{"title":"Shears","description":"","products":[{"product_id":"profiform-round-hole-punches-3-10mm","title":"Profiform Round Hole Punches","description":"\u003cp\u003eProfiform Round Hole Punches deliver high-precision hole punching in a range of round sizes for use with the Profiform 200 or 320 systems. Each punch is sold individually and includes everything needed for a complete punching operation — a hardened and ground punch, a hardened and ground die, and a stripper pad matched to the shape of the punch. Punches may be purchased separately or as part of a complete set with either the Profiform 200 or 320. When purchasing separately, the punch holder (Part No. 153.430) is required.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-precision hardened and ground punch for clean, accurate holes\u003c\/li\u003e\n\u003cli\u003eIncludes matching hardened and ground die\u003c\/li\u003e\n\u003cli\u003eIncludes stripper pad matched to the punch shape\u003c\/li\u003e\n\u003cli\u003eCompatible with the Profiform 200 and Profiform 320 systems\u003c\/li\u003e\n\u003cli\u003eAvailable in six round sizes: 3.0mm – 10.0mm\u003c\/li\u003e\n\u003cli\u003eCan be purchased individually or as part of a complete set\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eShape\u003c\/th\u003e\n\u003ctd\u003eRound\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePunch Construction\u003c\/th\u003e\n\u003ctd\u003eHardened and ground\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDie Construction\u003c\/th\u003e\n\u003ctd\u003eHardened and ground\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncludes\u003c\/th\u003e\n\u003ctd\u003ePunch, die, and stripper pad\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Systems\u003c\/th\u003e\n\u003ctd\u003eProfiform 200, Profiform 320\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePunch Holder Required (sold separately)\u003c\/th\u003e\n\u003ctd\u003ePart No. 153.430\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eAvailable Options\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.403\u003c\/td\u003e\n\u003ctd\u003e3.0mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.404\u003c\/td\u003e\n\u003ctd\u003e4.0mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.405\u003c\/td\u003e\n\u003ctd\u003e5.0mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.406\u003c\/td\u003e\n\u003ctd\u003e6.0mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.408\u003c\/td\u003e\n\u003ctd\u003e8.0mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.410\u003c\/td\u003e\n\u003ctd\u003e10.0mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOne hardened and ground punch (selected size)\u003c\/li\u003e\n\u003cli\u003eOne hardened and ground die\u003c\/li\u003e\n\u003cli\u003eOne stripper pad matched to punch shape\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eThe punch holder (Part No. 153.430) is \u003cstrong\u003enot included\u003c\/strong\u003e and must be purchased separately when buying punches individually. These punches are designed for use with the Profiform 200 and Profiform 320 systems only.\u003c\/p\u003e","brand":"Profiform","offers":[{"title":"3.0mm","offer_id":47551710232790,"sku":"153.403","price":139.0,"currency_code":"USD","in_stock":true},{"title":"4.0mm","offer_id":47551710265558,"sku":"153.404","price":139.0,"currency_code":"USD","in_stock":true},{"title":"5.0mm","offer_id":47551710298326,"sku":"153.405","price":139.0,"currency_code":"USD","in_stock":true},{"title":"6.0mm","offer_id":47551710331094,"sku":"153.406","price":139.0,"currency_code":"USD","in_stock":true},{"title":"8.0mm","offer_id":47551710363862,"sku":"153.408","price":139.0,"currency_code":"USD","in_stock":true},{"title":"10.0mm","offer_id":47551710396630,"sku":"153.410","price":139.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/profiform-round-hole-punches-otto-frei.jpg?v=1719958691"},{"product_id":"profiform-square-rectangle-hole-punches-4mm-12mm","title":"Profiform Square \u0026 Rectangle Hole Punches","description":"\u003cp\u003eProfiform Square \u0026amp; Rectangle Hole Punches deliver high-precision punching performance for jewelers and metalsmiths working with the Profiform 200 or 320 systems. Available in five square sizes and one rectangular size, these punches are engineered to produce clean, accurate openings in sheet metal with consistent results across every use.\u003c\/p\u003e\u003cp\u003eEach punch set includes a hardened and ground punch, a hardened and ground die, and a stripper pad matched to the shape of the punch — everything needed for precise, repeatable hole punching. Punches may be used as part of a complete Profiform system or purchased separately. \u003cstrong\u003eNote:\u003c\/strong\u003e When purchasing separately, punch holder Part No. 153.430 must also be acquired.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHigh-precision hardened and ground punch for accurate, clean results\u003c\/li\u003e\n\u003cli\u003eMatching hardened and ground die included with each set\u003c\/li\u003e\n\u003cli\u003eStripper pad matched to punch shape included\u003c\/li\u003e\n\u003cli\u003eAvailable in five square sizes and one rectangular size\u003c\/li\u003e\n\u003cli\u003eCompatible with the Profiform 200 and Profiform 320 systems\u003c\/li\u003e\n\u003cli\u003eCan be purchased individually or as part of a complete Profiform set\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePunch Construction\u003c\/th\u003e\n\u003ctd\u003eHardened and ground punch and die\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncluded Components\u003c\/th\u003e\n\u003ctd\u003ePunch, die, and matched stripper pad\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Systems\u003c\/th\u003e\n\u003ctd\u003eProfiform 200, Profiform 320\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeparate Purchase Required\u003c\/th\u003e\n\u003ctd\u003ePunch holder Part No. 153.430 (when buying separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eAvailable Options\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eShape\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.414\u003c\/td\u003e\n\u003ctd\u003e4 mm x 4 mm\u003c\/td\u003e\n\u003ctd\u003eSquare\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.416\u003c\/td\u003e\n\u003ctd\u003e6 mm x 6 mm\u003c\/td\u003e\n\u003ctd\u003eSquare\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.418\u003c\/td\u003e\n\u003ctd\u003e8 mm x 8 mm\u003c\/td\u003e\n\u003ctd\u003eSquare\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.420\u003c\/td\u003e\n\u003ctd\u003e10 mm x 10 mm\u003c\/td\u003e\n\u003ctd\u003eSquare\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.422\u003c\/td\u003e\n\u003ctd\u003e12 mm x 12 mm\u003c\/td\u003e\n\u003ctd\u003eSquare\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.424\u003c\/td\u003e\n\u003ctd\u003e4 mm x 20 mm\u003c\/td\u003e\n\u003ctd\u003eRectangle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHardened and ground punch\u003c\/li\u003e\n\u003cli\u003eHardened and ground die\u003c\/li\u003e\n\u003cli\u003eStripper pad matched to punch shape\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eNotes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePunch holder Part No. 153.430 must be purchased separately if not using a complete Profiform system.\u003c\/li\u003e\n\u003cli\u003eThese punches are also available as part of a complete set with the Profiform 200 or Profiform 320.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Profiform","offers":[{"title":"4mm x 4mm","offer_id":47551710560470,"sku":"153.414","price":169.0,"currency_code":"USD","in_stock":true},{"title":"6mm x 6mm","offer_id":47551710593238,"sku":"153.416","price":169.0,"currency_code":"USD","in_stock":true},{"title":"8mm x 8mm","offer_id":47551710626006,"sku":"153.418","price":169.0,"currency_code":"USD","in_stock":false},{"title":"10mm x 10mm","offer_id":47551710658774,"sku":"153.420","price":169.0,"currency_code":"USD","in_stock":false},{"title":"12mm x 12mm","offer_id":47551710691542,"sku":"153.422","price":169.0,"currency_code":"USD","in_stock":true},{"title":"4mm x 20mm","offer_id":47551710724310,"sku":"153.424","price":169.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/profiform-square-and-rectangle-hole-punches-otto-frei.jpg?v=1719958690"},{"product_id":"profiform-shear-stops-200-320","title":"Profiform Shear Stops","description":"\u003cp\u003eShear stops for the Profiform 200 and 320 provide precise depth control during shearing operations. Choose from a Basic stop that mounts on one side of either machine or Double Sided stops that span the full length of the Profiform 200 or 320 for more advanced cutting applications.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eBasic stop\u003c\/strong\u003e mounts on one side of either the Profiform 200 or 320 and serves as a depth stop while shearing. The \u003cstrong\u003eDouble Sided stops\u003c\/strong\u003e mount on both sides of the machine and cover its full length, enabling you to cut parallel parts as well as tapered parts between 0 and 15 degrees.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBasic model compatible with both Profiform 200 and 320\u003c\/li\u003e\n\u003cli\u003eDouble Sided models available separately for Profiform 200 and Profiform 320\u003c\/li\u003e\n\u003cli\u003eBasic stop mounts on one side for use as a depth stop during shearing\u003c\/li\u003e\n\u003cli\u003eDouble Sided stops mount on both sides and cover the full length of the machine\u003c\/li\u003e\n\u003cli\u003eDouble Sided stops support cutting of parallel parts and tapered parts up to 15 degrees\u003c\/li\u003e\n\u003cli\u003eAll models adjustable from 0–95 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAdjustment Range\u003c\/th\u003e\n\u003ctd\u003e0–95 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Machines\u003c\/th\u003e\n\u003ctd\u003eProfiform 200, Profiform 320\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eAvailable Options\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003cth\u003eCompatible Machine(s)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.425\u003c\/td\u003e\n\u003ctd\u003eBasic\u003c\/td\u003e\n\u003ctd\u003eProfiform 200 or 320\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.444\u003c\/td\u003e\n\u003ctd\u003eDouble Sided\u003c\/td\u003e\n\u003ctd\u003eProfiform 200\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.445\u003c\/td\u003e\n\u003ctd\u003eDouble Sided\u003c\/td\u003e\n\u003ctd\u003eProfiform 320\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Profiform","offers":[{"title":"Basic (for 200 or 300)","offer_id":43579147976918,"sku":"153.425","price":68.0,"currency_code":"USD","in_stock":false},{"title":"Double Sided (for 200)","offer_id":43579148009686,"sku":"153.444","price":160.0,"currency_code":"USD","in_stock":false},{"title":"Double Sided (for 300)","offer_id":43579148042454,"sku":"153.445","price":165.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/profiform-shear-stops-otto-frei.jpg?v=1719958691"},{"product_id":"profiform-louver-rib-forming-tools-200-320","title":"Profiform Louvers \u0026 Rib Forming Tools","description":"\u003cp\u003eExpand the capabilities of your Profiform 200 or Profiform 320 sheet metal forming machine with these specialized louver and rib forming tools. Designed for precision fabrication, these tools allow metalsmiths and metalworkers to create clean, consistent louvers and reinforcement ribs directly in sheet metal. The \u003cstrong\u003eHolder for Forming Tool (153.432)\u003c\/strong\u003e is required to use any of the louver or groove forming tools listed below, and it also accepts custom \"do-it-yourself\" tools for use on compatible Profiform machines.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSpecialized forming tools engineered for use with Profiform 200 and Profiform 320 machines\u003c\/li\u003e\n\u003cli\u003eProduces precise louvers and reinforcement ribs in sheet metal\u003c\/li\u003e\n\u003cli\u003eTool holder (153.432) required for all louver and rib forming tools\u003c\/li\u003e\n\u003cli\u003eTool holder also accommodates custom DIY forming tools on compatible Profiform machines\u003c\/li\u003e\n\u003cli\u003eAvailable in multiple louver widths and rib configurations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Machines\u003c\/th\u003e\n\u003ctd\u003eProfiform 200, Profiform 320\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRequired Accessory\u003c\/th\u003e\n\u003ctd\u003eHolder for Forming Tool, Part # 153.432\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLouver Length\u003c\/th\u003e\n\u003ctd\u003e35mm (all louver tools)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eAvailable Options\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.432\u003c\/td\u003e\n\u003ctd\u003eHolder for Forming Tool\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.433\u003c\/td\u003e\n\u003ctd\u003eForming Tool for Louvers\u003c\/td\u003e\n\u003ctd\u003e1.5mm × 35mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.434\u003c\/td\u003e\n\u003ctd\u003eForming Tool for Louvers\u003c\/td\u003e\n\u003ctd\u003e2.5mm × 35mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.435\u003c\/td\u003e\n\u003ctd\u003eForming Tool for Reinforcement Ribs\u003c\/td\u003e\n\u003ctd\u003e1mm × 35mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eThe Holder for Forming Tool (153.432) must be purchased separately and is required to use any of the louver or rib forming tools.\u003c\/strong\u003e These tools are designed exclusively for compatible Profiform machines and are not intended for use with other equipment.\u003c\/p\u003e","brand":"Profiform","offers":[{"title":"Holder for Forming Tool","offer_id":43579148402902,"sku":"153.432","price":146.0,"currency_code":"USD","in_stock":false},{"title":"Forming Tool 1.5x35mm Louvers","offer_id":43579148435670,"sku":"153.433","price":98.0,"currency_code":"USD","in_stock":false},{"title":"Forming Tool 2.5x35mm Louvers","offer_id":43579148468438,"sku":"153.434","price":98.0,"currency_code":"USD","in_stock":false},{"title":"Forming Tool 1x35mm Ribs","offer_id":43579148501206,"sku":"153.435","price":98.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/profiform-louvers-and-rib-forming-tools-otto-frei-2.jpg?v=1724351113"},{"product_id":"profiform-boxing-tool-sets-200-320","title":"Profiform Boxing Tool Sets","description":"\u003cp\u003eProfiform Boxing Tool Sets are designed to completely fold sheet metal 180° in two precise operations. In the first operation, the sheet metal is bent to approximately 120°; in the second operation, it is folded to a full 180°. Boxed constructions are ideal for thin sheet metal applications where reinforcement is needed or wherever a sharp edge must be avoided. Each set consists of three tools and is available in two versions to match either the Profiform 200 or Profiform 320 press brake.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFolds sheet metal to a full 180° in two sequential operations\u003c\/li\u003e\n\u003cli\u003eFirst operation bends sheet metal to approximately 120°\u003c\/li\u003e\n\u003cli\u003eSecond operation completes the fold to 180°\u003c\/li\u003e\n\u003cli\u003eIdeal for thin sheet metal reinforcement and eliminating sharp edges\u003c\/li\u003e\n\u003cli\u003eEach set includes three tools\u003c\/li\u003e\n\u003cli\u003eAvailable in versions sized for the Profiform 200 and Profiform 320\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eTools per Set\u003c\/th\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Equipment\u003c\/th\u003e\n\u003ctd\u003eProfiform 200 or Profiform 320 (sold separately, by version)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eAvailable Options\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eVersion\u003c\/th\u003e\n\u003cth\u003eFunctional Length\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.436\u003c\/td\u003e\n\u003ctd\u003eBoxing Tool Set for Profiform 200\u003c\/td\u003e\n\u003ctd\u003e200 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.437\u003c\/td\u003e\n\u003ctd\u003eBoxing Tool Set for Profiform 320\u003c\/td\u003e\n\u003ctd\u003e320 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Profiform","offers":[{"title":"Boxing Tool Set for Profiform 200","offer_id":43579148533974,"sku":"153.436","price":292.0,"currency_code":"USD","in_stock":false},{"title":"Boxing Tool Set for Profiform 320","offer_id":43579148566742,"sku":"153.437","price":330.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/profiform-boxing-tool-sets-otto-frei-1.jpg?v=1719958688"},{"product_id":"profiform-200-bench-shear-bending-brake-200mm-18ga","title":"Profiform 200 Basic Unit-7-3\/4\" Bench Shear \u0026 Bending Brake","description":"\u003cp\u003e\u003cstrong\u003eProfiform 200\u003c\/strong\u003e is the original Swiss-made, hand-operated sheet-metal machine for clean shearing and precise bending at the bench. It cuts gold, silver, copper, and brass sheet up to \u003cstrong\u003e200 mm (7-3\/4\") wide\u003c\/strong\u003e and \u003cstrong\u003e18 gauge (≈1.0 mm)\u003c\/strong\u003e thick, with ground, hardened reversible \u003cstrong\u003ehigh-speed steel cutters\u003c\/strong\u003e that offer \u003cstrong\u003efour cutting edges\u003c\/strong\u003e for long service life. V-blocks and bending punches are made of high-grade profiled steel for crisp, repeatable bends. It also works well on plastics, paper, PCB, veneer, and other thin materials.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShear \u0026amp; bend in one tool:\u003c\/strong\u003e Clean shearing plus brake for accurate bends.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReversible HSS cutters:\u003c\/strong\u003e Precision-ground, hardened, four-edge blades extend usable life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwiss made:\u003c\/strong\u003e Original, high-precision build for prototypes, models, jewelry, and small parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile materials:\u003c\/strong\u003e Metals, plastics, paper, cardboard, PCB, veneer, and more.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eMax Cut Width\u003c\/th\u003e\n\u003ctd\u003e7-3\/4\" (200 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax Thickness – Non-ferrous (Au\/Ag\/Cu\/Br)\u003c\/th\u003e\n\u003ctd\u003e18 ga ≈ 1.0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax Thickness – Aluminum \/ Plastics\u003c\/th\u003e\n\u003ctd\u003e≈ 1.5 mm (0.059\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCutters\u003c\/th\u003e\n\u003ctd\u003ePrecision-ground, hardened, reversible HSS (4 cutting edges)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBending Tools\u003c\/th\u003e\n\u003ctd\u003eV-blocks \u0026amp; punches in high-grade profiled steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOperations\u003c\/th\u003e\n\u003ctd\u003eShearing, bending; punching with optional accessories\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCountry of Origin\u003c\/th\u003e\n\u003ctd\u003eSwitzerland\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eProfiform 200 basic machine (shear \u0026amp; brake)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eNotes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThis listing is for the \u003cstrong\u003ebasic Profiform 200\u003c\/strong\u003e (shearing \u0026amp; bending). Punching requires optional accessories sold separately.\u003c\/li\u003e\n\u003cli\u003eFor best results, use within the stated width and thickness capacities and keep blades properly indexed to a fresh cutting edge.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Profiform","offers":[{"title":"Default Title","offer_id":43579765031126,"sku":"153.400","price":1515.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/profiform-200-basic-unit-7-34-bench-shear-and-bending-brake-otto-frei.jpg?v=1719958465"},{"product_id":"german-scissor-handle-solder-snips-straight-blades","title":"German Scissor Handle Solder Snips-Straight Blades","description":"\u003cp\u003eThese lightweight German-made solder snips are designed for precision cutting of solder and medium hard metals up to 20 gauge. Featuring a comfortable scissor-style handle and straight blades, these snips offer reliable control for jewelers and metalsmiths working with sheet metal, solder strips, and similar materials. At 7\" overall length with 1-1\/2\" blades, they strike a practical balance between maneuverability and cutting capacity.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eScissor-style handle for comfortable, controlled cutting\u003c\/li\u003e\n\u003cli\u003eStraight blades suited for clean, direct cuts\u003c\/li\u003e\n\u003cli\u003eDesigned for cutting solder and medium hard metals\u003c\/li\u003e\n\u003cli\u003eLightweight construction reduces hand fatigue during extended use\u003c\/li\u003e\n\u003cli\u003eGerman made for quality and durability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall Length\u003c\/th\u003e\n\u003ctd\u003e7\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlade Length\u003c\/th\u003e\n\u003ctd\u003e1-1\/2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlade Type\u003c\/th\u003e\n\u003ctd\u003eStraight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Cutting Capacity\u003c\/th\u003e\n\u003ctd\u003e20 gauge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eGermany\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Otto Frei","offers":[{"title":"Default Title","offer_id":43580911681750,"sku":"153.800","price":24.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/german-scissor-handle-solder-snips-straight-blades-otto-frei.jpg?v=1719957918"},{"product_id":"german-red-handle-solder-snips-straight-long-blades-8in","title":"German Red Handle Solder Snips Straight Long Blades","description":"\u003cp\u003eThese German-made lightweight snips are designed for cutting solder and medium-hard metals up to 20 gauge. Built for precision work at the bench, they feature \u003cstrong\u003estraight long blades\u003c\/strong\u003e and are ideal for jewelers and metalsmiths who require clean, controlled cuts on thin sheet and solder stock. At 8\" overall length with 2-1\/2\" blades, these snips offer comfortable reach and leverage for detailed cutting tasks.\u003c\/p\u003e\u003cp\u003eNote that this is the \u003cstrong\u003estraight long blade version with no spring\u003c\/strong\u003e. A straight short blade version is also available, identifiable by its chrome-colored blades.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDesigned for cutting solder and medium-hard metals up to 20 gauge\u003c\/li\u003e\n\u003cli\u003eStraight long blade configuration — no spring mechanism\u003c\/li\u003e\n\u003cli\u003eLightweight construction for reduced hand fatigue during extended use\u003c\/li\u003e\n\u003cli\u003eRed handle for easy bench identification\u003c\/li\u003e\n\u003cli\u003eMade in Germany\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall Length\u003c\/th\u003e\n\u003ctd\u003e8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlade Length\u003c\/th\u003e\n\u003ctd\u003e2-1\/2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlade Style\u003c\/th\u003e\n\u003ctd\u003eStraight long\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpring\u003c\/th\u003e\n\u003ctd\u003eNo spring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Cutting Capacity\u003c\/th\u003e\n\u003ctd\u003e20 gauge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCountry of Origin\u003c\/th\u003e\n\u003ctd\u003eGermany\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Otto Frei","offers":[{"title":"Default Title","offer_id":43580929573078,"sku":"153.799","price":22.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/german-red-handle-solder-snips-straight-long-blades-otto-frei.jpg?v=1719957880"},{"product_id":"german-red-handle-solder-snips-straight-short-blades","title":"German Red Handle Solder Snips-Straight Short Blades","description":"\u003cp\u003eThese German-made lightweight snips are designed for cutting solder and medium-hard metals up to 20 gauge. Built for precision work at the bench, they offer clean, controlled cuts in a compact, easy-to-handle form. The straight short blade configuration makes them well-suited for detailed trimming and snipping tasks where a longer blade would be cumbersome.\u003c\/p\u003e\u003cp\u003eThis version features \u003cstrong\u003ered handles\u003c\/strong\u003e and \u003cstrong\u003eshort straight blades\u003c\/strong\u003e, distinguishing them from the companion long-blade version, which is identified by black-colored handles. At 7 inches overall with 1½-inch blades, these snips balance reach and control for everyday soldering and sheet metal work.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLightweight construction for reduced hand fatigue during extended use\u003c\/li\u003e\n\u003cli\u003eStraight short blades for precise, controlled cuts\u003c\/li\u003e\n\u003cli\u003eRed handles for easy identification at the bench\u003c\/li\u003e\n\u003cli\u003eSuitable for cutting solder and medium-hard metals up to 20 gauge\u003c\/li\u003e\n\u003cli\u003eMade in Germany\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall Length\u003c\/th\u003e\n\u003ctd\u003e7 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlade Length\u003c\/th\u003e\n\u003ctd\u003e1½ inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlade Style\u003c\/th\u003e\n\u003ctd\u003eStraight, short\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHandle Color\u003c\/th\u003e\n\u003ctd\u003eRed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Metal Gauge\u003c\/th\u003e\n\u003ctd\u003e20 gauge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eGermany\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Otto Frei","offers":[{"title":"Default Title","offer_id":43580930588886,"sku":"153.801","price":22.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/german-red-handle-solder-snips-straight-short-blades-otto-frei.jpg?v=1719957880"},{"product_id":"german-straight-solder-snips-removable-spring-7in","title":"German Straight Solder Snips With Removable Spring","description":"\u003cp\u003eThese German straight solder snips—also known as hand shears—are designed for cutting solder and medium hard metals up to 20 gauge. Built for precision bench work, these snips feature straight blades and a removable return spring for comfortable, controlled cutting. At 7\" overall length with 1-1\/2\" blades, they offer the reach and bite needed for detail-oriented metalsmithing tasks. The current version also includes a removable rubber closure to keep the blades safely shut when not in use.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStraight blade design suited for cutting solder and medium hard metals\u003c\/li\u003e\n\u003cli\u003eCuts metals up to 20 gauge\u003c\/li\u003e\n\u003cli\u003eRemovable return spring for customizable cutting action\u003c\/li\u003e\n\u003cli\u003eRemovable rubber closure keeps blades closed during storage\u003c\/li\u003e\n\u003cli\u003e7\" overall length with 1-1\/2\" blades\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall Length\u003c\/th\u003e\n\u003ctd\u003e7\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlade Length\u003c\/th\u003e\n\u003ctd\u003e1-1\/2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Cutting Capacity\u003c\/th\u003e\n\u003ctd\u003e20 gauge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlade Type\u003c\/th\u003e\n\u003ctd\u003eStraight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpring\u003c\/th\u003e\n\u003ctd\u003eRemovable return spring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eClosure\u003c\/th\u003e\n\u003ctd\u003eRemovable rubber closure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eGermany\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 pair of straight solder snips\u003c\/li\u003e\n\u003cli\u003eRemovable return spring\u003c\/li\u003e\n\u003cli\u003eRemovable rubber blade closure\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Otto Frei","offers":[{"title":"Default Title","offer_id":43580933767382,"sku":"153.815","price":22.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/solder-snips-with-spring-straight-blades-otto-frei.jpg?v=1719957880"},{"product_id":"french-solder-snips-spring-curved-blades-7in","title":"French Solder Snips With Spring-Curved Blades","description":"\u003cp\u003eThese lightweight French solder snips are precision hand shears designed for cutting solder and medium-hard metals up to 20 gauge. The curved blade design makes it easier to cut intricate designs and shapes in sheet metal, giving jewelers and metalsmiths greater control and maneuverability. A built-in return spring reduces hand fatigue during extended use. At 7\" overall length with 1½\" blades, these snips offer a compact, well-balanced tool suited for bench work.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCurved blades allow easier cutting of designs and shapes in sheet metal\u003c\/li\u003e\n\u003cli\u003eBuilt-in return spring for reduced hand fatigue\u003c\/li\u003e\n\u003cli\u003eLightweight construction for comfortable extended use\u003c\/li\u003e\n\u003cli\u003eSuitable for cutting solder and medium-hard metals up to 20 gauge\u003c\/li\u003e\n\u003cli\u003eCompact 7\" overall length ideal for bench use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall Length\u003c\/th\u003e\n\u003ctd\u003e7\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlade Length\u003c\/th\u003e\n\u003ctd\u003e1½\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlade Style\u003c\/th\u003e\n\u003ctd\u003eCurved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax Metal Gauge\u003c\/th\u003e\n\u003ctd\u003e20 gauge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpring\u003c\/th\u003e\n\u003ctd\u003eReturn spring included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eFrance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Otto Frei","offers":[{"title":"Default Title","offer_id":43580934389974,"sku":"153.816","price":22.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/french-solder-snips-with-spring-curved-blades-otto-frei.jpg?v=1686176482"},{"product_id":"grobet-scissor-shears-straight-7-25in","title":"Grobet Scissor Shears-Straight","description":"\u003cp\u003eThese straight scissor shears from Grobet USA are built for cutting copper sheet up to 20 gauge thick. With a total length of 7-1\/4\" and 1-1\/2\" blades, they deliver controlled, precise cuts for metalsmithing and forming work. The straight blade orientation makes them well-suited for clean, direct cuts on flat sheet stock.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStraight blade design for direct, controlled cutting\u003c\/li\u003e\n\u003cli\u003eCuts copper sheet up to 20 gauge thick\u003c\/li\u003e\n\u003cli\u003e7-1\/4\" overall length for comfortable handling and leverage\u003c\/li\u003e\n\u003cli\u003e1-1\/2\" blade length for focused cuts on sheet material\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall Length\u003c\/th\u003e\n\u003ctd\u003e7-1\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlade Length\u003c\/th\u003e\n\u003ctd\u003e1-1\/2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlade Style\u003c\/th\u003e\n\u003ctd\u003eStraight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Material Capacity\u003c\/th\u003e\n\u003ctd\u003eCopper up to 20 gauge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Grobet USA","offers":[{"title":"Default Title","offer_id":43580945563862,"sku":"153.820","price":31.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/grobet-scissor-shears-straight-otto-frei.jpg?v=1719957875"},{"product_id":"solder-snips-value-line","title":"Solder Snips - Value Line","description":"\u003cp\u003eThese straight solder snips offer reliable cutting performance at an accessible price point. Featuring plain handles and no return spring, they are modeled after traditional German and French solder snip designs. A practical choice for jewelers and metalsmiths who need a dependable cutting tool for everyday bench work without the premium cost.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStraight cutting blade for precise solder snip work\u003c\/li\u003e\n\u003cli\u003ePlain handle design for a secure, comfortable grip\u003c\/li\u003e\n\u003cli\u003eNo return spring — traditional manual operation\u003c\/li\u003e\n\u003cli\u003eModeled after classic German and French solder snip styles\u003c\/li\u003e\n\u003cli\u003eGood quality for the price — ideal for high-volume or budget-conscious bench work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eStyle\u003c\/th\u003e\n\u003ctd\u003eStraight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHandle Type\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpring\u003c\/th\u003e\n\u003ctd\u003eNo return spring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCountry of Origin\u003c\/th\u003e\n\u003ctd\u003ePakistan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eNotes\u003c\/h3\u003e\u003cp\u003eThese snips are a value-line alternative to premium German or French solder snips. They are well-suited for general studio use and situations where multiple pairs are needed across a shared workspace.\u003c\/p\u003e","brand":"Value Line","offers":[{"title":"Default Title","offer_id":43580997894358,"sku":"153.805","price":10.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/solder-snips-value-line-otto-frei.jpg?v=1719957798"},{"product_id":"grobet-compound-action-aviation-shears-18-gauge","title":"Grobet Compound Action Aviation Shears","description":"\u003cp\u003eThese compound action aviation shears from Grobet USA deliver powerful, clean cuts through sheet metal up to 18 gauge thick. Designed for jewelers, metalsmiths, and fabricators who need reliable cutting performance, these shears feature super-strong serrated blades that grip and slice through metal without distortion or ragged edges.\u003c\/p\u003e\n\n\u003cp\u003eAt 10 inches in length with 1‑1\/2 inch blades, these aviation snips provide the leverage and control needed for precise metalworking cuts. The compound action mechanism multiplies cutting force, reducing hand fatigue during extended use.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCompound action mechanism for increased cutting power with less hand effort\u003c\/li\u003e\n\u003cli\u003eSuper-strong serrated blades for clean, secure cuts through sheet metal\u003c\/li\u003e\n\u003cli\u003eCuts metal up to 18 gauge thick\u003c\/li\u003e\n\u003cli\u003e10-inch overall length for excellent leverage and control\u003c\/li\u003e\n\u003cli\u003e1‑1\/2-inch blade length\u003c\/li\u003e\n\u003cli\u003eAlso known as aviation snips\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall Length\u003c\/th\u003e\n\u003ctd\u003e10 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlade Length\u003c\/th\u003e\n\u003ctd\u003e1‑1\/2 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Cutting Capacity\u003c\/th\u003e\n\u003ctd\u003e18 gauge metal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlade Type\u003c\/th\u003e\n\u003ctd\u003eSerrated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAction Type\u003c\/th\u003e\n\u003ctd\u003eCompound action\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Grobet USA","offers":[{"title":"Default Title","offer_id":43581017784534,"sku":"153.836","price":53.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/grobet-compound-action-aviation-shears-otto-frei.jpg?v=1719957779"},{"product_id":"asic-mini-scissor-shears-5-5in-21-gauge","title":"Asic Mini Scissor Shears","description":"\u003cp\u003eThese compact 5-1\/2\" (140mm) shears are an excellent bench tool for cutting soft non-ferrous metals including silver, copper, and gold up to 21 gauge (0.7mm) thick. Designed with comfortable handles that accommodate both right- and left-handed users, they offer versatile, fatigue-friendly use during detailed metalsmithing and jewelry fabrication work. The stainless steel blades measure 1-7\/8\" (45mm) in length, providing precise control for trimming and shaping sheet metal at the bench.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCuts soft non-ferrous metals including silver, copper, and gold\u003c\/li\u003e\n\u003cli\u003eSuitable for metal up to 21 gauge (0.7mm) thick\u003c\/li\u003e\n\u003cli\u003eComfortable handles designed for both right- and left-handed use\u003c\/li\u003e\n\u003cli\u003eStainless steel blades for durability and clean cuts\u003c\/li\u003e\n\u003cli\u003eCompact overall length ideal for close, detail-oriented work\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall Length\u003c\/th\u003e\n\u003ctd\u003e5-1\/2\" (140mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlade Length\u003c\/th\u003e\n\u003ctd\u003e1-7\/8\" (45mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlade Material\u003c\/th\u003e\n\u003ctd\u003eStainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Cutting Capacity\u003c\/th\u003e\n\u003ctd\u003e21 gauge (0.7mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Materials\u003c\/th\u003e\n\u003ctd\u003eSoft non-ferrous metals (silver, copper, gold)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHandedness\u003c\/th\u003e\n\u003ctd\u003eRight- and left-handed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Asic","offers":[{"title":"Default Title","offer_id":43581126443222,"sku":"153.814","price":41.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/asic-mini-scissor-shears-otto-frei.jpg?v=1719957718"},{"product_id":"beverly-shear-b-1-lower-blade-adjusting-screws","title":"Beverly Shear B-1 Lower Blade Adjusting Screws","description":"\u003cp\u003eKeep your Beverly Shear B-1 performing at its best with these replacement lower blade adjusting screws. Proper blade adjustment is critical for clean, accurate cuts in sheet metal and other materials, and having the correct hardware on hand ensures minimal downtime when maintenance is needed. These screws are designed specifically for the Beverly Shear B-1 model, making them a practical addition to any jeweler's or metalsmith's toolkit.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReplacement lower blade adjusting screws for the Beverly Shear B-1\u003c\/li\u003e\n\u003cli\u003eSupport proper blade alignment and cutting performance\u003c\/li\u003e\n\u003cli\u003eAllow for precise adjustment of the lower blade on the B-1 shear\u003c\/li\u003e\n\u003cli\u003eEssential maintenance hardware for keeping your Beverly Shear B-1 in working order\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Model\u003c\/th\u003e\n\u003ctd\u003eBeverly Shear B-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eComponent\u003c\/th\u003e\n\u003ctd\u003eLower Blade Adjusting Screws\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eThese adjusting screws are intended specifically for the Beverly Shear B-1 model. Verify your shear model before ordering to ensure proper fit and function.\u003c\/p\u003e","brand":"Otto Frei","offers":[{"title":"Default Title","offer_id":43581994565846,"sku":"153.953","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/beverly-shear-b-1-lower-blade-adjusting-screws-otto-frei.jpg?v=1719957313"},{"product_id":"profiform-200-gear-wheel-replacement","title":"Profiform 200 Gear Wheel","description":"\u003cp\u003eThe Profiform 200 Gear Wheel is a precision replacement component designed to work in conjunction with the handle gear on the Profiform 200 forming and cutting system. This part is specially tempered to fail before more expensive internal components are damaged — functioning as a deliberate sacrificial element that protects the machine in the event of misalignment or overload.\u003c\/p\u003e\u003cp\u003eIf your Profiform 200 is out of adjustment, or if cutting limits have been exceeded, this gear wheel may fail as intended. Should you need to replace this part, it is strongly recommended that you consult your owner's manual or contact a qualified repair department to verify that your Profiform cutting blades are set up correctly before installing a new gear wheel.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMeshes directly with the handle gear of the Profiform 200\u003c\/li\u003e\n\u003cli\u003eSpecially tempered to act as a sacrificial component, failing before costlier parts sustain damage\u003c\/li\u003e\n\u003cli\u003eHelps protect the Profiform 200 from damage caused by misalignment or exceeded cutting limits\u003c\/li\u003e\n\u003cli\u003eGenuine replacement part for maintaining proper machine function\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eNotes\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Before replacing this gear wheel, consult your Profiform 200 owner's manual or contact a qualified repair department to confirm that cutting blades are correctly set up and adjusted. Replacing this part without addressing the underlying cause of failure may result in repeated damage.\u003c\/p\u003e","brand":"Profiform","offers":[{"title":"Default Title","offer_id":43581995811030,"sku":"153.401","price":40.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/profiform-200-gear-wheel-otto-frei.jpg?v=1719957313"},{"product_id":"profiform-200-handle-gear","title":"Profiform 200 Handle Gear","description":"\u003cp\u003eThe \u003cstrong\u003eProfiform 200 Handle Gear\u003c\/strong\u003e is a genuine replacement component designed for use with the Profiform 200 forming system. When the handle gear wears or becomes damaged, this part allows you to restore full function to your machine without replacing the entire unit—keeping your workflow uninterrupted in the studio or shop.\u003c\/p\u003e\u003cp\u003eThis gear is the mechanical interface between the handle and the forming machine's drive system. It is the component to which the handle attaches, making it an essential part of the Profiform 200's operation.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDirect replacement gear for the Profiform 200 forming system\u003c\/li\u003e\n\u003cli\u003eRestores handle function when the gear is worn or damaged\u003c\/li\u003e\n\u003cli\u003eAllows targeted repair without full machine replacement\u003c\/li\u003e\n\u003cli\u003eDesigned to integrate precisely with the Profiform 200 handle assembly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eNotes\u003c\/h3\u003e\u003cp\u003eThis listing is for the \u003cstrong\u003ehandle gear component only\u003c\/strong\u003e. The handle itself is sold separately. Confirm compatibility with your specific Profiform 200 model before ordering.\u003c\/p\u003e","brand":"Profiform","offers":[{"title":"Default Title","offer_id":43581997351126,"sku":"153.402","price":59.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/profiform-200-handle-gear-otto-frei.jpg?v=1719957309"},{"product_id":"beverly-shear-b-1-replacement-blades-upper-lower-pair","title":"Beverly Shear B-1 Replacement Blades","description":"\u003cp\u003eKeep your Beverly Shear B-1 cutting at peak performance with genuine replacement blades. This listing provides a matched upper and lower blade pair, ensuring proper fit and balanced cutting action when your original blades become worn or damaged.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReplacement upper and lower blade pair for the Beverly Shear B-1\u003c\/li\u003e\n\u003cli\u003eSold as a matched pair for consistent, balanced cutting performance\u003c\/li\u003e\n\u003cli\u003eDesigned as direct replacements to restore original shear function\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Model\u003c\/th\u003e\n\u003ctd\u003eBeverly Shear B-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncludes\u003c\/th\u003e\n\u003ctd\u003eUpper and lower blade (pair)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 upper replacement blade\u003c\/li\u003e\n\u003cli\u003e1 lower replacement blade\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Otto Frei","offers":[{"title":"Default Title","offer_id":43582036967638,"sku":"153.951","price":162.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/beverly-shear-b-1-replacement-blades-otto-frei.jpg?v=1719957290"},{"product_id":"bench-mounted-wire-cutting-jig-1mm-1-2mm-1-5mm-italy","title":"Bench Mounted Wire Cutting Jig-Made in Italy","description":"\u003cp\u003eThe Bench Mounted Wire Cutting Jig is a precision tool designed for jewelers and metalsmiths who require consistent, repeatable wire cuts in their bench work. Particularly well suited for granulation work and other techniques demanding exact wire lengths, this Italian-made jig brings professional-grade accuracy to fine wire cutting tasks.\u003c\/p\u003e\n\n\u003cp\u003eThree dedicated cutting holes accommodate wire diameters of 1.0mm (.040\"), 1.2mm (.047\"), and 1.5mm (.059\"). An adjustable cutting stop allows for repetitive cuts of the same length ranging from 8mm to 65mm (2‑1\/2\"). For cuts under 7mm — down to as small as 1mm — the stop is not in use; these smaller cuts can be made skillfully by hand and by sight after measuring and marking the wire beforehand.\u003c\/p\u003e\n\n\u003cp\u003eThe jig mounts securely to a workbench via a sturdy base with four mounting holes. It can also be removed from the base and mounted in a vise using the two hex nuts that attach the jig to the base. A hex key is included for locking the adjustable cutting stop.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This jig is not recommended for cutting hollow tubes unless the tubes are internally supported with wire. Mounting screws are not supplied.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThree cutting holes for 1.0mm (.040\"), 1.2mm (.047\"), and 1.5mm (.059\") wire\u003c\/li\u003e\n\u003cli\u003eAdjustable cutting stop for repetitive cuts from 8mm to 65mm (2‑1\/2\")\u003c\/li\u003e\n\u003cli\u003eCutting stop can be removed when not in use for smaller cuts\u003c\/li\u003e\n\u003cli\u003eCuts as small as 1mm achievable by hand measurement and marking\u003c\/li\u003e\n\u003cli\u003eBase features four holes for secure bench mounting\u003c\/li\u003e\n\u003cli\u003eJig detaches from base for vise mounting via two hex nuts\u003c\/li\u003e\n\u003cli\u003eIdeal for granulation work and precision wire preparation\u003c\/li\u003e\n\u003cli\u003eMade in Italy\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eWire Diameters\u003c\/th\u003e\n\u003ctd\u003e1.0mm (.040\"), 1.2mm (.047\"), 1.5mm (.059\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCutting Stop Range\u003c\/th\u003e\n\u003ctd\u003e8mm – 65mm (2‑1\/2\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase Dimensions\u003c\/th\u003e\n\u003ctd\u003e2‑3\/4\" x 3\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall Height\u003c\/th\u003e\n\u003ctd\u003e4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCutting Lever Length\u003c\/th\u003e\n\u003ctd\u003e~7\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eItaly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWire cutting jig with cutting lever\u003c\/li\u003e\n\u003cli\u003eMounting base\u003c\/li\u003e\n\u003cli\u003eHex key for locking the adjustable cutting stop\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMounting screws for bench installation are \u003cstrong\u003enot\u003c\/strong\u003e supplied\u003c\/li\u003e\n\u003cli\u003eNot recommended for cutting hollow tubes unless tubes are internally supported with wire\u003c\/li\u003e\n\u003cli\u003eCuts under 7mm are made by hand and by sight; the cutting stop is blocked by the cutting arm at this range\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Otto Frei","offers":[{"title":"Default Title","offer_id":43582038474966,"sku":"126.470","price":100.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/bench-mounted-wire-cutting-jig-made-in-italy-otto-frei.jpg?v=1719957290"},{"product_id":"durston-1195-heavy-duty-12-guillotine-shear","title":"Durston 1195 Heavy Duty 12\" Guillotine Shear","description":"\u003cp\u003eThe Durston 1195 Heavy Duty 12\" Guillotine Shear is a true workhorse built for the demands of professional jewelry shops and institutional use alike. Engineered to last a lifetime, this shear delivers precision, repeatability, and exceptional cutting capacity in a robust, well-designed package.\u003c\/p\u003e\n\u003cp\u003eCapable of cutting non-ferrous metal up to 300mm (12\") wide by 4mm (0.156\" \/ 8 gauge) thick, and mild steel up to 2.5mm (12 gauge) thick, this shear handles serious sheet metal work with ease. The precision ground, hardened, and tempered blade is designed for longevity—it can be rotated four times before sharpening is required, delivering an extended service life across heavy professional use.\u003c\/p\u003e\n\u003cp\u003eThe open back design accommodates sheet metal of any length, while the long pulling bar reduces the effort required for each cut. A front-mounted guard keeps the operator protected during use. The easy-to-read adjustable 12\" ruler rod with an adjustable stop enables repeatable cuts up to 12\" in length—simply remove the stop when longer cuts are needed. The squared front features two tightening screws for secure, consistent positioning.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCuts non-ferrous metal up to 300mm (12\") wide by 4mm (0.156\" \/ 8 gauge) thick\u003c\/li\u003e\n\u003cli\u003eCuts mild steel up to 2.5mm (12 gauge) thick\u003c\/li\u003e\n\u003cli\u003ePrecision ground, hardened, and tempered blade\u003c\/li\u003e\n\u003cli\u003eBlade rotates four times before sharpening is required\u003c\/li\u003e\n\u003cli\u003eOpen back design accepts sheet metal of any length\u003c\/li\u003e\n\u003cli\u003eLong pulling bar for reduced cutting effort\u003c\/li\u003e\n\u003cli\u003eFront-mounted blade guard for operator safety\u003c\/li\u003e\n\u003cli\u003eAdjustable 12\" ruler rod with removable stop for repeatable cuts\u003c\/li\u003e\n\u003cli\u003eSquared front with two tightening screws\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eDurston 1195\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Cut Width (Non-Ferrous)\u003c\/th\u003e\n\u003ctd\u003e300mm (12\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Cut Thickness (Non-Ferrous)\u003c\/th\u003e\n\u003ctd\u003e4mm (0.156\" \/ 8 gauge)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Cut Thickness (Mild Steel)\u003c\/th\u003e\n\u003ctd\u003e2.5mm (12 gauge)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase Dimensions\u003c\/th\u003e\n\u003ctd\u003e470mm x 210mm (18-1\/2\" x 8-1\/4\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall Dimensions (excluding handle)\u003c\/th\u003e\n\u003ctd\u003e625mm x 470mm (24-1\/2\" x 18-1\/2\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRuler Rod Capacity\u003c\/th\u003e\n\u003ctd\u003eUp to 12\" (adjustable stop; removable for longer cuts)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43582040539350,"sku":"153.909","price":2004.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-1195-heavy-duty-12-guillotine-shear-otto-frei.jpg?v=1719957290"},{"product_id":"profiform-320-bench-shear-bending-brake-12-5-inch","title":"Profiform 320 Basic Unit-12-1\/2\" Bench Shear And Bending Brake","description":"\u003cp\u003e\u003cstrong\u003eProfiform 320\u003c\/strong\u003e is a Swiss-made combination bench shear and bending brake engineered for larger sheet work. With a \u003cstrong\u003e320 mm (12-1\/2\") cutting width\u003c\/strong\u003e, it comfortably handles standard 12\" × 12\" sheets of copper, brass, and nickel silver (to ≈1.0 mm) as well as aluminum (to ≈1.5 mm). A strengthened frame and \u003cstrong\u003edual-sided gearing\u003c\/strong\u003e deliver smooth, consistent shearing and crisp, accurate bends. Two threaded mounting holes in the base allow you to bolt the unit securely to your bench for repeatable, precise results — making it an ideal bench tool for jewelry fabrication, metalsmithing, prototyping, and small-scale sheet metal work.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWider cutting capacity:\u003c\/strong\u003e 320 mm (12-1\/2\") cutting width accommodates common 12\" × 12\" sheet formats.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-sided gearing:\u003c\/strong\u003e Robust drive system delivers consistent shearing and bending force across the full cutting width.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwiss precision:\u003c\/strong\u003e Clean shears and accurate bends suited for jewelry, models, prototypes, and small fabrication.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBench-ready mounting:\u003c\/strong\u003e Two threaded holes in the base allow secure bolting to a work surface for repeatable results.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccessory-compatible:\u003c\/strong\u003e Accepts optional universal cutting table, angle stop, and aluminum alloy mounting plate for C-clamp mounting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eOperations\u003c\/th\u003e\n\u003ctd\u003eShearing and bending (brake)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax Cut Width\u003c\/th\u003e\n\u003ctd\u003e320 mm (12-1\/2\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax Thickness – Non-ferrous (Cu \/ Br \/ Ni-Ag)\u003c\/th\u003e\n\u003ctd\u003e≈1.0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax Thickness – Aluminum\u003c\/th\u003e\n\u003ctd\u003e≈1.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive \/ Mechanism\u003c\/th\u003e\n\u003ctd\u003eDual-sided gearing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eTwo threaded holes in base for bolting to bench\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCountry of Origin\u003c\/th\u003e\n\u003ctd\u003eSwitzerland\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProfiform 320 basic unit (combination bench shear and bending brake)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse within stated material thickness limits for best edge quality and tool longevity.\u003c\/li\u003e\n\u003cli\u003eSecure bench mounting is recommended for precise, repeatable work.\u003c\/li\u003e\n\u003cli\u003eOptional accessories — aluminum alloy mounting plate (C-clamp mounting), universal table, and angle stop — are sold separately.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Profiform","offers":[{"title":"Default Title","offer_id":43582105026774,"sku":"153.428","price":3265.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/profiform-320-basic-unit-12-12-bench-shear-and-bending-brake-otto-frei.jpg?v=1719957261"},{"product_id":"profiform-200-universal-table-shear","title":"Profiform 200 Universal Table For Shear","description":"\u003cp\u003eThe Profiform 200 Universal Table is a versatile accessory designed for use with the Profiform 200. It mounts nearly flush to the lower cutting blade for shearing operations and can also be repositioned to the lower frame when braking, folding, or punching. The included separate angle stop slides into the universal table, enabling precise and repeatable positioning of your workpiece for accurate results across a range of forming tasks.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMounts nearly flush to the lower cutting blade for shearing use\u003c\/li\u003e\n\u003cli\u003eCan also be mounted to the lower frame for braking, folding, or punching operations\u003c\/li\u003e\n\u003cli\u003eSeparate angle stop slides into the universal table for precise work positioning\u003c\/li\u003e\n\u003cli\u003eDesigned specifically as an accessory for the Profiform 200\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Profiform","offers":[{"title":"Default Title","offer_id":43582105714902,"sku":"153.441","price":285.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/profiform-200-universal-table-for-shear-otto-frei.jpg?v=1719957260"},{"product_id":"profiform-320-universal-table-shear-fold-brake","title":"Profiform 320 Universal Table For Shear","description":"\u003cp\u003eThe Profiform 320 Universal Table is a versatile accessory designed to expand the functionality of the Profiform 320. It can be mounted in three distinct positions to support a variety of metalworking operations. When shearing, the table can be slide-mounted to the front lower blade for a near-flush fit, or slide-mounted to the top back to extend the rear built-in table. It can also be mounted to the lower frame for use during folding, punching, or braking operations.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThree mounting positions for flexible use across multiple operations\u003c\/li\u003e\n\u003cli\u003eSlide mounts to the front lower blade for a near-flush fit during shearing\u003c\/li\u003e\n\u003cli\u003eSlide mounts to the top back to extend the rear built-in table\u003c\/li\u003e\n\u003cli\u003eMounts to the lower frame for folding, punching, or braking support\u003c\/li\u003e\n\u003cli\u003eDesigned specifically for the Profiform 320\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eThe angle stop is sold separately and is not included with this table.\u003c\/p\u003e","brand":"Profiform","offers":[{"title":"Default Title","offer_id":43582106566870,"sku":"153.442","price":328.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/profiform-320-universal-table-for-shear-otto-frei.jpg?v=1719957261"},{"product_id":"profiform-200-320-punch-holder","title":"Profiform 200-320 Punch Holder","description":"\u003cp\u003eThe Profiform 200-320 Punch Holder is a required accessory for use with hole punches and venting and grooving tools on the Profiform 200 and Profiform 320 systems. Built-in depth and side stops allow for precise, repeatable stampings — making this holder especially valuable for production work where consistency across multiple pieces is essential. The holder set includes a die holder with stops along with a punch and stripper holder.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRequired for use with hole punches and venting and grooving tools on compatible Profiform systems\u003c\/li\u003e\n\u003cli\u003eBuilt-in depth stops enable consistent, repeatable results across production runs\u003c\/li\u003e\n\u003cli\u003eBuilt-in side stops ensure accurate alignment for identical stampings\u003c\/li\u003e\n\u003cli\u003eCompatible with both the Profiform 200 and the Profiform 320\u003c\/li\u003e\n\u003cli\u003eIncludes die holder with stops and a punch and stripper holder\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Systems\u003c\/th\u003e\n\u003ctd\u003eProfiform 200, Profiform 320\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVariants\u003c\/th\u003e\n\u003ctd\u003eSingle configuration — no options\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDie holder with depth and side stops\u003c\/li\u003e\n\u003cli\u003ePunch and stripper holder\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Profiform","offers":[{"title":"Default Title","offer_id":43582107156694,"sku":"153.430","price":323.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/profiform-200-320-punch-holder-otto-frei.jpg?v=1719957257"},{"product_id":"profiform-320-aluminum-mounting-plate-500mm","title":"Profiform 320 Aluminum Mounting Plate","description":"\u003cp\u003eThe Profiform 320 Aluminum Mounting Plate is an optional accessory designed specifically for securing your Profiform 320 to a workbench. The plate flush-mounts to the underside of the Profiform 320 using the two included bolts, providing a stable foundation for everyday bench use.\u003c\/p\u003e\n\u003cp\u003eOnce installed, the oversized plate gives you two mounting options: use standard C-clamps (not included) for temporary or repositionable setups, or take advantage of the holes at each end of the plate for permanent bench installation. At 500 mm in length, the plate extends beyond the machine footprint to accommodate either mounting method with ease.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for use with the Profiform 320\u003c\/li\u003e\n\u003cli\u003eFlush-mounts to the underside of the Profiform 320 using included bolts\u003c\/li\u003e\n\u003cli\u003eCompatible with standard C-clamps for temporary or repositionable bench mounting\u003c\/li\u003e\n\u003cli\u003eHoles at each end allow for permanent bench installation\u003c\/li\u003e\n\u003cli\u003eOversized footprint provides added stability during use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e500 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Machine\u003c\/th\u003e\n\u003ctd\u003eProfiform 320\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncludes\u003c\/th\u003e\n\u003ctd\u003e2 mounting bolts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 aluminum mounting plate\u003c\/li\u003e\n\u003cli\u003e2 flush-mount bolts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eThis mounting plate is designed exclusively for use with the \u003cstrong\u003eProfiform 320\u003c\/strong\u003e. C-clamps are not included and must be sourced separately; any standard C-clamp is compatible.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eC-clamps are \u003cstrong\u003enot included\u003c\/strong\u003e. This plate is an optional accessory—it is not required for standard Profiform 320 operation.\u003c\/p\u003e","brand":"Profiform","offers":[{"title":"Default Title","offer_id":43582107910358,"sku":"153.438","price":110.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/profiform-320-aluminum-mounting-plate-otto-frei.jpg?v=1719957256"},{"product_id":"profiform-200-320-angle-stop-shear","title":"Profiform 200\/320 Angle Stop For Shear","description":"\u003cp\u003eThe Profiform 200\/320 Angle Stop is a popular optional accessory designed for use with the optional universal tables for the Profiform 200 and Profiform 320 machines. This precision tool slides into the grooves of either universal table — model 153.441 for the P-200 or model 153.442 for the P-320 — enabling accurate angle measurement during shearing operations.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSlides into the grooves of compatible universal tables for secure, repeatable positioning\u003c\/li\u003e\n\u003cli\u003eEnables precise angle measurement while shearing\u003c\/li\u003e\n\u003cli\u003eCompatible with both the Profiform 200 (universal table 153.441) and the Profiform 320 (universal table 153.442)\u003c\/li\u003e\n\u003cli\u003ePopular optional addition for professionals seeking greater accuracy and consistency\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eThe universal tables (153.441 and 153.442) are sold separately and are required for use with this angle stop. Verify which Profiform model you own before ordering to ensure you have the appropriate universal table.\u003c\/p\u003e","brand":"Profiform","offers":[{"title":"Default Title","offer_id":43582108532950,"sku":"153.443","price":64.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/profiform-200320-angle-stop-for-shear-otto-frei-1.jpg?v=1719957256"},{"product_id":"profiform-corner-cropping-tool-set-1x1-70x70mm","title":"Profiform Corner Cropping Tool Set (Requires Punch Holder 153.430)","description":"\u003cp\u003eThe Profiform Corner Cropping Tool Set is designed for precise cutting and notching of sheet metal corners. The set consists of a hardened punch and a hardened die with an integrated punch guide, engineered for clean, accurate corner removal across a wide range of dimensions. This tool must be used with the punch holder, part No. 153.430 (sold separately).\u003c\/p\u003e\u003cp\u003eCorner notches from 1 x 1 mm up to 70 x 70 mm can be achieved, with capacity extending up to 100 x 100 mm when used with the Profiform 320. Corners measuring up to 12 x 12 mm can be notched out in a single operation; larger dimensions are completed in multiple steps, allowing precise control over the final result.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHardened punch and hardened die for durability and consistent performance\u003c\/li\u003e\n\u003cli\u003eIntegrated punch guide for accurate alignment during operation\u003c\/li\u003e\n\u003cli\u003eNotches corners from 1 x 1 mm up to 70 x 70 mm\u003c\/li\u003e\n\u003cli\u003eCapacity up to 100 x 100 mm when used with the Profiform 320\u003c\/li\u003e\n\u003cli\u003eCorners up to 12 x 12 mm notched in a single operation\u003c\/li\u003e\n\u003cli\u003eLarger dimensions achievable in multiple sequential steps\u003c\/li\u003e\n\u003cli\u003eCompatible with a broad range of sheet metal stock\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eCorner Size Range\u003c\/th\u003e\n\u003ctd\u003e1 x 1 mm – 70 x 70 mm (up to 100 x 100 mm with Profiform 320)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSingle-Operation Capacity\u003c\/th\u003e\n\u003ctd\u003eUp to 12 x 12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePunch Construction\u003c\/th\u003e\n\u003ctd\u003eHardened steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDie Construction\u003c\/th\u003e\n\u003ctd\u003eHardened steel with integrated punch guide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRequired Accessory\u003c\/th\u003e\n\u003ctd\u003ePunch Holder, Part No. 153.430 (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eNotes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePunch holder Part No. 153.430 is required for use and is sold separately.\u003c\/li\u003e\n\u003cli\u003eDimensions larger than 12 x 12 mm require multiple steps to complete the notch.\u003c\/li\u003e\n\u003cli\u003eCorner capacity extends to 100 x 100 mm only when used with the Profiform 320.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Profiform","offers":[{"title":"Default Title","offer_id":43582109155542,"sku":"153.431","price":206.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/profiform-corner-cropping-tool-set-requires-punch-holder-153-430-otto-frei.jpg?v=1719957257"},{"product_id":"vallorbe-jewelers-snips-cb3000-200-m1","title":"Vallorbe Jewelers Snips","description":"\u003cp\u003eThe Vallorbe Jewelers Snips (CB3000-200-M1) deliver ultra-versatile, extremely clean cutting performance for professional jewelers and metalsmiths. Engineered by Glardon-Vallorbe in Switzerland, these snips are designed to cut fine strips of metal precisely and without deformation — a critical requirement when working with precious metals and delicate sheet stock.\u003c\/p\u003e\u003cp\u003eMeasuring 8-1\/4\" in length with lockable jaws for safe storage and controlled handling, these snips are rated across a range of materials and thicknesses, making them a reliable all-around cutting tool for the professional bench.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCuts fine metal strips precisely and without deformation\u003c\/li\u003e\n\u003cli\u003eRecommended for all precious metals\u003c\/li\u003e\n\u003cli\u003eLockable jaws for safe, controlled use and storage\u003c\/li\u003e\n\u003cli\u003eUltra-versatile design suited to a wide range of sheet metals and wire\u003c\/li\u003e\n\u003cli\u003eMade in Switzerland by Glardon-Vallorbe\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eCB3000-200-M1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall Length\u003c\/th\u003e\n\u003ctd\u003e8-1\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eJaw Feature\u003c\/th\u003e\n\u003ctd\u003eLockable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMild Steel Capacity\u003c\/th\u003e\n\u003ctd\u003eUp to 0.5 mm thick (35 HRC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrass Sheet Capacity\u003c\/th\u003e\n\u003ctd\u003eUp to 1.0 mm thick\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eZinc Alloy Sheet Capacity\u003c\/th\u003e\n\u003ctd\u003eUp to 1.3 mm thick\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrass Alloy Wire Capacity\u003c\/th\u003e\n\u003ctd\u003eUp to 2.0 mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCountry of Origin\u003c\/th\u003e\n\u003ctd\u003eSwitzerland\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Glardon-Vallorbe","offers":[{"title":"Default Title","offer_id":43582170824918,"sku":"153.834","price":175.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/vallorbe-jewelers-snips-otto-frei.jpg?v=1719957211"},{"product_id":"bench-shear-6-inch-10-gauge","title":"Bench Shear 6\"","description":"\u003cp\u003eThis 6\" bench shear delivers outstanding value for professional jewelers and metalsmiths who need a capable, heavy-duty cutting tool for sheet metal and rod stock. Cutting blades are manufactured from high-temper carbon steel and handle sheet metal up to 10 gauge (0.100\" \/ 2.6 mm) thick. The 6\" blade length accommodates cuts up to approximately 4-1\/2\" in a single pass.\u003c\/p\u003e\u003cp\u003eA hole in the side of the shear accepts round rod stock up to 3\/8\" in diameter. An adjustable support rod helps hold sheet material in position for more controlled cuts. The extra-long 24\" handle provides the leverage needed when working through thicker stock. While this style of long-handle bench shear is not as precise as guillotine-style shears, it excels at quickly cutting smaller pieces of thicker material. Longer straight cuts require careful technique to maintain accuracy.\u003c\/p\u003e\u003cp\u003eThe shear must be securely mounted to a workbench before use. Mounting requires 4 nuts and bolts, which are not included.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHigh-temper carbon steel cutting blades\u003c\/li\u003e\n\u003cli\u003eCuts sheet metal up to 10 gauge (0.100\" \/ 2.6 mm) thick\u003c\/li\u003e\n\u003cli\u003e6\" blade length — maximum cut length approximately 4-1\/2\"\u003c\/li\u003e\n\u003cli\u003eSide hole accommodates round rod stock up to 3\/8\" diameter\u003c\/li\u003e\n\u003cli\u003eAdjustable support rod for sheet positioning\u003c\/li\u003e\n\u003cli\u003eExtra-long 24\" handle for increased cutting leverage\u003c\/li\u003e\n\u003cli\u003eBench-mount design for stable, controlled use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eBlade Length\u003c\/th\u003e\n\u003ctd\u003e6\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Cut Length\u003c\/th\u003e\n\u003ctd\u003eApproximately 4-1\/2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Sheet Thickness\u003c\/th\u003e\n\u003ctd\u003e10 gauge (0.100\" \/ 2.6 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Rod Diameter\u003c\/th\u003e\n\u003ctd\u003e3\/8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHandle Length\u003c\/th\u003e\n\u003ctd\u003e24\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFootprint\u003c\/th\u003e\n\u003ctd\u003e11-1\/4\" x 5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall Height (handle extended)\u003c\/th\u003e\n\u003ctd\u003e34\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlade Material\u003c\/th\u003e\n\u003ctd\u003eHigh-temper carbon steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting Hardware\u003c\/th\u003e\n\u003ctd\u003eNot included (requires 4 nuts and bolts)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eNotes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eShear must be securely mounted to a workbench before use — bench mounting hardware is not included.\u003c\/li\u003e\n\u003cli\u003eLong-handle bench shears are well suited to quickly cutting smaller pieces of thicker material; longer straight cuts require careful technique.\u003c\/li\u003e\n\u003cli\u003eGeneric usage instructions can be found online by searching \u003cem\u003ebench shear instructions\u003c\/em\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Value Line","offers":[{"title":"Default Title","offer_id":43582263558358,"sku":"153.931-6","price":245.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/bench-shear-6-otto-frei-1.jpg?v=1719957142"},{"product_id":"bench-shear-8-inch-carbon-steel","title":"Bench Shear 8\"","description":"\u003cp\u003eThe 8\" Bench Shear is a sturdy, workhorse cutting tool built for jewelers and metalsmiths who need reliable performance when cutting plate and rod stock. Cutting blades are manufactured from high-temper carbon steel, allowing the shear to cut sheet metal up to 10 gauge (0.100\" \/ 2.6mm) thick. The 8\" blade length accommodates a maximum cut length of approximately 5-3\/4\". A hole in the side of the shear accepts rods up to 3\/8\" in diameter. An adjustable support rod helps hold sheet material in position during cuts, and the extra-long 24\" handle provides the leverage needed to cut through thicker metals with less effort.\u003c\/p\u003e\u003cp\u003eThis style of long-handle bench shear excels at quickly cutting smaller pieces of thicker material. While not as dimensionally precise as guillotine-style bench shears, it is a practical and efficient choice for production and shop use. Longer straight cuts on sheet stock require careful technique to achieve clean results.\u003c\/p\u003e\u003cp\u003eThe shear must be securely mounted to a workbench for proper and safe operation. Mounting requires 4 nuts and bolts, which are not included.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHigh-temper carbon steel cutting blades for durability and edge retention\u003c\/li\u003e\n\u003cli\u003eCuts sheet metal up to 10 gauge (0.100\" \/ 2.6mm) thick\u003c\/li\u003e\n\u003cli\u003eMaximum cut length of approximately 5-3\/4\"\u003c\/li\u003e\n\u003cli\u003eSide hole for cutting rod stock up to 3\/8\" in diameter\u003c\/li\u003e\n\u003cli\u003eAdjustable support rod assists in positioning sheet material\u003c\/li\u003e\n\u003cli\u003eExtra-long 24\" handle provides increased cutting leverage\u003c\/li\u003e\n\u003cli\u003eWell-suited for quickly cutting smaller pieces of thicker material\u003c\/li\u003e\n\u003cli\u003eMust be bench-mounted for proper use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eBlade Material\u003c\/th\u003e\n\u003ctd\u003eHigh-temper carbon steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlade Length\u003c\/th\u003e\n\u003ctd\u003e8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Cut Length\u003c\/th\u003e\n\u003ctd\u003eApproximately 5-3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Sheet Capacity\u003c\/th\u003e\n\u003ctd\u003e10 gauge (0.100\" \/ 2.6mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Rod Capacity\u003c\/th\u003e\n\u003ctd\u003e3\/8\" diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHandle Length\u003c\/th\u003e\n\u003ctd\u003e24\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFootprint\u003c\/th\u003e\n\u003ctd\u003e14\" x 5-1\/2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight (handle extended)\u003c\/th\u003e\n\u003ctd\u003e34\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eIndia\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eNotes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe shear must be securely mounted to a workbench before use — bench mounting is required for safe operation.\u003c\/li\u003e\n\u003cli\u003eMounting hardware (4 nuts and bolts) is \u003cstrong\u003enot included\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eThis long-handle style shear is better suited for cutting smaller pieces of thicker material than for executing long, precision straight cuts on sheet stock.\u003c\/li\u003e\n\u003cli\u003eGeneric instructions for use can be found online by searching for \u003cem\u003ebench shear instructions\u003c\/em\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Otto Frei","offers":[{"title":"Default Title","offer_id":43582263853270,"sku":"153.931-8","price":295.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/bench-shear-8-otto-frei-1.jpg?v=1719957142"},{"product_id":"german-aviation-shears-compound-action-18-gauge","title":"German Aviation Shears","description":"\u003cp\u003eThese compound action aviation shears deliver clean, precise cuts through sheet metal up to 18 gauge thick. Built for demanding metalsmithing and fabrication work, the super-strong serrated blades grip and slice through material without distortion, giving jewelers and metalsmiths the control they need on the bench. Also known as aviation snips, these shears are a reliable cutting tool for sheet metal work.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCompound action mechanism multiplies cutting force for easier, fatigue-reducing cuts\u003c\/li\u003e\n\u003cli\u003eSerrated blades cut clean and strong through sheet metal\u003c\/li\u003e\n\u003cli\u003eCapable of cutting metal up to 18 gauge thick\u003c\/li\u003e\n\u003cli\u003eAlso known as aviation snips\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall Length\u003c\/th\u003e\n\u003ctd\u003e10 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlade Length\u003c\/th\u003e\n\u003ctd\u003e1‑1\/2 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Cutting Capacity\u003c\/th\u003e\n\u003ctd\u003e18 gauge metal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAction Type\u003c\/th\u003e\n\u003ctd\u003eCompound action\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlade Type\u003c\/th\u003e\n\u003ctd\u003eSerrated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eGermany\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Otto Frei","offers":[{"title":"Default Title","offer_id":43582276534486,"sku":"153.837","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/153.837NEW_thumb_eb43d922-5e37-4f0b-b26b-ac2e94b6f70a.jpg?v=1721162529"},{"product_id":"profiform-200-master-kit-complete-accessories","title":"Profiform 200 Master Kit-Complete With All Accessories","description":"\u003cp\u003e\u003cstrong\u003eProfiform 200 Master Kit\u003c\/strong\u003e is the complete Swiss-made metal forming system. Centered on the Profiform 200 combination bench shear and bending brake, this kit includes every factory accessory so you can shear, bend, crop, punch round and square holes, form louvers and reinforcement beads, set boxed and bullnose edges, and make accurate, repeatable cuts from one compact workstation.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eShears sheet up to 7-3\/4\" (200 mm) wide\u003c\/li\u003e\n\u003cli\u003eCuts non-ferrous metals (gold, silver, copper, brass) to approximately 18 ga (≈1.0 mm); aluminum and other soft materials to ≈1.5 mm\u003c\/li\u003e\n\u003cli\u003ePrecision-ground, hardened reversible high-speed steel cutters with four cutting edges\u003c\/li\u003e\n\u003cli\u003eHigh-grade profiled steel V-blocks and punches for crisp, repeatable bends\u003c\/li\u003e\n\u003cli\u003eHandles metals, plastics, paper, cardboard, PCB, veneer, and more within stated thicknesses\u003c\/li\u003e\n\u003cli\u003eRound punches in six sizes (3–10 mm) for clean, precise holes\u003c\/li\u003e\n\u003cli\u003eSquare 4-corner punches in five sizes (4×4 mm through 12×12 mm) plus a 4×20 mm slot punch\u003c\/li\u003e\n\u003cli\u003eLouver sets in two profiles and a reinforcement bead set for structural forming\u003c\/li\u003e\n\u003cli\u003eBoxing tool set for safe bullnose and boxed-edge bending\u003c\/li\u003e\n\u003cli\u003eCorner cropping tool set for box construction prep\u003c\/li\u003e\n\u003cli\u003eUniversal table mounts on top (shear) or bottom (brake) for versatile work support\u003c\/li\u003e\n\u003cli\u003eAngle stop enables precise, repeatable angled positioning on the universal table\u003c\/li\u003e\n\u003cli\u003eTwo shear stops (basic and double-sided) for consistent, repeatable straight-length cuts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Shear Width\u003c\/th\u003e\n\u003ctd\u003e7-3\/4\" (200 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity – Non-Ferrous Metals\u003c\/th\u003e\n\u003ctd\u003eApproximately 18 ga (≈1.0 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity – Aluminum \/ Soft Materials\u003c\/th\u003e\n\u003ctd\u003e≈1.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCutter Type\u003c\/th\u003e\n\u003ctd\u003eReversible high-speed steel, precision-ground, hardened, four cutting edges\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eSwitzerland\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVariant Count\u003c\/th\u003e\n\u003ctd\u003e1 (complete master kit)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003cth\u003eItem\u003c\/th\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.400\u003c\/td\u003e\n\u003ctd\u003eProfiform 200 Basic Unit (Shear \u0026amp; Brake)\u003c\/td\u003e\n\u003ctd\u003eShearing and bending core machine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.403\u003c\/td\u003e\n\u003ctd\u003eRound Punch 3 mm\u003c\/td\u003e\n\u003ctd\u003eClean round holes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.404\u003c\/td\u003e\n\u003ctd\u003eRound Punch 4 mm\u003c\/td\u003e\n\u003ctd\u003eClean round holes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.405\u003c\/td\u003e\n\u003ctd\u003eRound Punch 5 mm\u003c\/td\u003e\n\u003ctd\u003eClean round holes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.406\u003c\/td\u003e\n\u003ctd\u003eRound Punch 6 mm\u003c\/td\u003e\n\u003ctd\u003eClean round holes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.408\u003c\/td\u003e\n\u003ctd\u003eRound Punch 8 mm\u003c\/td\u003e\n\u003ctd\u003eClean round holes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.410\u003c\/td\u003e\n\u003ctd\u003eRound Punch 10 mm\u003c\/td\u003e\n\u003ctd\u003eClean round holes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.414\u003c\/td\u003e\n\u003ctd\u003e4-Corner Punch 4 × 4 mm\u003c\/td\u003e\n\u003ctd\u003eSquare\/rectangular corner and slot punching\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.416\u003c\/td\u003e\n\u003ctd\u003e4-Corner Punch 6 × 6 mm\u003c\/td\u003e\n\u003ctd\u003eSquare\/rectangular corner and slot punching\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.418\u003c\/td\u003e\n\u003ctd\u003e4-Corner Punch 8 × 8 mm\u003c\/td\u003e\n\u003ctd\u003eSquare\/rectangular corner and slot punching\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.420\u003c\/td\u003e\n\u003ctd\u003e4-Corner Punch 10 × 10 mm\u003c\/td\u003e\n\u003ctd\u003eSquare\/rectangular corner and slot punching\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.422\u003c\/td\u003e\n\u003ctd\u003e4-Corner Punch 12 × 12 mm\u003c\/td\u003e\n\u003ctd\u003eSquare\/rectangular corner and slot punching\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.424\u003c\/td\u003e\n\u003ctd\u003e4 × 20 mm Slot\/Corner Punch\u003c\/td\u003e\n\u003ctd\u003eSquare\/rectangular corner and slot punching\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.425\u003c\/td\u003e\n\u003ctd\u003eBasic Shear Stop\u003c\/td\u003e\n\u003ctd\u003eRepeatable straight-length cuts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.430\u003c\/td\u003e\n\u003ctd\u003ePunch Tool Holder\u003c\/td\u003e\n\u003ctd\u003eAccepts all round, 4-corner, and corner-crop punches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.431\u003c\/td\u003e\n\u003ctd\u003eCorner Cropping Tool Set\u003c\/td\u003e\n\u003ctd\u003eTrims corners for box construction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.432\u003c\/td\u003e\n\u003ctd\u003eForming Tool Holder\u003c\/td\u003e\n\u003ctd\u003eAccepts louver and reinforcement tools\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.433\u003c\/td\u003e\n\u003ctd\u003eLouver Set 1.5 × 35 mm\u003c\/td\u003e\n\u003ctd\u003eForm vent louvers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.434\u003c\/td\u003e\n\u003ctd\u003eLouver Set 2.5 × 35 mm\u003c\/td\u003e\n\u003ctd\u003eForm vent louvers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.435\u003c\/td\u003e\n\u003ctd\u003eReinforcement Set 1.0 × 35 mm\u003c\/td\u003e\n\u003ctd\u003eCreate stiffening beads and ribs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.436\u003c\/td\u003e\n\u003ctd\u003eBoxing Tool Set\u003c\/td\u003e\n\u003ctd\u003eBends sharp edges into safe bullnose ends\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.441\u003c\/td\u003e\n\u003ctd\u003eUniversal Table\u003c\/td\u003e\n\u003ctd\u003eWork support; mounts top (shear) or bottom (brake)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.443\u003c\/td\u003e\n\u003ctd\u003eAngle Stop (fits Universal Table)\u003c\/td\u003e\n\u003ctd\u003ePrecise, repeatable angled positioning\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.444\u003c\/td\u003e\n\u003ctd\u003eDouble-Sided Shear Stop\u003c\/td\u003e\n\u003ctd\u003eRepeatable cuts on different shapes and widths\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse the Universal Table with the Angle Stop for longer pieces and repeatable angled shears.\u003c\/li\u003e\n\u003cli\u003eIndex cutters to a fresh edge to maintain clean shears and prolong tool life.\u003c\/li\u003e\n\u003cli\u003eOperate within stated material thicknesses for best results.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Profiform","offers":[{"title":"Default Title","offer_id":43582784962774,"sku":"153.399","price":4635.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/profiform-200-master-kit-complete-with-all-accessories-otto-frei-1.jpg?v=1719956855"},{"product_id":"profiform-320-bench-shear-bending-brake-13-piece-hole-punch-kit","title":"Profiform 320 Basic Unit Plus 13 Piece Hole Punch Kit","description":"\u003cp\u003eThe \u003cstrong\u003eProfiform 320 Basic Unit Plus 13-Piece Hole Punch Kit\u003c\/strong\u003e combines a bench shear and bending brake with a complete hole punching solution for professional sheet metal work at the bench. With a \u003cstrong\u003e320 mm (12-1\/2″)\u003c\/strong\u003e cutting width, the Profiform 320 handles standard 12″ × 12″ sheets of copper, brass, and nickel silver (to approximately 1.0 mm) as well as aluminum (to approximately 1.5 mm). A strengthened frame with \u003cstrong\u003edual-sided gearing\u003c\/strong\u003e delivers smooth, consistent shearing force and crisp, accurate bends. Two threaded holes in the base allow secure bench mounting for precise, repeatable work. The bundled \u003cstrong\u003e13-piece hole punch kit\u003c\/strong\u003e adds clean, repeatable hole punching capability without a separate tool investment.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide cutting capacity:\u003c\/strong\u003e 320 mm (12-1\/2″) cut width accommodates common 12″ × 12″ sheet formats.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShear and brake in one unit:\u003c\/strong\u003e Clean shearing plus accurate bending for jewelry fabrication, prototyping, and small-scale metalwork.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-sided gearing:\u003c\/strong\u003e Strengthened drive system provides consistent force and control throughout the cut.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwiss-made precision:\u003c\/strong\u003e Ground tooling delivers quality edges and bends.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecure bench mounting:\u003c\/strong\u003e Two threaded mounting points in the base for hard-mounting to your workbench.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBundled hole punch kit:\u003c\/strong\u003e 13-piece kit includes punch holder with assorted round and corner punches for clean, repeatable holes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eMax Cut Width\u003c\/th\u003e\n\u003ctd\u003e12-1\/2″ (320 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax Thickness – Non-Ferrous (Cu\/Br\/Ni-Ag)\u003c\/th\u003e\n\u003ctd\u003e≈ 1.0 mm (≈ 18 ga)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax Thickness – Aluminum\u003c\/th\u003e\n\u003ctd\u003e≈ 1.5 mm (≈ 1\/16″)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMechanism\u003c\/th\u003e\n\u003ctd\u003eDual-sided gearing for shearing and bending\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOperations\u003c\/th\u003e\n\u003ctd\u003eShearing, bending; hole punching with included kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCountry of Origin\u003c\/th\u003e\n\u003ctd\u003eSwitzerland\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProfiform 320 basic unit (combination bench shear and bending brake)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e13-piece Hole Punch Kit:\u003c\/strong\u003e punch holder with assorted round and corner punches for clean, repeatable holes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse within stated material width and thickness limits for best edge quality and tool longevity.\u003c\/li\u003e\n\u003cli\u003eSecure bench mounting is recommended for precise, repeatable work.\u003c\/li\u003e\n\u003cli\u003eCompatible accessories—including an aluminum alloy mounting plate, Universal Table, and Angle Stop—are available separately.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Profiform","offers":[{"title":"Default Title","offer_id":43582785978582,"sku":"153.426","price":4845.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/profiform-320-basic-unit-plus-13-piece-hole-punch-kit-otto-frei.jpg?v=1719956855"},{"product_id":"profiform-320-master-kit-complete-accessories","title":"Profiform 320 Master Kit-Complete With All Accessories","description":"\u003cp\u003eThe \u003cstrong\u003eProfiform 320 Master Kit\u003c\/strong\u003e is a complete Swiss-made metal forming workstation built around the Profiform 320 combination bench shear and bending brake. Every factory accessory is included—punches, holders, forming tools, stops, and mounting hardware—so you can shear, bend, crop, punch, form louvers and reinforcements, set boxing and bullnose edges, and make repeatable, accurate cuts from one compact, bench-mounted system.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete out of the box:\u003c\/strong\u003e All punches, holders, forming tools, stops, and mounting hardware are included—nothing extra to source separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwiss precision mechanism:\u003c\/strong\u003e Strengthened dual-sided gearing drive delivers clean shears and crisp, accurate bends.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge sheet capacity:\u003c\/strong\u003e Handles common \u003cstrong\u003e12″ × 12″\u003c\/strong\u003e sheet formats with ease up to 12-1\/2″ cut width.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBench-ready and modular:\u003c\/strong\u003e Two threaded holes in the base allow rigid bench bolt-down; the included Aluminum Mounting Plate enables quick C-clamp setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile forming operations:\u003c\/strong\u003e Punching (round, square, rectangular), corner cropping, louver forming, reinforcement beading, and bullnose edge boxing all supported.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepeatable positioning:\u003c\/strong\u003e Basic Shear Stop, Double-Sided Shear Stop, and Angle Stop on the Universal Table enable consistent, indexed cuts and bends.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eMax Cut Width\u003c\/th\u003e\n\u003ctd\u003e12-1\/2″ (320 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax Thickness – Non-ferrous (Cu\/Br\/Ni-Ag)\u003c\/th\u003e\n\u003ctd\u003e≈ 1.0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax Thickness – Aluminum\u003c\/th\u003e\n\u003ctd\u003e≈ 1.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMechanism\u003c\/th\u003e\n\u003ctd\u003eDual-sided gearing for shearing and bending\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eTwo threaded holes in base (bench bolt-down)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eSwitzerland\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003cth\u003eItem\u003c\/th\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.428\u003c\/td\u003e\n\u003ctd\u003eProfiform 320 Basic Unit (Shear \u0026amp; Brake)\u003c\/td\u003e\n\u003ctd\u003eShearing and bending core machine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.430\u003c\/td\u003e\n\u003ctd\u003ePunch Tool Holder\u003c\/td\u003e\n\u003ctd\u003eHolds round, 4-corner, and corner-crop tools\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.403–410\u003c\/td\u003e\n\u003ctd\u003eRound Punch Set (3, 4, 5, 6, 8, 10 mm)\u003c\/td\u003e\n\u003ctd\u003eClean round holes in sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.414–424\u003c\/td\u003e\n\u003ctd\u003e4-Corner Punches (4×4, 6×6, 8×8, 10×10, 12×12, 4×20 mm)\u003c\/td\u003e\n\u003ctd\u003eSquare and rectangular corner punching\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.442\u003c\/td\u003e\n\u003ctd\u003eUniversal Table\u003c\/td\u003e\n\u003ctd\u003eWork support for long or large pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.443\u003c\/td\u003e\n\u003ctd\u003eAngle Stop (for Universal Table)\u003c\/td\u003e\n\u003ctd\u003ePrecise, repeatable angle positioning\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.431\u003c\/td\u003e\n\u003ctd\u003eCorner Cropping Tool Set\u003c\/td\u003e\n\u003ctd\u003eTrims corners for box construction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.425\u003c\/td\u003e\n\u003ctd\u003eBasic Shear Stop\u003c\/td\u003e\n\u003ctd\u003eRepeatable straight-length cuts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.445\u003c\/td\u003e\n\u003ctd\u003eDouble-Sided Shear Stop\u003c\/td\u003e\n\u003ctd\u003eRepeatable cuts on different shapes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.432\u003c\/td\u003e\n\u003ctd\u003eForming Tool Holder\u003c\/td\u003e\n\u003ctd\u003eAccepts louver and reinforcement tools\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.433\u003c\/td\u003e\n\u003ctd\u003eLouver Set 1.5 × 35 mm\u003c\/td\u003e\n\u003ctd\u003eVent and louver forming\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.434\u003c\/td\u003e\n\u003ctd\u003eLouver Set 2.5 × 35 mm\u003c\/td\u003e\n\u003ctd\u003eVent and louver forming\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.435\u003c\/td\u003e\n\u003ctd\u003eReinforcement Set 1.0 × 35 mm\u003c\/td\u003e\n\u003ctd\u003eStiffening beads and ribs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.437\u003c\/td\u003e\n\u003ctd\u003eBoxing Tool Set\u003c\/td\u003e\n\u003ctd\u003eForms safe bullnose (boxed) edges\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e153.438\u003c\/td\u003e\n\u003ctd\u003eAluminum Mounting Plate\u003c\/td\u003e\n\u003ctd\u003eQuick clamp-on bench mounting via C-clamps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse the \u003cstrong\u003eUniversal Table\u003c\/strong\u003e with the \u003cstrong\u003eAngle Stop\u003c\/strong\u003e when working with longer sheets or for repeatable angled shear operations.\u003c\/li\u003e\n\u003cli\u003eIndex to a fresh cutting edge on the blades periodically to maintain clean shears and extend tool life.\u003c\/li\u003e\n\u003cli\u003eRigid bench mounting is recommended for best performance; use the included \u003cstrong\u003eAluminum Mounting Plate\u003c\/strong\u003e for C-clamp setups where bolt-down is not possible.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Profiform","offers":[{"title":"Default Title","offer_id":43582786961622,"sku":"153.427","price":6365.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/profiform-320-master-kit-complete-with-all-accessories-otto-frei-1.jpg?v=1719956855"},{"product_id":"profiform-200-bench-shear-bending-brake-13-piece-hole-punch-kit","title":"Profiform 200 Basic Unit Plus 13 Piece Hole Punch Kit","description":"\u003cp\u003eThe \u003cstrong\u003eProfiform 200 Basic Unit Plus 13-Piece Hole Punch Kit\u003c\/strong\u003e combines the Swiss-made bench shear and bending brake with a complete hole punch attachment for fast, precise sheet cutting and aperture punching at the bench. Cleanly shear sheet up to \u003cstrong\u003e200 mm (7-3\/4″)\u003c\/strong\u003e wide, form crisp bends, and punch \u003cstrong\u003e6 round\u003c\/strong\u003e sizes, \u003cstrong\u003e5 square\u003c\/strong\u003e sizes, plus \u003cstrong\u003e1 rectangular\u003c\/strong\u003e shape—all on one compact, hand-operated machine built to professional standards.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShear, brake, and punch in one unit:\u003c\/strong\u003e Shearing, bending, and hole cutting for jewelry, prototypes, models, and small fabrications.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReversible HSS cutters:\u003c\/strong\u003e Precision-ground, hardened high-speed steel with \u003cstrong\u003efour cutting edges\u003c\/strong\u003e for extended service life.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCrisp, accurate bends:\u003c\/strong\u003e V-blocks and bending punches made of high-grade profiled steel.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSwiss made:\u003c\/strong\u003e Original Profiform build quality for accurate, repeatable results.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBroad material compatibility:\u003c\/strong\u003e Works with non-ferrous metals, aluminum, plastics, and a variety of thin materials.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMax Cut Width\u003c\/th\u003e\n\u003ctd\u003e200 mm (7-3\/4″)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMax Thickness — Non-ferrous (Au\/Ag\/Cu\/Br)\u003c\/th\u003e\n\u003ctd\u003e18 ga (≈ 1.0 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMax Thickness — Aluminum \/ Plastics\u003c\/th\u003e\n\u003ctd\u003e≈ 1.5 mm (0.059″)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCutters\u003c\/th\u003e\n\u003ctd\u003eReversible, precision-ground HSS — 4 cutting edges\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBending Tooling\u003c\/th\u003e\n\u003ctd\u003eV-blocks \u0026amp; punches in high-grade profiled steel\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePunch Shapes Included\u003c\/th\u003e\n\u003ctd\u003e6 round sizes, 5 square sizes, 1 rectangular\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTypical Materials\u003c\/th\u003e\n\u003ctd\u003eGold, silver, copper, brass; aluminum; plastics; paper; cardboard; PCB; veneer\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCountry of Origin\u003c\/th\u003e\n\u003ctd\u003eSwitzerland\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProfiform 200 basic unit\u003c\/strong\u003e — combination bench shear \u0026amp; bending brake\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHole punch attachment\u003c\/strong\u003e — required for all punching operations\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e13-piece punch set:\u003c\/strong\u003e 6 round sizes, 5 square sizes, and 1 rectangular cutter\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eThe \u003cstrong\u003ehole punch attachment\u003c\/strong\u003e must be installed when operating any of the included punches.\u003c\/li\u003e\n  \u003cli\u003eStay within stated thickness capacities for best edge quality and tool longevity.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Profiform","offers":[{"title":"Default Title","offer_id":43582788534486,"sku":"153.450","price":3286.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/profiform-200-basic-unit-plus-13-piece-hole-punch-kit-otto-frei.jpg?v=1719956855"},{"product_id":"eurotool-pro-shears-20-gauge-soft-metal-7-3-4in","title":"Eurotool Pro Shear-Cuts up to 20 Gauge Soft Metal","description":"\u003cp\u003eThe Eurotool Pro Shears are lightweight, easy to control, and reasonably priced tools designed for cutting soft metals in the studio or bench setting. Capable of slicing through copper, brass, and silver up to 20 gauge thick, these shears handle everyday sheet metal cutting tasks with precision and ease. Symmetrical large finger slots make them comfortable for both right-handed and left-handed users, though they are technically classified as a right-hand shear. At 7-3\/4\" overall length with 2\" blades, they offer excellent reach and control for clean, accurate cuts. Made in Taiwan.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCuts soft metals — copper, brass, and silver — up to 20 gauge thick\u003c\/li\u003e\n\u003cli\u003eLightweight construction for reduced hand fatigue during extended use\u003c\/li\u003e\n\u003cli\u003eSymmetrical large finger slots accommodate both right-handed and left-handed users\u003c\/li\u003e\n\u003cli\u003eClassified as a right-hand shear\u003c\/li\u003e\n\u003cli\u003e2\" blade length for precise, controlled cutting\u003c\/li\u003e\n\u003cli\u003e7-3\/4\" overall length for comfortable grip and reach\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall Length\u003c\/th\u003e\n\u003ctd\u003e7-3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlade Length\u003c\/th\u003e\n\u003ctd\u003e2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Cutting Capacity\u003c\/th\u003e\n\u003ctd\u003e20 gauge soft metal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Metals\u003c\/th\u003e\n\u003ctd\u003eCopper, brass, silver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHand Orientation\u003c\/th\u003e\n\u003ctd\u003eRight-hand shear (symmetrical handle)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCountry of Origin\u003c\/th\u003e\n\u003ctd\u003eTaiwan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Otto Frei","offers":[{"title":"Default Title","offer_id":43583768527062,"sku":"153.795","price":10.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/eurotool-pro-shear-cuts-up-to-20-gauge-soft-metal-otto-frei.jpg?v=1719956506"},{"product_id":"whaley-precision-bezel-cutting-90-degree-shears-eurotool","title":"Whaley Precision Bezel Cutting 90 Degree Shears","description":"\u003cp\u003eJay Whaley has done it again. These precision bezel cutting shears have been specially modified to deliver perfect 90-degree cuts on bezel material without fail—every time, even with heavier gauge bezel strips. Designed in collaboration with master jeweler Jay Whaley and produced by Eurotool, these shears bring a level of accuracy and consistency that standard solder shears simply cannot match.\u003c\/p\u003e\u003cp\u003eWhether you are working with fine bezel wire or heavier strip material, the precision-ground blades are engineered to produce clean, square cuts that seat perfectly for setting. The innovative 90-degree modification eliminates the guesswork and rework that plague standard shear cuts, making these an essential bench tool for jewelers and metalsmiths who demand exacting results.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModified solder shears designed specifically for cutting bezel material at a precise 90-degree angle\u003c\/li\u003e\n\u003cli\u003eHandles heavier gauge bezel strips with consistent, clean results\u003c\/li\u003e\n\u003cli\u003eEliminates angled or skewed cuts that can compromise bezel fit and solder seams\u003c\/li\u003e\n\u003cli\u003eDeveloped by master jeweler Jay Whaley in partnership with Eurotool\u003c\/li\u003e\n\u003cli\u003e7-inch overall length for comfortable leverage and control at the bench\u003c\/li\u003e\n\u003cli\u003eBlades measure 1-1\/2 inches in length\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall Length\u003c\/th\u003e\n\u003ctd\u003e7 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlade Length\u003c\/th\u003e\n\u003ctd\u003e1-1\/2 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut Angle\u003c\/th\u003e\n\u003ctd\u003e90 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eMade in Pakistan for Jay Whaley and Eurotool\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1 pair Whaley Precision Bezel Cutting 90 Degree Shears\u003c\/li\u003e\u003c\/ul\u003e","brand":"Eurotool","offers":[{"title":"Default Title","offer_id":43583916310742,"sku":"153.797","price":24.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/whaley-precision-bezel-cutting-90-degree-shears-otto-frei.jpg?v=1719956467"},{"product_id":"kent-raibles-chopper-granulation-shear","title":"Kent Raible's Chopper-Granulation Shear","description":"\u003cp\u003eDesigned by Kent Raible and made in the USA, the Chopper Granulation Shear is a precision tool engineered for rapid, high-volume production of the tiny wire snippets used in granulation work. While it resembles a simple shear at first glance, the Chopper incorporates sophisticated engineering that sets it apart from conventional cutting tools.\u003c\/p\u003e\u003cp\u003eThe key innovation is a spring-loaded stop side that moves down and out of the way as the shear is actuated—eliminating the reset delay that slows conventional shears. The result: you can cut snippets as small as 0.1 mm in length as fast as you can move the lever. Kent himself reports chopping at up to 8 cuts per second. For even faster production, the Chopper accepts a double load of 0.4 mm wire, yielding twice the snippets per stroke. Kent works primarily with 0.4 mm wire, cutting a variety of snippet lengths mostly under 1.0 mm.\u003c\/p\u003e\u003cp\u003eA built-in slide catches each snippet and directs it into an included container, keeping your precious metal cuts secure and organized at the bench.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSpring-loaded stop side enables continuous rapid cutting without manual reset\u003c\/li\u003e\n\u003cli\u003eCuts snippets as small as 0.1 mm in length\u003c\/li\u003e\n\u003cli\u003eDouble-load capacity with 0.4 mm wire for doubled output per stroke\u003c\/li\u003e\n\u003cli\u003eReported cutting speed of up to 8 strokes per second\u003c\/li\u003e\n\u003cli\u003eIntegrated snippet slide channels cuts directly into included collection container\u003c\/li\u003e\n\u003cli\u003eMaximum repeatable cut length of 10 mm using the built-in stop\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eDesigner\u003c\/th\u003e\n\u003ctd\u003eKent Raible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCountry of Origin\u003c\/th\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Wire Diameter\u003c\/th\u003e\n\u003ctd\u003e1.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum Snippet Length\u003c\/th\u003e\n\u003ctd\u003e0.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Repeatable Cut Length (using stop)\u003c\/th\u003e\n\u003ctd\u003e10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended Wire Diameter\u003c\/th\u003e\n\u003ctd\u003e0.4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eChopper Granulation Shear\u003c\/li\u003e\n\u003cli\u003eCollection container for wire snippets\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Otto Frei","offers":[{"title":"Default Title","offer_id":43584411042006,"sku":"153.926","price":475.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/kent-raible-s-chopper-granulation-shear-otto-frei-1.jpg?v=1719956211"},{"product_id":"durston-1206-4in-guillotine-shear","title":"Durston 1206 4\" Guillotine Shear","description":"\u003cp\u003e\u003cstrong\u003eDurston 1206 4\" Guillotine Shear\u003c\/strong\u003e is a compact, bench-mounted sheet-metal cutter built for precise, repeatable cuts in a professional jewelry or metalsmithing studio. It handles stock up to \u003cstrong\u003e110 mm (4-3\/8\") wide\u003c\/strong\u003e, cutting \u003cstrong\u003e2 mm (approx. 12 ga) non-ferrous metal\u003c\/strong\u003e and \u003cstrong\u003e1 mm (approx. 18 ga) mild steel\u003c\/strong\u003e with clean, controlled results. The updated design features a patent-pending stainless-steel table, an improved \u003cstrong\u003e6\" backstop\u003c\/strong\u003e, and a \u003cstrong\u003esquare-drive system\u003c\/strong\u003e that work together for consistent, accurate cuts every time. A built-in adjustable mitre gauge and integrated ruler enable straight and angled cuts up to \u003cstrong\u003e60° in 5° increments\u003c\/strong\u003e, making this shear equally capable for precise right-angle trimming and angled work.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting capacity:\u003c\/strong\u003e Up to 110 mm (4-3\/8\") wide; 2 mm (12 ga) non-ferrous or 1 mm (18 ga) mild steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-edge blade:\u003c\/strong\u003e Precision-ground, hardened and tempered blade with four usable cutting edges — rotate as needed for extended service life\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePatent-pending table:\u003c\/strong\u003e Stainless-steel work surface supports stock for clean, even shearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproved 6\" backstop:\u003c\/strong\u003e Paired with a square-drive system for repeatable, accurate positioning\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMitre gauge and ruler:\u003c\/strong\u003e Adjustable built-in mitre gauge for angled cuts from 0° to 60° in 5° increments\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand-bar operation:\u003c\/strong\u003e Provides controlled, steady cutting action at the bench\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBench-mountable:\u003c\/strong\u003e Designed to be secured to a work surface for maximum stability during use\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMade in the United Kingdom\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eDurston 1206\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax Cut Width\u003c\/th\u003e\n\u003ctd\u003e4-3\/8\" (110 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax Thickness – Non-Ferrous\u003c\/th\u003e\n\u003ctd\u003e2 mm (approx. 12 gauge)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax Thickness – Mild Steel\u003c\/th\u003e\n\u003ctd\u003e1 mm (approx. 18 gauge)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAngle Range\u003c\/th\u003e\n\u003ctd\u003e0°–60° in 5° increments\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (L × W × H)\u003c\/th\u003e\n\u003ctd\u003e8-5\/8\" × 6-3\/4\" × 5-1\/8\" (220 × 170 × 130 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNet Weight\u003c\/th\u003e\n\u003ctd\u003e18-1\/4 lb (8.3 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping Weight\u003c\/th\u003e\n\u003ctd\u003e22-1\/8 lb (10 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCountry of Origin\u003c\/th\u003e\n\u003ctd\u003eUnited Kingdom\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDurston 1206 4\" Guillotine Shear\u003c\/li\u003e\n\u003cli\u003eIntegrated stainless-steel table with ruler\u003c\/li\u003e\n\u003cli\u003eBuilt-in mitre gauge\u003c\/li\u003e\n\u003cli\u003eImproved 6\" backstop\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMount to a sturdy bench or stand for best stability and cutting performance\u003c\/li\u003e\n\u003cli\u003eRotate the blade to a fresh cutting edge as needed to maintain cut quality and extend blade life\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43584695566550,"sku":"153.894","price":1165.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-1206-4-guillotine-shear-otto-frei-1.jpg?v=1719956013"},{"product_id":"durston-1207-guillotine-shear-6-inch-160mm-1-5mm","title":"Durston 1207 6\" Guillotine Shear","description":"\u003cp\u003e\u003cstrong\u003eDurston 1207 6″ Guillotine Shear\u003c\/strong\u003e is the upgraded, UK-made bench shear featuring a larger stainless table, wider guide, improved backstop, and a patent-pending square rack-and-pinion drive for smoother cutting with less effort. It cleanly shears sheet up to \u003cstrong\u003e160 mm (6-1\/4″)\u003c\/strong\u003e wide by \u003cstrong\u003e1.5 mm\u003c\/strong\u003e non-ferrous and \u003cstrong\u003e0.75 mm\u003c\/strong\u003e mild steel, making precise straight or angled cuts fast and repeatable.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigher capacity:\u003c\/strong\u003e Cuts 160 mm (6-1\/4″) wide; up to 1.5 mm non-ferrous and 0.75 mm mild steel.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUpgraded work support:\u003c\/strong\u003e Larger stainless table and guide allow wider sheet to pass—even at 45°.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eImproved backstop:\u003c\/strong\u003e Smooth bearing guides with hand-tighten lock for quick, precise repeat cuts.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSquare drive system:\u003c\/strong\u003e Patent-pending rack \u0026amp; pinion transfers maximum torque directly to the blade.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrecision blade:\u003c\/strong\u003e Precision-ground, hardened \u0026amp; tempered; \u003cstrong\u003efour cutting edges\u003c\/strong\u003e for long service life.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAngle cutting:\u003c\/strong\u003e Built-in mitre gauge \u0026amp; ruler—angles to \u003cstrong\u003e60°\u003c\/strong\u003e in 5° increments.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBench-mount ready:\u003c\/strong\u003e Mounting holes for secure installation on a work surface (hardware not included).\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUK-made durability:\u003c\/strong\u003e Strong, rigid construction for jewelry-grade results.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eDurston 1207 (6″ Guillotine Shear)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMax Cut Width\u003c\/th\u003e\n\u003ctd\u003e6-1\/4″ (160 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMax Thickness – Non-Ferrous\u003c\/th\u003e\n\u003ctd\u003e1.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMax Thickness – Mild Steel\u003c\/th\u003e\n\u003ctd\u003e0.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAngle Range\u003c\/th\u003e\n\u003ctd\u003e0°–60° in 5° increments (mitre gauge)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDimensions (L × W × H)\u003c\/th\u003e\n\u003ctd\u003e10-5\/8″ × 8-3\/4″ × 7-3\/4″ (270 × 220 × 200 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNet Weight\u003c\/th\u003e\n\u003ctd\u003e37-1\/2 lb (17 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eShipping Weight\u003c\/th\u003e\n\u003ctd\u003e41.8 lb (19 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCountry of Origin\u003c\/th\u003e\n\u003ctd\u003eUnited Kingdom\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDurston 1207 6″ Guillotine Shear\u003c\/li\u003e\n  \u003cli\u003eIntegrated stainless table with ruler and adjustable mitre gauge\u003c\/li\u003e\n  \u003cli\u003eImproved backstop with bearing guides\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eRotate to a fresh blade edge when needed to maintain cut quality.\u003c\/li\u003e\n  \u003cli\u003eBench-mounting hardware is not included; mount securely to a sturdy bench for best results.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43584696123606,"sku":"153.896","price":1344.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-1207-6-guillotine-shear-otto-frei-1.jpg?v=1719956013"},{"product_id":"durston-solder-snips-straight-blades-160mm","title":"Durston Solder Snips Straight Blades","description":"\u003cp\u003eDurston Solder Snips with straight blades are precision shears designed for cutting small areas of fine sheet metal and pieces of solder. With a full length of 160mm (6-3\/8\"), these unsprung, straight-bladed snips deliver controlled, accurate cuts in tight areas where larger tools cannot reach. Suitable for cutting material up to 25 gauge (0.5mm), they are a reliable bench tool for jewelers and metalsmiths who work regularly with sheet and solder.\u003c\/p\u003e\u003cp\u003eThe ergonomic handles provide a comfortable grip, allowing you to work during longer sessions while reducing hand fatigue—an important consideration for repetitive cutting tasks at the jeweler's bench.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStraight blades designed for precise, controlled cuts\u003c\/li\u003e\n\u003cli\u003eUnsprung blade design for direct, hands-on control\u003c\/li\u003e\n\u003cli\u003eSuitable for cutting fine sheet metal and solder pieces up to 25 gauge (0.5mm)\u003c\/li\u003e\n\u003cli\u003eErgonomic handles reduce hand fatigue during extended use\u003c\/li\u003e\n\u003cli\u003eFull length of 160mm (6-3\/8\") for comfortable reach and leverage\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eFull Length\u003c\/th\u003e\n\u003ctd\u003e160mm (6-3\/8\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlade Type\u003c\/th\u003e\n\u003ctd\u003eStraight, unsprung\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Cutting Capacity\u003c\/th\u003e\n\u003ctd\u003e25 gauge (0.5mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuitable For\u003c\/th\u003e\n\u003ctd\u003eFine sheet metal, solder pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43584846135510,"sku":"153.770S","price":27.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-solder-snips-straight-blades-otto-frei-1.jpg?v=1719955878"},{"product_id":"durston-solder-snips-straight-blades-180mm","title":"Durston Solder Snips-Straight Blades","description":"\u003cp\u003eThese straight-bladed, unsprung solder snips from Durston are designed for precise cutting of small areas of fine sheet metal and solder pieces. With a full length of 180mm (7-1\/16\"), they offer ample reach for detailed bench work. Suitable for cutting material up to 25 gauge (0.5mm), these snips are a practical addition to any jeweler's or metalsmith's toolkit.\u003c\/p\u003e\u003cp\u003eThe ergonomic handles provide a comfortable grip, allowing you to work through longer sessions while reducing hand fatigue.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStraight blades for accurate, controlled cuts\u003c\/li\u003e\n\u003cli\u003eUnsprung design for straightforward handling\u003c\/li\u003e\n\u003cli\u003eSuitable for cutting fine sheet metal and solder pieces up to 25 gauge (0.5mm)\u003c\/li\u003e\n\u003cli\u003eErgonomic handles reduce hand fatigue during extended use\u003c\/li\u003e\n\u003cli\u003eFull length of 180mm (7-1\/16\") for comfortable bench use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eFull Length\u003c\/th\u003e\n\u003ctd\u003e180mm (7-1\/16\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Cutting Capacity\u003c\/th\u003e\n\u003ctd\u003e25 gauge (0.5mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlade Type\u003c\/th\u003e\n\u003ctd\u003eStraight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpring Mechanism\u003c\/th\u003e\n\u003ctd\u003eUnsprung\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43584846561494,"sku":"153.771","price":28.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-solder-snips-straight-blades-otto-frei.jpg?v=1719955878"},{"product_id":"durston-solder-snip-shears-curved-blade-180mm","title":"Durston Solder Ships Curved Blades","description":"\u003cp\u003e\u003cstrong\u003eDurston Curved Blade Solder Snip Shears\u003c\/strong\u003e deliver clean, precise cuts in thin non-ferrous metal sheet and solder pieces. With a full length of 180mm (7‑1\/16\"), these shears are engineered for jewelers and metalsmiths who need reliable cutting performance without sacrificing comfort during extended use.\u003c\/p\u003e\u003cp\u003eThe curved blade design allows for clean pattern cutting in sheet metal, making these snips equally useful for trimming solder as for shaping non-ferrous metal. Ergonomic handles provide a secure, comfortable grip that reduces hand fatigue during longer working sessions.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCurved blade design ideal for cutting clean patterns in thin sheet metal\u003c\/li\u003e\n\u003cli\u003eSuitable for cutting solder pieces with precision\u003c\/li\u003e\n\u003cli\u003eFull length of 180mm (7‑1\/16\")\u003c\/li\u003e\n\u003cli\u003eCuts non-ferrous metal up to 26 gauge (0.45mm)\u003c\/li\u003e\n\u003cli\u003eErgonomic handles reduce hand fatigue during extended use\u003c\/li\u003e\n\u003cli\u003eMade in Italy for Durston\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eFull Length\u003c\/th\u003e\n\u003ctd\u003e180mm (7‑1\/16\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Cutting Capacity\u003c\/th\u003e\n\u003ctd\u003e26 gauge \/ 0.45mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Materials\u003c\/th\u003e\n\u003ctd\u003eNon-ferrous metals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlade Style\u003c\/th\u003e\n\u003ctd\u003eCurved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eMade in Italy for Durston\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43584846725334,"sku":"153.773","price":28.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-solder-ships-curved-blades-otto-frei.jpg?v=1719955878"},{"product_id":"durston-scissor-handle-solder-snips-straight-blades-180mm","title":"Durston Scissor Handle Solder Snips Straight Blades","description":"\u003cp\u003eThe Durston Scissor Handle Solder Snips with Straight Blades are a precision cutting tool designed for jewelers and metalsmiths who demand control and reliability in fine detail work. At 180mm (7-1\/16\") in overall length, these snips are sized for comfortable, extended use during intricate tasks such as trimming fine wires, cutting solder pieces, and working with fine gauges of non-ferrous sheet metals.\u003c\/p\u003e\n\u003cp\u003eConstructed with a familiar scissor-style handle, these snips offer the ergonomic feel of scissors combined with the sturdy construction required for cutting sheet metal. The blades are made from a hard, strong material engineered to resist nicking and deformation under normal use—maintaining their edge and form over time. Suitable for cutting non-ferrous sheet metal up to 26 gauge (0.45mm).\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eScissor-style handle for familiar, comfortable grip and precise control\u003c\/li\u003e\n\u003cli\u003eStraight blades ideal for clean, accurate cuts\u003c\/li\u003e\n\u003cli\u003e180mm (7-1\/16\") overall length suited to detailed bench work\u003c\/li\u003e\n\u003cli\u003eHard, strong blade construction resists nicking and deformation with normal use\u003c\/li\u003e\n\u003cli\u003eSuitable for cutting non-ferrous sheet metal up to 26 gauge (0.45mm)\u003c\/li\u003e\n\u003cli\u003eWell-suited for trimming fine wires, solder pieces, and thin sheet materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall Length\u003c\/th\u003e\n\u003ctd\u003e180mm (7-1\/16\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Cutting Capacity\u003c\/th\u003e\n\u003ctd\u003e26 gauge \/ 0.45mm non-ferrous sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlade Style\u003c\/th\u003e\n\u003ctd\u003eStraight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHandle Style\u003c\/th\u003e\n\u003ctd\u003eScissor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuitable Materials\u003c\/th\u003e\n\u003ctd\u003eNon-ferrous metals (fine wire, solder, sheet)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43584847380694,"sku":"153.775","price":28.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-scissor-handle-solder-snips-straight-blades-otto-frei-1.jpg?v=1719955878"},{"product_id":"durston-1208-12in-guillotine-shear","title":"Durston 1208 New Version 12\" Guillotine Shear","description":"\u003cp\u003eThis updated 12\" guillotine shear is sized for jewelry and small metalsmithing sheet work, combining a solid bench presence with a smoother, lighter feel than earlier heavy-duty models. As you pull the handle through a cut, the blade tracks down in a precise, controlled arc for clean, straight shears.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eNew-generation 12\" bench shear design patterned after Durston’s 4\" and 6\" guillotine shears for a lighter, more compact footprint.\u003c\/li\u003e\n  \u003cli\u003eStainless steel worktable supports sheet as it feeds into the cutting area for even, controlled cuts.\u003c\/li\u003e\n  \u003cli\u003eIntegrated adjustable mitre gauge and ruler for repeatable straight and angled cuts.\u003c\/li\u003e\n  \u003cli\u003eHand lever operates a precision ground, hardened and tempered blade for a crisp shearing action.\u003c\/li\u003e\n  \u003cli\u003eRemovable handle extension included to increase leverage when extra force is required.\u003c\/li\u003e\n  \u003cli\u003eFour-edge blade can be rotated as edges wear to extend service life.\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty construction built to be bench mounted for stable use in the workshop.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n    \u003cth\u003eDetail\u003c\/th\u003e\n    \u003cth\u003eValue\u003c\/th\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eMaximum Cutting Width\u003c\/td\u003e\n    \u003ctd\u003e12\" (300 mm)\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eMaximum Non-Ferrous Sheet Thickness\u003c\/td\u003e\n    \u003ctd\u003e2 mm (approx. 12 gauge)\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eMaximum Mild Steel Thickness\u003c\/td\u003e\n    \u003ctd\u003e1 mm (approx. 18 gauge)\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eBlade Type\u003c\/td\u003e\n    \u003ctd\u003ePrecision ground, hardened and tempered blade with 4 usable cutting edges\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eCutting Angle Range\u003c\/td\u003e\n    \u003ctd\u003eUp to 60° in 5° increments (with built-in mitre gauge)\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eTable Material\u003c\/td\u003e\n    \u003ctd\u003eStainless steel\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eOperation\u003c\/td\u003e\n    \u003ctd\u003eManual lever with optional extension handle\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eMounting\u003c\/td\u003e\n    \u003ctd\u003eBench mount (mounting hardware not included)\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eLength\u003c\/td\u003e\n    \u003ctd\u003e16\" (400 mm)\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eWidth\u003c\/td\u003e\n    \u003ctd\u003e14-1\/2\" (370 mm)\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eHeight\u003c\/td\u003e\n    \u003ctd\u003e10-5\/8\" (270 mm)\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eWeight\u003c\/td\u003e\n    \u003ctd\u003e130 lb (59 kg)\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eManufactured In\u003c\/td\u003e\n    \u003ctd\u003eUnited Kingdom\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eBrand\u003c\/td\u003e\n    \u003ctd\u003eDurston\u003c\/td\u003e\n  \u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eThis newer 12\" guillotine shear is lighter than Durston’s original heavy-duty model while retaining a robust frame and four-edge blade design. It is ideal for cutting non-ferrous sheet such as copper, brass, silver, and gold up to its rated capacity, as well as light-gauge mild steel.\u003c\/p\u003e\n\u003cp\u003eFor best results, mount the shear securely to a solid work surface and rotate or replace the blade edges as needed to maintain clean cuts.\u003c\/p\u003e\n","brand":"Durston","offers":[{"title":"Default Title","offer_id":44301107724502,"sku":"153.8912","price":1628.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-1208-new-version-12-guillotine-shear-otto-frei-1.jpg?v=1719954167"},{"product_id":"chikamasa-japanese-scissors-beading-thread-5in","title":"Chikamasa Japanese Scissors","description":"\u003cp\u003eChikamasa Japanese Scissors are professional-grade cutting tools designed specifically for jewelers and beading specialists who work with high-performance metal beading threads. Built to handle super-hard materials such as WildFire and FireLine, these scissors deliver the strength and hardness required to cut cleanly through threads that would dull or damage ordinary scissors. Developed with direct input from Japanese beading experts, they offer superior quality suited to a wide variety of precision cutting tasks.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEngineered for cutting hard-to-cut metal beading threads including WildFire and FireLine\u003c\/li\u003e\n\u003cli\u003eExceptional hardness and cutting strength to withstand repeated use on super-hard materials\u003c\/li\u003e\n\u003cli\u003eDeveloped with input from Japanese beading experts for professional-level performance\u003c\/li\u003e\n\u003cli\u003eVersatile design suitable for a wide range of precision cutting tasks\u003c\/li\u003e\n\u003cli\u003eMade in Japan\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e5 in (130 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.07 lbs (30 g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eMade in Japan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Made in Japan","offers":[{"title":"Default Title","offer_id":44381332078806,"sku":"153.813","price":28.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/chikamasa-japanese-scissors-otto-frei.jpg?v=1708017419"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/collections\/durston-1208-new-version-12-guillotine-shear-otto-frei-3.jpg?v=1758921070","url":"https:\/\/www.ottofrei.com\/collections\/jewelry-shears-metalsmithing.oembed?page=2","provider":"Otto Frei","version":"1.0","type":"link"}