{"title":"Fretz","description":"","products":[{"product_id":"fretz-ma-series-large-mushroom-anvils-420-stainless-4-dome-profiles","title":"Fretz MA Large Mushroom Anvils","description":"\u003cp\u003eThe Fretz MA-Series Large Mushroom Anvils are round mushroom stakes approximately 70mm (2¾\") in diameter, crafted from 420 hardened stainless steel. Each stake in the four-piece series features a tapered tang designed to fit the Fretz H-101 Bench Holder (\u003cstrong\u003e112.720\u003c\/strong\u003e) or the Fretz VH-101 Vise Holder (\u003cstrong\u003e112.721\u003c\/strong\u003e). These are rugged, professional-grade forming tools built to handle everything from light finishing work to heavy forging with substantial hammers.\u003c\/p\u003e\u003cp\u003eThe MA-Series is engineered for forming and forging non-ferrous metals and jewelry. Each stake offers a distinct surface profile, making them highly versatile across a wide range of metalsmithing and hollowware applications. Whether you are shaping large pendants, raising forms, forging heavy wire stock, or adding dimensional curves to sheet metal, there is an MA stake suited to the task.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMA-1 – Flat:\u003c\/strong\u003e The flat-top version of the MA-Series functions as a flat jewelry anvil or as a stake for forming the bottom of hollowware. It is an excellent first stake for forging heavy stock metal wire or ingots.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMA-2 – Low Dome:\u003c\/strong\u003e The low domed surface is ideal for forming large pendants and adding subtle dimensional stability to smaller projects. Slightly domed shapes are less prone to bending in use than flat surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMA-3 – Medium Dome:\u003c\/strong\u003e A more pronounced dome than the MA-2, this stake is used when greater curvature is needed. It can also be used as a mallet: lay sheet metal on a sandbag, strike it with the domed surface while holding the tang, and the metal will become cupped in just a few blows. Metal can then be forged or textured with various hammers using the holder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMA-4 – High Dome (Half Round):\u003c\/strong\u003e The half-round domed profile produces dramatic curves on large surfaces. Small round or free-form shapes can be raised on the surface using a nylon or steel raising hammer — a technique more efficient than angle raising.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRound mushroom stake profile, approximately 70mm (2¾\") diameter\u003c\/li\u003e\n\u003cli\u003eConstructed from 420 hardened stainless steel\u003c\/li\u003e\n\u003cli\u003eTapered tang fits Fretz H-101 Bench Holder and Fretz VH-101 Vise Holder\u003c\/li\u003e\n\u003cli\u003eFour distinct dome profiles to suit a wide range of forming applications\u003c\/li\u003e\n\u003cli\u003eSuitable for use with light or very heavy hammers\u003c\/li\u003e\n\u003cli\u003eDesigned for forming and forging non-ferrous metals and jewelry\u003c\/li\u003e\n\u003cli\u003eMA-3 can be used as a mallet for cupping sheet metal on a sandbag\u003c\/li\u003e\n\u003cli\u003eMA-4 enables efficient raising without angle-raising techniques\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003eApproximately 70mm (2¾\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e420 hardened stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTang Style\u003c\/th\u003e\n\u003ctd\u003eTapered, fits Fretz H-101 and VH-101 holders\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eFretz MA-Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003ctd\u003eForming and forging non-ferrous metals and jewelry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eAvailable Options\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eDome Profile\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e112.646\u003c\/td\u003e\n\u003ctd\u003eMA-1\u003c\/td\u003e\n\u003ctd\u003eFlat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e112.647\u003c\/td\u003e\n\u003ctd\u003eMA-2\u003c\/td\u003e\n\u003ctd\u003eLow Dome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e112.648\u003c\/td\u003e\n\u003ctd\u003eMA-3\u003c\/td\u003e\n\u003ctd\u003eMedium Dome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e112.649\u003c\/td\u003e\n\u003ctd\u003eMA-4\u003c\/td\u003e\n\u003ctd\u003eHigh Dome (Half Round)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Fretz","offers":[{"title":"MA-1 Flat","offer_id":43578487046358,"sku":"112.646","price":107.0,"currency_code":"USD","in_stock":true},{"title":"MA-2 Low Dome","offer_id":43578487079126,"sku":"112.647","price":107.0,"currency_code":"USD","in_stock":true},{"title":"MA-3 Medium Dome","offer_id":43578487111894,"sku":"112.648","price":107.0,"currency_code":"USD","in_stock":true},{"title":"MA-4 High Dome","offer_id":43578487144662,"sku":"112.649","price":107.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/fretz-ma-large-mushroom-anvils-otto-frei-1.jpg?v=1719958865"},{"product_id":"fretz-handwrought-metal-dvds-wide-convex-concave-cuffs","title":"Fretz Productions DVD's","description":"\u003cp\u003eEnter the world of handwrought metal with stakes and hammers. In these professionally produced videos, master metalsmith \u003cstrong\u003eBill Fretz\u003c\/strong\u003e demonstrates the principles, tools, and techniques for forming \u003cstrong\u003ewide cuff bracelets\u003c\/strong\u003e using Fretz stakes and hammers—captured in HD with clear close-ups and straightforward instruction. Each DVD includes a full-color booklet for quick reference at the bench.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFoundations of cuff forming:\u003c\/strong\u003e How to raise (convex) and sink (concave) wide bracelets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool selection \u0026amp; setup:\u003c\/strong\u003e Choosing the right stakes and hammers; when to use pitch as a forming base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl \u0026amp; consistency:\u003c\/strong\u003e Sequencing blows, managing metal flow, and maintaining even wall thickness\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign evolution:\u003c\/strong\u003e Turning demonstrated projects into your own variations\u003c\/li\u003e\n\u003cli\u003eHD video with close-up camera work and clear narration by Bill Fretz\u003c\/li\u003e\n\u003cli\u003eFull-color printed booklet reinforces key steps and techniques\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAvailable Options\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003cth\u003eFocus\u003c\/th\u003e\n\u003cth\u003eRuntime\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e163.121\u003c\/td\u003e\n\u003ctd\u003eHandwrought Metal #1 – Wide Convex Cuffs\u003c\/td\u003e\n\u003ctd\u003eConvex raising: fluting and forming metal into convex bracelet shapes; using pitch as a flexible forming support\u003c\/td\u003e\n\u003ctd\u003e58 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e163.122\u003c\/td\u003e\n\u003ctd\u003eHandwrought Metal #2 – Wide Concave Cuffs\u003c\/td\u003e\n\u003ctd\u003eConcave sinking: shaping metal into concave cuffs; tour of specialty stakes and how to select them\u003c\/td\u003e\n\u003ctd\u003e63 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDVD with HD video instruction by Bill Fretz\u003c\/li\u003e\n\u003cli\u003eFull-color printed booklet for bench reference\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRecommended for jewelers and metalsmiths expanding into cuff bracelet work\u003c\/li\u003e\n\u003cli\u003eSuited for students and studios building structured stake-and-hammer technique\u003c\/li\u003e\n\u003cli\u003eIdeal for anyone using or planning to use Fretz stakes and hammers\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eTip:\u003c\/em\u003e Pair with a small assortment of stakes and a raising or sinking hammer to follow along and practice each sequence immediately\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fretz","offers":[{"title":"Wide Convex Cuffs DVD","offer_id":43578743259350,"sku":"163.121","price":15.0,"currency_code":"USD","in_stock":true},{"title":"Wide Concave Cuffs DVD","offer_id":43578743292118,"sku":"163.122","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/fretz-productions-dvd-s-otto-frei.jpg?v=1719958797"},{"product_id":"fretz-bench-anvils-420-stainless-padauk-4-shapes","title":"Fretz Bench Anvils-By The Piece","description":"\u003cp\u003eFretz Bench Anvils combine outstanding design with premium materials and craftsmanship. Each anvil is crafted from highly polished cast 420 stainless steel and mounted on a beautifully finished round of Padauk hardwood — built for a lifetime of shaping and forming metal.\u003c\/p\u003e\u003cp\u003eThe Padauk hardwood bases feature rubber feet that keep each anvil stable and in place on your bench while adding cushioning during use. Whether you are raising, doming, or forming sheet metal, these anvils deliver professional performance and a refined presence on any jeweler's bench.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHighly polished cast 420 stainless steel working surface\u003c\/li\u003e\n\u003cli\u003eMounted on a beautifully finished Padauk hardwood base\u003c\/li\u003e\n\u003cli\u003eRubber feet for stability and cushioning during use\u003c\/li\u003e\n\u003cli\u003eAvailable in four distinct top shapes to suit a variety of forming tasks\u003c\/li\u003e\n\u003cli\u003eBuilt for lasting professional use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAnvil Diameter\u003c\/th\u003e\n\u003ctd\u003e2-3\/4\" (70 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e420 stainless steel (polished cast)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase Material\u003c\/th\u003e\n\u003ctd\u003ePadauk hardwood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase Feet\u003c\/th\u003e\n\u003ctd\u003eRubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold As\u003c\/th\u003e\n\u003ctd\u003eBy the piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eAvailable Options\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eShape\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e112.602\u003c\/td\u003e\n\u003ctd\u003eBA-1 Flat Top, Slight Rounded Edges\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e112.603\u003c\/td\u003e\n\u003ctd\u003eBA-2 Low Dome, Rounded Edges\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e112.604\u003c\/td\u003e\n\u003ctd\u003eBA-3 Medium Domed, Mushroom Top\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e112.605\u003c\/td\u003e\n\u003ctd\u003eBA-4 High Dome Top\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Fretz","offers":[{"title":"BA-1 Flat Top Slight Rounded Edges","offer_id":43579001241814,"sku":"112.602","price":97.0,"currency_code":"USD","in_stock":true},{"title":"BA-2 Low Dome Rounded Edges","offer_id":43579001274582,"sku":"112.603","price":97.0,"currency_code":"USD","in_stock":true},{"title":"BA-3 Medium Domed Mushroom Top","offer_id":43579001307350,"sku":"112.604","price":97.0,"currency_code":"USD","in_stock":true},{"title":"BA-4 High Dome Top","offer_id":43579001340118,"sku":"112.605","price":97.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/112.602NEW_zoom1.jpg?v=1775511608"},{"product_id":"fretz-michael-good-hook-stakes-420-stainless-synclastic-anticlastic","title":"Fretz - Michael Good Hook Stakes","description":"\u003cp\u003e\u003cstrong\u003eFretz Michael Good Hook Stakes\u003c\/strong\u003e are precision-crafted forming tools designed for synclastic and anticlastic metalsmithing techniques. Developed through a collaboration between renowned tool maker Bill Fretz and award-winning jewelry designer and metalsmith Michael Good, these stakes bring professional-grade forming capability to any studio. The techniques they support were first pioneered by visionary metalsmith Heikki Seppa, and until this collaboration, tools of this caliber were largely unavailable commercially.\u003c\/p\u003e\u003cp\u003eEach stake is cast in 420 stainless steel, expertly hand polished, and hardened to 50C on the Rockwell scale—built to Michael Good's exacting specifications by the Fretz factory. Available individually or as a complete set of six stakes with the stake holder, these tools enable jewelers and metalsmiths to create the flowing, three-dimensional forms that define synclastic and anticlastic jewelry design.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDesigned for synclastic and anticlastic metal forming techniques\u003c\/li\u003e\n\u003cli\u003eDeveloped in collaboration with metalsmith and designer Michael Good\u003c\/li\u003e\n\u003cli\u003eCast in 420 stainless steel for durability and precision\u003c\/li\u003e\n\u003cli\u003eExpertly hand polished after casting\u003c\/li\u003e\n\u003cli\u003eHardened to 50C on the Rockwell scale\u003c\/li\u003e\n\u003cli\u003eAvailable individually or as a complete set with stake holder\u003c\/li\u003e\n\u003cli\u003eSix stake profiles spanning 4mm to 16mm working surfaces at varying angles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e420 stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHardness\u003c\/th\u003e\n\u003ctd\u003e50C Rockwell\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHand polished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eVietnam (Fretz factory)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003ctd\u003eSynclastic and anticlastic metal forming\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eAvailable Options\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003cth\u003eSize \/ Angle\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e112.760\u003c\/td\u003e\n\u003ctd\u003eStake Holder\u003c\/td\u003e\n\u003ctd\u003e85mm x 78mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e112.761\u003c\/td\u003e\n\u003ctd\u003eG1 Stake\u003c\/td\u003e\n\u003ctd\u003e16mm \/ 120 Degree\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e112.762\u003c\/td\u003e\n\u003ctd\u003eG2 Stake\u003c\/td\u003e\n\u003ctd\u003e16mm \/ 90 Degree\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e112.763\u003c\/td\u003e\n\u003ctd\u003eG3 Stake\u003c\/td\u003e\n\u003ctd\u003e12mm \/ 90 Degree\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e112.764\u003c\/td\u003e\n\u003ctd\u003eG4 Stake\u003c\/td\u003e\n\u003ctd\u003e8mm \/ 90 Degree\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e112.765\u003c\/td\u003e\n\u003ctd\u003eG5 Stake\u003c\/td\u003e\n\u003ctd\u003e6mm \/ 90 Degree\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e112.766\u003c\/td\u003e\n\u003ctd\u003eG6 Stake\u003c\/td\u003e\n\u003ctd\u003e4mm \/ 90 Degree\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Fretz","offers":[{"title":"Stake Holder","offer_id":43579042332886,"sku":"112.760","price":102.95,"currency_code":"USD","in_stock":true},{"title":"G1 Stake","offer_id":43579042365654,"sku":"112.761","price":113.95,"currency_code":"USD","in_stock":false},{"title":"G2 Stake","offer_id":43579042398422,"sku":"112.762","price":113.95,"currency_code":"USD","in_stock":true},{"title":"G3 Stake","offer_id":43579042431190,"sku":"112.763","price":92.95,"currency_code":"USD","in_stock":true},{"title":"G4 Stake","offer_id":43579042463958,"sku":"112.764","price":92.95,"currency_code":"USD","in_stock":true},{"title":"G5 Stake","offer_id":43579042496726,"sku":"112.765","price":92.95,"currency_code":"USD","in_stock":true},{"title":"G6 Stake","offer_id":43579042529494,"sku":"112.766","price":92.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/fretz-michael-good-hook-stakes-otto-frei.jpg?v=1719958711"},{"product_id":"fretz-bf-1-wavy-brass-bracelet-blank-19-gauge","title":"Fretz BF-1 Wavy Brass Form","description":"\u003cp\u003eThe \u003cstrong\u003eFretz BF-1 Wavy Brass Form\u003c\/strong\u003e is a pre-cut bracelet blank designed by master metalsmith Bill Fretz. This distinctive wavy profile is the exact shape Fretz uses in a series of jewelry projects first featured in the \u003cem\u003eJanuary\/February 2014 edition of Lapidary Journal\/Jewelry Artist Magazine\u003c\/em\u003e. The blank arrives ready to work — already cut, edge sanded, and tumbled — so you can move directly into forming, texturing, and finishing without prep work.\u003c\/p\u003e\u003cp\u003eThe BF-1 is the first in a line of creative brass blanks from Fretz, designed to open up a wide range of bracelet design possibilities. Its wavy form can be shaped into both concave and convex profiles, and the length can be cut shorter to accommodate smaller wrist sizes. At 19 gauge, the BF-1 reflects the recommendation of noted instructor Hans Christiansen, who identified this thickness as ideal for hollow-ware work — heavy enough for structural integrity, light enough to form with ease.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePre-cut wavy bracelet blank designed by Bill Fretz\u003c\/li\u003e\n\u003cli\u003eCut, edge sanded, and tumbled — ready to form immediately\u003c\/li\u003e\n\u003cli\u003eWavy profile suitable for both concave and convex bracelet shapes\u003c\/li\u003e\n\u003cli\u003eLength can be trimmed shorter for smaller bracelet sizes\u003c\/li\u003e\n\u003cli\u003e19 gauge thickness — recommended as the ideal gauge for hollow-ware forming\u003c\/li\u003e\n\u003cli\u003eNon-annealed brass construction\u003c\/li\u003e\n\u003cli\u003eAs featured in \u003cem\u003eLapidary Journal\/Jewelry Artist Magazine\u003c\/em\u003e, January\/February 2014\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e8-1\/2\" (215mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth (widest point)\u003c\/th\u003e\n\u003ctd\u003e1-1\/4\" (32mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGauge\u003c\/th\u003e\n\u003ctd\u003e19 gauge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNon-annealed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eCut, edge sanded, and tumbled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eNotes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThis product is subject to California Proposition 65 warnings regarding lead.\u003c\/li\u003e\n\u003cli\u003eBlank is non-annealed; anneal before forming if your technique requires it.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fretz","offers":[{"title":"Default Title","offer_id":43579647394006,"sku":"143.341","price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/fretz-bf-1-wavy-brass-form-otto-frei.jpg?v=1719958520"},{"product_id":"fretz-revere-r-gf-goldsmithing-crosspein-hammer","title":"Fretz Revere R-GF Goldsmithing\/Crosspein Hammer","description":"\u003cp\u003e\u003cem\u003eFrom Alan Revere:\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003e\"This is my signature combination of two essential hammer faces. It is ideal for small forging projects. The cross peen is used to stretch metal in one direction when forging. The goldsmithing face is used for radial forging, moving metal outward in all directions, as well as planishing to remove marks left by the cross peen. Both faces can be used to produce attractive textures. There is no need to polish either end, just keep them tidy with Scotch Brite® or 220 abrasive paper. Unless this hammer is the final tool to touch the work, there is no need to polish. This hammer is required for classes at the Revere Academy of Jewelry Arts in San Francisco, California.\"\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eThe Fretz Revere R-GF Goldsmithing\/Crosspein Hammer combines two essential hammer faces into one precisely balanced tool. The head is notably compact yet surprisingly hefty, delivering confident feel and control during small forging projects. The domed goldsmithing face is shaped for precise radial forging — moving metal outward in all directions — and for planishing to remove marks left by the cross peen. The cross peen face is larger than the riveting end found on the Revere Chasing Hammer, making it well suited for raising and texturing work.\u003c\/p\u003e\u003cp\u003eThe handle is round rather than pistol-shaped, a deliberate choice for added sturdiness. Unlike the smooth, polished handles found on other Fretz hammers, the Revere handle features a distinctive, deep texture developed to Alan Revere's exact specifications — the same philosophy behind the textured Revere Pliers — providing enhanced sensitivity and grip during use.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSignature dual-face design combining a domed goldsmithing face and a cross peen face\u003c\/li\u003e\n\u003cli\u003eDomed goldsmithing face ideal for radial forging and planishing\u003c\/li\u003e\n\u003cli\u003eCross peen face sized for raising and texturing — larger than the riveting end on the Revere Chasing Hammer\u003c\/li\u003e\n\u003cli\u003eCompact yet hefty head with excellent balance in the hand\u003c\/li\u003e\n\u003cli\u003eDistinctive deep-textured round handle engineered to Alan Revere's specifications for enhanced grip sensitivity\u003c\/li\u003e\n\u003cli\u003eRound handle profile chosen over pistol grip for greater sturdiness\u003c\/li\u003e\n\u003cli\u003eRequired hammer for classes at the Revere Academy of Jewelry Arts, San Francisco, California\u003c\/li\u003e\n\u003cli\u003eFaces can be maintained with Scotch Brite® or 220 abrasive paper — no polishing required unless the hammer is the final tool to touch the work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFace Shape\u003c\/td\u003e\n\u003ctd\u003eRectangular \/ Round\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFace Sizes\u003c\/td\u003e\n\u003ctd\u003e15 x 4mm \u0026amp; 15mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall Length\u003c\/td\u003e\n\u003ctd\u003e9-1\/8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHead Length\u003c\/td\u003e\n\u003ctd\u003e77mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHead Type\u003c\/td\u003e\n\u003ctd\u003eGoldsmithing \/ Crosspein\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHead Weight\u003c\/td\u003e\n\u003ctd\u003e2.7 oz. (77g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eVietnam\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Fretz","offers":[{"title":"Default Title","offer_id":43579703460054,"sku":"137.171","price":77.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/fretz-revere-r-gf-goldsmithingcrosspein-hammer-otto-frei-1.jpg?v=1719958500"},{"product_id":"fretz-hmr-22-sandstone-texturing-hammer","title":"Fretz HMR-22 Sandstone Texturing Hammer","description":"\u003cp\u003eThe Fretz HMR-22 Sandstone Texturing Hammer delivers a distinctive crosshatch surface texture on soft metals including gold, copper, and silver. Part of the renowned Fretz Jewelers Hammers line, this hammer is sized between the smaller Fretz Precisionsmith series and the larger Fretz Silversmithing series—making it the go-to choice for a wide range of metalsmithing and jewelry-forming applications.\u003c\/p\u003e\n\n\u003cp\u003eFretz hammers are recognized for two defining qualities: the handle and the head. Together, they create a tool that is as comfortable in the hand as it is precise in use.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSandstone crosshatch texturing face\u003c\/strong\u003e produces a rich, consistent surface texture on soft metals such as gold, silver, and copper\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHandle crafted from African Padauk\u003c\/strong\u003e (a type of Rosewood) for a smooth, well-balanced feel—handle weight is proportioned to head weight for optimal balance\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHammer head cast in 420 stainless steel\u003c\/strong\u003e and hardened to 50Rc for long-lasting durability and performance\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHighly polished head\u003c\/strong\u003e reduces marring on workpieces and maintains surface quality over time\u003c\/li\u003e\n  \u003cli\u003eHandle color may vary from dark brown to lighter shades depending on Fretz's sourcing of recycled Asian Padauk—finish quality is consistent regardless of shade\u003c\/li\u003e\n  \u003cli\u003eSimilar in size and profile to other hammers in the Fretz Jewelers Hammers line\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eFretz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eHMR-22\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHead Type\u003c\/th\u003e\n\u003ctd\u003eTexturing\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFace Shape\u003c\/th\u003e\n\u003ctd\u003eFlat \/ Textured (Sandstone Crosshatch)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFace Size\u003c\/th\u003e\n\u003ctd\u003e19.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHead Length\u003c\/th\u003e\n\u003ctd\u003e75mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHead Weight\u003c\/th\u003e\n\u003ctd\u003e3.1 oz. (88g)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eOverall Length\u003c\/th\u003e\n\u003ctd\u003e9\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHead Material\u003c\/th\u003e\n\u003ctd\u003e420 Stainless Steel, hardened to 50Rc\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHandle Material\u003c\/th\u003e\n\u003ctd\u003eAfrican Padauk (Rosewood family)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCountry of Origin\u003c\/th\u003e\n\u003ctd\u003eVietnam\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Fretz","offers":[{"title":"Default Title","offer_id":43579737571542,"sku":"137.216","price":73.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/fretz-hmr-22-sandstone-texturing-hammer-otto-frei-1.jpg?v=1719958484"},{"product_id":"fretz-revere-r-cr-chasing-riveting-hammer","title":"Fretz Revere R-CR Chasing\/Riveting Hammer","description":"\u003cp\u003eDesigned in collaboration with master jeweler Alan Revere, the Fretz Revere R-CR Chasing\/Riveting Hammer combines two purpose-built faces into a single, well-balanced tool for jewelry making. As Alan Revere describes it: \u003cem\u003e\"Essential for jewelry making, this hammer combines two faces, which are used in different operations. The chasing face is used to strike tools only, not jewelry. Use it for center punches, chasing punches, etc. The surface is not maintained and will show marks and dings, which is fine because this tool is not used on jewelry metals themselves. The riveting face is a small cross peen. It is ideal for upsetting, or spreading the ends of rivets when cold-joining metals. The hammer needs no maintenance.\"\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eThe round chasing face measures \u003cstrong\u003e25mm (approximately 1\") in diameter\u003c\/strong\u003e and is \u003cstrong\u003eflat, not domed\u003c\/strong\u003e — a deliberate design choice, as a domed face can allow a strike to slide off its intended target. The face carries a standard machine finish rather than a high-polish surface, a practical decision since the chasing end is used to strike tools, not jewelry metals directly.\u003c\/p\u003e\u003cp\u003eThe opposite face is a \u003cstrong\u003ecross peen riveting head\u003c\/strong\u003e measuring 10 x 2mm, ideal for upsetting and spreading rivet ends when cold-joining metals. Beyond riveting, this cross peen can also be used for texturing and light-duty raising — a more versatile choice than a traditional ball peen, in Mr. Revere's view.\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003epistol-shaped handle is intentionally thinner\u003c\/strong\u003e than those found on most contemporary hammers, providing excellent balance and sensitivity in the hand. The handle features a \u003cstrong\u003edistinctive deep texture\u003c\/strong\u003e developed to Alan Revere's exact specifications — unlike the smooth, polished handles found on other Fretz hammers, this texture enhances feel and control during use.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDual-face design: flat round chasing face and cross peen riveting face\u003c\/li\u003e\n\u003cli\u003eFlat 25mm chasing face prevents glancing strikes on tool heads\u003c\/li\u003e\n\u003cli\u003eStandard machine finish on chasing face — practical for tool-striking work\u003c\/li\u003e\n\u003cli\u003eCross peen face suited for riveting, texturing, and light raising\u003c\/li\u003e\n\u003cli\u003eThin pistol-grip handle for superior balance and hand sensitivity\u003c\/li\u003e\n\u003cli\u003eDeeply textured handle surface developed to Alan Revere's specifications\u003c\/li\u003e\n\u003cli\u003eNo maintenance required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eMaker\u003c\/th\u003e\n\u003ctd\u003eFretz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eR-CR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead Type\u003c\/th\u003e\n\u003ctd\u003eCombination (Chasing \/ Riveting)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFace Shape\u003c\/th\u003e\n\u003ctd\u003eRound (chasing) \/ Rectangular cross peen (riveting)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFace Sizes\u003c\/th\u003e\n\u003ctd\u003e25mm round \u0026amp; 10 x 2mm cross peen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead Length\u003c\/th\u003e\n\u003ctd\u003e60mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead Weight\u003c\/th\u003e\n\u003ctd\u003e2.1 oz. (60g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall Length\u003c\/th\u003e\n\u003ctd\u003e9-3\/8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCountry of Origin\u003c\/th\u003e\n\u003ctd\u003eVietnam\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eNotes\u003c\/h3\u003e\u003cp\u003eThe chasing face is intended exclusively for striking tools such as center punches and chasing punches — not for direct contact with jewelry metals. Surface marks and dings on the chasing face are normal and expected with use.\u003c\/p\u003e","brand":"Fretz","offers":[{"title":"Default Title","offer_id":43579749204182,"sku":"137.170","price":73.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/fretz-revere-r-cr-chasingriveting-hammer-otto-frei-1.jpg?v=1719958479"},{"product_id":"fretz-sh-1-jewelers-sledge-hammer","title":"Fretz SH-1 Jewelers Sledge Hammer","description":"\u003cp\u003eThe Fretz SH-1 Jewelers Sledge Hammer is the largest hammer in the Fretz line — a serious forging tool designed by Bill and Jordan Fretz for moving heavy wire, rod, and sheet metal with authority. The massive 5-3\/8\" (135mm) polished stainless steel head sits on a thicker axe-style handle crafted from Padauk hardwood, smoothly finished for a refined, professional feel in the hand.\u003c\/p\u003e\u003cp\u003eThe head profile is modeled after a modified goldsmith's hammer, featuring a round 1-1\/8\" (27mm) diameter striking face on one end and a 1\" x 1\/4\" (25mm x 6mm) cross-peen wedge on the other. The round face is intentionally sized so the workpiece remains visible as the hammer descends — a thoughtful design detail that improves accuracy during heavy forging work. The cross-peen end is used with a choked-up grip, providing a comfortable hold and the precision needed for controlled, directional metal movement.\u003c\/p\u003e\u003cp\u003eAt 1.65 lbs. (0.75 kg), the weight of the head does most of the work, reducing fatigue during extended forging sessions. The curved handle geometry complements the hammer's balance, making it easier to control despite its substantial mass.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eFrom Bill Fretz: \"The Fretz Jewelers Sledge Hammer is designed for forging heavy wire, rod, or sheet. The relatively small round face on a large hammer is designed so the work is visible as the hammer is descending towards the project. The curved handle makes the hammer easy to hold while the weight of the head does most of the work. The craftsperson chokes up on the handle while using the cross-peen end. This gives a comfortable holding position while the shorter grip helps with hammering accuracy needed with the cross-peen end.\"\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLargest hammer in the Fretz line — built for heavy forging applications\u003c\/li\u003e\n\u003cli\u003ePolished stainless steel head with modified goldsmith's profile\u003c\/li\u003e\n\u003cli\u003eRound 27mm striking face keeps workpiece visible during descent\u003c\/li\u003e\n\u003cli\u003eCross-peen wedge end (25mm x 6mm) for directional metal movement\u003c\/li\u003e\n\u003cli\u003eAxe-style Padauk hardwood handle, smoothly finished\u003c\/li\u003e\n\u003cli\u003eCurved handle geometry promotes comfortable grip and natural swing\u003c\/li\u003e\n\u003cli\u003eHead weight does the work — reduces hand and wrist fatigue\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eSH-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead Material\u003c\/th\u003e\n\u003ctd\u003ePolished stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHandle Material\u003c\/th\u003e\n\u003ctd\u003ePadauk hardwood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead Length\u003c\/th\u003e\n\u003ctd\u003e135mm (5-3\/8\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall Length\u003c\/th\u003e\n\u003ctd\u003e11-3\/8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead Weight\u003c\/th\u003e\n\u003ctd\u003e1.65 lbs. (0.75 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRound Face Diameter\u003c\/th\u003e\n\u003ctd\u003e27mm (1-1\/8\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCross-Peen Face\u003c\/th\u003e\n\u003ctd\u003e25mm x 6mm (1\" x 1\/4\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead Type\u003c\/th\u003e\n\u003ctd\u003eForming\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCountry of Origin\u003c\/th\u003e\n\u003ctd\u003eVietnam\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Fretz","offers":[{"title":"Default Title","offer_id":43579750351062,"sku":"137.229","price":127.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/fretz-sh-1-jewelers-sledge-hammer-otto-frei-1.jpg?v=1719958479"},{"product_id":"fretz-bh-1-blowhorn-t-stake-8in-420-stainless","title":"Fretz BH-1 Large Blowhorn T-Stake - 8\" Across","description":"\u003cp\u003eThe \u003cstrong\u003eFretz BH-1 Large Blowhorn T-Stake\u003c\/strong\u003e measures 8\" (223mm) from tip to tip, making it an ideal forming tool for traditional silversmithing work on full-size vessels and other large-format pieces. Cast from 420 stainless steel and hardened to 50 HRC — the same grade and hardness used in all Fretz hammers — this stake delivers the durability and surface quality that professional metalsmiths demand.\u003c\/p\u003e\u003cp\u003eUnlike most cast iron silversmith stakes, the BH-1 resists denting and will not rust. The highly polished working surface helps produce smooth, refined forms without unwanted texture transfer. Compatible with Fretz stake holders 112.720 and 112.721, this stake is designed to be mounted to a stump or heavy workbench for optimal performance, reducing bounce and minimizing arm fatigue during extended forming sessions.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e8\" (223mm) tip-to-tip length for large-format forming work\u003c\/li\u003e\n\u003cli\u003eCast from 420 stainless steel — same grade as all Fretz hammers\u003c\/li\u003e\n\u003cli\u003eHardened to 50 HRC for long-lasting durability\u003c\/li\u003e\n\u003cli\u003eHighly polished surface for smooth metalsmithing results\u003c\/li\u003e\n\u003cli\u003eResists denting and rust — outlasts traditional cast iron stakes\u003c\/li\u003e\n\u003cli\u003eCompatible with Fretz stake holders 112.720 and 112.721\u003c\/li\u003e\n\u003cli\u003eBest used mounted to a stump or heavy workbench to reduce bounce and arm fatigue\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eBH-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTip-to-Tip Length\u003c\/th\u003e\n\u003ctd\u003e8\" (223mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e420 Stainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHardness\u003c\/th\u003e\n\u003ctd\u003e50 HRC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHighly polished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Stake Holders\u003c\/th\u003e\n\u003ctd\u003e112.720, 112.721\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Fretz","offers":[{"title":"Default Title","offer_id":43579760967894,"sku":"112.755","price":325.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/fretz-bh-1-large-blowhorn-t-stake-8-across-otto-frei.jpg?v=1719958466"},{"product_id":"fretz-r-101-raising-t-stake-7in-420-stainless","title":"Fretz R-101 Large Raising T-Stake-7\" Across","description":"\u003cp\u003eThe \u003cstrong\u003eFretz R-101 Large Raising T-Stake\u003c\/strong\u003e is a professional-grade forming stake designed for traditional silversmithing and large-format metalwork. Measuring \u003cstrong\u003e7\" (178 mm) tip to tip\u003c\/strong\u003e, this stake provides the working surface needed to raise full-size vessels and other substantial hollow forms. Cast from \u003cstrong\u003e420 stainless steel\u003c\/strong\u003e and hardened to \u003cstrong\u003e50 HRC\u003c\/strong\u003e, the R-101 resists denting and rust — common issues with traditional cast iron stakes — and shares the same material standard as the full line of Fretz hammers.\u003c\/p\u003e\n\u003cp\u003eThe highly polished working surface helps produce clean, consistent results during raising operations. For optimal performance, reduced bounce, and less arm fatigue, Fretz recommends mounting the stake in a \u003cstrong\u003eFretz stake holder (112.720)\u003c\/strong\u003e secured to a stump or heavy workbench.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e7\" (178 mm) tip-to-tip length for large-format raising work\u003c\/li\u003e\n\u003cli\u003eCast 420 stainless steel construction — same grade as Fretz hammers\u003c\/li\u003e\n\u003cli\u003eHardened to 50 HRC for lasting durability and dent resistance\u003c\/li\u003e\n\u003cli\u003eHighly polished working surface for clean forming results\u003c\/li\u003e\n\u003cli\u003eResists rust without the maintenance demands of cast iron stakes\u003c\/li\u003e\n\u003cli\u003eCompatible with Fretz stake holders 112.720 and 112.721\u003c\/li\u003e\n\u003cli\u003eSuitable for raising full-size vessels and other large hollow forms\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eR-101\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTip-to-Tip Length\u003c\/th\u003e\n\u003ctd\u003e7\" (178 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e420 stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHardness\u003c\/th\u003e\n\u003ctd\u003e50 HRC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHighly polished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Stake Holders\u003c\/th\u003e\n\u003ctd\u003e112.720, 112.721\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eFor best results and to reduce bounce and arm fatigue, mount the stake in a \u003cstrong\u003eFretz stake holder 112.720\u003c\/strong\u003e secured to a stump or heavy workbench. Stake holder sold separately.\u003c\/p\u003e","brand":"Fretz","offers":[{"title":"Default Title","offer_id":43579793768662,"sku":"112.618","price":287.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/fretz-r-101-large-raising-t-stake-7-across-otto-frei.jpg?v=1719958453"},{"product_id":"fretz-r-102-tapered-raising-t-stake-7in-420-stainless","title":"Fretz R-102 Large Tapered Raising T-Stake-7\" Across","description":"\u003cp\u003eThe Fretz R-102 Large Tapered Raising T-Stake is a professional-grade forming tool measuring 7\" (178 mm) tip to tip, designed for traditional silversmithing and large-format metalwork. With undercut and rolled ends, this stake excels at forming full-size vessels and other substantial hollow forms, giving experienced metalsmiths the control and surface quality demanded by serious raising work.\u003c\/p\u003e\n\n\u003cp\u003eCast from 420 stainless steel and hardened to 50 HRC — the same grade and hardness used across the Fretz hammer line — the R-102 resists denting and corrosion that commonly affect cast iron silversmithing stakes. The highly polished working surfaces help produce smooth, refined forms without unwanted texture transfer.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eUndercut and rolled ends suited for traditional raising and forming of large hollow vessels\u003c\/li\u003e\n  \u003cli\u003eCast 420 stainless steel construction — resists denting, rust, and wear\u003c\/li\u003e\n  \u003cli\u003eHardened to 50 HRC for long-term durability under repeated hammer blows\u003c\/li\u003e\n  \u003cli\u003eHighly polished surfaces for refined metalwork results\u003c\/li\u003e\n  \u003cli\u003eCompatible with Fretz stake holders 112.720 and 112.721\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eFretz R-102\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eOverall Length\u003c\/th\u003e\n\u003ctd\u003e7\" (178 mm) tip to tip\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e420 stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHardness\u003c\/th\u003e\n\u003ctd\u003e50 HRC\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHighly polished\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCompatible Stake Holders\u003c\/th\u003e\n\u003ctd\u003e112.720, 112.721\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eFor best results and to reduce bounce and arm fatigue, use the Fretz stake holder 112.720 mounted to a stump or heavy work bench.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"Fretz","offers":[{"title":"Default Title","offer_id":43579794063574,"sku":"112.619","price":275.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/fretz-r-102-large-tapered-raising-t-stake-7-across-otto-frei.jpg?v=1719958453"},{"product_id":"fretz-e-101-extended-holder-100-series-stakes","title":"Fretz E-101 Extended Holder For 100 Series Stakes","description":"\u003cp\u003eThe Fretz E-101 Extended Holder gives you significantly more working clearance beneath your 100 Series stakes, effectively transforming them into tall mushroom stakes. Designed to work with either the H-101 Large Holder for Workbench or Tabletop or the VH-101 Large Vise Holder, this extension raises your stake height so you can access interior surfaces — such as the bottom of a vase or hollow form — from the inside. An essential addition for jewelers and metalsmiths working on pieces that require reach and clearance that standard stake holders cannot provide.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExtends working height of 100 Series stakes for greater clearance beneath the stake head\u003c\/li\u003e\n\u003cli\u003eTransforms 100 Series stakes into tall mushroom-style stakes\u003c\/li\u003e\n\u003cli\u003eEnables interior surface access on hollow forms such as vase bottoms\u003c\/li\u003e\n\u003cli\u003eCompatible with the H-101 Large Holder for Workbench or Tabletop and the VH-101 Large Vise Holder\u003c\/li\u003e\n\u003cli\u003eTapered square profile seats securely in compatible holders\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e5-1\/8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTop Dimension\u003c\/th\u003e\n\u003ctd\u003e7\/8\" square\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBottom Dimension\u003c\/th\u003e\n\u003ctd\u003e1\/2\" square\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Holder Series\u003c\/th\u003e\n\u003ctd\u003eH-101, VH-101\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Stake Series\u003c\/th\u003e\n\u003ctd\u003eFretz 100 Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVariant Count\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eThe E-101 Extended Holder requires a compatible H-101 or VH-101 stake holder (sold separately) and is designed exclusively for use with Fretz 100 Series stakes (sold separately).\u003c\/p\u003e","brand":"Fretz","offers":[{"title":"Default Title","offer_id":43580398239958,"sku":"112.724","price":79.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/fretz-e-101-extended-holder-for-100-series-stakes-otto-frei.jpg?v=1719958125"},{"product_id":"fretz-e-100-extractor-wedge-100-series-stakes","title":"Fretz E-100 Extractor Wedge For 100 Series Stakes","description":"\u003cp\u003eThe Fretz E-100 Extractor Wedge is designed to work with the E-101 Extended Holder for 100 Series Stakes. The wedge fits into the oval hole in the E-101 holder and is used to remove any M-100 series stake from the holder by tapping the wedge end—providing a clean, controlled method for changing stakes without damaging the holder or stake shank.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFits the oval hole in the E-101 Extended Holder\u003c\/li\u003e\n\u003cli\u003eDesigned to remove M-100 series stakes from the E-101 holder\u003c\/li\u003e\n\u003cli\u003eStake removal is accomplished by tapping the wedge end\u003c\/li\u003e\n\u003cli\u003ePurpose-built accessory for use within the Fretz 100 Series staking system\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eThe E-100 Extractor Wedge is compatible with the \u003cstrong\u003eE-101 Extended Holder for 100 Series Stakes\u003c\/strong\u003e and is used to extract any stake from the \u003cstrong\u003eM-100 series\u003c\/strong\u003e.\u003c\/p\u003e","brand":"Fretz","offers":[{"title":"Default Title","offer_id":43580399288534,"sku":"112.725","price":31.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/fretz-e-100-extractor-wedge-for-100-series-stakes-otto-frei.jpg?v=1719958125"},{"product_id":"fretz-micro-mushroom-stake-set-3","title":"Fretz Micro Mushroom Stake Set Of 3","description":"\u003cp\u003eThe Fretz Micro Mushroom Stake Set of 3 gives jewelers and metalsmiths a precisely matched trio of miniature forming stakes for working small-scale metal forms with accuracy and control. Each stake features a highly polished hardened stainless steel head, delivering a smooth, reflective surface that minimizes marring and produces clean, consistent results when shaping fine metalwork.\u003c\/p\u003e\n\n\u003cp\u003eThis set includes one each of the 3mm, 4mm, and 5mm micro mushroom stakes — covering a graduated range ideal for forming small domes, bezels, granulation effects, and other detailed metalsmithing work. These stakes are only available as a set of 3 and are not sold individually.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHighly polished hardened stainless steel heads for smooth, mark-free forming\u003c\/li\u003e\n\u003cli\u003eMushroom profile designed for doming, rounding, and shaping small metal forms\u003c\/li\u003e\n\u003cli\u003eGraduated sizes — 3mm, 4mm, and 5mm — provide precise control over a range of forming tasks\u003c\/li\u003e\n\u003cli\u003eSold exclusively as a set of 3; individual stakes are not available separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eHardened stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHighly polished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSet Quantity\u003c\/th\u003e\n\u003ctd\u003e3 stakes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStake Profile\u003c\/th\u003e\n\u003ctd\u003eMicro mushroom\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eA-1\u003c\/strong\u003e – Micro Mushroom 3mm Stake\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA-2\u003c\/strong\u003e – Micro Mushroom 4mm Stake\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA-3\u003c\/strong\u003e – Micro Mushroom 5mm Stake\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fretz","offers":[{"title":"Default Title","offer_id":43580646424790,"sku":"112.635A","price":61.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/fretz-micro-mushroom-stake-set-of-3-otto-frei.jpg?v=1719958058"},{"product_id":"fretz-h2-i1-high-dome-insert-stake-4-7mm","title":"Fretz H-2 i Series Stake i-1","description":"\u003cp\u003eThe Fretz H-2 i-1 is a High Dome Insert Stake with a 4.7mm diameter, part of the Fretz H-2 i Series of insert stakes. Designed for professional jewelers and metalsmiths, this precision-formed stake delivers consistent, high-quality doming results on small-scale work. Like all Fretz stakes, it is crafted from 420 stainless steel and finished to a high polish for a smooth, mark-free working surface.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh dome profile for forming small, precise curves\u003c\/li\u003e\n\u003cli\u003e4.7mm diameter insert stake\u003c\/li\u003e\n\u003cli\u003ePart of the Fretz H-2 i Series insert stake system\u003c\/li\u003e\n\u003cli\u003e420 stainless steel construction for durability and corrosion resistance\u003c\/li\u003e\n\u003cli\u003eHighly polished surface helps prevent tool marks on metal\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eHigh Dome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e4.7mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eFretz H-2 i Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStake Designation\u003c\/th\u003e\n\u003ctd\u003ei-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e420 Stainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHigh Polish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Fretz","offers":[{"title":"Default Title","offer_id":43580647801046,"sku":"112.662-1","price":27.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/fretz-h-2-i-series-stake-i-1-otto-frei.jpg?v=1719958058"},{"product_id":"fretz-h2-i10-taper-insert-stake","title":"Fretz H-2 i Series Stake i-10","description":"\u003cp\u003eThe Fretz H-2 i-10 is a taper insert stake from the Fretz H-2 i Series, designed for precision forming work in jewelry making and metalsmithing. Measuring 35mm tall with a profile of 4mm × 13.8mm, this compact taper stake delivers the control and surface quality that professional metalsmiths demand. Crafted from 420 stainless steel with a high-polish finish, it resists corrosion and maintains a smooth working surface that won't mar your metal.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTaper profile ideal for detailed forming and shaping tasks\u003c\/li\u003e\n\u003cli\u003eConstructed from 420 stainless steel for durability and corrosion resistance\u003c\/li\u003e\n\u003cli\u003eHighly polished surface finish to protect workpiece metal\u003c\/li\u003e\n\u003cli\u003ePart of the Fretz H-2 i Series insert stake system\u003c\/li\u003e\n\u003cli\u003eCompact 35mm height suited for precision, small-scale work\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eStake Type\u003c\/th\u003e\n\u003ctd\u003eTaper Insert Stake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eFretz H-2 i Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e35mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProfile Dimensions\u003c\/th\u003e\n\u003ctd\u003e4mm × 13.8mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e420 Stainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHighly Polished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Fretz","offers":[{"title":"Default Title","offer_id":43580648653014,"sku":"112.662-10","price":32.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/fretz-h-2-i-series-stake-i-10-otto-frei.jpg?v=1719958059"},{"product_id":"fretz-h2-i11-taper-insert-stake","title":"Fretz H-2 i Series Stake i-11","description":"\u003cp\u003eThe Fretz H-2 i-11 is a taper insert stake from the Fretz H-2 i Series, designed for precision forming work in professional metalsmithing and jewelry fabrication. Measuring 21mm tall x 3mm x 19mm, this compact taper stake delivers the accuracy and surface quality that demanding bench work requires. Crafted from 420 stainless steel with a high-polish finish, it provides a smooth working surface that helps maintain the integrity of metal as it is shaped and formed.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTaper insert stake profile ideal for detailed forming and shaping tasks\u003c\/li\u003e\n\u003cli\u003eConstructed from 420 stainless steel for durability and corrosion resistance\u003c\/li\u003e\n\u003cli\u003eHighly polished working surface minimizes surface marks on metal\u003c\/li\u003e\n\u003cli\u003ePart of the Fretz H-2 i Series insert stake system\u003c\/li\u003e\n\u003cli\u003eCompact dimensions suit precise, controlled metalsmithing applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eStyle\u003c\/th\u003e\n\u003ctd\u003eTaper Insert Stake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eFretz H-2 i Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003ei-11\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e21mm tall x 3mm x 19mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e420 Stainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHighly Polished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Fretz","offers":[{"title":"Default Title","offer_id":43580649210070,"sku":"112.662-11","price":32.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/fretz-h-2-i-series-stake-i-11-otto-frei.jpg?v=1719958058"},{"product_id":"fretz-i-14-hook-insert-stake-6mm","title":"Fretz H-2 i Series Stake i-14","description":"\u003cp\u003eThe Fretz i-14 is a 6.0mm Hook Insert Stake from the H-2 i Series, designed for precise forming and shaping work in professional jewelry and metalsmithing applications. Like all stakes in the Fretz insert series, the i-14 is crafted from 420 stainless steel with a high-polish finish, delivering the smooth, refined surface quality that bench jewelers and metalsmiths depend on for consistent results.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHook profile insert stake ideal for forming curved and hooked forms\u003c\/li\u003e\n\u003cli\u003ePart of the Fretz H-2 i Series interchangeable insert stake system\u003c\/li\u003e\n\u003cli\u003eConstructed from 420 stainless steel for durability and corrosion resistance\u003c\/li\u003e\n\u003cli\u003eHighly polished surface finish to prevent marring workpieces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003ei-14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eFretz H-2 i Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eHook Insert Stake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e6.0mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e420 Stainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHighly Polished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Fretz","offers":[{"title":"Default Title","offer_id":43580649767126,"sku":"112.662-14","price":27.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/fretz-h-2-i-series-stake-i-14-otto-frei-1.jpg?v=1719958053"},{"product_id":"fretz-h2-i2-high-dome-insert-stake","title":"Fretz H-2 i Series Stake i-2","description":"\u003cp\u003eThe Fretz i-2 is a \u003cstrong\u003eHigh Dome Insert Stake with a 5.7mm dome\u003c\/strong\u003e, part of the Fretz H-2 i Series insert stake system. Designed for professional jewelers and metalsmiths, this precision insert stake delivers consistent, repeatable forming results for domed and curved metalwork. Like all Fretz stakes, the i-2 is crafted from \u003cstrong\u003e420 stainless steel\u003c\/strong\u003e and features a high-polish surface finish that transfers cleanly to metal without marring or scratching your workpiece.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh dome profile with a 5.7mm dome diameter\u003c\/li\u003e\n\u003cli\u003ePart of the Fretz H-2 i Series insert stake system\u003c\/li\u003e\n\u003cli\u003eConstructed from 420 stainless steel for durability and corrosion resistance\u003c\/li\u003e\n\u003cli\u003eHighly polished surface minimizes surface transfer marks on workpieces\u003c\/li\u003e\n\u003cli\u003ePrecision-ground profile for consistent forming results\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eHigh Dome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDome Diameter\u003c\/th\u003e\n\u003ctd\u003e5.7mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eFretz H-2 i Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e420 Stainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSurface Finish\u003c\/th\u003e\n\u003ctd\u003eHighly Polished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Fretz","offers":[{"title":"Default Title","offer_id":43580650422486,"sku":"112.662-2","price":27.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/fretz-h-2-i-series-stake-i-2-otto-frei.jpg?v=1719958053"},{"product_id":"fretz-h2-i3-high-dome-insert-stake-6-5mm","title":"Fretz H-2 i Series Stake i-3","description":"\u003cp\u003eThe Fretz i-3 is a \u003cstrong\u003eHigh Dome Insert Stake\u003c\/strong\u003e from the Fretz H-2 i Series, designed for precise doming and forming work. Measuring \u003cstrong\u003e6.5mm\u003c\/strong\u003e, this insert stake delivers the refined dome profile metalsmiths and jewelers need for controlled, repeatable results. Like all stakes in the Fretz line, the i-3 is crafted from \u003cstrong\u003e420 stainless steel\u003c\/strong\u003e and brought to a high polish, ensuring a smooth, mark-free working surface that translates directly to your metal.\u003c\/p\u003e\u003cp\u003eThe H-2 i Series insert stakes are engineered to fit the Fretz H-2 handle system, allowing you to swap forming heads quickly and efficiently at the bench. The i-3 high dome profile is ideal for raising, doming, and shaping sheet metal with accuracy and consistency.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHigh dome profile for precise doming and forming\u003c\/li\u003e\n\u003cli\u003e6.5mm dome diameter\u003c\/li\u003e\n\u003cli\u003eManufactured from 420 stainless steel\u003c\/li\u003e\n\u003cli\u003eHighly polished working surface for mark-free results\u003c\/li\u003e\n\u003cli\u003eDesigned as an insert for the Fretz H-2 handle system\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eFretz H-2 i Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStake Model\u003c\/th\u003e\n\u003ctd\u003ei-3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eHigh Dome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDome Diameter\u003c\/th\u003e\n\u003ctd\u003e6.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e420 Stainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHigh Polish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Fretz","offers":[{"title":"Default Title","offer_id":43580651274454,"sku":"112.662-3","price":27.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/fretz-h-2-i-series-stake-i-3-otto-frei.jpg?v=1719958053"},{"product_id":"fretz-h2-i4-high-dome-insert-stake-8-5mm","title":"Fretz H-2 i Series Stake i-4","description":"\u003cp\u003eThe Fretz H-2 i Series Stake i-4 is a High Dome Insert Stake designed for precise metal forming work. Machined from 420 stainless steel and finished to a high polish, this insert stake delivers the smooth, refined surface quality that professional jewelers and metalsmiths demand when shaping and doming metal.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh dome profile ideal for forming and shaping curved metal surfaces\u003c\/li\u003e\n\u003cli\u003eMachined from 420 stainless steel for durability and corrosion resistance\u003c\/li\u003e\n\u003cli\u003eHighly polished working surface to minimize tool marks on metal\u003c\/li\u003e\n\u003cli\u003eInsert-style stake designed for use with the Fretz H-2 handle system\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eStyle\u003c\/th\u003e\n\u003ctd\u003eHigh Dome Insert Stake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDome Diameter\u003c\/th\u003e\n\u003ctd\u003e8.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e420 Stainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHighly Polished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eFretz H-2 i Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003ei-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Fretz","offers":[{"title":"Default Title","offer_id":43580651831510,"sku":"112.662-4","price":32.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/fretz-h-2-i-series-stake-i-4-otto-frei.jpg?v=1719958054"},{"product_id":"fretz-i5-high-dome-insert-stake-10-5mm","title":"Fretz H-2 i Series Stake i-5","description":"\u003cp\u003eThe Fretz i-5 is a \u003cstrong\u003eHigh Dome Insert Stake\u003c\/strong\u003e from the H-2 i Series, designed for precise doming and forming work in jewelry making and metalsmithing. With a \u003cstrong\u003e10.5mm\u003c\/strong\u003e dome diameter, this insert stake delivers controlled, consistent results on small-scale curved forms. Constructed from \u003cstrong\u003e420 stainless steel\u003c\/strong\u003e and brought to a high polish, it resists corrosion and provides a smooth working surface that won't mar or scratch metal during forming.\u003c\/p\u003e\u003cp\u003eAs part of the Fretz H-2 insert stake system, the i-5 is engineered to fit compatible Fretz handle systems, allowing multiple stake heads to share a single handle for an efficient, organized bench setup.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHigh dome profile ideal for forming and raising curved metal surfaces\u003c\/li\u003e\n\u003cli\u003e10.5mm dome diameter for precise small-scale forming work\u003c\/li\u003e\n\u003cli\u003eManufactured from 420 stainless steel for durability and corrosion resistance\u003c\/li\u003e\n\u003cli\u003eHighly polished working surface to protect metal finish during use\u003c\/li\u003e\n\u003cli\u003ePart of the Fretz H-2 i Series insert stake system\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eFretz H-2 i Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStake Type\u003c\/th\u003e\n\u003ctd\u003eHigh Dome Insert Stake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDome Diameter\u003c\/th\u003e\n\u003ctd\u003e10.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e420 Stainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHigh Polish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVariant Count\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Fretz","offers":[{"title":"Default Title","offer_id":43580652617942,"sku":"112.662-5","price":32.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/fretz-h-2-i-series-stake-i-5-otto-frei.jpg?v=1719958053"},{"product_id":"fretz-h2-i6-low-dome-mushroom-insert-stake","title":"Fretz H-2 i Series Stake i-6","description":"\u003cp\u003eThe Fretz H-2 i-6 is a \u003cstrong\u003eLow Dome Mushroom Insert Stake\u003c\/strong\u003e measuring \u003cstrong\u003e12.0mm\u003c\/strong\u003e, part of the Fretz H-2 i Series of precision insert stakes. Designed for professional jewelers and metalsmiths, this stake delivers a gently rounded low-dome profile ideal for forming smooth, softly domed surfaces in metal sheet and hollowware work. As with all Fretz stakes, the i-6 is crafted from \u003cstrong\u003e420 stainless steel\u003c\/strong\u003e and brought to a high polish, ensuring a refined surface finish transfers cleanly to your workpiece.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLow dome mushroom profile for forming gentle, softly curved surfaces\u003c\/li\u003e\n\u003cli\u003e12.0mm working diameter for precise, controlled forming\u003c\/li\u003e\n\u003cli\u003eMade from 420 stainless steel for durability and corrosion resistance\u003c\/li\u003e\n\u003cli\u003eHighly polished surface minimizes marks transferred to metal\u003c\/li\u003e\n\u003cli\u003eInsert-style stake compatible with the Fretz H-2 handle system\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eLow Dome Mushroom\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking Diameter\u003c\/th\u003e\n\u003ctd\u003e12.0mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e420 Stainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHigh Polish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eFretz H-2 i Series Insert Stakes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStake Number\u003c\/th\u003e\n\u003ctd\u003ei-6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Fretz","offers":[{"title":"Default Title","offer_id":43580653666518,"sku":"112.662-6","price":36.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/fretz-h-2-i-series-stake-i-6-otto-frei.jpg?v=1719958051"},{"product_id":"fretz-h2-i9-taper-insert-stake","title":"Fretz H-2 i Series Stake i-9","description":"\u003cp\u003eThe Fretz i-9 is a taper insert stake from the Fretz H-2 i Series, measuring 37mm tall with a 3mm minimum width and 10.5mm maximum width. Designed for precision forming work, this insert stake is crafted from 420 stainless steel and features a highly polished surface—allowing metal to glide smoothly and reducing the risk of marring your workpiece during shaping and tapering operations.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTaper profile designed for forming tapered forms and channels in sheet metal\u003c\/li\u003e\n\u003cli\u003eHighly polished surface minimizes marring and scratching on workpieces\u003c\/li\u003e\n\u003cli\u003eMade from durable 420 stainless steel for long-lasting performance\u003c\/li\u003e\n\u003cli\u003ePart of the Fretz H-2 i Series insert stake system\u003c\/li\u003e\n\u003cli\u003eCompact size suited for detailed, small-scale forming tasks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eFretz H-2 i Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStake Type\u003c\/th\u003e\n\u003ctd\u003eTaper Insert Stake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e37mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth – Narrow End\u003c\/th\u003e\n\u003ctd\u003e3mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth – Wide End\u003c\/th\u003e\n\u003ctd\u003e10.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e420 Stainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHighly Polished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Fretz","offers":[{"title":"Default Title","offer_id":43580654289110,"sku":"112.662-9","price":32.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/fretz-h-2-i-series-stake-i-9-otto-frei.jpg?v=1719958051"},{"product_id":"fretz-h-2-micro-stake-mandrel-tool-holder","title":"Fretz H-2 Micro Stake\/Mandrel Tool Holder","description":"\u003cp\u003eThe Fretz H-2 Micro Stake\/Mandrel Tool Holder is designed to securely hold micro stakes, mini mandrels, and various i-series tools—including insert wheels—giving jewelers and metalsmiths a reliable grip on precision forming tools during metalworking operations.\u003c\/p\u003e\u003cp\u003eThe H-2 is intended for use with the Fretz H-1 Miniature Stake Holder (Otto Frei #112.600) or the Fretz H-1L Extended Reach Stake Holder (Otto Frei #112.719), making it a versatile addition to a professional forming setup.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eMandrels and tools sold separately.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHolds micro stakes, mini mandrels, and i-series tools including insert wheels\u003c\/li\u003e\n\u003cli\u003eCompatible with the Fretz H-1 Miniature Stake Holder (#112.600)\u003c\/li\u003e\n\u003cli\u003eCompatible with the Fretz H-1L Extended Reach Stake Holder (#112.719)\u003c\/li\u003e\n\u003cli\u003ePart of the Fretz precision forming tool system\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eNotes\u003c\/h3\u003e\u003cp\u003eMandrels and tools are sold separately and are not included with the H-2 Tool Holder. Refer to the Fretz H-1 (#112.600) and H-1L (#112.719) listings for compatible stake holder options.\u003c\/p\u003e","brand":"Fretz","offers":[{"title":"Default Title","offer_id":43580707209430,"sku":"112.635C","price":67.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/fretz-h-2-micro-stakemandrel-tool-holder-otto-frei.jpg?v=1719958022"},{"product_id":"fretz-h2-i12-concave-taper-insert-stake","title":"Fretz H-2 i Series Stake i-12","description":"\u003cp\u003eThe Fretz H-2 i-12 is a concave taper insert stake from the Fretz H-2 i Series, designed for precision forming work in metal. Measuring 17.5mm tall with a 4.0mm base and 29.5mm length, this compact stake delivers refined control for tapered and concave shaping tasks. Like all stakes in the Fretz lineup, the i-12 is crafted from 420 stainless steel and features a high-polish finish that protects your work surface and helps metal flow smoothly during forming.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConcave taper profile for precise interior and tapered forming\u003c\/li\u003e\n\u003cli\u003eConstructed from 420 stainless steel for durability and corrosion resistance\u003c\/li\u003e\n\u003cli\u003eHighly polished surface finish for smooth metal contact\u003c\/li\u003e\n\u003cli\u003ePart of the Fretz H-2 insert stake series for modular use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eFretz H-2 i Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStake Model\u003c\/th\u003e\n\u003ctd\u003ei-12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eConcave Taper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e17.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase Width\u003c\/th\u003e\n\u003ctd\u003e4.0mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e29.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e420 Stainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHighly Polished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Fretz","offers":[{"title":"Default Title","offer_id":43580707995862,"sku":"112.662-12","price":32.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/fretz-h-2-i-series-stake-i-12-otto-frei.jpg?v=1719958020"},{"product_id":"fretz-h2-i13-concave-taper-insert-stake","title":"Fretz H-2 i Series Stake i-13","description":"\u003cp\u003eThe Fretz H-2 i-13 is a concave taper insert stake designed for precise forming work in jewelry making and metalsmithing. Part of the Fretz H-2 i Series, this stake features a tapered profile measuring 32mm tall with a 4mm minimum and 24mm maximum width, making it well-suited for shaping curved and tapered forms with accuracy and control.\u003c\/p\u003e\n\n\u003cp\u003eCrafted from 420 stainless steel and brought to a high polish, this stake delivers a smooth working surface that helps produce clean, refined results on metal. The insert stake format is designed to work within the Fretz H-2 handle system.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConcave taper profile for shaping curved and tapered metalwork\u003c\/li\u003e\n\u003cli\u003eConstructed from 420 stainless steel for durability and resistance to corrosion\u003c\/li\u003e\n\u003cli\u003eHighly polished working surface for smooth, mark-free forming\u003c\/li\u003e\n\u003cli\u003eInsert stake design compatible with the Fretz H-2 handle system\u003c\/li\u003e\n\u003cli\u003eCompact dimensions suited to detail-oriented forming tasks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003ei-13\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eFretz H-2 i Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eConcave Taper Insert Stake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e32mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth Range\u003c\/th\u003e\n\u003ctd\u003e4mm – 24mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e420 Stainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHighly Polished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Fretz","offers":[{"title":"Default Title","offer_id":43580709339350,"sku":"112.662-13","price":44.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/fretz-h-2-i-series-stake-i-13-otto-frei.jpg?v=1719958020"},{"product_id":"fretz-h2-i7-low-dome-mushroom-insert-stake","title":"Fretz H-2 i Series Stake i-7","description":"\u003cp\u003eThe Fretz H-2 i-7 is a \u003cstrong\u003eLow Dome Mushroom Insert Stake\u003c\/strong\u003e designed for precise forming and doming work in metalsmithing and jewelry fabrication. Part of the Fretz H-2 i Series insert stake system, the i-7 features a low, rounded dome profile measuring \u003cstrong\u003e14.6mm\u003c\/strong\u003e — ideal for creating smooth, controlled curves in sheet metal and hollow forms.\u003c\/p\u003e\u003cp\u003eCrafted from \u003cstrong\u003e420 stainless steel\u003c\/strong\u003e and brought to a high polish, this stake delivers a refined working surface that minimizes tool marks during forming. The insert design allows it to be used with the compatible Fretz H-2 handle system, keeping your bench organized and your investment versatile.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLow dome mushroom profile for controlled, shallow forming\u003c\/li\u003e\n\u003cli\u003e14.6mm working diameter\u003c\/li\u003e\n\u003cli\u003eMade from 420 stainless steel for durability and corrosion resistance\u003c\/li\u003e\n\u003cli\u003eHighly polished surface minimizes marring on metal workpieces\u003c\/li\u003e\n\u003cli\u003eInsert-style stake compatible with the Fretz H-2 handle system\u003c\/li\u003e\n\u003cli\u003eSuitable for metalsmithing, jewelry fabrication, and hollowware forming\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003ei-7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eFretz H-2 i Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eLow Dome Mushroom\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking Diameter\u003c\/th\u003e\n\u003ctd\u003e14.6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e420 Stainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHigh Polish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStake Type\u003c\/th\u003e\n\u003ctd\u003eInsert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Fretz","offers":[{"title":"Default Title","offer_id":43580710289622,"sku":"112.662-7","price":36.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/fretz-h-2-i-series-stake-i-7-otto-frei.jpg?v=1719958021"},{"product_id":"fretz-h2-i8-low-dome-mushroom-insert-stake","title":"Fretz H-2 i Series Stake i-8","description":"\u003cp\u003eThe Fretz H-2 i-8 is a \u003cstrong\u003eLow Dome Mushroom Insert Stake\u003c\/strong\u003e from the Fretz H-2 i Series, designed for precise forming and doming work in professional metalsmithing and jewelry fabrication. With a 16.7mm working face, this stake delivers controlled, consistent results when raising, doming, or smoothing metal forms. Crafted from 420 stainless steel and finished to a high polish, it resists corrosion and maintains a clean surface that won't mar your work.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLow dome mushroom profile ideal for forming gentle curves and domed surfaces\u003c\/li\u003e\n\u003cli\u003e16.7mm working face diameter for precise, controlled metalwork\u003c\/li\u003e\n\u003cli\u003eMade from 420 stainless steel for durability and corrosion resistance\u003c\/li\u003e\n\u003cli\u003eHighly polished surface finish to prevent marring of metal workpieces\u003c\/li\u003e\n\u003cli\u003eInsert-style stake compatible with the Fretz H-2 i Series handle system\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eStyle\u003c\/th\u003e\n\u003ctd\u003eLow Dome Mushroom Insert Stake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStake Number\u003c\/th\u003e\n\u003ctd\u003ei-8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking Face Diameter\u003c\/th\u003e\n\u003ctd\u003e16.7mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e420 Stainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHighly Polished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eFretz H-2 i Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Fretz","offers":[{"title":"Default Title","offer_id":43580711272662,"sku":"112.662-8","price":36.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/fretz-h-2-i-series-stake-i-8-otto-frei.jpg?v=1719958020"},{"product_id":"fretz-m8-mushroom-stake-low-dome","title":"Fretz Mushroom Stake Low Dome M-8","description":"\u003cp\u003eThe Fretz M-8 Mushroom Stake Low Dome is a precision miniature forming stake designed for shaping, doming, and smoothing small-scale metalwork. Its compact 18mm round low-dome head makes it an ideal tool for jewelers and metalsmiths working on rings, bezels, small vessels, and other fine formed pieces requiring controlled, even curvature.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMiniature mushroom stake profile for small-scale forming work\u003c\/li\u003e\n\u003cli\u003eLow dome head geometry for gentle, controlled curvature\u003c\/li\u003e\n\u003cli\u003e18mm round working surface\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eM-8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStyle\u003c\/th\u003e\n\u003ctd\u003eMushroom Stake, Low Dome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking Surface Diameter\u003c\/th\u003e\n\u003ctd\u003e18mm round\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eFretz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Fretz","offers":[{"title":"Default Title","offer_id":43580828025046,"sku":"112.658","price":61.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/fretz-mushroom-stake-low-dome-m-8-otto-frei.jpg?v=1719957953"},{"product_id":"fretz-m-129-narrow-flat-bracelet-mushroom-stake","title":"Fretz M-129 Narrow Flat Bracelet Mushroom Stake","description":"\u003cp\u003eThe \u003cstrong\u003eFretz M-129 Narrow Flat Bracelet Mushroom Stake\u003c\/strong\u003e with rolled edge is a precision forming tool designed to create smooth, consistent curves on bracelets. Its narrow flat profile and mushroom-style head give metalsmiths controlled access for shaping and planishing bracelet forms with accuracy. At 1-1\/2\" length × 1\/4\" width × 1-3\/4\" height, this compact stake is ideally suited for detailed bracelet work where a broader stake would be unwieldy.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNarrow flat profile with rolled edge for creating curves on bracelets\u003c\/li\u003e\n\u003cli\u003eMushroom stake design provides controlled forming and planishing action\u003c\/li\u003e\n\u003cli\u003eCompact dimensions ideal for detailed bracelet shaping work\u003c\/li\u003e\n\u003cli\u003eCompatible with multiple Fretz stake holder systems for flexible bench mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eM-129\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e1-1\/2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e1\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e1-3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEdge Type\u003c\/th\u003e\n\u003ctd\u003eRolled edge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStake Type\u003c\/th\u003e\n\u003ctd\u003eMushroom stake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eThis stake is designed for use with Fretz stake holder systems. Mount it in the \u003cstrong\u003eFretz H-1 Miniature Stake Holder\u003c\/strong\u003e (112.600) or the \u003cstrong\u003eFretz H-1L Extended Reach Stake Holder\u003c\/strong\u003e (112.719) for standard bench or tabletop mounting. When your work requires deeper access than the H-1L provides, use this stake with the \u003cstrong\u003eFretz T-101 Double Ended Stake Holder\u003c\/strong\u003e (112.721) or the \u003cstrong\u003eFretz E-101 Extender Holder\u003c\/strong\u003e (112.726) for additional working room. Note that both the T-101 and E-101 feature larger tangs and require correspondingly larger stake holders.\u003c\/p\u003e","brand":"Fretz","offers":[{"title":"Default Title","offer_id":43580912369878,"sku":"112.729","price":53.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/fretz-m-129-narrow-flat-bracelet-mushroom-stake-otto-frei.jpg?v=1719957917"},{"product_id":"fretz-m-128-wide-flat-bracelet-mushroom-stake-36mm","title":"Fretz M-128 Wide Flat Bracelet Mushroom Stake","description":"\u003cp\u003eThe \u003cstrong\u003eFretz M-128 Wide Flat Bracelet Mushroom Stake with Rolled Edge\u003c\/strong\u003e is designed for forming flat cuff bracelets with a clean, finished rolled edge. With a working face width of 1-7\/16\" (36mm), this stake provides the broad, flat surface needed to shape and refine wide cuff bracelet forms with precision and control.\u003c\/p\u003e\u003cp\u003eThe M-128 mounts securely into compatible Fretz stake holders, making it easy to secure to a workbench or tabletop for stable, hands-free forming work. For jobs requiring deeper reach or greater access, multiple holder configurations are available to extend working room and accommodate your bench setup.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWide, flat working face with rolled edge — ideal for forming flat cuff bracelets\u003c\/li\u003e\n\u003cli\u003eWorking face width of 1-7\/16\" (36mm)\u003c\/li\u003e\n\u003cli\u003eCompatible with multiple Fretz stake holder configurations for flexible bench mounting\u003c\/li\u003e\n\u003cli\u003eDesigned for use with Fretz stake holder H-1 (112.600) or extended reach holder H-1L (112.719)\u003c\/li\u003e\n\u003cli\u003eFor deeper access, compatible with Fretz double-ended stake holder T-101 (112.721) or Fretz extender holder E-101 (112.726) — note: T-101 and E-101 have larger tangs requiring larger stake holders\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eFretz M-128\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking Face Width\u003c\/th\u003e\n\u003ctd\u003e1-7\/16\" (36mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStake Type\u003c\/th\u003e\n\u003ctd\u003eWide Flat Bracelet Mushroom Stake with Rolled Edge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVariants\u003c\/th\u003e\n\u003ctd\u003eSingle variant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eNotes\u003c\/h3\u003e\u003cp\u003eWhen using this stake with the Fretz double-ended stake holder T-101 (112.721) or the Fretz extender holder E-101 (112.726), be aware that both holders feature larger tangs and will require correspondingly larger stake holders. Verify compatibility with your existing bench setup before ordering.\u003c\/p\u003e","brand":"Fretz","offers":[{"title":"Default Title","offer_id":43580912533718,"sku":"112.759","price":53.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/fretz-m-128-wide-flat-bracelet-mushroom-stake-otto-frei.jpg?v=1719957917"},{"product_id":"fretz-vb-1-wooden-vise-block","title":"Fretz VB-1 Wooden Vise Block","description":"\u003cp\u003eThe Fretz VB-1 Wooden Vise Block is the same wooden block included with most Fretz stake sets, now available as a standalone replacement or addition. Pre-drilled holes allow it to accept the Fretz H-1 Miniature Stake Holder and the Fretz H-1L Extended Reach Stake Holder, both available separately.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-drilled to accept the Fretz H-1 Miniature Stake Holder (Otto Frei #112.600)\u003c\/li\u003e\n  \u003cli\u003ePre-drilled to accept the Fretz H-1L Extended Reach Stake Holder (Otto Frei #112.719)\u003c\/li\u003e\n  \u003cli\u003eSame block included with most Fretz stake sets\u003c\/li\u003e\n  \u003cli\u003eAvailable as a standalone purchase for replacement or supplemental use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eBlock Size\u003c\/th\u003e\n\u003ctd\u003e3\" x 2\" x 1\/2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eWood\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eFretz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eThe Fretz H-1 Miniature Stake Holder and H-1L Extended Reach Stake Holder are sold separately and are not included with this block.\u003c\/p\u003e","brand":"Fretz","offers":[{"title":"Default Title","offer_id":43580934848726,"sku":"112.601","price":23.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/fretz-vb-1-wooden-vise-block-otto-frei.jpg?v=1719957877"},{"product_id":"fretz-hmr-21-goldsmithing-hammer-rosewood","title":"Fretz HMR-21 Goldsmithing Hammer","description":"\u003cp\u003eThe \u003cstrong\u003eFretz HMR-21 Goldsmithing Hammer\u003c\/strong\u003e is modeled after popular German-made goldsmithing hammers, combining traditional form with refined craftsmanship. Bill Fretz infused elegance, beauty, and function into this classic design — delivering a hammer that is perfectly weighted at 96.4 grams and ready to use straight out of the box.\u003c\/p\u003e\u003cp\u003eUnlike most goldsmithing hammers that require reshaping or polishing before use, the HMR-21 arrives with a hammer head that is already precisely shaped and mirror-polished to professional standards. The longer handle — 11-1\/4\" end to end — echoes the proportions of traditional German goldsmithing hammers, while the beautiful rosewood handle is slightly thicker at the end for a secure, balanced grip.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModeled after traditional German goldsmithing hammer designs\u003c\/li\u003e\n\u003cli\u003ePerfectly weighted at 96.4 grams for balanced, controlled strikes\u003c\/li\u003e\n\u003cli\u003eHammer head arrives fully shaped and polished — ready to use immediately\u003c\/li\u003e\n\u003cli\u003eLonger 11-1\/4\" rosewood handle, slightly thicker at the end for improved grip and balance\u003c\/li\u003e\n\u003cli\u003eDual-face head: rounded face (16.7mm diameter) and rectangular cross-peen face (14 x 3mm)\u003c\/li\u003e\n\u003cli\u003e90mm head length provides substantial working mass\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eHMR-21\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead Type\u003c\/th\u003e\n\u003ctd\u003eGoldsmithing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFace Shape\u003c\/th\u003e\n\u003ctd\u003eRounded \/ Rectangular\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFace Sizes\u003c\/th\u003e\n\u003ctd\u003e16.7mm dia. \u0026amp; 14 x 3mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead Length\u003c\/th\u003e\n\u003ctd\u003e90mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead Weight\u003c\/th\u003e\n\u003ctd\u003e3.4 oz. (96.4g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall Length\u003c\/th\u003e\n\u003ctd\u003e11-1\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHandle Material\u003c\/th\u003e\n\u003ctd\u003eRosewood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCountry of Origin\u003c\/th\u003e\n\u003ctd\u003eVietnam\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Fretz","offers":[{"title":"Default Title","offer_id":43580938223830,"sku":"137.189","price":79.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/fretz-hmr-21-goldsmithing-hammer-otto-frei-1.jpg?v=1719957877"},{"product_id":"fretz-hmr-20m-classic-chasing-hammer-medium","title":"Fretz HMR-20M Classic Chasing Hammer Medium Model","description":"\u003cp\u003eThe Fretz HMR-20M is a medium-model classic chasing hammer designed in the tradition of the German and French chasing hammers that have been trusted by jewelers and metalsmiths for generations. This hammer features a highly polished cast stainless steel head with a slightly domed 1-1\/4\" (31mm) diameter hammer face and a ball peen end — a timeless profile suited to chasing and repoussé work.\u003c\/p\u003e\u003cp\u003eThe head is cast from 420 stainless steel and hardened to 50C on the Rockwell scale. Unlike other hammers in the Fretz line, the classic chasing hammers are designed to strike chasing tools — not to contact metal directly. As a result, some marring of the polished head face is expected during normal use and does not affect performance. Properly hardened chasing tools will show mushrooming on their striking end over time, which is a sign of correct use.\u003c\/p\u003e\u003cp\u003eThe handle is crafted from Padauk, a richly grained wood in the rosewood family, providing both comfort and a refined aesthetic. Because all Fretz hammers are hand finished, minor variations in head diameter may occur between individual hammers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cem\u003eEye protection is required when using any hammer.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eClassic chasing hammer profile inspired by traditional German and French designs\u003c\/li\u003e\n\u003cli\u003eHighly polished 420 stainless steel cast head, hardened to 50C Rockwell\u003c\/li\u003e\n\u003cli\u003eSlightly domed 1-1\/4\" (31mm) diameter hammer face with ball peen end\u003c\/li\u003e\n\u003cli\u003eDesigned for use against chasing tools — not for direct metal contact\u003c\/li\u003e\n\u003cli\u003ePadauk (rosewood-family) handle for comfort and durability\u003c\/li\u003e\n\u003cli\u003eHand finished — minor dimensional variation is inherent to the process\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eHMR-20M\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead Type\u003c\/th\u003e\n\u003ctd\u003eChasing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead Material\u003c\/th\u003e\n\u003ctd\u003e420 stainless steel, hardened to 50C Rockwell\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFace Shape\u003c\/th\u003e\n\u003ctd\u003eRounded \/ Flat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFace Sizes\u003c\/th\u003e\n\u003ctd\u003e13.2 × 6.5mm \u0026amp; 31 × 8mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead Length\u003c\/th\u003e\n\u003ctd\u003e68mm (2-5\/8\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead Weight\u003c\/th\u003e\n\u003ctd\u003e4.4 oz. (125g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall Length\u003c\/th\u003e\n\u003ctd\u003e9\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHandle Material\u003c\/th\u003e\n\u003ctd\u003ePadauk (rosewood family)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCountry of Origin\u003c\/th\u003e\n\u003ctd\u003eVietnam\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eNotes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eIntended for striking chasing tools only — not for direct contact with metal workpieces.\u003c\/li\u003e\n\u003cli\u003eMarring on the hammer face during normal use is expected and does not affect function.\u003c\/li\u003e\n\u003cli\u003eHand finishing means no two Fretz hammers are exactly alike; minor head diameter variation may occur.\u003c\/li\u003e\n\u003cli\u003eEye protection must be worn whenever this hammer is in use.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fretz","offers":[{"title":"Default Title","offer_id":43580960145622,"sku":"137.191M","price":79.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/fretz-hmr-20m-classic-chasing-hammer-medium-model-otto-frei-1.jpg?v=1719957869"},{"product_id":"fretz-h1-miniature-stake-holder","title":"Fretz H-1 Miniature Stake Holder","description":"\u003cp\u003eThe Fretz H-1 Miniature Stake Holder is a precision-made stainless steel holder designed to secure Fretz miniature stakes during forming and metalsmithing work. This is the same stake holder included with most Fretz stake sets, and it is sold complete with the stainless steel mounting hardware shown. Compatible with the Fretz wood block (112.601) or mount it to your own preferred work surface.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStainless steel construction for durability and long-term use\u003c\/li\u003e\n\u003cli\u003eIncluded with most Fretz miniature stake sets — sold here as a standalone replacement or addition\u003c\/li\u003e\n\u003cli\u003eSold complete with stainless steel mounting hardware\u003c\/li\u003e\n\u003cli\u003eCompatible with the Fretz VB-1 Wooden Vise Block (112.601)\u003c\/li\u003e\n\u003cli\u003eVersatile mounting — attach to the Fretz wood block or any suitable work surface\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHardware Included\u003c\/th\u003e\n\u003ctd\u003eStainless steel mounting hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Block\u003c\/th\u003e\n\u003ctd\u003eFretz VB-1 Wooden Vise Block (112.601)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Fretz","offers":[{"title":"Default Title","offer_id":43580972794070,"sku":"112.600","price":57.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/fretz-h-1-miniature-stake-holder-otto-frei.jpg?v=1719957860"},{"product_id":"fretz-b1-sharp-edge-flat-stake","title":"Fretz B-1 Sharp Edge Flat Stake","description":"\u003cp\u003eThe Fretz B-1 Sharp Edge Flat Stake is a precision miniature forming stake crafted from hardened stainless steel with highly polished surfaces. Designed for professional jewelers and metalsmiths, this stake is ideal for forming bezels, constructing hollow rings, and performing detailed smithing work that mirrors the techniques used with full-size stakes — scaled down for fine, small-scale fabrication.\u003c\/p\u003e\n\n\u003cp\u003eThe sharp-edge flat profile allows controlled forming along crisp, defined lines, making it a versatile tool for a wide range of bench applications. As with all quality forming tools, this stake can also be modified to suit your own custom workflows and techniques.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMiniature jewelers bezel T-stake with sharp edge flat profile\u003c\/li\u003e\n\u003cli\u003eHardened stainless steel construction for lasting durability\u003c\/li\u003e\n\u003cli\u003eHighly polished working surfaces for clean, mark-free forming\u003c\/li\u003e\n\u003cli\u003eIdeal for bezel forming, hollow ring construction, and small-scale smithing\u003c\/li\u003e\n\u003cli\u003eCan be modified for custom bench applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eB-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eSharp Edge Flat Stake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSurface Dimensions\u003c\/th\u003e\n\u003ctd\u003e83mm x 11.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eHardened stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSurface Finish\u003c\/th\u003e\n\u003ctd\u003eHighly polished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eVietnam\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Fretz","offers":[{"title":"Default Title","offer_id":43580973187286,"sku":"112.611","price":61.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/fretz-b-1-sharp-edge-flat-stake-otto-frei.jpg?v=1719957860"},{"product_id":"fretz-b2-sharp-edge-low-dome-stake","title":"Fretz B-2 Sharp Edge Low Dome Stake","description":"\u003cp\u003eThe Fretz B-2 Sharp Edge Low Dome Stake is a miniature jeweler's bezel T-stake precision-crafted from hardened stainless steel with highly polished working surfaces. Designed for forming bezels, making hollow rings, and executing fine metalsmithing work at a smaller scale, this stake delivers the same functional versatility as full-size stakes in a compact, refined form. As with any quality tool, it can be modified to suit your own custom applications.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHardened stainless steel construction for durability and long-term performance\u003c\/li\u003e\n\u003cli\u003eHighly polished surfaces to minimize marring during forming work\u003c\/li\u003e\n\u003cli\u003eIdeal for forming bezels, making hollow rings, and small-scale metalsmithing\u003c\/li\u003e\n\u003cli\u003eSharp edge low dome profile for precise forming control\u003c\/li\u003e\n\u003cli\u003eCompact miniature size suited for detailed and small-scale work\u003c\/li\u003e\n\u003cli\u003eAdaptable for custom applications as needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eB-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eSharp Edge Low Dome Stake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStyle\u003c\/th\u003e\n\u003ctd\u003eMiniature Jeweler's Bezel T-Stake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSurface Dimensions\u003c\/th\u003e\n\u003ctd\u003e80 mm × 11.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eHardened stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSurface Finish\u003c\/th\u003e\n\u003ctd\u003eHighly polished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eVietnam\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Fretz","offers":[{"title":"Default Title","offer_id":43580973875414,"sku":"112.612","price":61.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/fretz-b-2-sharp-edge-low-dome-stake-otto-frei.jpg?v=1719957860"},{"product_id":"fretz-b3-sharp-edge-high-dome-stake","title":"Fretz B-3 Sharp Edge High Dome Stake","description":"\u003cp\u003eThe Fretz B-3 Sharp Edge High Dome Stake is a precision miniature forming stake crafted from hardened stainless steel with a highly polished surface. Designed for professional jewelers and metalsmiths, this T-stake delivers the functionality of full-size forming stakes at a smaller, more refined scale — ideal for bezel forming, hollow ring construction, and detailed smithing work where control and accuracy matter.\u003c\/p\u003e\n\n\u003cp\u003eThe sharp edge and high dome profile make this stake particularly well-suited for creating crisp transitions and pronounced curves in small-scale work. As with all Fretz forming stakes, the polished working surface helps produce smooth, consistent results with minimal finishing required. The stake can also be modified for custom applications as your work demands.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHardened stainless steel construction for durability and long-term performance\u003c\/li\u003e\n\u003cli\u003eHighly polished working surface for smooth, consistent forming results\u003c\/li\u003e\n\u003cli\u003eSharp edge and high dome profile for precise curves and crisp transitions\u003c\/li\u003e\n\u003cli\u003eMiniature scale ideal for bezel forming and hollow ring construction\u003c\/li\u003e\n\u003cli\u003eSuitable for a wide range of small-scale smithing applications\u003c\/li\u003e\n\u003cli\u003eCan be modified for custom forming applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eSharp Edge High Dome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eMiniature Bezel T-Stake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking Surface\u003c\/th\u003e\n\u003ctd\u003e83mm × 11.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eHardened stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSurface Finish\u003c\/th\u003e\n\u003ctd\u003eHighly polished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCountry of Origin\u003c\/th\u003e\n\u003ctd\u003eVietnam\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Fretz","offers":[{"title":"Default Title","offer_id":43580974465238,"sku":"112.613","price":61.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/fretz-b-3-sharp-edge-high-dome-stake-otto-frei.jpg?v=1719957860"},{"product_id":"fretz-b4-sharp-edge-trillion-stake","title":"Fretz B-4 Sharp Edge Trillion Stake","description":"\u003cp\u003eThe Fretz B-4 Sharp Edge Trillion Stake is a precision miniature forming stake crafted from hardened stainless steel with highly polished surfaces. Designed for professional jewelers and metalsmiths, this stake excels at forming bezels, shaping hollow rings, and performing a wide range of smithing tasks — all on a smaller, more refined scale than standard bench stakes. The sharp-edged trillion profile makes it especially well suited for forming triangular and trilliant-shaped bezels with clean, defined lines. Like all tools in the Fretz miniature stake lineup, it can also be modified for custom metalsmithing applications.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSharp-edged trillion stake profile for precise trilliant and angular bezel forming\u003c\/li\u003e\n\u003cli\u003eHardened stainless steel construction for durability and long-term performance\u003c\/li\u003e\n\u003cli\u003eHighly polished working surfaces minimize surface marks on metal\u003c\/li\u003e\n\u003cli\u003eMiniature scale ideal for fine jewelry bezel work and hollow ring construction\u003c\/li\u003e\n\u003cli\u003eAdaptable for a wide variety of custom smithing applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eB-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eSharp Edge Trillion Stake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eHardened stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSurface Finish\u003c\/th\u003e\n\u003ctd\u003eHighly polished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSurface Dimensions\u003c\/th\u003e\n\u003ctd\u003e83mm × 11.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCountry of Origin\u003c\/th\u003e\n\u003ctd\u003eVietnam\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Fretz","offers":[{"title":"Default Title","offer_id":43580975251670,"sku":"112.614","price":61.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/fretz-b-4-sharp-edge-trillion-stake-otto-frei.jpg?v=1719957860"},{"product_id":"fretz-b5-rolled-edge-flat-stake","title":"Fretz B-5 Rolled Edge Flat Stake","description":"\u003cp\u003eThe Fretz B-5 Rolled Edge Flat Stake is a miniature forming stake crafted from hardened stainless steel with a highly polished working surface. Designed for jewelers and metalsmiths, this stake is ideal for forming bezels, making hollow rings, and performing a wide range of smithing tasks — all on a smaller, more refined scale than traditional full-size stakes allow. The rolled edge profile provides smooth, controlled forming without sharp transitions, making it well suited for delicate metalwork. As with any quality forming tool, the B-5 can also be adapted for custom applications specific to your bench work.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMiniature bezel and forming stake designed for small-scale metalsmithing\u003c\/li\u003e\n\u003cli\u003eRolled edge flat profile supports smooth bezel forming and hollow ring construction\u003c\/li\u003e\n\u003cli\u003eHardened stainless steel construction for durability and long-term performance\u003c\/li\u003e\n\u003cli\u003eHighly polished working surface minimizes surface marks on metal\u003c\/li\u003e\n\u003cli\u003eAdaptable for custom forming applications\u003c\/li\u003e\n\u003cli\u003eCompact scale suits detailed bench work where larger stakes are impractical\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eB-5 Rolled Edge Flat Stake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eHardened stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSurface Finish\u003c\/th\u003e\n\u003ctd\u003eHighly polished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking Surface Dimensions\u003c\/th\u003e\n\u003ctd\u003e83 mm × 11.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCountry of Origin\u003c\/th\u003e\n\u003ctd\u003eVietnam\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 × Fretz B-5 Rolled Edge Flat Stake\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fretz","offers":[{"title":"Default Title","offer_id":43580975743190,"sku":"112.615","price":61.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/fretz-b-5-rolled-edge-flat-stake-otto-frei.jpg?v=1719957858"},{"product_id":"fretz-b6-rolled-edge-dome-stake","title":"Fretz B-6 Rolled Edge Dome Stake","description":"\u003cp\u003eThe Fretz B-6 Rolled Edge Dome Stake is a precision miniature forming stake crafted from hardened stainless steel with highly polished surfaces. Designed for professional jewelers and metalsmiths, this stake is ideal for forming bezels, creating hollow rings, and performing fine metalsmithing work that mirrors the techniques used with full-size stakes—executed at a smaller, more controlled scale. As with any quality bench tool, the B-6 can be modified to suit custom applications and specialized workflows.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHardened stainless steel construction for durability and long-term bench use\u003c\/li\u003e\n\u003cli\u003eHighly polished working surfaces help produce smooth, finished results\u003c\/li\u003e\n\u003cli\u003eRolled edge dome profile supports bezel forming and hollow ring construction\u003c\/li\u003e\n\u003cli\u003eMiniature scale allows precise work on small components not suited to larger stakes\u003c\/li\u003e\n\u003cli\u003eAdaptable for custom metalsmithing applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eB-6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eRolled Edge Dome Stake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSurface Dimensions\u003c\/th\u003e\n\u003ctd\u003e83mm – 11.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eHardened stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSurface Finish\u003c\/th\u003e\n\u003ctd\u003eHighly polished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCountry of Origin\u003c\/th\u003e\n\u003ctd\u003eVietnam\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Fretz","offers":[{"title":"Default Title","offer_id":43580976169174,"sku":"112.616","price":61.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/fretz-b-6-rolled-edge-dome-stake-otto-frei.jpg?v=1719957858"},{"product_id":"fretz-r1-standard-raising-stake","title":"Fretz R-1 Standard Raising Stake","description":"\u003cp\u003eThe Fretz R-1 Standard Raising Stake is a precision-crafted miniature forming stake designed for professional jewelers and metalsmiths. Made from hardened stainless steel and fully polished to a smooth, consistent surface, this stake delivers reliable performance for raising and shaping metal with control and accuracy. Its compact dimensions make it well-suited for detailed forming work on small-scale pieces.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMiniature forming stake ideal for raising and shaping metal\u003c\/li\u003e\n\u003cli\u003eHardened stainless steel construction for durability and long-term performance\u003c\/li\u003e\n\u003cli\u003eFully polished surface minimizes surface marks during forming\u003c\/li\u003e\n\u003cli\u003eCompact size supports precise control on detailed work\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eR-1 Standard Raising Stake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eHardened stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSurface Finish\u003c\/th\u003e\n\u003ctd\u003eFully polished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSurface Dimensions\u003c\/th\u003e\n\u003ctd\u003e83mm × 11.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eVietnam\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Fretz","offers":[{"title":"Default Title","offer_id":43580976529622,"sku":"112.620","price":61.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/fretz-r-1-standard-raising-stake-otto-frei.jpg?v=1719957858"},{"product_id":"fretz-r2-rounded-tapered-raising-stake","title":"Fretz R-2 Rounded Tapered Raising Stake","description":"\u003cp\u003eThe Fretz R-2 Rounded Tapered Raising Stake is a precision miniature forming stake crafted from hardened stainless steel with a fully polished surface. Designed for detailed raising and forming work, this stake's rounded, tapered profile gives metalsmiths and jewelers the control needed for shaping small-scale hollow forms, curved surfaces, and dimensional metalwork. The fully polished finish helps prevent surface marring during use.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMiniature forming stake ideal for detailed raising and shaping work\u003c\/li\u003e\n\u003cli\u003eRounded, tapered profile supports precise hollow and curved form development\u003c\/li\u003e\n\u003cli\u003eHardened stainless steel construction for durability and long-term performance\u003c\/li\u003e\n\u003cli\u003eFully polished surface helps protect workpiece finish during forming\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eR-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eRounded Tapered Raising Stake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSurface Dimensions\u003c\/th\u003e\n\u003ctd\u003e83 mm × 11.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eHardened stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eFully polished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eVietnam\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Fretz","offers":[{"title":"Default Title","offer_id":43580976660694,"sku":"112.622","price":61.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/fretz-r-2-rounded-tapered-raising-stake-otto-frei.jpg?v=1719957858"},{"product_id":"fretz-r3-rounded-raising-stake","title":"Fretz R-3 Rounded Raising Stake","description":"\u003cp\u003eThe Fretz R-3 Rounded Raising Stake is a precision miniature forming stake crafted from hardened stainless steel with a fully polished surface. Designed for detailed raising and forming work, this stake features a rounded tapered profile that gives metalsmiths and jewelers control when shaping metal into curved and dimensional forms. Its compact size makes it well suited for small-scale work where larger stakes would be impractical.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRounded tapered raising stake profile for precise metal forming\u003c\/li\u003e\n\u003cli\u003eMiniature size ideal for detailed and small-scale work\u003c\/li\u003e\n\u003cli\u003eHardened stainless steel construction for durability and long-term use\u003c\/li\u003e\n\u003cli\u003eFully polished surface to minimize surface marks on workpieces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eR-3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eHardened stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSurface Finish\u003c\/th\u003e\n\u003ctd\u003eFully polished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSurface Dimensions\u003c\/th\u003e\n\u003ctd\u003e83 mm x 11.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCountry of Origin\u003c\/th\u003e\n\u003ctd\u003eVietnam\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Fretz","offers":[{"title":"Default Title","offer_id":43580976791766,"sku":"112.624","price":61.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/fretz-r-3-rounded-raising-stake-otto-frei.jpg?v=1719957858"},{"product_id":"fretz-f-2a-lining-convex-fluting-stake","title":"Fretz Progressive Stake F-2A Lining Convex Fluting Stake","description":"\u003cp\u003eThe Fretz F-2A Lining Convex Fluting Stake is the first step in the Progressive Stake sequence, used after initial forming on the \u003cem\u003eF-2 Doming Stake\u003c\/em\u003e. Designed to begin the process of creating concave flutes, the F-2A establishes gentle, flowing concave curves without bringing the flutes to a sharp edge. This controlled, gradual approach protects the metal and allows the metalsmith to refine form incrementally.\u003c\/p\u003e\u003cp\u003eThe full progression continues with the \u003cem\u003eF-2B Sharp Convex Fluting Stake\u003c\/em\u003e and the \u003cem\u003eF-2C\u003c\/em\u003e, which successively bring the high points into sharper, more defined relief. The F-2A is the essential starting point in this series, laying the groundwork for precise, repeatable fluted forms.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFirst stake in the Progressive Stake fluting sequence\u003c\/li\u003e\n\u003cli\u003eEstablishes concave curves without creating sharp flutes\u003c\/li\u003e\n\u003cli\u003eUsed following initial forming with the Fretz F-2 Doming Stake\u003c\/li\u003e\n\u003cli\u003eDesigned for incremental, controlled metalforming progressions\u003c\/li\u003e\n\u003cli\u003ePart of a coordinated staking system for fluted jewelry and metalwork\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e75 mm x 14.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eFretz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCategory\u003c\/th\u003e\n\u003ctd\u003eForming Stakes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Fretz","offers":[{"title":"Default Title","offer_id":43580976922838,"sku":"112.626A","price":71.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/fretz-progressive-stake-f-2a-lining-convex-fluting-stake-otto-frei.jpg?v=1719957855"},{"product_id":"fretz-f-2b-sharp-convex-fluting-stake","title":"Fretz Progressive Stake F-2B Sharp Convex Fluting Stake","description":"\u003cp\u003eThe Fretz Progressive Stake F-2B is the second stake in a three-step progression used to develop sharp, defined convex fluting in formed metalwork. Designed to follow the \u003cem\u003eF-2A Lining Convex Fluting Stake\u003c\/em\u003e, the F-2B advances the forming process by bringing the high points of convex flutes into sharper, more pronounced relief. The full progression begins with the F-2 Doming Stake to establish the initial form, continues with the F-2A to introduce convex curves without sharpness, and then moves to the F-2B — and finally the F-2C — to refine and crisp the flute definition with each successive step.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSecond stake in the Fretz Progressive Fluting sequence (F-2A → F-2B → F-2C)\u003c\/li\u003e\n\u003cli\u003eSharpens and deepens convex flute high points established by the F-2A\u003c\/li\u003e\n\u003cli\u003eUsed in conjunction with the F-2 Doming Stake as the foundation form\u003c\/li\u003e\n\u003cli\u003eDesigned for professional metalsmiths and jewelers working with fluted forms\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eFretz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e75 mm × 14.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVariants\u003c\/th\u003e\n\u003ctd\u003eSingle option — no size or style variations\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eThis stake is intended for use as part of the complete Fretz Progressive Fluting series. For best results, work through the progression in order: F-2 Doming Stake, F-2A Lining Convex Fluting Stake, F-2B Sharp Convex Fluting Stake, and F-2C. Using the stakes out of sequence may not produce the intended flute definition.\u003c\/p\u003e","brand":"Fretz","offers":[{"title":"Default Title","offer_id":43580977021142,"sku":"112.626B","price":71.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/fretz-progressive-stake-f-2b-sharp-convex-fluting-stake-otto-frei.jpg?v=1719957855"},{"product_id":"fretz-f-2c-extra-sharp-convex-fluting-stake","title":"Fretz Progressive Stake F-2C Extra Sharp Convex Fluting Stak","description":"\u003cp\u003eThe Fretz F-2C Extra Sharp Convex Fluting Stake is the final step in the Progressive Stake sequence, designed to bring fluted metalwork to its sharpest, most refined definition. Used after a piece has been initially formed on the \u003cem\u003eF-2 Doming Stake\u003c\/em\u003e, the progressive series systematically deepens and sharpens concave flutes through a controlled three-stake workflow.\u003c\/p\u003e\u003cp\u003eThe sequence begins with the \u003cem\u003eF-2A Lining Convex Fluting Stake\u003c\/em\u003e, which establishes concave curves without sharp definition. The \u003cem\u003eF-2B Sharp Convex Fluting Stake\u003c\/em\u003e then advances the form, bringing the high points into greater relief. The F-2C completes the progression, delivering the extra-sharp flute definition required for crisp, high-contrast surface work in fine metalsmithing and jewelry fabrication.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFinal stake in the Fretz F-2 Progressive Stake series\u003c\/li\u003e\n\u003cli\u003eProduces extra-sharp, high-contrast convex fluting profiles\u003c\/li\u003e\n\u003cli\u003eDesigned for use after the F-2A and F-2B stakes in sequence\u003c\/li\u003e\n\u003cli\u003eIdeal for refining concave flutes to precise, sharp-edged definition\u003c\/li\u003e\n\u003cli\u003ePart of a systematic forming workflow starting with the F-2 Doming Stake\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e75 mm × 14.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStake Type\u003c\/th\u003e\n\u003ctd\u003eProgressive Convex Fluting Stake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eFretz F-2 Progressive Stake Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVariants\u003c\/th\u003e\n\u003ctd\u003eSingle variant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eNotes\u003c\/h3\u003e\u003cp\u003eFor best results, use this stake as the final step in the F-2 progression: begin forming on the F-2 Doming Stake, establish initial concave curves with the F-2A, advance definition with the F-2B, then finish with the F-2C for extra-sharp flute relief.\u003c\/p\u003e","brand":"Fretz","offers":[{"title":"Default Title","offer_id":43580977086678,"sku":"112.626C","price":71.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/fretz-progressive-stake-f-2c-extra-sharp-convex-fluting-stak-otto-frei.jpg?v=1719957855"},{"product_id":"fretz-micro-mandrel-set-4-at1-at2-at3-at4","title":"Fretz Micro Mandrel Set Of 4","description":"\u003cp\u003eThe Fretz Micro Mandrel Set of 4 gives metalsmiths and jewelers a complete assortment of precision-formed mandrels for shaping small-scale work with accuracy and control. Each mandrel in the set is machined from highly polished hardened stainless steel, providing a smooth, durable working surface that supports clean, consistent forming on delicate pieces.\u003c\/p\u003e\n\n\u003cp\u003eThe set includes four distinct micro mandrels — two tapered and two straight — covering a range of small diameters ideal for rings, bezels, tubes, and other miniature metalwork. At 3-1\/4\" long, each mandrel is sized for comfortable hand use and precise control.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSet of 4 micro mandrels covering tapered and straight profiles\u003c\/li\u003e\n\u003cli\u003eMachined from highly polished hardened stainless steel\u003c\/li\u003e\n\u003cli\u003eEach mandrel is 3-1\/4\" long\u003c\/li\u003e\n\u003cli\u003eTwo tapered mandrels provide graduated diameter ranges for forming and sizing\u003c\/li\u003e\n\u003cli\u003eTwo straight mandrels offer consistent fixed-diameter working surfaces\u003c\/li\u003e\n\u003cli\u003eCompact size suited for small-scale jewelry and metalsmithing work\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eHighly polished hardened stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength (each)\u003c\/th\u003e\n\u003ctd\u003e3-1\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQuantity\u003c\/th\u003e\n\u003ctd\u003eSet of 4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAT-1\u003c\/strong\u003e – Tapered Micro Mandrel, 3-1\/4\" long; one end 2mm–4mm, other end 3mm–5mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAT-2\u003c\/strong\u003e – Gradually Tapered Micro Mandrel, 3-1\/4\" long; one end 3mm–4mm, other end 4mm–5mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAT-3\u003c\/strong\u003e – Straight Micro Mandrel, 3-1\/4\" long; one end 5mm, other end 4mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAT-4\u003c\/strong\u003e – Straight Micro Mandrel, 3-1\/4\" long; 5mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fretz","offers":[{"title":"Default Title","offer_id":43580977119446,"sku":"112.635B","price":89.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/fretz-micro-mandrel-set-of-4-otto-frei.jpg?v=1719957855"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/collections\/fretz-otto-frei.png?v=1726692596","url":"https:\/\/www.ottofrei.com\/collections\/fretz-hammers-stakes-forming-tools.oembed?page=7","provider":"Otto Frei","version":"1.0","type":"link"}