{"title":"Forming","description":"","products":[{"product_id":"durston-1313-ring-shank-bender-nylon-dies","title":"Durston 1313-11 Piece Ring Shank Bender with Nylon Dies","description":"\u003cp\u003eThis ring shank bending system brings matched steel and nylon dies together in a compact stand, giving you a dedicated station for forming ring shanks and curved elements with consistent results. The dies seat positively in the jig so each bend feels controlled and repeatable under hand pressure.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSpace-saving vertical storage system holds the bending jig below and the die sets above for quick, organized access.\u003c\/li\u003e\n\u003cli\u003eTop die tray swivels out of the way to open up the working area around the bender during setup and forming.\u003c\/li\u003e\n\u003cli\u003eMatched forming and bed dies support the metal from both sides, helping to produce accurate, repeatable bends.\u003c\/li\u003e\n\u003cli\u003eTool-steel dies are hardened and polished, with radiused edges designed to help reduce marking on the metal.\u003c\/li\u003e\n\u003cli\u003eIncludes nylon dies that provide additional forming options and can help protect more delicate surfaces.\u003c\/li\u003e\n\u003cli\u003eBending jig and dies are precision made for smooth operation and reliable performance in daily shop use.\u003c\/li\u003e\n\u003cli\u003eBender can be mounted to a worktable with clamps or by bolting through the mounting holes to suit your setup.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTool Type\u003c\/td\u003e\n\u003ctd\u003eRing shank bending system with matched dies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSteel Die Sets\u003c\/td\u003e\n\u003ctd\u003e11 matched die sets (forming die + bed)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDie Shapes\u003c\/td\u003e\n\u003ctd\u003eRound, square, and rhombus profiles for varied ring and shank forms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDie Material\u003c\/td\u003e\n\u003ctd\u003eHardened, polished tool steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNylon Dies\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage System\u003c\/td\u003e\n\u003ctd\u003eIntegrated stand with lower bender mount and upper swiveling die tray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eClamps or bench bolts through base mounting holes (hardware not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufactured In\u003c\/td\u003e\n\u003ctd\u003eGreat Britain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eDurston\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eItem\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003cth\u003eQty\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBending jig\u003c\/td\u003e\n\u003ctd\u003eRing shank bender body with mounting base\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSteel die sets\u003c\/td\u003e\n\u003ctd\u003eMatched tool-steel forming dies with corresponding beds\u003c\/td\u003e\n\u003ctd\u003e11 sets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNylon dies\u003c\/td\u003e\n\u003ctd\u003eNylon forming dies for alternative bending and surface protection\u003c\/td\u003e\n\u003ctd\u003eSet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage stand\u003c\/td\u003e\n\u003ctd\u003eSpace-saving base with upper swiveling die tray\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eEach steel die includes a forming shape and matching bed, designed to work together in the jig for accurate ring shank forming. For best results, mount the bender securely to a stable bench surface using suitable clamps or bolts (mounting hardware not included).\u003c\/p\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":42889043345622,"sku":"148.099","price":433.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-1313-11-piece-ring-shank-bender-with-nylon-dies-otto-frei-1.jpg?v=1719959225"},{"product_id":"durston-1309-complete-jump-ringer","title":"Durston 1309 The Complete Jump Ringer","description":"\u003cp\u003eThe Durston 1309 Complete Jump Ringer is a bench-mounted jump ring making machine designed for use with a Foredom No. 30 style handpiece and a flex shaft machine. It allows rapid, repeatable production of jump rings from soft non-ferrous jewelry wire, with precise control over ring size and consistency. As the coil builds and the saw begins its steady cut, finished rings collect in a clean, predictable rhythm.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for mass production of jump rings from soft non-ferrous wire\u003c\/li\u003e\n\u003cli\u003eUpdated base-mounted coil holder for improved stability\u003c\/li\u003e\n\u003cli\u003eSafety coil winder can be positioned freely on the workbench\u003c\/li\u003e\n\u003cli\u003eExtended mandrel length allows longer coils and higher output per run\u003c\/li\u003e\n\u003cli\u003eHigh stem design provides increased hand clearance and full 360° positioning\u003c\/li\u003e\n\u003cli\u003eIncludes a comprehensive set of mandrels for a wide range of ring sizes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Wire Size\u003c\/th\u003e\n\u003ctd\u003e13 gauge (1.85 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMandrel Size Range\u003c\/th\u003e\n\u003ctd\u003e2.0–12.0 mm inside diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMandrel Increments\u003c\/th\u003e\n\u003ctd\u003e0.5 mm steps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMandrel Length\u003c\/th\u003e\n\u003ctd\u003e4-3\/4 in (120.7 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Materials\u003c\/th\u003e\n\u003ctd\u003eGold, silver, copper and other soft non-ferrous wires\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufactured In\u003c\/th\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eDurston\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eItem\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMandrels\u003c\/td\u003e\n\u003ctd\u003e21 mandrels, 2.0–12.0 mm in 0.5 mm sizes (2.0, 2.5, 3.0, 4.0 mm undrilled; all others drilled)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoil Holder\u003c\/td\u003e\n\u003ctd\u003e2-sided coil holder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSaw Blade\u003c\/td\u003e\n\u003ctd\u003e1-1\/4\" high-speed steel blade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSaw Blade Mandrel\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHandpiece Holder\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoil Winder\u003c\/td\u003e\n\u003ctd\u003eWith keyless chuck\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHex Keys\u003c\/td\u003e\n\u003ctd\u003eSet of 3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eFor use with a Foredom No. 30 type handpiece powered by a flex shaft machine. Flex shaft and handpiece sold separately.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eNot for use with platinum, titanium, steel, or niobium wire. Outside diameter of finished jump rings will vary depending on the wire diameter used.\u003c\/p\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43536326033622,"sku":"143.209","price":376.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-1309-the-complete-jump-ringer-otto-frei-1.jpg?v=1719959164"},{"product_id":"14k-stamp-ring-stamping-machine-jewelry-marking-pliers","title":"14K Stamp For Ring Stamping Machine \u0026 Jewelry Marking Pliers","description":"\u003cp\u003eThe 14K stamp is designed for use with ring stamping machines and jewelry marking pliers, providing a clean, precise impression for hallmarking finished pieces. Each stamp is secured in place using a set-screw, ensuring a stable, consistent strike every time. The stamping face is \u003cstrong\u003eslightly radiused\u003c\/strong\u003e to conform to the curved interior surface of rings, delivering a legible, professional mark even on rounded shanks.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with ring stamping machines and jewelry marking pliers\u003c\/li\u003e\n\u003cli\u003eSecured via set-screw for stable, repeatable positioning\u003c\/li\u003e\n\u003cli\u003eSlightly radiused face designed for the inside of rings\u003c\/li\u003e\n\u003cli\u003eProduces a clear 14K hallmark impression\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eImpression Height\u003c\/th\u003e\n\u003ctd\u003e0.80 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStamp Text\u003c\/th\u003e\n\u003ctd\u003e14K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting Method\u003c\/th\u003e\n\u003ctd\u003eSet-screw\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFace Profile\u003c\/th\u003e\n\u003ctd\u003eSlightly radiused for ring interiors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eThis product is intended for professional use with compatible ring stamping machines and jewelry marking pliers. Verify set-screw compatibility with your specific machine or pliers before use. Impression height is 0.80 mm unless otherwise noted on individual items.\u003c\/p\u003e","brand":"Otto Frei","offers":[{"title":"Default Title","offer_id":43536388751574,"sku":"155.352","price":20.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/14k-stamp-for-ring-stamping-machine-and-jewelry-marking-pliers-otto-frei.jpg?v=1719959153"},{"product_id":"18k-hallmark-stamp-straight-square-shank-1mm","title":"18K Straight Square Shank Hallmark Stamp 1\/25\" (1.00mm) Impression Height","description":"\u003cp\u003eThis straight square shank 18K hallmark stamp is precision cut from heat-treated tool steel, designed for marking gold alloys containing no less than 75% pure gold by weight. The straight shank configuration is ideal for stamping flat surfaces, leaving a clean, sunken impression with each strike.\u003c\/p\u003e\u003cp\u003eThe 1\/25\" (1.00mm) measurement refers to the \u003cem\u003eheight of the impression\u003c\/em\u003e, not the width. If you need to mark the inside of rings or curved interior surfaces, a bent stamp is recommended instead of this straight style.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMarks gold alloys with a minimum of 75% pure gold content by weight\u003c\/li\u003e\n\u003cli\u003ePrecision cut heat-treated tool steel construction\u003c\/li\u003e\n\u003cli\u003eStraight square shank design for use on flat surfaces\u003c\/li\u003e\n\u003cli\u003eLeaves a sunken impression\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eImpression Height\u003c\/th\u003e\n\u003ctd\u003e1\/25\" (1.00mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShank Type\u003c\/th\u003e\n\u003ctd\u003eStraight square shank\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eHeat-treated tool steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eImpression Style\u003c\/th\u003e\n\u003ctd\u003eSunken\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntended Use\u003c\/th\u003e\n\u003ctd\u003eFlat surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eMade in the USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eNotes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe 1.00mm measurement refers to the height of the impression, not the width.\u003c\/li\u003e\n\u003cli\u003eFor marking the inside of rings or curved surfaces, use a bent hallmark stamp instead of this straight style.\u003c\/li\u003e\n\u003cli\u003eThis product is subject to California Proposition 65 warnings.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Otto Frei","offers":[{"title":"Default Title","offer_id":43552285393110,"sku":"155.294","price":33.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/18k-straight-square-shank-hallmark-stamp-125-1-00mm-impression-height-otto-frei.jpg?v=1719959079"},{"product_id":"durston-1061-pedestal-stand-rolling-mills","title":"Durston 1061 Pedestal Stand for Rolling Mills","description":"\u003cp\u003eThe \u003cstrong\u003eDurston 1061 Pedestal Stand\u003c\/strong\u003e is a purpose-built floor stand designed to securely mount Durston rolling mills at a comfortable working height. Pre-drilled to accommodate a wide range of Durston mill models, this stand provides a stable, dedicated workstation for sheet and wire rolling operations in a professional studio or shop environment.\u003c\/p\u003e\n\n\u003cp\u003eCompatible models include all \u003cstrong\u003eDurston Mini-Mills\u003c\/strong\u003e, the full \u003cstrong\u003eDRM line (DRM 100, DRM 130, and DRM 150)\u003c\/strong\u003e in both reduction gear and non-reduction gear configurations, and the \u003cstrong\u003eAgile line\u003c\/strong\u003e of Durston rolling mills (from April 2019). Note that the Agile 165 aligns with 2 holes on the pedestal stand; the recommended minimum for secure mounting is 2 holes used.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eThis stand does not fit any version, new or old, of the D2 120, D2 130, or D4 158 over-and-under rolling mills.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eMounting hardware for securing the stand to the floor is not included. If permanent floor mounting is not possible in your shop, a practical workaround is to mount the pedestal to a sheet of 1\/2\" or 3\/4\" plywood cut at least 6 feet long and 3 feet wide, with the stand centered so the rolling mill handle grip runs perpendicular to the long dimension of the plank.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePre-drilled for Durston Mini-Mills, DRM 100, DRM 130, DRM 150, and Agile line mills (from April 2019)\u003c\/li\u003e\n\u003cli\u003eFits both reduction gear and non-reduction gear DRM models\u003c\/li\u003e\n\u003cli\u003eIncludes 4 mounting bolts with nuts and washers for mill-to-stand attachment\u003c\/li\u003e\n\u003cli\u003eAgile 165 compatible using 2 alignment holes (2-hole mounting meets recommended minimum)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDoes not fit D2 120, D2 130, or D4 158 over-and-under rolling mills\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eFloor-mounting hardware not included\u003c\/li\u003e\n\u003cli\u003eMade in Great Britain\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003e1061\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e11-3\/4\" (300 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDepth\u003c\/th\u003e\n\u003ctd\u003e13-3\/4\" (350 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e35-3\/8\" (900 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncludes\u003c\/th\u003e\n\u003ctd\u003e4 mounting bolts with nuts and washers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eMade in Great Britain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFloor-mounting hardware is \u003cem\u003enot\u003c\/em\u003e included with this stand.\u003c\/li\u003e\n\u003cli\u003eThe Agile 165 aligns with 2 holes on the pedestal; using a minimum of 2 holes for mounting is recommended.\u003c\/li\u003e\n\u003cli\u003eThis stand is \u003cstrong\u003enot compatible\u003c\/strong\u003e with the D2 120, D2 130, or D4 158 rolling mills in any version.\u003c\/li\u003e\n\u003cli\u003eIf permanent floor mounting is not an option, consider bolting the stand to a sturdy sheet of 1\/2\"–3\/4\" plywood (at least 6' × 3') for a stable freestanding base.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43553070710998,"sku":"128.173","price":355.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-pedestal-stand-for-rolling-mills-otto-frei.jpg?v=1719959074"},{"product_id":"durston-21-punch-matched-dapping-set-flat-die","title":"Durston 1103 Matched 21 Piece Dapping Punch Set with Flat Die-3mm to 36mm Punches","description":"\u003cp\u003eThe Durston 21 Punch Matched Dapping Punch Set offers professional jewelers and metalsmiths a comprehensive range of highly polished forming punches paired with a flat dapping block featuring matched spherical depressions. Spanning 3.0mm to 36.0mm, this set delivers the precision and durability expected from W. Durston Ltd of High Wycombe, Great Britain — crafted from properly hardened, top-quality English steel for a lifetime of professional use.\u003c\/p\u003e\u003cp\u003eEach punch is matched to a corresponding depression in the flat dapping block, enabling accurate, consistent dome forming across a wide range of sizes. The set also includes four additional depressions on the block that are intentionally larger than their corresponding punches, providing the necessary clearance to accommodate the thickness of metal being formed. A unique storage tray keeps all components organized and protected.\u003c\/p\u003e\u003cp\u003eThis set is equivalent to the Durston 125.008 Large matched dapping punch and die set, but without the three largest dies — making it an ideal mid-range option for studios that work primarily within the 3.0mm–36.0mm size range.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e21 matched dapping punches ranging from 3.0mm (1\/8\") to 36.0mm (1-3\/8\")\u003c\/li\u003e\n\u003cli\u003eFlat dapping block with 23 spherical depressions sized 3.0mm through 38.0mm\u003c\/li\u003e\n\u003cli\u003eFour largest block depressions intentionally oversized to allow for metal thickness during forming\u003c\/li\u003e\n\u003cli\u003ePunches and block made from properly hardened, highly polished English steel\u003c\/li\u003e\n\u003cli\u003eUnique storage tray included to keep the set organized and ready for use\u003c\/li\u003e\n\u003cli\u003eComparable in quality to German and Italian equivalents\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eHardened, polished English steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eW. Durston Ltd, High Wycombe, Great Britain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNumber of Punches\u003c\/th\u003e\n\u003ctd\u003e21\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePunch Size Range\u003c\/th\u003e\n\u003ctd\u003e3.0mm (1\/8\") – 36.0mm (1-3\/8\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNumber of Block Depressions\u003c\/th\u003e\n\u003ctd\u003e23\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlock Depression Range\u003c\/th\u003e\n\u003ctd\u003e3.0mm – 38.0mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncludes Storage Tray\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e21 dapping punches: 3.0mm, 4.0mm, 5.0mm, 6.0mm, 7.0mm, 8.0mm, 9.0mm, 10.0mm, 11.0mm, 12.0mm, 13.0mm, 14.0mm, 15.0mm, 17.0mm, 19.0mm, 21.0mm, 23.0mm, 25.0mm, 28.0mm, 32.0mm, and 36.0mm\u003c\/li\u003e\n\u003cli\u003eFlat dapping block with 23 spherical depressions: 3.0mm, 4.0mm, 5.0mm, 6.0mm, 7.0mm, 8.0mm, 9.0mm, 10.0mm, 11.0mm, 12.0mm, 13.0mm, 14.0mm, 15.0mm, 16.0mm, 17.0mm, 19.0mm, 21.0mm, 23.0mm, 25.0mm, 27.0mm, 30.0mm, 34.0mm, and 38.0mm\u003c\/li\u003e\n\u003cli\u003eStorage tray\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eNotes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe four largest depressions on the flat block (27.0mm, 30.0mm, 34.0mm, and 38.0mm) are larger than the largest punches in the set — this is intentional design to allow room for the metal being formed.\u003c\/li\u003e\n\u003cli\u003eThis set is equivalent to the Durston 125.008 Large matched dapping punch and die set, minus the three largest dies.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43553071071446,"sku":"125.049","price":332.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-21-punch-matched-dapping-punch-set-with-flat-die-3mm-to-36mm-punches-otto-frei.jpg?v=1719959074"},{"product_id":"durston-double-d2-130mm-combination-rolling-mill","title":"Durston 1051 Double D2 130mm Rolling Mill","description":"\u003cp\u003e\u003cstrong\u003eThe Durston Double D2-130mm Rolling Mill\u003c\/strong\u003e is a compact, production-ready combination mill built for professional shops and schools that require both flat sheet rolling and wire rolling in a single machine. Upper flat rolls and lower square wire rolls run on maintenance-free, lifetime-guaranteed bearings, while large hand-wheel adjusters, a groove indicator on the wire rolls, and a calibrated roll-gap dial in both millimeters and inches (down to 0.001\"\/0.025 mm) make repeatable setup fast and dependable. The dual reduction gearbox delivers either torque or speed on demand, and side extension half-rounds enable quick forming of \"D\" profiles without additional tooling.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDual reduction gearbox with 7:1 and 3.5:1 ratios for power or speed as needed\u003c\/li\u003e\n\u003cli\u003eCalibrated roll-gap dial graduated in both inches and millimeters for precise thickness control\u003c\/li\u003e\n\u003cli\u003eWire groove indicator to track the last pass position\u003c\/li\u003e\n\u003cli\u003eSide extension half-rounds for quick forming of \"D\" profiles in four sizes\u003c\/li\u003e\n\u003cli\u003eMaintenance-free bearings on both upper and lower rolls\u003c\/li\u003e\n\u003cli\u003e19 square wire groove sizes ranging from 1 mm to 10 mm\u003c\/li\u003e\n\u003cli\u003eLarge hand-wheel adjusters for smooth, controlled gap setting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eDurston 1051 Double D2-130mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoller Type\u003c\/th\u003e\n\u003ctd\u003eCombination (flat upper \/ square wire lower)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoller Length\u003c\/th\u003e\n\u003ctd\u003e130 mm (5-1\/8\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoller Diameter\u003c\/th\u003e\n\u003ctd\u003e60 mm (2-3\/8\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheet Thickness Capacity\u003c\/th\u003e\n\u003ctd\u003e6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWire Grooves\u003c\/th\u003e\n\u003ctd\u003e19 square sizes, 1 mm – 10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax Wire Capacity\u003c\/th\u003e\n\u003ctd\u003e10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGear Ratios\u003c\/th\u003e\n\u003ctd\u003e7:1 and 3.5:1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSide Extensions\u003c\/th\u003e\n\u003ctd\u003eHalf-round \"D\" shapes: 4, 3, 2, 1.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall Dimensions\u003c\/th\u003e\n\u003ctd\u003e16-1\/2\" L × 8-3\/4\" W × 22-1\/4\" H (420 × 220 × 565 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNet Weight\u003c\/th\u003e\n\u003ctd\u003e163 lb (74 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eFinancing is available for this mill. Inside and outside financing options can be arranged. For inside financing inquiries, contact Wyatt Frei at 800-772-3456 x107 or \u003ca href=\"mailto:wyatt@ottofrei.com\"\u003ewyatt@ottofrei.com\u003c\/a\u003e.\u003c\/p\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43553071399126,"sku":"128.116","price":3426.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-1051-double-d2-130mm-rolling-mill-otto-frei.jpg?v=1689351864"},{"product_id":"durston-agile-c110-combo-rolling-mill","title":"Durston 1019 Agile C110 Combo Rolling Mill","description":"\u003cp\u003eThe \u003cstrong\u003eDurston Agile C110 Combination Rolling Mill\u003c\/strong\u003e delivers professional-grade performance in a lighter, more competitively priced package. Engineered with a thinner frame than the DRM 110 line, the Agile C110 maintains full structural integrity for everyday studio use without sacrificing roll quality or durability. A traditional T-bar replaces the heavy cast handwheel for roll opening adjustment, contributing to meaningful weight and cost savings.\u003c\/p\u003e\u003cp\u003eThe combination rolls span 110mm and are divided into three functional zones: 50mm flat, 22mm half-round, and 33mm wire grooves — giving jewelers and metalsmiths versatile forming options in a single mill. Rolls are induction hardened to 64 HRC to a depth of 6mm, ensuring long-term wear resistance. Bearings are self-lubricating and maintenance free.\u003c\/p\u003e\u003cp\u003eThe heavy-duty 4-to-1 gearbox sets this mill apart, making roll turning significantly easier and reducing operator fatigue. Two specially formed gears behind the cover contribute to smoother rolling action. A protective guard surrounds the top gears for added safety.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLighter frame construction than DRM 110 series — no compromise on load capacity\u003c\/li\u003e\n\u003cli\u003eT-bar roll opening adjustment replaces cast handwheel for weight savings\u003c\/li\u003e\n\u003cli\u003eRolls induction hardened to 64 HRC to a depth of 6mm\u003c\/li\u003e\n\u003cli\u003eSelf-lubricating, maintenance-free bearings\u003c\/li\u003e\n\u003cli\u003eHeavy-duty 4-to-1 gearbox for easier turning\u003c\/li\u003e\n\u003cli\u003eTwo specially formed gears for smoother rolling action\u003c\/li\u003e\n\u003cli\u003eProtective guard around top gears\u003c\/li\u003e\n\u003cli\u003eCombination roll: 50mm flat, 22mm half-round, and 33mm wire groove zones\u003c\/li\u003e\n\u003cli\u003e9 wire groove sizes ranging from 7mm down to 1mm\u003c\/li\u003e\n\u003cli\u003e4 half-round groove sizes: 5 × 1.7mm, 4 × 1.4mm, 3 × 1.15mm, and 2 × 0.8mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eRoll Size\u003c\/th\u003e\n\u003ctd\u003e110mm × 50mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoller Type\u003c\/th\u003e\n\u003ctd\u003eCombination (Flat \/ Half-Round \/ Wire)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlat Section\u003c\/th\u003e\n\u003ctd\u003e50mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHalf-Round Section\u003c\/th\u003e\n\u003ctd\u003e22mm — sizes: 5 × 1.7mm, 4 × 1.4mm, 3 × 1.15mm, 2 × 0.8mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWire Groove Section\u003c\/th\u003e\n\u003ctd\u003e33mm — 9 sizes, 7mm–1mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoller Diameter\u003c\/th\u003e\n\u003ctd\u003e50mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoll Hardness\u003c\/th\u003e\n\u003ctd\u003e64 HRC to 6mm depth (induction hardened)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Sheet Thickness Capacity\u003c\/th\u003e\n\u003ctd\u003e6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Wire Capacity\u003c\/th\u003e\n\u003ctd\u003e7mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGear Ratio\u003c\/th\u003e\n\u003ctd\u003e4-to-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e13-1\/2″ L × 7-3\/4″ W × 12-1\/2″ H (345mm × 200mm × 320mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNet Weight\u003c\/th\u003e\n\u003ctd\u003e57 lbs. (26 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eNotes\u003c\/h3\u003e\u003cp\u003eThe wire grooves on this mill use a \u003cstrong\u003etraditional wire groove\u003c\/strong\u003e profile — a six-sided irregular hexagon shape (sometimes referred to as diamond or square wire). This geometry is structurally strong, straightforward to produce, and compatible with a wide range of drawplate profiles. \u003cstrong\u003eTraditional wire grooves are intended for reducing wire diameter,\u003c\/strong\u003e enabling the creation of varied wire profiles using drawplates. They are generally not used for producing finished wire product directly off the mill.\u003c\/p\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43553071857878,"sku":"128.124C110","price":1028.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/128.124C110NEW1_thumb_04885a91-a44e-4874-af3a-b5b096c8b1c0.jpg?v=1763489724"},{"product_id":"true-size-ring-mandrels-ikohe-sizes-1-16","title":"True Size Ring Mandrels","description":"\u003cp\u003eTrue Size Ring Mandrels are precision-calibrated tools designed to work seamlessly with the True Size Precision ring sizing system, eliminating costly sizing errors between the sales counter and the jeweler's bench. Manufactured by Ikohe — a leading name in professional jewelry tools sold worldwide — these mandrels were formerly branded as Wolf Tools True Size Ring Mandrels and continue to set the standard for sizing accuracy.\u003c\/p\u003e\u003cp\u003eEach mandrel is crafted from hardened steel and laser etched in 1\/4 sizes from 1–16, ensuring clear, durable markings that hold up to daily bench use. A built-in sizing gauge on the end allows jewelers to quickly measure the amount of stock needed to fabricate a ring at any given size. Precision manufactured using Swiss Made CNC machinery, these mandrels deliver the consistency professional jewelers demand.\u003c\/p\u003e\u003cp\u003eAvailable in two configurations: a standard Graduated model and a Graduated \u0026amp; Grooved model for added versatility in forming and sizing work.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePrecision calibrated to match the True Size Precision ring sizing system\u003c\/li\u003e\n\u003cli\u003eLaser etched in 1\/4 sizes from size 1–16 for clear, lasting readability\u003c\/li\u003e\n\u003cli\u003eBuilt-in sizing gauge on the end for quick stock measurement\u003c\/li\u003e\n\u003cli\u003eMade from hardened steel for durability at the bench\u003c\/li\u003e\n\u003cli\u003eManufactured using Swiss Made CNC machinery\u003c\/li\u003e\n\u003cli\u003eAvailable in Graduated or Graduated \u0026amp; Grooved configurations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eHardened steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize Range\u003c\/th\u003e\n\u003ctd\u003e1–16 (marked in 1\/4 sizes)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMarkings\u003c\/th\u003e\n\u003ctd\u003eLaser etched\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncludes\u003c\/th\u003e\n\u003ctd\u003eSizing gauge on end\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eIkohe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible System\u003c\/th\u003e\n\u003ctd\u003eTrue Size Precision ring sizing system\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eAvailable Options\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e143.075\u003c\/td\u003e\n\u003ctd\u003eGraduated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e143.075GR\u003c\/td\u003e\n\u003ctd\u003eGraduated \u0026amp; Grooved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Ikohe","offers":[{"title":"Graduated","offer_id":43553877033174,"sku":"143.075","price":41.95,"currency_code":"USD","in_stock":true},{"title":"Graduated \u0026 Grooved","offer_id":43553877065942,"sku":"143.075GR","price":45.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/true-size-ring-mandrels-otto-frei-1.jpg?v=1719959070"},{"product_id":"ster-sterling-bent-gooseneck-square-shank-hallmark-stamps-3-sizes","title":"STER (Sterling) Bent Square Shank Hallmark Stamps-3 Sizes","description":"\u003cp\u003eThese bent square shank \u003cstrong\u003eSTER\u003c\/strong\u003e hallmark stamps are made of precision-cut, heat-treated tool steel and are used for marking silver alloys that are no less than 0.925% fine silver by weight. Each stamp imprints the letters \u003cem\u003eSTER\u003c\/em\u003e, an abbreviation for Sterling Silver. The bent shank design — also known as a gooseneck stamp — allows for marking the inside of rings and other recessed areas that straight stamps cannot reach. These stamps produce clean, sunken impressions on precious metals. Made in the USA and Germany.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eMeasurement refers to the height of the impression, not the width.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eImprints \u003cstrong\u003eSTER\u003c\/strong\u003e — the standard abbreviation for Sterling Silver\u003c\/li\u003e\n\u003cli\u003eBent (gooseneck) shank design for marking the inside of rings and curved surfaces\u003c\/li\u003e\n\u003cli\u003eSquare shank for secure grip in stamp-holding tools\u003c\/li\u003e\n\u003cli\u003ePrecision-cut, heat-treated tool steel construction\u003c\/li\u003e\n\u003cli\u003eProduces sunken impressions on precious metals\u003c\/li\u003e\n\u003cli\u003eMade in the USA and Germany\u003c\/li\u003e\n\u003cli\u003eAvailable in three impression heights\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eHeat-treated tool steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShank Style\u003c\/th\u003e\n\u003ctd\u003eBent square shank (gooseneck)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eImpression Type\u003c\/th\u003e\n\u003ctd\u003eSunken (recessed)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMark Imprinted\u003c\/th\u003e\n\u003ctd\u003eSTER (Sterling Silver hallmark)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eUSA and Germany\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eAvailable Options\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eImpression Height\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e155.301\u003c\/td\u003e\n\u003ctd\u003e1.00 mm (1\/25\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e155.302\u003c\/td\u003e\n\u003ctd\u003e0.80 mm (1\/32\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e155.303\u003c\/td\u003e\n\u003ctd\u003e0.60 mm (1\/45\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Otto Frei","offers":[{"title":"1.00mm","offer_id":47551684739286,"sku":"155.301","price":33.0,"currency_code":"USD","in_stock":false},{"title":"0.80mm","offer_id":47551684772054,"sku":"155.302","price":33.0,"currency_code":"USD","in_stock":false},{"title":"0.60mm","offer_id":47551684804822,"sku":"155.303","price":33.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/ster-sterling-bent-square-shank-hallmark-stamps-3-sizes-otto-frei.jpg?v=1719959068"},{"product_id":"straight-round-shank-hallmark-stamps","title":"Straight Round Shank Stamps","description":"\u003cp\u003eThese straight round shank hallmark stamps are designed for use on non-ferrous metals. Constructed from 1\/4\" thick round steel, each stamp measures 3\" in length and is hardened for durability. Character height is approximately 1.25–1.50mm (slightly under 1\/16\"). The length of the impression varies depending on the number of characters in the stamp.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eNote: These round shank hallmark stamps have been discontinued. As remaining inventory sells out, they will no longer be available. Superior quality straight square shank hallmark stamps are available as an alternative.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHardened steel construction for use on non-ferrous metals\u003c\/li\u003e\n\u003cli\u003e1\/4\" diameter round shank\u003c\/li\u003e\n\u003cli\u003e3\" overall length\u003c\/li\u003e\n\u003cli\u003eCharacter height approximately 1.25–1.50mm (slightly under 1\/16\")\u003c\/li\u003e\n\u003cli\u003eImpression length varies by number of characters in the stamp\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eShank Shape\u003c\/th\u003e\n\u003ctd\u003eRound\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShank Diameter\u003c\/th\u003e\n\u003ctd\u003e1\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e3\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCharacter Height\u003c\/th\u003e\n\u003ctd\u003eApproximately 1.25–1.50mm (slightly under 1\/16\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eHardened steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntended Use\u003c\/th\u003e\n\u003ctd\u003eNon-ferrous metals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eAvailable Options\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eStamp\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e155.230\u003c\/td\u003e\n\u003ctd\u003ePEWTER\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eNotes\u003c\/h3\u003e\u003cp\u003eThese round shank hallmark stamps are discontinued. Stock is limited to remaining inventory only. For continued availability, consider the straight square shank hallmark stamps offered as a replacement.\u003c\/p\u003e","brand":"Otto Frei","offers":[{"title":"PEWTER","offer_id":43553877590230,"sku":"155.230","price":16.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/straight-round-shank-stamps-otto-frei.jpg?v=1719959068"},{"product_id":"durston-small-necklace-mandrel-cast-iron-8in","title":"Durston Small Necklace Mandrel","description":"\u003cp\u003eThe \u003cstrong\u003eDurston Small Necklace Mandrel\u003c\/strong\u003e is a highly polished cast iron forming tool designed for hammering, forging, and wax work to create naturally draping necklaces. Known in Germany as the \u003cem\u003e\"Iron Maiden,\"\u003c\/em\u003e this beautifully finished mandrel doubles as an attractive counter or window display piece, making it as functional on the bench as it is elegant in a retail setting. This is the smaller of the two necklace mandrel sizes available from Durston.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHighly polished cast iron construction for smooth forming surfaces\u003c\/li\u003e\n\u003cli\u003eIdeal for hammering, forging, and wax work\u003c\/li\u003e\n\u003cli\u003eDesigned to create natural draping necklace shapes\u003c\/li\u003e\n\u003cli\u003eAttractive enough for use as a counter or window display\u003c\/li\u003e\n\u003cli\u003eSmaller of two available necklace mandrel sizes\u003c\/li\u003e\n\u003cli\u003eMade in England by Durston\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e8\" (200 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e5-1\/2\" (140 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNeck Diameter\u003c\/th\u003e\n\u003ctd\u003e3-3\/4\" (95 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNet Weight\u003c\/th\u003e\n\u003ctd\u003e7.8 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eHighly polished cast iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCountry of Origin\u003c\/th\u003e\n\u003ctd\u003eEngland\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eDurston\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43557855756502,"sku":"112.273SM","price":97.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-small-necklace-mandrel-otto-frei.jpg?v=1719958949"},{"product_id":"durston-oval-bracelet-mandrel-15in-380mm","title":"Durston Oval Bracelet Mandrel 15\" (380mm) Long","description":"\u003cp\u003eThe Durston Oval Bracelet Mandrel is a professional-grade forming tool crafted from hardened steel with a smooth, highly polished surface. Measuring 15\" (380mm) in length, this mandrel is designed for shaping bracelets in gold, silver, copper, and other metals with precision and consistency. The oval cross-section allows jewelers and metalsmiths to form bracelets to a natural wrist-fitting profile. Manufactured in Great Britain by W. Durston \u0026amp; Son LTD., this mandrel reflects the quality and craftsmanship the Durston name is known for in professional jewelry studios worldwide.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHardened steel construction for durability and resistance to deformation\u003c\/li\u003e\n\u003cli\u003eSmooth, highly polished surface to prevent marring metal during forming\u003c\/li\u003e\n\u003cli\u003eOval cross-section profile for shaping bracelets to a natural wrist contour\u003c\/li\u003e\n\u003cli\u003eSuitable for use with gold, silver, copper, and other metals\u003c\/li\u003e\n\u003cli\u003e15\" (380mm) length provides ample working surface\u003c\/li\u003e\n\u003cli\u003eMade in Great Britain by W. Durston \u0026amp; Son LTD.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003e143.017\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e15\" (380mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTop Diameter\u003c\/th\u003e\n\u003ctd\u003e32 x 36mm (oval)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBottom Diameter\u003c\/th\u003e\n\u003ctd\u003e65 x 72mm (oval)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eHardened steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSurface Finish\u003c\/th\u003e\n\u003ctd\u003eSmooth, highly polished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCountry of Origin\u003c\/th\u003e\n\u003ctd\u003eGreat Britain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eW. Durston \u0026amp; Son LTD.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43557860770006,"sku":"143.019","price":165.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-oval-bracelet-mandrel-15-380mm-long-otto-frei.jpg?v=1719958949"},{"product_id":"replacement-punch-italian-disk-cutters-2-3-5mm","title":"Replacement Punch Only For Italian Disk Cutters","description":"\u003cp\u003eKeep your Italian disk cutter set fully operational with these individual replacement punches. Designed to cut perfectly round disks from sheet metal, these punches are sized to fit Italian disk cutter sets and deliver clean, precise results. For best performance, use with a hydraulic press or similar equipment; a mallet may also be used with care.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReplacement punch for use with Italian disk cutters\u003c\/li\u003e\n\u003cli\u003eCuts perfectly round metal disks\u003c\/li\u003e\n\u003cli\u003eBest results achieved with a hydraulic press\u003c\/li\u003e\n\u003cli\u003eCompatible with mallet use when care is taken\u003c\/li\u003e\n\u003cli\u003eAvailable in four sizes to match your cutter set\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAvailable Options\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eCompatible Disk Cutter(s)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e125.142-2\u003c\/td\u003e\n\u003ctd\u003e2mm\u003c\/td\u003e\n\u003ctd\u003e125.142 \u0026amp; 125.138\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e125.142-2.5\u003c\/td\u003e\n\u003ctd\u003e2.5mm\u003c\/td\u003e\n\u003ctd\u003e125.142\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e125.142-3\u003c\/td\u003e\n\u003ctd\u003e3mm\u003c\/td\u003e\n\u003ctd\u003e125.142 \u0026amp; 125.138\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e125.142-3.5\u003c\/td\u003e\n\u003ctd\u003e3.5mm\u003c\/td\u003e\n\u003ctd\u003e125.142\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Otto Frei","offers":[{"title":"2mm","offer_id":47551695356118,"sku":"125.142-2","price":10.0,"currency_code":"USD","in_stock":true},{"title":"2.5mm","offer_id":47551695388886,"sku":"125.142-2.5","price":10.0,"currency_code":"USD","in_stock":true},{"title":"3mm","offer_id":47551695454422,"sku":"125.142-3","price":10.0,"currency_code":"USD","in_stock":true},{"title":"3.5mm","offer_id":47551695421654,"sku":"125.142-3.5","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/replacement-punch-only-for-italian-disk-cutters-otto-frei.jpg?v=1719958929"},{"product_id":"fretz-ma-series-large-mushroom-anvils-420-stainless-4-dome-profiles","title":"Fretz MA Large Mushroom Anvils","description":"\u003cp\u003eThe Fretz MA-Series Large Mushroom Anvils are round mushroom stakes approximately 70mm (2¾\") in diameter, crafted from 420 hardened stainless steel. Each stake in the four-piece series features a tapered tang designed to fit the Fretz H-101 Bench Holder (\u003cstrong\u003e112.720\u003c\/strong\u003e) or the Fretz VH-101 Vise Holder (\u003cstrong\u003e112.721\u003c\/strong\u003e). These are rugged, professional-grade forming tools built to handle everything from light finishing work to heavy forging with substantial hammers.\u003c\/p\u003e\u003cp\u003eThe MA-Series is engineered for forming and forging non-ferrous metals and jewelry. Each stake offers a distinct surface profile, making them highly versatile across a wide range of metalsmithing and hollowware applications. Whether you are shaping large pendants, raising forms, forging heavy wire stock, or adding dimensional curves to sheet metal, there is an MA stake suited to the task.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMA-1 – Flat:\u003c\/strong\u003e The flat-top version of the MA-Series functions as a flat jewelry anvil or as a stake for forming the bottom of hollowware. It is an excellent first stake for forging heavy stock metal wire or ingots.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMA-2 – Low Dome:\u003c\/strong\u003e The low domed surface is ideal for forming large pendants and adding subtle dimensional stability to smaller projects. Slightly domed shapes are less prone to bending in use than flat surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMA-3 – Medium Dome:\u003c\/strong\u003e A more pronounced dome than the MA-2, this stake is used when greater curvature is needed. It can also be used as a mallet: lay sheet metal on a sandbag, strike it with the domed surface while holding the tang, and the metal will become cupped in just a few blows. Metal can then be forged or textured with various hammers using the holder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMA-4 – High Dome (Half Round):\u003c\/strong\u003e The half-round domed profile produces dramatic curves on large surfaces. Small round or free-form shapes can be raised on the surface using a nylon or steel raising hammer — a technique more efficient than angle raising.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRound mushroom stake profile, approximately 70mm (2¾\") diameter\u003c\/li\u003e\n\u003cli\u003eConstructed from 420 hardened stainless steel\u003c\/li\u003e\n\u003cli\u003eTapered tang fits Fretz H-101 Bench Holder and Fretz VH-101 Vise Holder\u003c\/li\u003e\n\u003cli\u003eFour distinct dome profiles to suit a wide range of forming applications\u003c\/li\u003e\n\u003cli\u003eSuitable for use with light or very heavy hammers\u003c\/li\u003e\n\u003cli\u003eDesigned for forming and forging non-ferrous metals and jewelry\u003c\/li\u003e\n\u003cli\u003eMA-3 can be used as a mallet for cupping sheet metal on a sandbag\u003c\/li\u003e\n\u003cli\u003eMA-4 enables efficient raising without angle-raising techniques\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003eApproximately 70mm (2¾\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e420 hardened stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTang Style\u003c\/th\u003e\n\u003ctd\u003eTapered, fits Fretz H-101 and VH-101 holders\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eFretz MA-Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003ctd\u003eForming and forging non-ferrous metals and jewelry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eAvailable Options\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eDome Profile\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e112.646\u003c\/td\u003e\n\u003ctd\u003eMA-1\u003c\/td\u003e\n\u003ctd\u003eFlat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e112.647\u003c\/td\u003e\n\u003ctd\u003eMA-2\u003c\/td\u003e\n\u003ctd\u003eLow Dome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e112.648\u003c\/td\u003e\n\u003ctd\u003eMA-3\u003c\/td\u003e\n\u003ctd\u003eMedium Dome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e112.649\u003c\/td\u003e\n\u003ctd\u003eMA-4\u003c\/td\u003e\n\u003ctd\u003eHigh Dome (Half Round)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Fretz","offers":[{"title":"MA-1 Flat","offer_id":43578487046358,"sku":"112.646","price":107.0,"currency_code":"USD","in_stock":true},{"title":"MA-2 Low Dome","offer_id":43578487079126,"sku":"112.647","price":107.0,"currency_code":"USD","in_stock":true},{"title":"MA-3 Medium Dome","offer_id":43578487111894,"sku":"112.648","price":107.0,"currency_code":"USD","in_stock":true},{"title":"MA-4 High Dome","offer_id":43578487144662,"sku":"112.649","price":107.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/fretz-ma-large-mushroom-anvils-otto-frei-1.jpg?v=1719958865"},{"product_id":"euro-tool-cold-connection-metal-hole-punching-sets","title":"Euro Tool Cold Connection Metal Hole Punching Sets","description":"\u003cp\u003eThese hole punch sets from Euro Tool are designed for making clean, precise cold connections in soft metals. The heat-treated punches use a screw action mechanism that creates accurate holes without deforming the metal, working with soft metals up to 22 gauge in thickness. An adjustable guide plate attaches to the bottom of the punch, allowing you to produce multiple pieces with holes positioned at exactly the same location on each piece—ideal for consistent, repeatable results in production work.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHeat-treated punches for durability and consistent performance\u003c\/li\u003e\n\u003cli\u003eScrew action design creates clean holes without deforming the metal\u003c\/li\u003e\n\u003cli\u003eWorks with soft metals up to 22 gauge in thickness\u003c\/li\u003e\n\u003cli\u003eAdjustable guide plate attaches to the bottom of the punch for repeatable hole placement\u003c\/li\u003e\n\u003cli\u003eIdeal for cold connection jewelry work\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Metal Thickness\u003c\/th\u003e\n\u003ctd\u003eUp to 22 gauge (soft metals)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMechanism\u003c\/th\u003e\n\u003ctd\u003eScrew action\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePunch Construction\u003c\/th\u003e\n\u003ctd\u003eHeat-treated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eAvailable Options\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eSet Type\u003c\/th\u003e\n\u003cth\u003eHole Sizes\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e146.733\u003c\/td\u003e\n\u003ctd\u003eInch Size – 3 Hole Punch Set\u003c\/td\u003e\n\u003ctd\u003e1\/16\" (1.6mm), 3\/32\" (2.4mm), 1\/8\" (3.17mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e146.734\u003c\/td\u003e\n\u003ctd\u003eGauge Size – 4 Hole Punch Set\u003c\/td\u003e\n\u003ctd\u003e18 ga (1.1mm), 16 ga (1.4mm), 14 ga (1.7mm), 12 ga (2.15mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Eurotool","offers":[{"title":"3 Hole Punch","offer_id":43578718617814,"sku":"146.733","price":48.95,"currency_code":"USD","in_stock":true},{"title":"4 Hole Punch","offer_id":43578718650582,"sku":"146.734","price":60.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/euro-tool-cold-connection-metal-hole-punching-sets-otto-frei.jpg?v=1719958824"},{"product_id":"eid-longhi-no-slip-anticlastic-forming-stakes-delrin-4-sizes","title":"Eid\/Longhi No-Slip Anticlastic Forming Stakes","description":"\u003cp\u003eEid\/Longhi No-Slip Anticlastic Forming Stakes are precision-crafted from tough Acetal Resin (Delrin), a material known for its excellent tensile strength, stiffness, and good impact resistance — making it an ideal choice for anticlastic forming work. The Eid\/Longhi design addresses a common frustration in the studio: stakes that tip in the vise during hammering. These stakes include steel cross pins and washers that firmly fix the stake in your vise, keeping it stable and secure throughout your work.\u003c\/p\u003e\u003cp\u003eThe mounting system is straightforward and practical. If a bolt interferes with a particular forming movement, you can remove that bolt and still maintain solid stability from the remaining hardware. Replacement bolts, washers, and wing nuts are inexpensive and easy to source, keeping long-term costs low. The stakes are reversible, giving you a wide selection of profiles from a single stake per size. Each stake ships with a set of instructions and basic tips on anticlastic forming technique.\u003c\/p\u003e\u003cp\u003eMade in California, USA.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eConstructed from Acetal Resin (Delrin) with excellent tensile strength, stiffness, and impact resistance\u003c\/li\u003e\n\u003cli\u003eSteel cross pins and washers secure the stake firmly in a vise to prevent tipping during hammering\u003c\/li\u003e\n\u003cli\u003eReversible design provides multiple forming profiles per stake\u003c\/li\u003e\n\u003cli\u003eIndividual bolts can be removed if they interfere with your work while retaining overall stability\u003c\/li\u003e\n\u003cli\u003eReplacement hardware (bolts, washers, wing nuts) is inexpensive and readily available\u003c\/li\u003e\n\u003cli\u003eIncludes instructions and basic anticlastic forming tips\u003c\/li\u003e\n\u003cli\u003eMade in California, USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAcetal Resin (Delrin)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHardware\u003c\/th\u003e\n\u003ctd\u003eSteel cross pins and washers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eMade in California, USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncludes\u003c\/th\u003e\n\u003ctd\u003eInstructions and basic anticlastic forming tips\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eAvailable Options\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e112.895\u003c\/td\u003e\n\u003ctd\u003e7 in.\u003c\/td\u003e\n\u003ctd\u003e3\/8 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e112.896\u003c\/td\u003e\n\u003ctd\u003e10 in.\u003c\/td\u003e\n\u003ctd\u003e5\/8 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e112.897\u003c\/td\u003e\n\u003ctd\u003e11 in.\u003c\/td\u003e\n\u003ctd\u003e1 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e112.898\u003c\/td\u003e\n\u003ctd\u003e12 in.\u003c\/td\u003e\n\u003ctd\u003e1-1\/2 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 anticlastic forming stake (Delrin)\u003c\/li\u003e\n\u003cli\u003eSteel cross pins and washers\u003c\/li\u003e\n\u003cli\u003eWing nuts\u003c\/li\u003e\n\u003cli\u003eInstructions and basic anticlastic forming tips\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Otto Frei","offers":[{"title":"7\" Length - 3\/8\" Thick","offer_id":47551709085910,"sku":"112.895","price":64.0,"currency_code":"USD","in_stock":true},{"title":"10\" Length - 5\/8\" Thick","offer_id":47551709118678,"sku":"112.896","price":85.0,"currency_code":"USD","in_stock":true},{"title":"11\" Length - 1\" Thick","offer_id":47551709151446,"sku":"112.897","price":95.0,"currency_code":"USD","in_stock":false},{"title":"12\" Length - 1 1\/2\" Thick","offer_id":47551709184214,"sku":"112.898","price":129.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/eidlonghi-no-slip-anticlastic-forming-stakes-otto-frei.jpg?v=1719958783"},{"product_id":"texturing-hammers-double-sided-no1-no2-no3","title":"Texturing Hammers : No.1, No.2 \u0026 No.3","description":"\u003cp\u003eThese double-sided texturing hammers are designed for use with non-ferrous metals — copper, brass, silver, and gold — to create attractive surface patterns that give metalwork a professional finish. Each hammer features two distinct texturing faces, allowing jewelers and metalsmiths to produce a variety of decorative effects with a single tool. The more the hammer is used, the more refined and interesting the patterns become.\u003c\/p\u003e\u003cp\u003eTo use, place sheet metal on a flat metal block or anvil and strike sharply. Three hammer styles are available, each offering a unique combination of textures.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDouble-sided design — each hammer has 2 different texturing faces\u003c\/li\u003e\n\u003cli\u003eSuitable for non-ferrous metals including copper, brass, silver, and gold\u003c\/li\u003e\n\u003cli\u003eRockwell hardness of 48 for consistent, durable performance\u003c\/li\u003e\n\u003cli\u003ePatterns develop and improve with continued use\u003c\/li\u003e\n\u003cli\u003eNo. 1 and No. 2 hammers feature 1-1\/8\" round faces; 10\" total length\u003c\/li\u003e\n\u003cli\u003eNo. 3 hammer features a rectangular 1\" x 3\/8\" face; 10\" total length\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eTotal Length\u003c\/th\u003e\n\u003ctd\u003e10\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRockwell Hardness\u003c\/th\u003e\n\u003ctd\u003e48\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Metals\u003c\/th\u003e\n\u003ctd\u003eCopper, brass, silver, gold (non-ferrous)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSides per Hammer\u003c\/th\u003e\n\u003ctd\u003e2 (double-sided)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eAvailable Options\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eTexture Number\u003c\/th\u003e\n\u003cth\u003eFace Shape\u003c\/th\u003e\n\u003cth\u003eTextures\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e137.141\u003c\/td\u003e\n\u003ctd\u003eNo. 1\u003c\/td\u003e\n\u003ctd\u003eRound – 1-1\/8\"\u003c\/td\u003e\n\u003ctd\u003eChecker \u0026amp; Wide Pinstripe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e137.142\u003c\/td\u003e\n\u003ctd\u003eNo. 2\u003c\/td\u003e\n\u003ctd\u003eRound – 1-1\/8\"\u003c\/td\u003e\n\u003ctd\u003eDimple \u0026amp; Narrow Pinstripe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e137.143\u003c\/td\u003e\n\u003ctd\u003eNo. 3\u003c\/td\u003e\n\u003ctd\u003eRectangular – 1\" x 3\/8\"\u003c\/td\u003e\n\u003ctd\u003eStars \u0026amp; Crosshatch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Value Line","offers":[{"title":"Texture Number 1","offer_id":43579001143510,"sku":"137.141","price":16.95,"currency_code":"USD","in_stock":true},{"title":"Texture Number 2","offer_id":43579001176278,"sku":"137.142","price":16.95,"currency_code":"USD","in_stock":true},{"title":"Texture Number 3","offer_id":43579001209046,"sku":"137.143","price":16.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/texturing-hammers-no-1-no-2-and-no-3-otto-frei.jpg?v=1719958719"},{"product_id":"fretz-bench-anvils-420-stainless-padauk-4-shapes","title":"Fretz Bench Anvils-By The Piece","description":"\u003cp\u003eFretz Bench Anvils combine outstanding design with premium materials and craftsmanship. Each anvil is crafted from highly polished cast 420 stainless steel and mounted on a beautifully finished round of Padauk hardwood — built for a lifetime of shaping and forming metal.\u003c\/p\u003e\u003cp\u003eThe Padauk hardwood bases feature rubber feet that keep each anvil stable and in place on your bench while adding cushioning during use. Whether you are raising, doming, or forming sheet metal, these anvils deliver professional performance and a refined presence on any jeweler's bench.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHighly polished cast 420 stainless steel working surface\u003c\/li\u003e\n\u003cli\u003eMounted on a beautifully finished Padauk hardwood base\u003c\/li\u003e\n\u003cli\u003eRubber feet for stability and cushioning during use\u003c\/li\u003e\n\u003cli\u003eAvailable in four distinct top shapes to suit a variety of forming tasks\u003c\/li\u003e\n\u003cli\u003eBuilt for lasting professional use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAnvil Diameter\u003c\/th\u003e\n\u003ctd\u003e2-3\/4\" (70 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e420 stainless steel (polished cast)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase Material\u003c\/th\u003e\n\u003ctd\u003ePadauk hardwood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase Feet\u003c\/th\u003e\n\u003ctd\u003eRubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold As\u003c\/th\u003e\n\u003ctd\u003eBy the piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eAvailable Options\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eShape\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e112.602\u003c\/td\u003e\n\u003ctd\u003eBA-1 Flat Top, Slight Rounded Edges\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e112.603\u003c\/td\u003e\n\u003ctd\u003eBA-2 Low Dome, Rounded Edges\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e112.604\u003c\/td\u003e\n\u003ctd\u003eBA-3 Medium Domed, Mushroom Top\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e112.605\u003c\/td\u003e\n\u003ctd\u003eBA-4 High Dome Top\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Fretz","offers":[{"title":"BA-1 Flat Top Slight Rounded Edges","offer_id":43579001241814,"sku":"112.602","price":97.0,"currency_code":"USD","in_stock":true},{"title":"BA-2 Low Dome Rounded Edges","offer_id":43579001274582,"sku":"112.603","price":97.0,"currency_code":"USD","in_stock":true},{"title":"BA-3 Medium Domed Mushroom Top","offer_id":43579001307350,"sku":"112.604","price":97.0,"currency_code":"USD","in_stock":true},{"title":"BA-4 High Dome Top","offer_id":43579001340118,"sku":"112.605","price":97.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/112.602NEW_zoom1.jpg?v=1775511608"},{"product_id":"fretz-michael-good-hook-stakes-420-stainless-synclastic-anticlastic","title":"Fretz - Michael Good Hook Stakes","description":"\u003cp\u003e\u003cstrong\u003eFretz Michael Good Hook Stakes\u003c\/strong\u003e are precision-crafted forming tools designed for synclastic and anticlastic metalsmithing techniques. Developed through a collaboration between renowned tool maker Bill Fretz and award-winning jewelry designer and metalsmith Michael Good, these stakes bring professional-grade forming capability to any studio. The techniques they support were first pioneered by visionary metalsmith Heikki Seppa, and until this collaboration, tools of this caliber were largely unavailable commercially.\u003c\/p\u003e\u003cp\u003eEach stake is cast in 420 stainless steel, expertly hand polished, and hardened to 50C on the Rockwell scale—built to Michael Good's exacting specifications by the Fretz factory. Available individually or as a complete set of six stakes with the stake holder, these tools enable jewelers and metalsmiths to create the flowing, three-dimensional forms that define synclastic and anticlastic jewelry design.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDesigned for synclastic and anticlastic metal forming techniques\u003c\/li\u003e\n\u003cli\u003eDeveloped in collaboration with metalsmith and designer Michael Good\u003c\/li\u003e\n\u003cli\u003eCast in 420 stainless steel for durability and precision\u003c\/li\u003e\n\u003cli\u003eExpertly hand polished after casting\u003c\/li\u003e\n\u003cli\u003eHardened to 50C on the Rockwell scale\u003c\/li\u003e\n\u003cli\u003eAvailable individually or as a complete set with stake holder\u003c\/li\u003e\n\u003cli\u003eSix stake profiles spanning 4mm to 16mm working surfaces at varying angles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e420 stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHardness\u003c\/th\u003e\n\u003ctd\u003e50C Rockwell\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHand polished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eVietnam (Fretz factory)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003ctd\u003eSynclastic and anticlastic metal forming\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eAvailable Options\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003cth\u003eSize \/ Angle\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e112.760\u003c\/td\u003e\n\u003ctd\u003eStake Holder\u003c\/td\u003e\n\u003ctd\u003e85mm x 78mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e112.761\u003c\/td\u003e\n\u003ctd\u003eG1 Stake\u003c\/td\u003e\n\u003ctd\u003e16mm \/ 120 Degree\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e112.762\u003c\/td\u003e\n\u003ctd\u003eG2 Stake\u003c\/td\u003e\n\u003ctd\u003e16mm \/ 90 Degree\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e112.763\u003c\/td\u003e\n\u003ctd\u003eG3 Stake\u003c\/td\u003e\n\u003ctd\u003e12mm \/ 90 Degree\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e112.764\u003c\/td\u003e\n\u003ctd\u003eG4 Stake\u003c\/td\u003e\n\u003ctd\u003e8mm \/ 90 Degree\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e112.765\u003c\/td\u003e\n\u003ctd\u003eG5 Stake\u003c\/td\u003e\n\u003ctd\u003e6mm \/ 90 Degree\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e112.766\u003c\/td\u003e\n\u003ctd\u003eG6 Stake\u003c\/td\u003e\n\u003ctd\u003e4mm \/ 90 Degree\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Fretz","offers":[{"title":"Stake Holder","offer_id":43579042332886,"sku":"112.760","price":102.95,"currency_code":"USD","in_stock":true},{"title":"G1 Stake","offer_id":43579042365654,"sku":"112.761","price":113.95,"currency_code":"USD","in_stock":false},{"title":"G2 Stake","offer_id":43579042398422,"sku":"112.762","price":113.95,"currency_code":"USD","in_stock":true},{"title":"G3 Stake","offer_id":43579042431190,"sku":"112.763","price":92.95,"currency_code":"USD","in_stock":true},{"title":"G4 Stake","offer_id":43579042463958,"sku":"112.764","price":92.95,"currency_code":"USD","in_stock":true},{"title":"G5 Stake","offer_id":43579042496726,"sku":"112.765","price":92.95,"currency_code":"USD","in_stock":true},{"title":"G6 Stake","offer_id":43579042529494,"sku":"112.766","price":92.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/fretz-michael-good-hook-stakes-otto-frei.jpg?v=1719958711"},{"product_id":"modern-texturing-hammers-no1-no2-no3","title":"Modern Texturing Hammers: No.1, No. 2 \u0026 No. 3","description":"\u003cp\u003eThese Modern Texturing Hammers are designed for texturing non-ferrous metals including copper, brass, silver, and gold. Each hammer features two distinct texturing faces in a contemporary style pattern, giving jewelers and metalsmiths versatile options in a single tool. The hammers are finished with an attractive frosted surface, and the heads are firmly secured to the smooth, well-proportioned handles using both wedge and glue construction to prevent loosening during use.\u003c\/p\u003e\n\u003cp\u003eAvailable in three texture variations, each sold individually—or purchase all three together in a money-saving set.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwo different texturing faces per hammer for versatile surface design\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eModern\u003c\/em\u003e style pattern heads for contemporary texturing results\u003c\/li\u003e\n\u003cli\u003eFrosted finish for an attractive, professional appearance\u003c\/li\u003e\n\u003cli\u003eHeads secured with wedge and glue construction to prevent loosening during use\u003c\/li\u003e\n\u003cli\u003eSmooth, well-proportioned handles for comfortable use\u003c\/li\u003e\n\u003cli\u003eSuitable for texturing non-ferrous metals: copper, brass, silver, and gold\u003c\/li\u003e\n\u003cli\u003eAvailable individually or as a set of three\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Metals\u003c\/th\u003e\n\u003ctd\u003eCopper, brass, silver, gold (non-ferrous)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eFrosted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead Attachment\u003c\/th\u003e\n\u003ctd\u003eWedge and glue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003ePakistan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eAvailable Options\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eTexture Number\u003c\/th\u003e\n\u003cth\u003eFace Patterns\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e137.135\u003c\/td\u003e\n\u003ctd\u003eNo. 1\u003c\/td\u003e\n\u003ctd\u003eThin Circles or Speckles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e137.136\u003c\/td\u003e\n\u003ctd\u003eNo. 2\u003c\/td\u003e\n\u003ctd\u003eWide Circles or Dots\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e137.137\u003c\/td\u003e\n\u003ctd\u003eNo. 3\u003c\/td\u003e\n\u003ctd\u003eStripes or Weave\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Value Line","offers":[{"title":"Texture Number 1","offer_id":43579042595030,"sku":"137.135","price":18.95,"currency_code":"USD","in_stock":false},{"title":"Texture Number 2","offer_id":43579042627798,"sku":"137.136","price":18.95,"currency_code":"USD","in_stock":true},{"title":"Texture Number 3","offer_id":43579042660566,"sku":"137.137","price":18.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/modern-texturing-hammers-no-1-no-2-and-no-3-otto-frei.jpg?v=1719958710"},{"product_id":"ez-rivet-piercing-setting-tools-1-16-3-32","title":"EZ Rivet Piercing \u0026 Setting Tools","description":"\u003cp\u003eThe EZ Rivet Piercing \u0026amp; Setting Tools are purpose-built for jewelers and metalsmiths who need precise, repeatable rivet work at the bench. Designed for clean piercing and controlled flaring, these tools streamline the riveting process for tube, wire, and flat stock applications. The complete kit option (148.400) includes the setting tool paired with the 1\/16\" piercing and flaring punch kit, giving you everything needed to begin riveting right away. Because the piercing and flaring punches are consumable components subject to wear with regular use, replacement punch kits are available separately in both 1\/16\" and 3\/32\" sizes, so you can keep your setup running without replacing the entire tool.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for precise piercing and flaring in rivet setting applications\u003c\/li\u003e\n  \u003cli\u003eComplete kit option (148.400) includes the 1\/16\" EZ Rivet Setting Tool with matching piercing and flaring punch kit\u003c\/li\u003e\n  \u003cli\u003eReplacement punch kits sold separately to extend tool life without full replacement\u003c\/li\u003e\n  \u003cli\u003eAvailable in two punch sizes: 1\/16\" and 3\/32\" to suit different rivet dimensions\u003c\/li\u003e\n  \u003cli\u003ePunch kits are interchangeable replacement components for ongoing bench use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAvailable Options\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n    \u003cth\u003ePart #\u003c\/th\u003e\n    \u003cth\u003eDescription\u003c\/th\u003e\n    \u003cth\u003eSize\u003c\/th\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003e148.400\u003c\/td\u003e\n    \u003ctd\u003eEZ Rivet Piercing \u0026amp; Setting Tool with Piercing \u0026amp; Flaring Punch Kit\u003c\/td\u003e\n    \u003ctd\u003e1\/16\"\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003e148.401\u003c\/td\u003e\n    \u003ctd\u003ePiercing \u0026amp; Flaring Punch Kit Only\u003c\/td\u003e\n    \u003ctd\u003e1\/16\"\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003e148.402\u003c\/td\u003e\n    \u003ctd\u003ePiercing \u0026amp; Flaring Punch Kit Only\u003c\/td\u003e\n    \u003ctd\u003e3\/32\"\u003c\/td\u003e\n  \u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eThe piercing and flaring punches are subject to wear with regular use. Replacement kits are available in 1\/16\" (148.401) and 3\/32\" (148.402) to maintain your tool without purchasing a complete new setup.\u003c\/p\u003e","brand":"Otto Frei","offers":[{"title":"1\/16\" Piercing \u0026 Setting Tool","offer_id":43579042726102,"sku":"148.400","price":44.8,"currency_code":"USD","in_stock":true},{"title":"1\/16\" Piercing \u0026 Flaring Kit","offer_id":43579042758870,"sku":"148.401","price":20.75,"currency_code":"USD","in_stock":true},{"title":"3\/32\" Piercing \u0026 Flaring Kit","offer_id":43579042791638,"sku":"148.402","price":20.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/ez-rivet-piercing-and-setting-tools-otto-frei.jpg?v=1719958711"},{"product_id":"profiform-round-hole-punches-3-10mm","title":"Profiform Round Hole Punches","description":"\u003cp\u003eProfiform Round Hole Punches deliver high-precision hole punching in a range of round sizes for use with the Profiform 200 or 320 systems. Each punch is sold individually and includes everything needed for a complete punching operation — a hardened and ground punch, a hardened and ground die, and a stripper pad matched to the shape of the punch. Punches may be purchased separately or as part of a complete set with either the Profiform 200 or 320. When purchasing separately, the punch holder (Part No. 153.430) is required.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-precision hardened and ground punch for clean, accurate holes\u003c\/li\u003e\n\u003cli\u003eIncludes matching hardened and ground die\u003c\/li\u003e\n\u003cli\u003eIncludes stripper pad matched to the punch shape\u003c\/li\u003e\n\u003cli\u003eCompatible with the Profiform 200 and Profiform 320 systems\u003c\/li\u003e\n\u003cli\u003eAvailable in six round sizes: 3.0mm – 10.0mm\u003c\/li\u003e\n\u003cli\u003eCan be purchased individually or as part of a complete set\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eShape\u003c\/th\u003e\n\u003ctd\u003eRound\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePunch Construction\u003c\/th\u003e\n\u003ctd\u003eHardened and ground\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDie Construction\u003c\/th\u003e\n\u003ctd\u003eHardened and ground\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncludes\u003c\/th\u003e\n\u003ctd\u003ePunch, die, and stripper pad\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Systems\u003c\/th\u003e\n\u003ctd\u003eProfiform 200, Profiform 320\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePunch Holder Required (sold separately)\u003c\/th\u003e\n\u003ctd\u003ePart No. 153.430\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eAvailable Options\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.403\u003c\/td\u003e\n\u003ctd\u003e3.0mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.404\u003c\/td\u003e\n\u003ctd\u003e4.0mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.405\u003c\/td\u003e\n\u003ctd\u003e5.0mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.406\u003c\/td\u003e\n\u003ctd\u003e6.0mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.408\u003c\/td\u003e\n\u003ctd\u003e8.0mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.410\u003c\/td\u003e\n\u003ctd\u003e10.0mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOne hardened and ground punch (selected size)\u003c\/li\u003e\n\u003cli\u003eOne hardened and ground die\u003c\/li\u003e\n\u003cli\u003eOne stripper pad matched to punch shape\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eThe punch holder (Part No. 153.430) is \u003cstrong\u003enot included\u003c\/strong\u003e and must be purchased separately when buying punches individually. These punches are designed for use with the Profiform 200 and Profiform 320 systems only.\u003c\/p\u003e","brand":"Profiform","offers":[{"title":"3.0mm","offer_id":47551710232790,"sku":"153.403","price":139.0,"currency_code":"USD","in_stock":true},{"title":"4.0mm","offer_id":47551710265558,"sku":"153.404","price":139.0,"currency_code":"USD","in_stock":true},{"title":"5.0mm","offer_id":47551710298326,"sku":"153.405","price":139.0,"currency_code":"USD","in_stock":true},{"title":"6.0mm","offer_id":47551710331094,"sku":"153.406","price":139.0,"currency_code":"USD","in_stock":true},{"title":"8.0mm","offer_id":47551710363862,"sku":"153.408","price":139.0,"currency_code":"USD","in_stock":true},{"title":"10.0mm","offer_id":47551710396630,"sku":"153.410","price":139.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/profiform-round-hole-punches-otto-frei.jpg?v=1719958691"},{"product_id":"profiform-square-rectangle-hole-punches-4mm-12mm","title":"Profiform Square \u0026 Rectangle Hole Punches","description":"\u003cp\u003eProfiform Square \u0026amp; Rectangle Hole Punches deliver high-precision punching performance for jewelers and metalsmiths working with the Profiform 200 or 320 systems. Available in five square sizes and one rectangular size, these punches are engineered to produce clean, accurate openings in sheet metal with consistent results across every use.\u003c\/p\u003e\u003cp\u003eEach punch set includes a hardened and ground punch, a hardened and ground die, and a stripper pad matched to the shape of the punch — everything needed for precise, repeatable hole punching. Punches may be used as part of a complete Profiform system or purchased separately. \u003cstrong\u003eNote:\u003c\/strong\u003e When purchasing separately, punch holder Part No. 153.430 must also be acquired.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHigh-precision hardened and ground punch for accurate, clean results\u003c\/li\u003e\n\u003cli\u003eMatching hardened and ground die included with each set\u003c\/li\u003e\n\u003cli\u003eStripper pad matched to punch shape included\u003c\/li\u003e\n\u003cli\u003eAvailable in five square sizes and one rectangular size\u003c\/li\u003e\n\u003cli\u003eCompatible with the Profiform 200 and Profiform 320 systems\u003c\/li\u003e\n\u003cli\u003eCan be purchased individually or as part of a complete Profiform set\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePunch Construction\u003c\/th\u003e\n\u003ctd\u003eHardened and ground punch and die\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncluded Components\u003c\/th\u003e\n\u003ctd\u003ePunch, die, and matched stripper pad\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Systems\u003c\/th\u003e\n\u003ctd\u003eProfiform 200, Profiform 320\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeparate Purchase Required\u003c\/th\u003e\n\u003ctd\u003ePunch holder Part No. 153.430 (when buying separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eAvailable Options\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eShape\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.414\u003c\/td\u003e\n\u003ctd\u003e4 mm x 4 mm\u003c\/td\u003e\n\u003ctd\u003eSquare\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.416\u003c\/td\u003e\n\u003ctd\u003e6 mm x 6 mm\u003c\/td\u003e\n\u003ctd\u003eSquare\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.418\u003c\/td\u003e\n\u003ctd\u003e8 mm x 8 mm\u003c\/td\u003e\n\u003ctd\u003eSquare\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.420\u003c\/td\u003e\n\u003ctd\u003e10 mm x 10 mm\u003c\/td\u003e\n\u003ctd\u003eSquare\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.422\u003c\/td\u003e\n\u003ctd\u003e12 mm x 12 mm\u003c\/td\u003e\n\u003ctd\u003eSquare\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.424\u003c\/td\u003e\n\u003ctd\u003e4 mm x 20 mm\u003c\/td\u003e\n\u003ctd\u003eRectangle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHardened and ground punch\u003c\/li\u003e\n\u003cli\u003eHardened and ground die\u003c\/li\u003e\n\u003cli\u003eStripper pad matched to punch shape\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eNotes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePunch holder Part No. 153.430 must be purchased separately if not using a complete Profiform system.\u003c\/li\u003e\n\u003cli\u003eThese punches are also available as part of a complete set with the Profiform 200 or Profiform 320.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Profiform","offers":[{"title":"4mm x 4mm","offer_id":47551710560470,"sku":"153.414","price":169.0,"currency_code":"USD","in_stock":true},{"title":"6mm x 6mm","offer_id":47551710593238,"sku":"153.416","price":169.0,"currency_code":"USD","in_stock":true},{"title":"8mm x 8mm","offer_id":47551710626006,"sku":"153.418","price":169.0,"currency_code":"USD","in_stock":false},{"title":"10mm x 10mm","offer_id":47551710658774,"sku":"153.420","price":169.0,"currency_code":"USD","in_stock":false},{"title":"12mm x 12mm","offer_id":47551710691542,"sku":"153.422","price":169.0,"currency_code":"USD","in_stock":true},{"title":"4mm x 20mm","offer_id":47551710724310,"sku":"153.424","price":169.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/profiform-square-and-rectangle-hole-punches-otto-frei.jpg?v=1719958690"},{"product_id":"profiform-shear-stops-200-320","title":"Profiform Shear Stops","description":"\u003cp\u003eShear stops for the Profiform 200 and 320 provide precise depth control during shearing operations. Choose from a Basic stop that mounts on one side of either machine or Double Sided stops that span the full length of the Profiform 200 or 320 for more advanced cutting applications.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eBasic stop\u003c\/strong\u003e mounts on one side of either the Profiform 200 or 320 and serves as a depth stop while shearing. The \u003cstrong\u003eDouble Sided stops\u003c\/strong\u003e mount on both sides of the machine and cover its full length, enabling you to cut parallel parts as well as tapered parts between 0 and 15 degrees.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBasic model compatible with both Profiform 200 and 320\u003c\/li\u003e\n\u003cli\u003eDouble Sided models available separately for Profiform 200 and Profiform 320\u003c\/li\u003e\n\u003cli\u003eBasic stop mounts on one side for use as a depth stop during shearing\u003c\/li\u003e\n\u003cli\u003eDouble Sided stops mount on both sides and cover the full length of the machine\u003c\/li\u003e\n\u003cli\u003eDouble Sided stops support cutting of parallel parts and tapered parts up to 15 degrees\u003c\/li\u003e\n\u003cli\u003eAll models adjustable from 0–95 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAdjustment Range\u003c\/th\u003e\n\u003ctd\u003e0–95 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Machines\u003c\/th\u003e\n\u003ctd\u003eProfiform 200, Profiform 320\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eAvailable Options\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003cth\u003eCompatible Machine(s)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.425\u003c\/td\u003e\n\u003ctd\u003eBasic\u003c\/td\u003e\n\u003ctd\u003eProfiform 200 or 320\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.444\u003c\/td\u003e\n\u003ctd\u003eDouble Sided\u003c\/td\u003e\n\u003ctd\u003eProfiform 200\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.445\u003c\/td\u003e\n\u003ctd\u003eDouble Sided\u003c\/td\u003e\n\u003ctd\u003eProfiform 320\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Profiform","offers":[{"title":"Basic (for 200 or 300)","offer_id":43579147976918,"sku":"153.425","price":68.0,"currency_code":"USD","in_stock":false},{"title":"Double Sided (for 200)","offer_id":43579148009686,"sku":"153.444","price":160.0,"currency_code":"USD","in_stock":false},{"title":"Double Sided (for 300)","offer_id":43579148042454,"sku":"153.445","price":165.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/profiform-shear-stops-otto-frei.jpg?v=1719958691"},{"product_id":"profiform-louver-rib-forming-tools-200-320","title":"Profiform Louvers \u0026 Rib Forming Tools","description":"\u003cp\u003eExpand the capabilities of your Profiform 200 or Profiform 320 sheet metal forming machine with these specialized louver and rib forming tools. Designed for precision fabrication, these tools allow metalsmiths and metalworkers to create clean, consistent louvers and reinforcement ribs directly in sheet metal. The \u003cstrong\u003eHolder for Forming Tool (153.432)\u003c\/strong\u003e is required to use any of the louver or groove forming tools listed below, and it also accepts custom \"do-it-yourself\" tools for use on compatible Profiform machines.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSpecialized forming tools engineered for use with Profiform 200 and Profiform 320 machines\u003c\/li\u003e\n\u003cli\u003eProduces precise louvers and reinforcement ribs in sheet metal\u003c\/li\u003e\n\u003cli\u003eTool holder (153.432) required for all louver and rib forming tools\u003c\/li\u003e\n\u003cli\u003eTool holder also accommodates custom DIY forming tools on compatible Profiform machines\u003c\/li\u003e\n\u003cli\u003eAvailable in multiple louver widths and rib configurations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Machines\u003c\/th\u003e\n\u003ctd\u003eProfiform 200, Profiform 320\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRequired Accessory\u003c\/th\u003e\n\u003ctd\u003eHolder for Forming Tool, Part # 153.432\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLouver Length\u003c\/th\u003e\n\u003ctd\u003e35mm (all louver tools)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eAvailable Options\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.432\u003c\/td\u003e\n\u003ctd\u003eHolder for Forming Tool\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.433\u003c\/td\u003e\n\u003ctd\u003eForming Tool for Louvers\u003c\/td\u003e\n\u003ctd\u003e1.5mm × 35mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.434\u003c\/td\u003e\n\u003ctd\u003eForming Tool for Louvers\u003c\/td\u003e\n\u003ctd\u003e2.5mm × 35mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.435\u003c\/td\u003e\n\u003ctd\u003eForming Tool for Reinforcement Ribs\u003c\/td\u003e\n\u003ctd\u003e1mm × 35mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eThe Holder for Forming Tool (153.432) must be purchased separately and is required to use any of the louver or rib forming tools.\u003c\/strong\u003e These tools are designed exclusively for compatible Profiform machines and are not intended for use with other equipment.\u003c\/p\u003e","brand":"Profiform","offers":[{"title":"Holder for Forming Tool","offer_id":43579148402902,"sku":"153.432","price":146.0,"currency_code":"USD","in_stock":false},{"title":"Forming Tool 1.5x35mm Louvers","offer_id":43579148435670,"sku":"153.433","price":98.0,"currency_code":"USD","in_stock":false},{"title":"Forming Tool 2.5x35mm Louvers","offer_id":43579148468438,"sku":"153.434","price":98.0,"currency_code":"USD","in_stock":false},{"title":"Forming Tool 1x35mm Ribs","offer_id":43579148501206,"sku":"153.435","price":98.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/profiform-louvers-and-rib-forming-tools-otto-frei-2.jpg?v=1724351113"},{"product_id":"profiform-boxing-tool-sets-200-320","title":"Profiform Boxing Tool Sets","description":"\u003cp\u003eProfiform Boxing Tool Sets are designed to completely fold sheet metal 180° in two precise operations. In the first operation, the sheet metal is bent to approximately 120°; in the second operation, it is folded to a full 180°. Boxed constructions are ideal for thin sheet metal applications where reinforcement is needed or wherever a sharp edge must be avoided. Each set consists of three tools and is available in two versions to match either the Profiform 200 or Profiform 320 press brake.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFolds sheet metal to a full 180° in two sequential operations\u003c\/li\u003e\n\u003cli\u003eFirst operation bends sheet metal to approximately 120°\u003c\/li\u003e\n\u003cli\u003eSecond operation completes the fold to 180°\u003c\/li\u003e\n\u003cli\u003eIdeal for thin sheet metal reinforcement and eliminating sharp edges\u003c\/li\u003e\n\u003cli\u003eEach set includes three tools\u003c\/li\u003e\n\u003cli\u003eAvailable in versions sized for the Profiform 200 and Profiform 320\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eTools per Set\u003c\/th\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Equipment\u003c\/th\u003e\n\u003ctd\u003eProfiform 200 or Profiform 320 (sold separately, by version)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eAvailable Options\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eVersion\u003c\/th\u003e\n\u003cth\u003eFunctional Length\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.436\u003c\/td\u003e\n\u003ctd\u003eBoxing Tool Set for Profiform 200\u003c\/td\u003e\n\u003ctd\u003e200 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.437\u003c\/td\u003e\n\u003ctd\u003eBoxing Tool Set for Profiform 320\u003c\/td\u003e\n\u003ctd\u003e320 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Profiform","offers":[{"title":"Boxing Tool Set for Profiform 200","offer_id":43579148533974,"sku":"153.436","price":292.0,"currency_code":"USD","in_stock":false},{"title":"Boxing Tool Set for Profiform 320","offer_id":43579148566742,"sku":"153.437","price":330.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/profiform-boxing-tool-sets-otto-frei-1.jpg?v=1719958688"},{"product_id":"round-mini-bezel-mandrel-4-5mm-8-0mm-germany","title":"Round Mini Bezel Mandrel-4.5mm to 8.0mm-Made in Germany","description":"\u003cp\u003eThe Round Mini Bezel Mandrel is a precision-crafted steel forming tool made in Germany, designed for jewelers and metalsmiths who need reliable, consistent results when shaping small bezels and forming jump rings. Measuring 180mm (7-1\/8\") in total length, this compact mandrel tapers smoothly from 4.5mm to 8.0mm, giving you a graduated working surface that accommodates a range of small round forms. The handle features a serrated surface for a secure, confident grip during use.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTapered round profile ideal for forming small bezels and jump rings\u003c\/li\u003e\n\u003cli\u003eSmooth taper from 4.5mm to 8.0mm provides a range of working diameters\u003c\/li\u003e\n\u003cli\u003eOverall length of 180mm (7-1\/8\") for easy handling\u003c\/li\u003e\n\u003cli\u003eSerrated handle for a secure, non-slip grip\u003c\/li\u003e\n\u003cli\u003ePrecision manufactured in Germany\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e180mm (7-1\/8\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTaper Range\u003c\/th\u003e\n\u003ctd\u003e4.5mm – 8.0mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eRound\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCountry of Origin\u003c\/th\u003e\n\u003ctd\u003eGermany\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVariants\u003c\/th\u003e\n\u003ctd\u003e1 (single option)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Asic","offers":[{"title":"Default Title","offer_id":43579646673110,"sku":"143.009","price":19.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/round-mini-bezel-mandrel-4-5mm-to-8-0mm-made-in-germany-otto-frei.jpg?v=1719958520"},{"product_id":"metal-wire-bending-jig-closeout","title":"Closeout Metal Wire Bending Jig","description":"\u003cp\u003eThis metal wire bending jig bends and forms mild steel wire and strip up to 3\/16\" (4.75 mm) in diameter. Sturdy and inexpensive, it mounts directly to your bench or suitable workspace using the included wood screws, giving you a stable platform for quick, repeatable bends. Four rods are included for wrapping wire or strips into consistent shapes. Now offered at closeout pricing—a strong value for any jewelry or metalsmithing bench.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBends and forms mild steel wire and strip up to 3\/16\" (4.75 mm) in diameter\u003c\/li\u003e\n\u003cli\u003eSturdy metal construction designed for bench mounting\u003c\/li\u003e\n\u003cli\u003eTwo wood screws included for secure bench or workspace attachment\u003c\/li\u003e\n\u003cli\u003eFour rods included for wrapping wire or strip into consistent shapes\u003c\/li\u003e\n\u003cli\u003eInexpensive bench tool suited for everyday forming tasks\u003c\/li\u003e\n\u003cli\u003eNow available at closeout pricing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Wire Diameter\u003c\/th\u003e\n\u003ctd\u003e3\/16\" (4.75 mm) — mild steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting Hardware Included\u003c\/th\u003e\n\u003ctd\u003eTwo wood screws\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRods Included\u003c\/th\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePricing Status\u003c\/th\u003e\n\u003ctd\u003eCloseout\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 metal wire bending jig\u003c\/li\u003e\n\u003cli\u003e4 wrapping rods\u003c\/li\u003e\n\u003cli\u003e2 wood screws for bench mounting\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Value Line","offers":[{"title":"Default Title","offer_id":43579702083798,"sku":"143.810","price":6.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/closeout-metal-wire-bending-jig-otto-frei-1.jpg?v=1726693424"},{"product_id":"square-hardwood-forming-block-70mm","title":"Square Wood Forming Block 2-3\/4\" x 2-3\/4\"","description":"\u003cp\u003eThis hardwood forming block measures 70mm × 70mm (2-3\/4\" × 2-3\/4\") and features an assortment of shallow round depressions, half-round recesses, and grooved slots designed for forming soft metals. Modeled after traditional steel forming blocks, it provides jewelers and metalsmiths with a versatile benchtop tool for removing dents, doming, and shaping sheet metal and wire with precision and control.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eHardwood construction provides a firm yet workable forming surface\u003c\/li\u003e\n  \u003cli\u003eMultiple shallow round depressions for doming and rounding soft metals\u003c\/li\u003e\n  \u003cli\u003eHalf-round recesses for curved shaping and forming\u003c\/li\u003e\n  \u003cli\u003eGrooved slots for wire and strip metal forming\u003c\/li\u003e\n  \u003cli\u003ePatterned after steel forming blocks for familiar, reliable results\u003c\/li\u003e\n  \u003cli\u003eUseful for removing dents and shaping a variety of metal forms\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e70mm × 70mm (2-3\/4\")\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eHardwood\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eShape\u003c\/th\u003e\n\u003ctd\u003eSquare\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eVariant Count\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Value Line","offers":[{"title":"Default Title","offer_id":43579702477014,"sku":"125.1085","price":13.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/square-wood-forming-block-2-34-x-2-34-otto-frei.jpg?v=1719958500"},{"product_id":"fretz-revere-r-gf-goldsmithing-crosspein-hammer","title":"Fretz Revere R-GF Goldsmithing\/Crosspein Hammer","description":"\u003cp\u003e\u003cem\u003eFrom Alan Revere:\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003e\"This is my signature combination of two essential hammer faces. It is ideal for small forging projects. The cross peen is used to stretch metal in one direction when forging. The goldsmithing face is used for radial forging, moving metal outward in all directions, as well as planishing to remove marks left by the cross peen. Both faces can be used to produce attractive textures. There is no need to polish either end, just keep them tidy with Scotch Brite® or 220 abrasive paper. Unless this hammer is the final tool to touch the work, there is no need to polish. This hammer is required for classes at the Revere Academy of Jewelry Arts in San Francisco, California.\"\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eThe Fretz Revere R-GF Goldsmithing\/Crosspein Hammer combines two essential hammer faces into one precisely balanced tool. The head is notably compact yet surprisingly hefty, delivering confident feel and control during small forging projects. The domed goldsmithing face is shaped for precise radial forging — moving metal outward in all directions — and for planishing to remove marks left by the cross peen. The cross peen face is larger than the riveting end found on the Revere Chasing Hammer, making it well suited for raising and texturing work.\u003c\/p\u003e\u003cp\u003eThe handle is round rather than pistol-shaped, a deliberate choice for added sturdiness. Unlike the smooth, polished handles found on other Fretz hammers, the Revere handle features a distinctive, deep texture developed to Alan Revere's exact specifications — the same philosophy behind the textured Revere Pliers — providing enhanced sensitivity and grip during use.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSignature dual-face design combining a domed goldsmithing face and a cross peen face\u003c\/li\u003e\n\u003cli\u003eDomed goldsmithing face ideal for radial forging and planishing\u003c\/li\u003e\n\u003cli\u003eCross peen face sized for raising and texturing — larger than the riveting end on the Revere Chasing Hammer\u003c\/li\u003e\n\u003cli\u003eCompact yet hefty head with excellent balance in the hand\u003c\/li\u003e\n\u003cli\u003eDistinctive deep-textured round handle engineered to Alan Revere's specifications for enhanced grip sensitivity\u003c\/li\u003e\n\u003cli\u003eRound handle profile chosen over pistol grip for greater sturdiness\u003c\/li\u003e\n\u003cli\u003eRequired hammer for classes at the Revere Academy of Jewelry Arts, San Francisco, California\u003c\/li\u003e\n\u003cli\u003eFaces can be maintained with Scotch Brite® or 220 abrasive paper — no polishing required unless the hammer is the final tool to touch the work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFace Shape\u003c\/td\u003e\n\u003ctd\u003eRectangular \/ Round\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFace Sizes\u003c\/td\u003e\n\u003ctd\u003e15 x 4mm \u0026amp; 15mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall Length\u003c\/td\u003e\n\u003ctd\u003e9-1\/8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHead Length\u003c\/td\u003e\n\u003ctd\u003e77mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHead Type\u003c\/td\u003e\n\u003ctd\u003eGoldsmithing \/ Crosspein\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHead Weight\u003c\/td\u003e\n\u003ctd\u003e2.7 oz. (77g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eVietnam\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Fretz","offers":[{"title":"Default Title","offer_id":43579703460054,"sku":"137.171","price":77.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/fretz-revere-r-gf-goldsmithingcrosspein-hammer-otto-frei-1.jpg?v=1719958500"},{"product_id":"nylon-dapping-punch-set-8-piece","title":"Nylon Dapping Punch Assortment Of 8-9.3mm to 27mm","description":"\u003cp\u003eShape and dome soft metals without scratching or marring the surface with this 8-piece nylon dapping punch assortment. Spanning a practical size range of 9.3 mm to 27 mm (3\/8\" to 1-1\/16\") in diameter, this set gives jewelers and metalsmiths the variety needed to form a wide range of curved and domed shapes. The smooth nylon construction is a smart choice when working with softer metals, where steel punches might leave unwanted marks or scratches.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSet of 8 nylon dapping punches in graduated sizes\u003c\/li\u003e\n\u003cli\u003eNon-marring nylon material protects soft metal surfaces from scratches\u003c\/li\u003e\n\u003cli\u003eSmooth punch heads for clean, consistent doming results\u003c\/li\u003e\n\u003cli\u003eSize range of 9.3 mm to 27 mm covers a broad variety of forming applications\u003c\/li\u003e\n\u003cli\u003eA practical, economical assortment for jewelers and metalsmiths\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eQuantity\u003c\/th\u003e\n\u003ctd\u003e8 pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize Range\u003c\/th\u003e\n\u003ctd\u003e9.3 mm – 27 mm (3\/8\" – 1-1\/16\") diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eNylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCountry of Origin\u003c\/th\u003e\n\u003ctd\u003eIndia\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e8 nylon dapping punches ranging from 9.3 mm to 27 mm in diameter\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Value Line","offers":[{"title":"Default Title","offer_id":43579713126614,"sku":"125.1125","price":19.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/nylon-dapping-punch-assortment-of-8-9-3mm-to-27mm-otto-frei.jpg?v=1719958495"},{"product_id":"fretz-hmr-22-sandstone-texturing-hammer","title":"Fretz HMR-22 Sandstone Texturing Hammer","description":"\u003cp\u003eThe Fretz HMR-22 Sandstone Texturing Hammer delivers a distinctive crosshatch surface texture on soft metals including gold, copper, and silver. Part of the renowned Fretz Jewelers Hammers line, this hammer is sized between the smaller Fretz Precisionsmith series and the larger Fretz Silversmithing series—making it the go-to choice for a wide range of metalsmithing and jewelry-forming applications.\u003c\/p\u003e\n\n\u003cp\u003eFretz hammers are recognized for two defining qualities: the handle and the head. Together, they create a tool that is as comfortable in the hand as it is precise in use.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSandstone crosshatch texturing face\u003c\/strong\u003e produces a rich, consistent surface texture on soft metals such as gold, silver, and copper\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHandle crafted from African Padauk\u003c\/strong\u003e (a type of Rosewood) for a smooth, well-balanced feel—handle weight is proportioned to head weight for optimal balance\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHammer head cast in 420 stainless steel\u003c\/strong\u003e and hardened to 50Rc for long-lasting durability and performance\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHighly polished head\u003c\/strong\u003e reduces marring on workpieces and maintains surface quality over time\u003c\/li\u003e\n  \u003cli\u003eHandle color may vary from dark brown to lighter shades depending on Fretz's sourcing of recycled Asian Padauk—finish quality is consistent regardless of shade\u003c\/li\u003e\n  \u003cli\u003eSimilar in size and profile to other hammers in the Fretz Jewelers Hammers line\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eFretz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eHMR-22\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHead Type\u003c\/th\u003e\n\u003ctd\u003eTexturing\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFace Shape\u003c\/th\u003e\n\u003ctd\u003eFlat \/ Textured (Sandstone Crosshatch)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFace Size\u003c\/th\u003e\n\u003ctd\u003e19.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHead Length\u003c\/th\u003e\n\u003ctd\u003e75mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHead Weight\u003c\/th\u003e\n\u003ctd\u003e3.1 oz. (88g)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eOverall Length\u003c\/th\u003e\n\u003ctd\u003e9\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHead Material\u003c\/th\u003e\n\u003ctd\u003e420 Stainless Steel, hardened to 50Rc\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHandle Material\u003c\/th\u003e\n\u003ctd\u003eAfrican Padauk (Rosewood family)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCountry of Origin\u003c\/th\u003e\n\u003ctd\u003eVietnam\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Fretz","offers":[{"title":"Default Title","offer_id":43579737571542,"sku":"137.216","price":73.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/fretz-hmr-22-sandstone-texturing-hammer-otto-frei-1.jpg?v=1719958484"},{"product_id":"stubby-1lb-brass-head-hammer","title":"Stubby Short and Sweet 1lb Brass Head Hammer","description":"\u003cp\u003eAffectionately known as the \"Stubby,\" this solid brass head hammer delivers serious impact in a compact, easy-to-handle package. Weighing in at 1 lb, the brass head provides the consistent, dense mass needed for clean, crisp impressions when working with alphabet stamps, design stamps, and metal forming applications. The short ergonomic handle — measuring just 6-1\/4\" overall — keeps your hand close to the work surface, giving you pinpoint accuracy and greater control with every strike. Whether you're a metalsmith, jeweler, or stamping enthusiast, this hammer's balance of weight and compact form makes it a reliable bench tool for repetitive stamping work.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSolid brass head delivers consistent, dense impact for stamp work\u003c\/li\u003e\n\u003cli\u003eShort ergonomic handle promotes accuracy and reduces fatigue during repetitive use\u003c\/li\u003e\n\u003cli\u003eWell-suited for use with alphabet stamps and design stamps of all sizes\u003c\/li\u003e\n\u003cli\u003eCompact overall length keeps your hand close to the work for greater control\u003c\/li\u003e\n\u003cli\u003e1 lb head weight provides substantial force without excessive swing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eHead Material\u003c\/th\u003e\n\u003ctd\u003eSolid brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead Weight\u003c\/th\u003e\n\u003ctd\u003e1 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall Length\u003c\/th\u003e\n\u003ctd\u003e6-1\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVariant Count\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eNotes\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eThis product is tagged Prop 65 – Lead. Use appropriate precautions when handling.\u003c\/li\u003e\u003c\/ul\u003e","brand":"Otto Frei","offers":[{"title":"Default Title","offer_id":43579742027990,"sku":"137.525","price":23.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/stubby-short-and-sweet-1lb-brass-head-hammer-otto-frei.jpg?v=1719958484"},{"product_id":"wood-dapping-mallet-set","title":"Wood Dapping Mallet Set","description":"\u003cp\u003eThe Wood Dapping Mallet Set from Value Line delivers non-marring performance for forming and shaping metal without scratching or denting your workpiece. Crafted from hard wood, each mallet head features a gently domed face with a smooth finish, making it ideal for use with wood dapping blocks. The comfort handle is designed for a firm grip during extended forming and hammering sessions. This two-piece set includes a large mallet at 70mm and a medium mallet at 55mm, giving you the versatility to work across a range of dome sizes and sheet gauges.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHard wood construction provides non-marring contact — protects metal surfaces during forming\u003c\/li\u003e\n\u003cli\u003eGently domed mallet faces with smooth finish for clean, consistent results\u003c\/li\u003e\n\u003cli\u003eComfort handle design allows for a firm, controlled grip\u003c\/li\u003e\n\u003cli\u003eTwo-piece set covers large (70mm) and medium (55mm) mallet sizes\u003c\/li\u003e\n\u003cli\u003eCompatible with a wide variety of wood dapping blocks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSet Contents\u003c\/th\u003e\n\u003ctd\u003e2 mallets (large and medium)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLarge Mallet Diameter\u003c\/th\u003e\n\u003ctd\u003e70mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMedium Mallet Diameter\u003c\/th\u003e\n\u003ctd\u003e55mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eHard wood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSmooth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eValue Line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 large hard wood dapping mallet — 70mm\u003c\/li\u003e\n\u003cli\u003e1 medium hard wood dapping mallet — 55mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Value Line","offers":[{"title":"Default Title","offer_id":43579748221142,"sku":"125.114","price":11.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/wood-dapping-mallet-set-otto-frei.jpg?v=1719958479"},{"product_id":"fretz-revere-r-cr-chasing-riveting-hammer","title":"Fretz Revere R-CR Chasing\/Riveting Hammer","description":"\u003cp\u003eDesigned in collaboration with master jeweler Alan Revere, the Fretz Revere R-CR Chasing\/Riveting Hammer combines two purpose-built faces into a single, well-balanced tool for jewelry making. As Alan Revere describes it: \u003cem\u003e\"Essential for jewelry making, this hammer combines two faces, which are used in different operations. The chasing face is used to strike tools only, not jewelry. Use it for center punches, chasing punches, etc. The surface is not maintained and will show marks and dings, which is fine because this tool is not used on jewelry metals themselves. The riveting face is a small cross peen. It is ideal for upsetting, or spreading the ends of rivets when cold-joining metals. The hammer needs no maintenance.\"\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eThe round chasing face measures \u003cstrong\u003e25mm (approximately 1\") in diameter\u003c\/strong\u003e and is \u003cstrong\u003eflat, not domed\u003c\/strong\u003e — a deliberate design choice, as a domed face can allow a strike to slide off its intended target. The face carries a standard machine finish rather than a high-polish surface, a practical decision since the chasing end is used to strike tools, not jewelry metals directly.\u003c\/p\u003e\u003cp\u003eThe opposite face is a \u003cstrong\u003ecross peen riveting head\u003c\/strong\u003e measuring 10 x 2mm, ideal for upsetting and spreading rivet ends when cold-joining metals. Beyond riveting, this cross peen can also be used for texturing and light-duty raising — a more versatile choice than a traditional ball peen, in Mr. Revere's view.\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003epistol-shaped handle is intentionally thinner\u003c\/strong\u003e than those found on most contemporary hammers, providing excellent balance and sensitivity in the hand. The handle features a \u003cstrong\u003edistinctive deep texture\u003c\/strong\u003e developed to Alan Revere's exact specifications — unlike the smooth, polished handles found on other Fretz hammers, this texture enhances feel and control during use.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDual-face design: flat round chasing face and cross peen riveting face\u003c\/li\u003e\n\u003cli\u003eFlat 25mm chasing face prevents glancing strikes on tool heads\u003c\/li\u003e\n\u003cli\u003eStandard machine finish on chasing face — practical for tool-striking work\u003c\/li\u003e\n\u003cli\u003eCross peen face suited for riveting, texturing, and light raising\u003c\/li\u003e\n\u003cli\u003eThin pistol-grip handle for superior balance and hand sensitivity\u003c\/li\u003e\n\u003cli\u003eDeeply textured handle surface developed to Alan Revere's specifications\u003c\/li\u003e\n\u003cli\u003eNo maintenance required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eMaker\u003c\/th\u003e\n\u003ctd\u003eFretz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eR-CR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead Type\u003c\/th\u003e\n\u003ctd\u003eCombination (Chasing \/ Riveting)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFace Shape\u003c\/th\u003e\n\u003ctd\u003eRound (chasing) \/ Rectangular cross peen (riveting)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFace Sizes\u003c\/th\u003e\n\u003ctd\u003e25mm round \u0026amp; 10 x 2mm cross peen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead Length\u003c\/th\u003e\n\u003ctd\u003e60mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead Weight\u003c\/th\u003e\n\u003ctd\u003e2.1 oz. (60g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall Length\u003c\/th\u003e\n\u003ctd\u003e9-3\/8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCountry of Origin\u003c\/th\u003e\n\u003ctd\u003eVietnam\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eNotes\u003c\/h3\u003e\u003cp\u003eThe chasing face is intended exclusively for striking tools such as center punches and chasing punches — not for direct contact with jewelry metals. Surface marks and dings on the chasing face are normal and expected with use.\u003c\/p\u003e","brand":"Fretz","offers":[{"title":"Default Title","offer_id":43579749204182,"sku":"137.170","price":73.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/fretz-revere-r-cr-chasingriveting-hammer-otto-frei-1.jpg?v=1719958479"},{"product_id":"fretz-sh-1-jewelers-sledge-hammer","title":"Fretz SH-1 Jewelers Sledge Hammer","description":"\u003cp\u003eThe Fretz SH-1 Jewelers Sledge Hammer is the largest hammer in the Fretz line — a serious forging tool designed by Bill and Jordan Fretz for moving heavy wire, rod, and sheet metal with authority. The massive 5-3\/8\" (135mm) polished stainless steel head sits on a thicker axe-style handle crafted from Padauk hardwood, smoothly finished for a refined, professional feel in the hand.\u003c\/p\u003e\u003cp\u003eThe head profile is modeled after a modified goldsmith's hammer, featuring a round 1-1\/8\" (27mm) diameter striking face on one end and a 1\" x 1\/4\" (25mm x 6mm) cross-peen wedge on the other. The round face is intentionally sized so the workpiece remains visible as the hammer descends — a thoughtful design detail that improves accuracy during heavy forging work. The cross-peen end is used with a choked-up grip, providing a comfortable hold and the precision needed for controlled, directional metal movement.\u003c\/p\u003e\u003cp\u003eAt 1.65 lbs. (0.75 kg), the weight of the head does most of the work, reducing fatigue during extended forging sessions. The curved handle geometry complements the hammer's balance, making it easier to control despite its substantial mass.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eFrom Bill Fretz: \"The Fretz Jewelers Sledge Hammer is designed for forging heavy wire, rod, or sheet. The relatively small round face on a large hammer is designed so the work is visible as the hammer is descending towards the project. The curved handle makes the hammer easy to hold while the weight of the head does most of the work. The craftsperson chokes up on the handle while using the cross-peen end. This gives a comfortable holding position while the shorter grip helps with hammering accuracy needed with the cross-peen end.\"\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLargest hammer in the Fretz line — built for heavy forging applications\u003c\/li\u003e\n\u003cli\u003ePolished stainless steel head with modified goldsmith's profile\u003c\/li\u003e\n\u003cli\u003eRound 27mm striking face keeps workpiece visible during descent\u003c\/li\u003e\n\u003cli\u003eCross-peen wedge end (25mm x 6mm) for directional metal movement\u003c\/li\u003e\n\u003cli\u003eAxe-style Padauk hardwood handle, smoothly finished\u003c\/li\u003e\n\u003cli\u003eCurved handle geometry promotes comfortable grip and natural swing\u003c\/li\u003e\n\u003cli\u003eHead weight does the work — reduces hand and wrist fatigue\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eSH-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead Material\u003c\/th\u003e\n\u003ctd\u003ePolished stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHandle Material\u003c\/th\u003e\n\u003ctd\u003ePadauk hardwood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead Length\u003c\/th\u003e\n\u003ctd\u003e135mm (5-3\/8\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall Length\u003c\/th\u003e\n\u003ctd\u003e11-3\/8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead Weight\u003c\/th\u003e\n\u003ctd\u003e1.65 lbs. (0.75 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRound Face Diameter\u003c\/th\u003e\n\u003ctd\u003e27mm (1-1\/8\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCross-Peen Face\u003c\/th\u003e\n\u003ctd\u003e25mm x 6mm (1\" x 1\/4\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead Type\u003c\/th\u003e\n\u003ctd\u003eForming\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCountry of Origin\u003c\/th\u003e\n\u003ctd\u003eVietnam\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Fretz","offers":[{"title":"Default Title","offer_id":43579750351062,"sku":"137.229","price":127.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/fretz-sh-1-jewelers-sledge-hammer-otto-frei-1.jpg?v=1719958479"},{"product_id":"chrome-plated-cast-iron-necklace-mandrel-5x7","title":"Quality Necklace Mandrel","description":"\u003cp\u003eThe Quality Necklace Mandrel is a versatile forming tool designed for light hammering, wax work, and jewelry display. Known in Germany as an \u003cem\u003eIron Maiden\u003c\/em\u003e, this mandrel provides a realistic neckline profile that makes it ideal for shaping, forming, and presenting necklaces with professional results. Constructed of chrome-plated cast iron with a polished finish, it offers a smooth working surface at an accessible price point.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eChrome-plated cast iron construction with a polished finish\u003c\/li\u003e\n\u003cli\u003eRealistic neckline profile suited for necklace forming and display\u003c\/li\u003e\n\u003cli\u003eAppropriate for light hammering and wax work\u003c\/li\u003e\n\u003cli\u003eDoubles as a display form for finished necklace pieces\u003c\/li\u003e\n\u003cli\u003eStable, solid construction for bench use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eChrome-plated cast iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePolished chrome plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e7\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e7\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eIndia\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eThis mandrel is intended for \u003cstrong\u003elight hammering only\u003c\/strong\u003e. It is not recommended for heavy forging or aggressive metalworking applications.\u003c\/p\u003e","brand":"Value Line","offers":[{"title":"Default Title","offer_id":43579750580438,"sku":"112.279","price":39.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/quality-necklace-mandrel-otto-frei.jpg?v=1719958477"},{"product_id":"chrome-plated-necklace-mandrel-5x7","title":"Premium Quality Plated Necklace Mandrel","description":"\u003cp\u003eThis premium quality necklace mandrel begins with the same foundation as the standard Quality Necklace Mandrel, then undergoes additional hand polishing followed by a special chrome plating process. The result is a smooth, shiny surface that sets it apart for professional use and display.\u003c\/p\u003e\u003cp\u003eKnown in Germany as the \u003cem\u003eIron Maiden\u003c\/em\u003e, this mandrel measures 5\" high by 7\" wide by 7\" long and is well suited for wax work, light hammering, and necklace display. Made in India.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eBecause this mandrel is chrome plated, it is not suited for direct hammer work with hard metal hammers. For hammering applications, use only non-marring mallets made of nylon or rawhide. For heavy metalworking, consider an unplated mandrel.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHand polished before plating for a smooth, refined surface\u003c\/li\u003e\n\u003cli\u003eSpecial chrome plating delivers a bright, shiny finish\u003c\/li\u003e\n\u003cli\u003eIdeal for wax work, necklace display, and light forming\u003c\/li\u003e\n\u003cli\u003eTraditional necklace mandrel form — known as the \u003cem\u003eIron Maiden\u003c\/em\u003e in Germany\u003c\/li\u003e\n\u003cli\u003eCompatible with non-marring nylon or rawhide mallets for light hammering\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e5\" high × 7\" wide × 7\" long\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eChrome plated with hand-polished surface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eIndia\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended Use\u003c\/th\u003e\n\u003ctd\u003eWax work, necklace display, light hammering with non-marring mallets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNot Recommended For\u003c\/th\u003e\n\u003ctd\u003eDirect hammer work with hard metal hammers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eNotes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThis mandrel is chrome plated and should not be used with hard metal hammers — doing so may damage the plating and the tool.\u003c\/li\u003e\n\u003cli\u003eFor light hammering, use only nylon or rawhide mallets to protect the finish.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Value Line","offers":[{"title":"Default Title","offer_id":43579750809814,"sku":"112.272","price":58.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/premium-quality-plated-necklace-mandrel-otto-frei.jpg?v=1719958478"},{"product_id":"metal-texturing-hammer-interchangeable-heads","title":"Metal Texturing Hammer With Nine Interchangeable Tips","description":"\u003cp\u003eCreate dramatic surface textures on metal with this versatile texturing hammer, designed for jewelers and metalsmiths who want multiple texture options in a single tool. Nine interchangeable texturing heads allow you to switch between distinct patterns and effects without changing tools. Each head is secured by a removable screw-down collar on each side of the hammer, making swaps quick and reliable during production work.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNine interchangeable texturing heads for a wide variety of surface patterns\u003c\/li\u003e\n\u003cli\u003eScrew-down collar system on each side of the hammer secures heads firmly in place\u003c\/li\u003e\n\u003cli\u003eQuick head changes support efficient workflow during metalsmithing and jewelry fabrication\u003c\/li\u003e\n\u003cli\u003e10 inches in overall length for comfortable handling and controlled striking\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall Length\u003c\/th\u003e\n\u003ctd\u003e10 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNumber of Texturing Heads\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead Retention\u003c\/th\u003e\n\u003ctd\u003eRemovable screw-down collar, both sides\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCountry of Origin\u003c\/th\u003e\n\u003ctd\u003ePakistan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTexturing hammer\u003c\/li\u003e\n\u003cli\u003eNine interchangeable texturing heads\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Otto Frei","offers":[{"title":"Default Title","offer_id":43579759493334,"sku":"137.146","price":34.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/metal-texturing-hammer-with-nine-interchangeable-tips-otto-frei-1.jpg?v=1719958469"},{"product_id":"metal-texturing-forming-hammer-interchangeable-tips","title":"Metal Texturing \u0026 Forming Hammer With 12 Interchangeable Tips","description":"\u003cp\u003eThe Metal Texturing \u0026amp; Forming Hammer is a versatile bench tool designed for jewelers and metalsmiths who need one hammer to handle both forming and surface decoration. The double-ended handle accepts interchangeable tips secured by screw-down collars on each side, making it fast and easy to switch between heads mid-project. With 10 unique tips included — spanning brass, nylon, and steel forming heads as well as a variety of texture heads — this hammer eliminates the need to reach for multiple tools when working through a design.\u003c\/p\u003e\n\u003cp\u003eThe 10-inch overall length provides comfortable control whether you are planishing sheet metal, doming small components, or stamping bold repeat patterns into your work.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDouble-ended handle with screw-down collars for fast, secure tip changes\u003c\/li\u003e\n\u003cli\u003eIncludes both forming and texturing tips in a single tool\u003c\/li\u003e\n\u003cli\u003eBrass tips for non-marring forming work\u003c\/li\u003e\n\u003cli\u003eNylon tip for gentle forming without surface damage\u003c\/li\u003e\n\u003cli\u003eSteel tips for heavier forming and crisp texture impressions\u003c\/li\u003e\n\u003cli\u003eMultiple texture patterns for decorative surface work on metal\u003c\/li\u003e\n\u003cli\u003e10 inches overall length for balanced bench use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall Length\u003c\/th\u003e\n\u003ctd\u003e10 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNumber of Tips Included\u003c\/th\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003ePakistan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHammer handle with screw-down tip collars\u003c\/li\u003e\n\u003cli\u003eBrass flat forming head\u003c\/li\u003e\n\u003cli\u003eBrass domed forming head\u003c\/li\u003e\n\u003cli\u003eNylon flat forming head\u003c\/li\u003e\n\u003cli\u003eSteel flat forming head\u003c\/li\u003e\n\u003cli\u003eSteel domed forming head\u003c\/li\u003e\n\u003cli\u003eCircle texture head\u003c\/li\u003e\n\u003cli\u003eCross-hatch texture head\u003c\/li\u003e\n\u003cli\u003eStar texture head\u003c\/li\u003e\n\u003cli\u003eLine texture head\u003c\/li\u003e\n\u003cli\u003eRound dot texture head\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eThis product is subject to California Proposition 65 warnings. Please handle in accordance with applicable safety guidelines.\u003c\/p\u003e","brand":"Value Line","offers":[{"title":"Default Title","offer_id":43579759689942,"sku":"137.138","price":29.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/metal-texturing-and-forming-hammer-with-12-interchangeable-tips-otto-frei.jpg?v=1719958466"},{"product_id":"fretz-bh-1-blowhorn-t-stake-8in-420-stainless","title":"Fretz BH-1 Large Blowhorn T-Stake - 8\" Across","description":"\u003cp\u003eThe \u003cstrong\u003eFretz BH-1 Large Blowhorn T-Stake\u003c\/strong\u003e measures 8\" (223mm) from tip to tip, making it an ideal forming tool for traditional silversmithing work on full-size vessels and other large-format pieces. Cast from 420 stainless steel and hardened to 50 HRC — the same grade and hardness used in all Fretz hammers — this stake delivers the durability and surface quality that professional metalsmiths demand.\u003c\/p\u003e\u003cp\u003eUnlike most cast iron silversmith stakes, the BH-1 resists denting and will not rust. The highly polished working surface helps produce smooth, refined forms without unwanted texture transfer. Compatible with Fretz stake holders 112.720 and 112.721, this stake is designed to be mounted to a stump or heavy workbench for optimal performance, reducing bounce and minimizing arm fatigue during extended forming sessions.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e8\" (223mm) tip-to-tip length for large-format forming work\u003c\/li\u003e\n\u003cli\u003eCast from 420 stainless steel — same grade as all Fretz hammers\u003c\/li\u003e\n\u003cli\u003eHardened to 50 HRC for long-lasting durability\u003c\/li\u003e\n\u003cli\u003eHighly polished surface for smooth metalsmithing results\u003c\/li\u003e\n\u003cli\u003eResists denting and rust — outlasts traditional cast iron stakes\u003c\/li\u003e\n\u003cli\u003eCompatible with Fretz stake holders 112.720 and 112.721\u003c\/li\u003e\n\u003cli\u003eBest used mounted to a stump or heavy workbench to reduce bounce and arm fatigue\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eBH-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTip-to-Tip Length\u003c\/th\u003e\n\u003ctd\u003e8\" (223mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e420 Stainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHardness\u003c\/th\u003e\n\u003ctd\u003e50 HRC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHighly polished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Stake Holders\u003c\/th\u003e\n\u003ctd\u003e112.720, 112.721\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Fretz","offers":[{"title":"Default Title","offer_id":43579760967894,"sku":"112.755","price":325.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/fretz-bh-1-large-blowhorn-t-stake-8-across-otto-frei.jpg?v=1719958466"},{"product_id":"wood-dapping-block-steel-plate","title":"Closeout Wood Dapping Block with 3\" x 3\" Steel Plate","description":"\u003cp\u003eThe Value Line Wood Dapping Block combines a hardwood forming surface with an integrated steel plate, giving jewelers and metalsmiths two working surfaces in a single tool. The block measures 8-1\/2\" × 6\" × 1\" thick and features seven shallow round depressions with a gentle slope — ideal for doming and shaping metal without marring the surface. A 3\" × 3\" steel plate is fixed directly into the block, providing a hard, flat working area alongside the wood depressions.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSeven shallow round depressions with a gentle, gradual slope for smooth metal forming\u003c\/li\u003e\n  \u003cli\u003eHardwood surface shapes metal without scratching or marring\u003c\/li\u003e\n  \u003cli\u003eIntegrated 3\" × 3\" steel plate fixed into the block for dual-surface versatility\u003c\/li\u003e\n  \u003cli\u003eDepression diameters range from 20mm – 55mm, covering a wide range of forming needs\u003c\/li\u003e\n  \u003cli\u003eSubstantial 8-1\/2\" × 6\" footprint provides a stable working platform\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eBlock Dimensions\u003c\/th\u003e\n\u003ctd\u003e8-1\/2\" × 6\" × 1\" thick\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSteel Plate Size\u003c\/th\u003e\n\u003ctd\u003e3\" × 3\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNumber of Depressions\u003c\/th\u003e\n\u003ctd\u003e7\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDepression Diameter Range\u003c\/th\u003e\n\u003ctd\u003e20mm – 55mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eHardwood with fixed steel plate\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eValue Line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDepression Sizes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e20mm\u003c\/li\u003e\n  \u003cli\u003e23mm\u003c\/li\u003e\n  \u003cli\u003e27mm\u003c\/li\u003e\n  \u003cli\u003e33mm\u003c\/li\u003e\n  \u003cli\u003e39mm\u003c\/li\u003e\n  \u003cli\u003e41mm\u003c\/li\u003e\n  \u003cli\u003e55mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Value Line","offers":[{"title":"Default Title","offer_id":43579761328342,"sku":"125.1137","price":19.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/closeout-wood-dapping-block-with-3-x-3-steel-plate-otto-frei.jpg?v=1719958467"},{"product_id":"omo-combination-drawplate-round-half-round-square-60-holes","title":"Drawplate 100U Combination Round, Half-Round \u0026 Square 60 Holes Made in Italy","description":"\u003cp\u003e\u003cstrong\u003eDrawplate 100U – Combination Round, Half-Round \u0026amp; Square | 60 Holes | Made in Italy by OMO\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis combination drawplate gives wire workers and metalsmiths three essential profiles in a single precision-machined tool. The 60 holes span round, half-round, and square cross-sections, covering a practical working range without the need to swap between separate plates. Built to the American pattern – a sizing convention first established in 19th-century U.S. manufacturing – this plate carries on a long tradition of standardized drawplate design, now produced in Italy by OMO with metric-calibrated precision.\u003c\/p\u003e\u003cp\u003eThe American pattern drawplate has a history as interesting as its utility. Originally produced in the United States, these plates became so widely adopted that their alphabetic hole identifications (A, B, V, and so on) effectively set a global standard. French manufacturers carried the tradition forward for decades, but French-made plates had largely disappeared from the market by the late 20th century. Today, OMO in Italy produces this classic American pattern format with improved dimensional accuracy and modern metric calibration – preserving the familiar layout while bringing it to contemporary workshop standards.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThree profiles in one tool: round, half-round, and square\u003c\/li\u003e\n\u003cli\u003e60 total holes for a broad range of wire sizes and profiles\u003c\/li\u003e\n\u003cli\u003eAmerican pattern layout with alphabetic hole identification\u003c\/li\u003e\n\u003cli\u003eMetric-calibrated holes for precise, repeatable wire drawing\u003c\/li\u003e\n\u003cli\u003eMade in Italy by OMO\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eRound Range\u003c\/th\u003e\n\u003ctd\u003e1 mm – 3.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHalf-Round Range\u003c\/th\u003e\n\u003ctd\u003e5 mm – 3.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSquare Range\u003c\/th\u003e\n\u003ctd\u003e1 mm – 3.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTotal Holes\u003c\/th\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePattern\u003c\/th\u003e\n\u003ctd\u003eAmerican pattern with alphabetic identification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCalibration\u003c\/th\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCountry of Origin\u003c\/th\u003e\n\u003ctd\u003eItaly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eOMO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eNotes\u003c\/h3\u003e\u003cp\u003eThe half-round range listed (5 mm – 3.5 mm) reflects the source product data as provided. Verify dimensions against the physical plate for your specific application.\u003c\/p\u003e","brand":"OMO","offers":[{"title":"Default Title","offer_id":43579764048086,"sku":"128.051","price":250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/drawplate-100u-combination-round-half-round-and-square-60-holes-made-in-italy-otto-frei-1.jpg?v=1719958466"},{"product_id":"profiform-200-bench-shear-bending-brake-200mm-18ga","title":"Profiform 200 Basic Unit-7-3\/4\" Bench Shear \u0026 Bending Brake","description":"\u003cp\u003e\u003cstrong\u003eProfiform 200\u003c\/strong\u003e is the original Swiss-made, hand-operated sheet-metal machine for clean shearing and precise bending at the bench. It cuts gold, silver, copper, and brass sheet up to \u003cstrong\u003e200 mm (7-3\/4\") wide\u003c\/strong\u003e and \u003cstrong\u003e18 gauge (≈1.0 mm)\u003c\/strong\u003e thick, with ground, hardened reversible \u003cstrong\u003ehigh-speed steel cutters\u003c\/strong\u003e that offer \u003cstrong\u003efour cutting edges\u003c\/strong\u003e for long service life. V-blocks and bending punches are made of high-grade profiled steel for crisp, repeatable bends. It also works well on plastics, paper, PCB, veneer, and other thin materials.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShear \u0026amp; bend in one tool:\u003c\/strong\u003e Clean shearing plus brake for accurate bends.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReversible HSS cutters:\u003c\/strong\u003e Precision-ground, hardened, four-edge blades extend usable life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwiss made:\u003c\/strong\u003e Original, high-precision build for prototypes, models, jewelry, and small parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile materials:\u003c\/strong\u003e Metals, plastics, paper, cardboard, PCB, veneer, and more.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eMax Cut Width\u003c\/th\u003e\n\u003ctd\u003e7-3\/4\" (200 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax Thickness – Non-ferrous (Au\/Ag\/Cu\/Br)\u003c\/th\u003e\n\u003ctd\u003e18 ga ≈ 1.0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax Thickness – Aluminum \/ Plastics\u003c\/th\u003e\n\u003ctd\u003e≈ 1.5 mm (0.059\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCutters\u003c\/th\u003e\n\u003ctd\u003ePrecision-ground, hardened, reversible HSS (4 cutting edges)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBending Tools\u003c\/th\u003e\n\u003ctd\u003eV-blocks \u0026amp; punches in high-grade profiled steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOperations\u003c\/th\u003e\n\u003ctd\u003eShearing, bending; punching with optional accessories\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCountry of Origin\u003c\/th\u003e\n\u003ctd\u003eSwitzerland\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eProfiform 200 basic machine (shear \u0026amp; brake)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eNotes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThis listing is for the \u003cstrong\u003ebasic Profiform 200\u003c\/strong\u003e (shearing \u0026amp; bending). Punching requires optional accessories sold separately.\u003c\/li\u003e\n\u003cli\u003eFor best results, use within the stated width and thickness capacities and keep blades properly indexed to a fresh cutting edge.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Profiform","offers":[{"title":"Default Title","offer_id":43579765031126,"sku":"153.400","price":1515.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/profiform-200-basic-unit-7-34-bench-shear-and-bending-brake-otto-frei.jpg?v=1719958465"},{"product_id":"durston-24-punch-matched-dapping-set","title":"Durston Large 24 Punch Matched Dapping Punch \u0026 Die Set","description":"\u003cp\u003eThe \u003cstrong\u003eDurston Large 24 Punch Matched Dapping Punch \u0026amp; Die Set\u003c\/strong\u003e is a professional-grade forming tool set made by W. Durston Ltd of High Wycombe, Great Britain. Crafted from properly hardened and polished English steel, this set delivers the quality and precision that serious jewelers and metalsmiths demand at a value that competes with comparable German and Italian makes.\u003c\/p\u003e\u003cp\u003eThe set includes 24 highly polished dapping punches ranging from 3.0mm (1\/8\") to 50.0mm (2\") in diameter, each with a precisely matched depression in the included 65mm (2-1\/2\") square dapping block, forming a complete 25-piece matched system. Punches are stored on a form-fitting plastic stand that keeps the set organized and protected. Durston part number 1101.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e24 hardened and polished English steel dapping punches\u003c\/li\u003e\n\u003cli\u003ePunch sizes range from 3.0mm (1\/8\") to 50.0mm (2\") in diameter\u003c\/li\u003e\n\u003cli\u003eEach punch has a precisely matched depression in the included dapping block\u003c\/li\u003e\n\u003cli\u003eIncludes one 65mm (2-1\/2\") square dapping block\u003c\/li\u003e\n\u003cli\u003eForm-fitting plastic stand keeps the full set organized\u003c\/li\u003e\n\u003cli\u003eMade by W. Durston Ltd, High Wycombe, Great Britain\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eTotal Pieces\u003c\/th\u003e\n\u003ctd\u003e25 (24 punches + 1 dapping block)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePunch Size Range\u003c\/th\u003e\n\u003ctd\u003e3.0mm (1\/8\") – 50.0mm (2\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePunch Sizes Included\u003c\/th\u003e\n\u003ctd\u003e3.0, 4.0, 5.0, 6.0, 7.0, 8.0, 9.0, 10.0, 11.0, 12.0, 13.0, 14.0, 15.0, 17.0, 19.0, 21.0, 23.0, 25.0, 28.0, 32.0, 36.0, 40.0, 45.0, 50.0mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDapping Block Size\u003c\/th\u003e\n\u003ctd\u003e65mm (2-1\/2\") square\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStand Dimensions\u003c\/th\u003e\n\u003ctd\u003e10\" long × 7\" wide × 6\" high (with punches mounted)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eHardened and polished English steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eMade in England by W. Durston Ltd, High Wycombe, Great Britain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDurston Part Number\u003c\/th\u003e\n\u003ctd\u003e1101\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e24 matched dapping punches (3.0mm – 50.0mm)\u003c\/li\u003e\n\u003cli\u003e1 square 65mm dapping block with 24 matched depressions\u003c\/li\u003e\n\u003cli\u003eForm-fitting plastic storage and display stand\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43579766210774,"sku":"125.008","price":389.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-large-24-punch-matched-dapping-punch-and-die-set-otto-frei.jpg?v=1719958465"},{"product_id":"extra-large-matched-dapping-punch-die-set","title":"Extra Large Matched Dapping Punch \u0026 Die Set","description":"\u003cp\u003eThe Extra Large Matched Dapping Punch \u0026amp; Die Set from Value Line delivers professional-grade forming capability for jewelers and metalsmiths working with larger dome dimensions. This set pairs six oversized dapping punches with a precisely matched square steel dapping block, giving you consistent hemispherical results across a full range of extra-large sizes — all organized on a dedicated wood storage stand.\u003c\/p\u003e\n\n\u003cp\u003eThe set includes punches in six sizes — 1.25\", 1.50\", 1.75\", 2.00\", 2.25\", and 2.50\" — each matched to one of six hemispherical depressions in the accompanying steel dapping die. The punches range in height from 4\" to 6\". The steel die measures 3\" square. The wood storage stand measures 7‑1\/2\" wide by 6‑1\/2\" deep by 2‑3\/8\" high and keeps the full set organized and ready for use at the bench.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSix extra-large dapping punches: 1.25\", 1.50\", 1.75\", 2.00\", 2.25\", and 2.50\"\u003c\/li\u003e\n\u003cli\u003eSquare steel dapping die with six matched hemispherical depressions\u003c\/li\u003e\n\u003cli\u003eEach punch is precisely matched to its corresponding die depression\u003c\/li\u003e\n\u003cli\u003ePunch heights range from 4\" to 6\"\u003c\/li\u003e\n\u003cli\u003eIncludes wood storage stand to organize the full set\u003c\/li\u003e\n\u003cli\u003eAbove-average quality construction from an established India manufacturer\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePunch Sizes\u003c\/th\u003e\n\u003ctd\u003e1.25\", 1.50\", 1.75\", 2.00\", 2.25\", 2.50\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePunch Heights\u003c\/th\u003e\n\u003ctd\u003e4\" – 6\" (varies by size)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSteel Die Size\u003c\/th\u003e\n\u003ctd\u003e3\" square\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWood Stand Dimensions\u003c\/th\u003e\n\u003ctd\u003e7-1\/2\" wide × 6-1\/2\" deep × 2-3\/8\" high\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNumber of Punches\u003c\/th\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDie Depressions\u003c\/th\u003e\n\u003ctd\u003e6 matched hemispherical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eIndia\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e6 extra-large dapping punches (1.25\", 1.50\", 1.75\", 2.00\", 2.25\", 2.50\")\u003c\/li\u003e\n\u003cli\u003e1 square steel dapping die block with 6 matched hemispherical depressions\u003c\/li\u003e\n\u003cli\u003e1 wood storage stand\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Value Line","offers":[{"title":"Default Title","offer_id":43579766702294,"sku":"125.153","price":175.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/extra-large-matched-dapping-punch-and-die-set-otto-frei.jpg?v=1719958462"},{"product_id":"durston-ring-stretcher-reducer-bender-1302","title":"Durston Ring Stretcher, Reducer \u0026 Bender","description":"\u003cp\u003eThe \u003cstrong\u003eDurston Ring Stretcher, Reducer \u0026amp; Bender\u003c\/strong\u003e is a professional-grade combination tool engineered for jewelers who work with plain wedding bands in gold, silver, platinum, and palladium. Made in Great Britain by Durston (model 1302), this upright tool consolidates three essential ring-working functions into a single bench-mounted unit — stretching, reducing, and bending — eliminating the need for multiple separate tools.\u003c\/p\u003e\u003cp\u003eThe 6-spline stretching mandrel expands on the upstroke of the handle, allowing precise stretching of non-stone-set, non-ferrous plain wedding bands. A double-sided 16-hole band reducing plate accommodates most popular domed band profiles for compression work. A built-in ring bending jig with a single die for domed stock rounds out the tool's capabilities. The unit requires no maintenance and is ready to use straight from the box.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eFor use with non-ferrous metals only (gold, silver, platinum, palladium, etc.). Not suitable for stretching or reducing steel bands.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThree functions in one tool: stretching, reducing, and ring bending\u003c\/li\u003e\n\u003cli\u003e6-spline mandrel expands on the upstroke for controlled band stretching\u003c\/li\u003e\n\u003cli\u003eDouble-sided 16-hole reducing plate for compressing domed-profile bands\u003c\/li\u003e\n\u003cli\u003eBuilt-in ring bending jig with a single die designed for domed stock\u003c\/li\u003e\n\u003cli\u003eUpright bench-mount design with four base mounting holes for secure attachment\u003c\/li\u003e\n\u003cli\u003eNo maintenance required\u003c\/li\u003e\n\u003cli\u003eMade in Great Britain by Durston\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eDurston 1302\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e16-3\/4 in. (425 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFootprint\u003c\/th\u003e\n\u003ctd\u003e6-3\/4 in. × 4-3\/4 in. (170 mm × 120 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStretching Mandrel\u003c\/th\u003e\n\u003ctd\u003e6-spline, expands on upstroke\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReducing Plate\u003c\/th\u003e\n\u003ctd\u003eDouble-sided, 16 holes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Metals\u003c\/th\u003e\n\u003ctd\u003eGold, silver, platinum, palladium (non-ferrous only)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eMade in Great Britain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVariant Count\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eNotes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDesigned for plain, non-stone-set wedding bands only.\u003c\/li\u003e\n\u003cli\u003eNot intended for use with steel or ferrous metal bands.\u003c\/li\u003e\n\u003cli\u003eMounting hardware is not included.\u003c\/li\u003e\n\u003cli\u003eNo instructions are included with this tool.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43579767128278,"sku":"148.327","price":569.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-ring-stretcher-reducer-and-bender-otto-frei.jpg?v=1719958462"},{"product_id":"german-drawtongs-8-inch-wire-drawing","title":"Drawtongs-German High Quality Small 8 Inch (205mm)","description":"\u003cp\u003eThese small 8-inch (205mm) drawtongs are precision-engineered in Germany for professional wire drawing applications. Featuring an interlocking diamond-shaped jaw texture, they deliver a superior grip that securely holds wire throughout the drawing process. The heat-treated bent handles are built for long-term durability under demanding workshop conditions — a clear step above lower-cost alternatives.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInterlocking diamond-shaped jaw texture for superior, consistent grip on wire\u003c\/li\u003e\n\u003cli\u003eHeat-treated bent handles for lasting strength and durability\u003c\/li\u003e\n\u003cli\u003eGerman high-quality construction designed to securely hold wire during drawing\u003c\/li\u003e\n\u003cli\u003e8-inch (205mm) compact size suited for smaller-scale wire drawing work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e8 inches (205mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eJaw Texture\u003c\/th\u003e\n\u003ctd\u003eInterlocking diamond pattern\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHandle Type\u003c\/th\u003e\n\u003ctd\u003eBent, heat-treated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eGermany\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Otto Frei","offers":[{"title":"Default Title","offer_id":43579768635606,"sku":"019.885","price":98.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/drawtongs-german-high-quality-small-8-inch-205mm-otto-frei.jpg?v=1719958462"},{"product_id":"steel-ring-mandrel-usa-sizes-1-15-quarter-size-no-groove","title":"Steel Ring Mandrel Graduated In USA sizes 1 To 15 By 1\/4 Size-No Groove","description":"\u003cp\u003eA reliable workhorse for the bench, this hardened steel ring mandrel is graduated in USA sizes from 1 to 15 in 1\/4-size increments — no groove. Otto Frei sourced this mandrel after testing multiple mid-priced options and found it to be the best of the group: accurately sized, properly hardened, and produced on modern CNC machinery. It is an excellent choice for beginners, students, and working jewelers who need a dependable mandrel at a practical price point.\u003c\/p\u003e\u003cp\u003eManufactured in India by the same factory that produces mandrels sold under major jewelry tool brand names, this mandrel is made on German CNC equipment — a detail that speaks directly to the consistency of its graduation marks and the quality of its taper.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eGraduated in USA ring sizes 1 through 15 in 1\/4-size steps\u003c\/li\u003e\n\u003cli\u003eNo groove — clean, uninterrupted taper surface\u003c\/li\u003e\n\u003cli\u003eProperly hardened steel for durability and accurate sizing\u003c\/li\u003e\n\u003cli\u003eProduced on German CNC machinery for consistent graduation accuracy\u003c\/li\u003e\n\u003cli\u003eRecommended for beginners, students, and everyday bench use\u003c\/li\u003e\n\u003cli\u003eOtto Frei tested and selected as the best mid-priced ring mandrel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eHardened steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize Range\u003c\/th\u003e\n\u003ctd\u003eUSA sizes 1–15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGraduation Increment\u003c\/th\u003e\n\u003ctd\u003e1\/4 size\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGroove\u003c\/th\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCountry of Origin\u003c\/th\u003e\n\u003ctd\u003eIndia\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Otto Frei","offers":[{"title":"Default Title","offer_id":43579769880790,"sku":"143.079","price":21.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/steel-ring-mandrel-graduated-in-usa-sizes-1-to-15-by-14-size-no-groove-otto-frei.jpg?v=1719958460"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/collections\/forming-otto-frei.jpg?v=1726692479","url":"https:\/\/www.ottofrei.com\/collections\/forming-tools-jewelry-metalsmithing.oembed?page=6","provider":"Otto Frei","version":"1.0","type":"link"}