Jura Artgraver Pro-Combo Micromotor & Engraving-Stonesetting System with Hot Air-Cool Air Guns

This is the JURA Artgraver Pro the combination micromotor and engraving-stonesetting system in one box-with the added Hot Air and Cool Air hookups and guns*. 


Jura had hand built every Artgraver Pro unit. If you were lucky enough to had purchased one of Jura's machines, and you have a question or you need service, please contact Jura on Facebook or Instagram for a consultation.

Now you can combine these two important pieces of equipment in one small footprint box. No air compressor required is just an added bonus for this precision made all in one stonesetters and engravers tool.

Micromotor:
The new JURA Micromotor uses a high torque Saeshin brushless micro motor combined with a slim NSK E Type handpiece. This combination produces the necessary low speed torque that is required for precise drilling in hard metals like platinum and 18K white gold for precision pave micro stonesetting. The NSK handpiece is slim like a pen, allowing for stress free work all day.

The torque produced is rated at 7.8Ncm. What does that mean? That torque number means you get consistent low speed drilling at your chosen speed. The motor doesn't "bog down" and you are not constantly manipulating the foot control to maintain speed.

It is exactly what you need for all types of stone setting application. The precise application of speed and torque for drilling in hard metals at low speed.

Although the Shashien brushless motor and the control box will allow speeds up to 40,000 rpm, the handpiece is rated for 20,000 rpm. Caution must be taken to not exceed the maximum rpm for the handpiece. The handpiece disconnects from the micromotor by a quick pull. They do not screw together, they are a friction fit.

The JURA micromotor has a digital readout that shows rpm speed by the 1000 rpm. It also has a digital display for elapsed time that is used in factory production work or whenever you need to know how much time was involved in a particular task. The speed is controlled by a large dial in the center of the control box. The three control box functions are on/off, hand speed control by dial/foot speed control by foot control and Forward/Reverse.

What makes the JURA Artgraver special beyond the air compressor free feature? It's the handpiece. The single handpiece can be quickly modified by switching out the weights to allow for a wide variety of engraving styles from light bulino work to heavy engraving in hard metals like steel and titanium.

With this machine you can hand engrave and set stones. It is the perfect machine for hand engraving and stone setting of all kinds. It is the type of hand engraving and stonesetting machine that JURA uses, and now it is available to all.

Artgraver Engraving-Stonesetting System

The new JURA by GRS Artgraver stonesetting and engraving system does not require an air compressor. No more hook ups or compressor expenses as this space saving stone setting and engraving system just plugs in and goes.

What makes the JURA Artgraver special beyond the air compressor free feature? It's the handpiece. The single handpiece can be quickly modified by switching out the weights to allow for a wide variety of engraving styles from light bulino work to heavy engraving in hard metals like steel and titanium.

With this machine you can hand engrave and set stones. It is the perfect machine for hand engraving and stone setting of all kinds. It is the type of hand engraving and stonesetting machine that JURA uses, and now it is available to all.

*Air compressor required to operate the Hot Air and Cool Air guns.

Product Note:
There are 2 identical looking foot controls supplied with the Artgraver Plus. The foot control cable marked red goes to the graver foot control. The unmarked foot control is for the micromotor.
Control box dimension: 5"wide x 7-1/2"tall x 10" deep