\/li\u003e\n\u003cli\u003eFour half-round side extension rolls: 4, 3, 2, and 1.5 mm\u003c\/li\u003e\n\u003cli\u003eForward\/reverse buttons, speed controls, emergency stop, and front\/rear safety bars\u003c\/li\u003e\n\u003cli\u003eGuards over extension rollers\u003c\/li\u003e\n\u003cli\u003e1-year factory warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMotor\u003c\/th\u003e\n\u003ctd\u003e1.1 kW (1.5 hp), 110 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpeed Range\u003c\/th\u003e\n\u003ctd\u003e5–30 rpm (forward and reverse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoll Size\u003c\/th\u003e\n\u003ctd\u003e130 mm × 65 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoller Type\u003c\/th\u003e\n\u003ctd\u003eCombination flat\/wire, single-sided\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheet Thickness Capacity\u003c\/th\u003e\n\u003ctd\u003e6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWire Grooves\u003c\/th\u003e\n\u003ctd\u003e11 square sizes, 8 mm – 1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Wire Capacity\u003c\/th\u003e\n\u003ctd\u003e8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSide Extension Rolls\u003c\/th\u003e\n\u003ctd\u003eFour half-rounds: 4, 3, 2, 1.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall Dimensions\u003c\/th\u003e\n\u003ctd\u003e19-3\/4\" × 15-3\/8\" × 21-1\/4\" H (500 × 390 × 540 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNet Weight\u003c\/th\u003e\n\u003ctd\u003e286 lb (130 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e1-year factory warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eNotes\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eFinancing available:\u003c\/strong\u003e For in-house financing on Durston Power Mills, contact Wyatt Frei at 800-772-3456 x107 or \u003ca href=\"mailto:wyatt@ottofrei.com\"\u003ewyatt@ottofrei.com\u003c\/a\u003e.\u003c\/p\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43582970233046,"sku":"128.138","price":5157.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-1071-power-mill-drm-c130-single-sided-combination-flatwire-otto-frei-1.jpg?v=1689355361"},{"product_id":"durston-student-jewelers-workbench-plus","title":"Durston Student Jewelers Workbench Plus-Ships UPS","description":"\u003cp\u003eThe student jeweler's workbench plus provides a compact, stable platform for learning and hobby work, with a dedicated work area and integrated apron so you can start practicing core bench skills right away. Since 2023, all benches in this model line ship with the larger apron that drapes comfortably between your legs, giving the bench a more enclosed, focused feel while you work.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThick hardwood worktop with protective wooden railing for a secure working edge.\u003c\/li\u003e\n\u003cli\u003eCurved cutout area with bench pin hole and included bench pin for sawing and filing.\u003c\/li\u003e\n\u003cli\u003eRight- and left-hand arm supports to steady your forearms during detailed bench tasks.\u003c\/li\u003e\n\u003cli\u003eTwo different size mandrel holes to position ring and forming mandrels at the bench.\u003c\/li\u003e\n\u003cli\u003eSide-mounted tool holder that adds extra width for keeping frequently used tools close.\u003c\/li\u003e\n\u003cli\u003eOversized bench apron designed to hang between your legs and collect filings and scrap.\u003c\/li\u003e\n\u003cli\u003eFire-retardant apron surface with eyelets and rope fastenings for secure attachment.\u003c\/li\u003e\n\u003cli\u003eQuick assembly design; ships disassembled with straightforward, illustrated instructions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBench Width\u003c\/td\u003e\n\u003ctd\u003e36-5\/8\" (930 mm); add 4\" (100 mm) with tool holder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBench Depth\u003c\/td\u003e\n\u003ctd\u003e23-1\/4\" (590 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall Height\u003c\/td\u003e\n\u003ctd\u003e37-1\/4\" (950 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorktop Height\u003c\/td\u003e\n\u003ctd\u003e36\" (915 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorktop Thickness\u003c\/td\u003e\n\u003ctd\u003e1\" (25 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBench Weight\u003c\/td\u003e\n\u003ctd\u003e34 lb (15.5 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorktop Material\u003c\/td\u003e\n\u003ctd\u003eEco-friendly \u003cem\u003eHevea brasiliensis\u003c\/em\u003e hardwood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBench Apron Size\u003c\/td\u003e\n\u003ctd\u003e31\" (787 mm) wide x 14-1\/8\" (359 mm) deep; approx. 10-3\/8\" (264 mm) deep at center\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBench Apron Material\u003c\/td\u003e\n\u003ctd\u003eFire-retardant PU (polyurethane) leatherette with metal eyelets and rope fastenings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eDurston\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eTo avoid heat damage when soldering or using a torch at the bench, unhook the front of the apron and let it drop out of the way, then reattach it after the area has cooled.\u003c\/p\u003e\n\u003cp\u003eBay Area customers can save on shipping with local pickup available from our Oakland warehouse; contact us for current pickup details.\u003c\/p\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43583045075158,"sku":"113.039STU","price":348.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-student-jewelers-workbench-plus-ships-ups-otto-frei-1.jpg?v=1719956764"},{"product_id":"durston-agile-c130-combo-rolling-mill","title":"Durston 1029 Agile C130 Combo Rolling Mill","description":"\u003cp\u003eThe \u003cem\u003e\u003cstrong\u003eDurston Agile C130 Combination Rolling Mill\u003c\/strong\u003e\u003c\/em\u003e delivers professional-grade performance at a more accessible price point by using a lighter frame construction — engineered to handle the demands of everyday studio use without any compromise on quality or durability.\u003c\/p\u003e\u003cp\u003eA traditional T-bar replaces the heavy cast handwheel for roll opening adjustment, contributing to the mill's reduced weight and competitive pricing. The rolls are induction hardened to 64 HRC to a depth of 6 mm, ensuring long-lasting surface integrity. Bearings are self-lubricating and maintenance-free, just like those found in the premium DRM line.\u003c\/p\u003e\u003cp\u003eThe heavy-duty 5-to-1 gearbox is a standout feature — making roll adjustment significantly easier and reducing operator fatigue during extended use. Behind the cover, two specially formed gears deliver exceptionally smooth rolling action. A protective guard around the top gears adds an important safety measure for the working studio.\u003c\/p\u003e\u003cp\u003eThe combination roller configuration gives jewelers and metalsmiths versatile forming capability in a single mill: a flat rolling area for sheet reduction, 11 traditional wire grooves ranging from 8 mm down to 1 mm, and half-round profiles in five sizes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA note on wire grooves:\u003c\/strong\u003e The grooves in this mill use the traditional wire groove profile — a six-sided irregular hexagon shape (sometimes called diamond or square wire). This profile is structurally strong, straightforward to produce, and ideal for reducing wire diameter for use with a variety of drawplate profiles. Traditional wire grooves are best suited for reducing wire diameter, not for producing finished wire profiles.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLighter frame construction than the DRM 130 series — designed for everyday use without quality compromise\u003c\/li\u003e\n\u003cli\u003eT-bar roll opening adjustment replaces heavy cast handwheel\u003c\/li\u003e\n\u003cli\u003eRolls induction hardened to 64 HRC to a depth of 6 mm\u003c\/li\u003e\n\u003cli\u003eSelf-lubricating, maintenance-free bearings\u003c\/li\u003e\n\u003cli\u003eHeavy-duty 5-to-1 gearbox for easier, smoother rolling\u003c\/li\u003e\n\u003cli\u003eTwo specially formed gears behind the cover for smooth operation\u003c\/li\u003e\n\u003cli\u003eProtective guard around top gears for added safety\u003c\/li\u003e\n\u003cli\u003eCombination roller: flat sheet area, wire grooves, and half-round profiles\u003c\/li\u003e\n\u003cli\u003e11 traditional wire groove sizes (8 mm – 1 mm)\u003c\/li\u003e\n\u003cli\u003eHalf-round grooves in 5 sizes: 6, 5, 4, 3, and 2 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eAgile C130\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRoll Size\u003c\/td\u003e\n\u003ctd\u003e130 mm × 60 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRoller Length\u003c\/td\u003e\n\u003ctd\u003e130 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRoller Diameter\u003c\/td\u003e\n\u003ctd\u003e60 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRoller Type\u003c\/td\u003e\n\u003ctd\u003eCombination\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlat Roller Area\u003c\/td\u003e\n\u003ctd\u003e60 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSheet Thickness Capacity\u003c\/td\u003e\n\u003ctd\u003e6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWire Grooves\u003c\/td\u003e\n\u003ctd\u003e11 sizes, 8 mm – 1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Wire Capacity\u003c\/td\u003e\n\u003ctd\u003e8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHalf-Round Sizes\u003c\/td\u003e\n\u003ctd\u003e6, 5, 4, 3, and 2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGear Ratio\u003c\/td\u003e\n\u003ctd\u003e5-to-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRoll Hardness\u003c\/td\u003e\n\u003ctd\u003e64 HRC to 6 mm depth (induction hardened)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet Weight\u003c\/td\u003e\n\u003ctd\u003e87 lbs (39.7 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43583050154198,"sku":"128.122AGCO","price":1190.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/128.122AGCONEW1_thumb_188218dc-a1c3-4fa0-823e-15d9506e5b2f.jpg?v=1758929662"},{"product_id":"durston-agile-f130mm-flat-rolling-mill-1030","title":"Durston 1030 Agile F130mm Flat Rolling Mill","description":"\u003cp\u003eThe \u003cstrong\u003eDurston 1030 Agile F130mm Flat Rolling Mill\u003c\/strong\u003e delivers professional-grade rolling performance at a more accessible price point. Durston achieved this by employing a thinner frame than the premium DRM 130 series, resulting in a slightly lighter mill—without any compromise in structural integrity or day-to-day durability. A traditional T-bar replaces the heavy cast handwheel for roll opening adjustment, contributing to the weight and cost savings that make the Agile series so competitive.\u003c\/p\u003e\u003cp\u003eThe flat rolls are \u003cstrong\u003einduction hardened to 64 HRC to a depth of 6mm\u003c\/strong\u003e, ensuring long-lasting surface hardness that stands up to repeated use with a wide range of metals. The \u003cstrong\u003eheavy-duty 5-to-1 gearbox\u003c\/strong\u003e—widely regarded as unrivaled in its class—dramatically reduces the effort required to turn the rolls. Behind the protective cover, two specially formed gears work together for exceptionally smooth rolling action. A protective guard around the top gears adds an important safety feature for the working studio environment.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInduction-hardened rolls at 64 HRC to a depth of 6mm for lasting surface durability\u003c\/li\u003e\n\u003cli\u003eHeavy-duty 5-to-1 gearbox reduces turning effort and provides smooth, controlled rolling\u003c\/li\u003e\n\u003cli\u003eTwo specially formed internal gears behind cover for enhanced rolling smoothness\u003c\/li\u003e\n\u003cli\u003eThinner frame design reduces weight compared to the DRM 130 series while maintaining full structural support\u003c\/li\u003e\n\u003cli\u003eT-bar roll opening adjustment replaces cast handwheel for a lighter, streamlined design\u003c\/li\u003e\n\u003cli\u003eProtective guard around top gears for added operator safety\u003c\/li\u003e\n\u003cli\u003eFlat roller configuration suitable for sheet and strip reduction\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eDurston 1030 Agile F130\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoller Type\u003c\/th\u003e\n\u003ctd\u003eFlat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoll Size\u003c\/th\u003e\n\u003ctd\u003e130mm × 60mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoller Length\u003c\/th\u003e\n\u003ctd\u003e130mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoller Diameter\u003c\/th\u003e\n\u003ctd\u003e60mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheet Thickness Capacity\u003c\/th\u003e\n\u003ctd\u003e6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoller Hardness\u003c\/th\u003e\n\u003ctd\u003e64 HRC (induction hardened to 6mm depth)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGear Ratio\u003c\/th\u003e\n\u003ctd\u003e5-to-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e16-1\/4\"L × 8-3\/4\"W × 14-1\/4\"H (410mm × 220mm × 365mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNet Weight\u003c\/th\u003e\n\u003ctd\u003e88 lbs (39.9 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43583050514646,"sku":"128.123AGFL","price":1128.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-1030-agile-f130mm-flat-rolling-mill-otto-frei-1.jpg?v=1719956760"},{"product_id":"durston-1564-large-necklace-mandrel-cast-iron","title":"Durston 1564 Large Necklace Mandrel","description":"\u003cp\u003eThe Durston 1564 Large Necklace Mandrel is a highly polished cast iron forming tool designed for jewelers and metalsmiths who work with necklace construction and draping. Known in Germany as the \u003cem\u003eIron Maiden\u003c\/em\u003e, this bust-form mandrel serves a dual purpose: it functions as a precise forming surface for shaping necklaces directly on the form, and it serves as an attractive counter or window display piece.\u003c\/p\u003e\u003cp\u003eWork directly on the polished cast iron surface using a light hammer or firm mallet to shape metal, or use wax to design naturally draped necklace compositions. The smooth, highly polished finish ensures clean contact with metal without marring your work.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHighly polished cast iron bust-form mandrel\u003c\/li\u003e\n\u003cli\u003eShape necklaces directly using a light hammer or firm mallet\u003c\/li\u003e\n\u003cli\u003eCompatible with wax working techniques for natural draping designs\u003c\/li\u003e\n\u003cli\u003eServes as an attractive counter or window display\u003c\/li\u003e\n\u003cli\u003eKnown as the \u003cem\u003eIron Maiden\u003c\/em\u003e in Germany\u003c\/li\u003e\n\u003cli\u003eSubstantial weight provides stability during forming work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eDurston 1564\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eCast iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHighly polished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e9-1\/4 in. (235 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e8 in. (200 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e4-1\/2 in. (108 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNet Weight\u003c\/th\u003e\n\u003ctd\u003e11.5 lbs.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43583264456918,"sku":"112.273LG","price":146.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-large-necklace-mandrel-otto-frei.jpg?v=1719956709"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/collections\/durston-otto-frei.jpg?v=1726692593","url":"https:\/\/www.ottofrei.com\/collections\/durston-rolling-mills-jewelry-tools.oembed?page=7","provider":"Otto Frei","version":"1.0","type":"link"}