This is the complete set of all Glardon-Vallorbe Swiss Joint Round Edge Files, LP-1170-4-2. This set contains one each of all the different thicknesses made listed below,
*Factory Gauge number given is closest British Wire Gauge/Stubs Wire Gauge (BWG/SWG) and not the American Standard B&S Gauge. Metric size given is accurate.
LP1170/1171-4-2-0.3 131.169.5 0.30mm
LP1170/1171-4-2-0.4 131.169 0.40mm 27 Gauge*
LP1170/1171-4-2-0.5 131.168 0.50mm 25 Gauge*
LP1170/1171-4-2-0.6 131.167 0.60mm 23 Gauge*
LP1170/1171-4-2-0.7 131.166 0.70mm 22 Gauge*
LP1170/1171-4-2-0.8 131.165 0.80mm 21 Gauge*
LP1170/1171-4-2-0.9 131.164 0.90mm 20 Gauge*
LP1170/1171-4-2-1.0 131.163 1.00mm 19 Gauge*
LP1170/1171-4-2-1.1 131.162.5 1.1mm
LP1170/1171-4-2-1.2 131.162 1.20mm 18 Gauge*
LP1170/1171-4-2-1.5 131.161 1.5mm 17 Gauge*
LP1170/1171-4-2-2.0 131.160 2.00mm 14 Gauge*
Joint Round Edge files are parallel in width and thickness, with rounded edges. These files are cut on the edges only. They are used for getting into thin narrow spaces where they will file depth wise but not any wider than you want. Jewelers need them for fabricating joints, hinges and tubing. Also used in guitar repair and servicing as bridge & nut slotting files. Joint Round Edge files from
Glardon-Vallorbe Swiss are only available in cut 2 medium in the 100mm (4") cut length by 10mm (0.39") width, but are available in a variety of thicknesses, from 0.4mm (1/64" or 0.016") to 2.0mm (5/64" or 0.079") thick. Overall length including tang is 5-5/8"
Glardon-Vallorbe Swiss Made Precision Files-The world's standard for quality and performance!
Glardon-Vallorbe Swiss Made Precision Files are manufactured to precise production standards, using a combination of machine cutting and hand craftsmanship to produce the most accurate, best cutting, and longest-lasting files in the world. They are made of the finest heat-tempered, chrome alloy steel and have the "right" feel, action and balanced desired by all true craftsmen. Glardon-Vallorbe Swiss Made Precision Files deliver superior performance on all metals. Simply the best you can buy! Formerly distributed by Grobet USA under the brand name Grobet Swiss.
Things you should know about ordering hand files:
-
Glardon-Vallorbe Swiss Made Precision Files are measured from the point where the teeth begin to the end of the file. A 6" half-round ring file will measure 8 1/2" long from tip to end of tang, but it is called a 6" file.
-
Glardon-Vallorbe Swiss Made Precision Files are graded with a number from 00 for coarsest to 6 for finest. Remember, the higher the number the finer the cut.
*Factory Gauge number given is closest British Wire Gauge/Stubs Wire Gauge (BWG/SWG) and not the American Standard B&S Gauge. Metric size given is accurate.
