{"title":"Silver Solders","description":"","products":[{"product_id":"silver-wire-solder-kit","title":"Silver Wire Solder Kit","description":"\u003cp\u003eThe Silver Wire Solder Kit offers a practical sampling of three flowing silver wire solders — Easy, Medium, and Hard — in a single package. Each length of wire weighs approximately 1.66 pennyweights, for a combined total of approximately 5 dwt (1\/4 troy ounce). This kit is well suited for jewelers who want to keep all three flow grades on hand for a range of fabrication and repair applications.\u003c\/p\u003e\n\n\u003cp\u003eThe terms \u003cstrong\u003eExtra Easy, Easy, Medium,\u003c\/strong\u003e and \u003cstrong\u003eHard\u003c\/strong\u003e describe the \u003cem\u003erelative temperature flow points\u003c\/em\u003e between solders of one type or brand. Extra Easy has the lowest flow point, followed by Easy, then Medium, then Hard. This labeling system generally holds true across silver solder brands, though differences between manufacturers do exist — one maker's Medium may flow at the same temperature as another maker's Hard.\u003c\/p\u003e\n\n\u003cp\u003eGenerally, the higher the flow point temperature, the higher the silver content of the solder. Higher silver content improves color match to silver and theoretically produces a stronger bond.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhich grade should you use?\u003c\/strong\u003e When manufacturing, start with the highest-temperature (Hard) solder so that subsequent repairs can be made with lower-temperature grades. When doing repairs, use the lowest-temperature (Extra Easy or Easy) solder available, since the solder previously used is unknown.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes Easy, Medium, and Hard silver wire solder grades in one kit\u003c\/li\u003e\n\u003cli\u003eEach wire length weighs approximately 1.66 pennyweights\u003c\/li\u003e\n\u003cli\u003eTotal kit weight approximately 5 dwt (1\/4 troy ounce)\u003c\/li\u003e\n\u003cli\u003eGraduated flow points support multi-stage fabrication and repair workflows\u003c\/li\u003e\n\u003cli\u003eHigher flow point grades offer higher silver content and improved color match to silver\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eKit Contents\u003c\/th\u003e\n\u003ctd\u003eEasy, Medium, and Hard silver wire solder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight per Wire\u003c\/th\u003e\n\u003ctd\u003eApproximately 1.66 dwt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTotal Kit Weight\u003c\/th\u003e\n\u003ctd\u003eApproximately 5 dwt (1\/4 troy ounce)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEasy Flow Point\u003c\/th\u003e\n\u003ctd\u003e1325°F (719°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMedium Flow Point\u003c\/th\u003e\n\u003ctd\u003e1390°F (755°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHard Flow Point\u003c\/th\u003e\n\u003ctd\u003e1475°F (802°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSolder Form\u003c\/th\u003e\n\u003ctd\u003eWire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 length Easy silver wire solder (Part 804-401) — 1325°F (719°C) flow point\u003c\/li\u003e\n\u003cli\u003e1 length Medium silver wire solder (Part 804-402) — 1390°F (755°C) flow point\u003c\/li\u003e\n\u003cli\u003e1 length Hard silver wire solder (Part 804-403) — 1475°F (802°C) flow point\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Otto Frei","offers":[{"title":"Default Title","offer_id":43581631987926,"sku":"804-444","price":33.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/silver-wire-solder-kit-otto-frei.jpg?v=1719957481"},{"product_id":"silver-solder-sheet-kit","title":"Silver Solder Sheet Kit","description":"\u003cp\u003eThe Silver Solder Sheet Kit from Harmony is a practical starter and reference set for jewelers and metalsmiths working with silver. The kit contains one small sheet each of three cadmium-free silver solders spanning a range of flow points, giving you the flexibility to tackle new fabrication work and repairs with the appropriate solder grade.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes three cadmium-free silver solder sheets covering soft, medium, and medium-hard flow points\u003c\/li\u003e\n  \u003cli\u003eTotal weight of approximately 15 pennyweights across all three sheets\u003c\/li\u003e\n  \u003cli\u003eSheet format for easy cutting and portioning at the bench\u003c\/li\u003e\n  \u003cli\u003eCadmium-free formulation for safer studio use\u003c\/li\u003e\n  \u003cli\u003eSpans a practical temperature range from 1260°F to 1375°F flow point\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eTotal Weight\u003c\/th\u003e\n\u003ctd\u003eApproximately 15 pennyweights (combined)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCadmium Free\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eForm\u003c\/th\u003e\n\u003ctd\u003eSheet\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSheets Included\u003c\/th\u003e\n\u003ctd\u003e3 (one each of Soft, Medium, Medium-Hard)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eHarmony\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e804-405 – Soft\u003c\/strong\u003e, Flow Point 1260°F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e804-406 – Medium\u003c\/strong\u003e, Flow Point 1295°F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e804-407 – Medium-Hard\u003c\/strong\u003e, Flow Point 1375°F\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eSilver solder grades — \u003cstrong\u003eExtra Soft, Soft, Medium, Medium-Hard\u003c\/strong\u003e, and \u003cstrong\u003eHard\u003c\/strong\u003e — describe the \u003cem\u003erelative temperature flow points\u003c\/em\u003e within a solder line. Extra Soft (also called Extra Easy) flows at the lowest temperature, with each successive grade flowing at a progressively higher temperature. Generally, a higher flow point corresponds to a higher silver content, which improves color match to silver and can contribute to a stronger bond.\u003c\/p\u003e\n\u003cp\u003eKeep in mind that flow point temperatures vary between manufacturers. One maker's Medium may flow at the same temperature as another maker's Hard, so always verify flow points when mixing solder brands.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor fabrication:\u003c\/strong\u003e Use the highest-temperature (hardest) solder available so that subsequent repairs can be made with lower-temperature solders without disturbing existing seams. \u003cstrong\u003eFor repairs:\u003c\/strong\u003e Use the lowest-temperature (softest) solder appropriate for the job, since the solder grade used previously is often unknown.\u003c\/p\u003e","brand":"Harmony","offers":[{"title":"Default Title","offer_id":43581633495254,"sku":"804-415","price":121.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/silver-solder-sheet-kit-otto-frei.jpg?v=1719957481"},{"product_id":"silver-sheet-solder-eutectic-zinc-free-enameling","title":"Silver Sheet Solder Eutectic Zinc-Free for Enameling","description":"\u003cp\u003eThis zinc-free eutectic silver solder — commonly known as \u003cstrong\u003eIT solder\u003c\/strong\u003e — is specifically formulated for enameling applications. Each piece weighs approximately 5 pennyweights (5 DWT, or 1\/4 troy ounce) and contains \u003cstrong\u003e80% silver and 20% copper\u003c\/strong\u003e, with no zinc in the alloy.\u003c\/p\u003e\n\u003cp\u003eBecause zinc can cause bubbling and surface defects when solder comes into contact with enamel during firing, eutectic silver solders are the professional standard for enameled metalwork. The eutectic composition — silver and copper only — eliminates that risk, making this solder the reliable choice wherever enamel and solder may interact. The approximate flow point is \u003cstrong\u003e1560°F (848°C)\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eZinc-free eutectic alloy — safe for use in enameling applications\u003c\/li\u003e\n\u003cli\u003eContains 80% silver and 20% copper only\u003c\/li\u003e\n\u003cli\u003ePrevents bubbling when solder contacts enamel during firing\u003c\/li\u003e\n\u003cli\u003eAlso known as IT solder in the trade\u003c\/li\u003e\n\u003cli\u003eApproximate flow point: 1560°F (848°C)\u003c\/li\u003e\n\u003cli\u003eSold as a single piece weighing approximately 5 DWT (1\/4 troy ounce)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eAlloy Composition\u003c\/th\u003e\n\u003ctd\u003e80% silver, 20% copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eZinc Content\u003c\/th\u003e\n\u003ctd\u003eZinc-free\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSolder Type\u003c\/th\u003e\n\u003ctd\u003eEutectic (IT solder)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlow Point (Approx.)\u003c\/th\u003e\n\u003ctd\u003e1560°F (848°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003eApproximately 3-1\/2\" L x 1-1\/4\" W \u003cem\u003e(Please note dimensions will vary.)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003eApproximately 0.24mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eApproximately 5 DWT (1\/4 troy ounce)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQuantity\u003c\/th\u003e\n\u003ctd\u003e1 piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Otto Frei","offers":[{"title":"Default Title","offer_id":43581741334742,"sku":"804-409","price":42.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/silver-sheet-solder-eutectic-zinc-free-for-enameling-otto-frei.jpg?v=1719957418"},{"product_id":"easy-clipped-silver-solder-half-oz-packs","title":"Easy Clipped Silver Solder-1\/2 Oz. Packs","description":"\u003cp\u003eSave time at the bench with pre-cut easy flow silver solder, sold in packs weighing approximately 1\/2 Troy Ounce (10 DWT). Each piece is pre-clipped to a precise 0.040\" × 0.040\" (1 mm × 1 mm) square, so you can go straight to work without the extra step of cutting solder strip yourself.\u003c\/p\u003e\n\n\u003cp\u003eEasy flow silver solder is ideal for joining silver components that require a lower flow temperature, making it the right choice for assemblies where higher-temperature solders might damage previously soldered joints or heat-sensitive elements.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePre-clipped into uniform 0.040\" × 0.040\" (1 mm × 1 mm) square pieces — no cutting required\u003c\/li\u003e\n\u003cli\u003eEasy flow formula with a flow temperature of approximately 1325°F\u003c\/li\u003e\n\u003cli\u003e65% silver content\u003c\/li\u003e\n\u003cli\u003eSold in packs of approximately 1\/2 Troy Ounce (10 DWT)\u003c\/li\u003e\n\u003cli\u003eConsistent piece size supports accurate solder placement and reduces waste\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eFlow Type\u003c\/th\u003e\n\u003ctd\u003eEasy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlow Temperature\u003c\/th\u003e\n\u003ctd\u003eApproximately 1325°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSilver Content\u003c\/th\u003e\n\u003ctd\u003e65%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePiece Size\u003c\/th\u003e\n\u003ctd\u003e0.040\" × 0.040\" (1 mm × 1 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack Weight\u003c\/th\u003e\n\u003ctd\u003eApproximately 1\/2 Troy Ounce (10 DWT)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eForm\u003c\/th\u003e\n\u003ctd\u003ePre-clipped squares\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eMedium and hard flow silver solders are also available — see additional listings for other flow grades.\u003c\/p\u003e","brand":"Otto Frei","offers":[{"title":"Default Title","offer_id":43583680708822,"sku":"804-565","price":59.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/easy-clipped-silver-solder-12-oz-packs-otto-frei.jpg?v=1719956550"},{"product_id":"hard-clipped-silver-solder-half-oz-packs","title":"Hard Clipped Silver Solder - 1\/2 Oz Packs","description":"\u003cp\u003ePre-cut hard flow silver solder in convenient 1\/2 Troy Ounce (10 DWT) packs. Each piece is pre-cut to \u003cstrong\u003e.040\" × .040\" (1 mm × 1 mm)\u003c\/strong\u003e square, eliminating the time-consuming step of cutting solder yourself at the bench. Hard silver solder flows at approximately \u003cstrong\u003e1450°F\u003c\/strong\u003e, making it ideal for early-stage joins in multi-step soldering sequences where subsequent solder operations will use lower-flow grades.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePre-cut to .040\" × .040\" (1 mm × 1 mm) square pieces — no bench cutting required\u003c\/li\u003e\n\u003cli\u003eHard flow grade — flows at approximately 1450°F\u003c\/li\u003e\n\u003cli\u003e75% silver content\u003c\/li\u003e\n\u003cli\u003eSold in packs weighing approximately 1\/2 Troy Ounce (10 DWT)\u003c\/li\u003e\n\u003cli\u003eSaves time and reduces material waste compared to cutting strip solder\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSolder Grade\u003c\/th\u003e\n\u003ctd\u003eHard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlow Temperature\u003c\/th\u003e\n\u003ctd\u003eApproximately 1450°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSilver Content\u003c\/th\u003e\n\u003ctd\u003e75%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePiece Dimensions\u003c\/th\u003e\n\u003ctd\u003e.040\" × .040\" (1 mm × 1 mm) square\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack Weight\u003c\/th\u003e\n\u003ctd\u003eApproximately 1\/2 Troy Ounce (10 DWT)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Otto Frei","offers":[{"title":"Default Title","offer_id":43584541327574,"sku":"804-567","price":68.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/hard-clipped-silver-solder-12-oz-packs-otto-frei.jpg?v=1719956108"},{"product_id":"medium-clipped-silver-solder-half-oz-packs","title":"Medium Clipped Silver Solder - 1\/2 Oz Packs","description":"\u003cp\u003eSave time at the bench with pre-cut medium silver solder, sold in convenient packs weighing approximately 1\/2 Troy Ounce (10 DWT). Each piece is cut to a precise \u003cstrong\u003e.040\" × .040\" (1 mm × 1 mm)\u003c\/strong\u003e square, so there is no measuring or cutting required before you solder. Medium silver solder flows at approximately \u003cstrong\u003e1360°F\u003c\/strong\u003e, making it well suited for work that requires a mid-range flow temperature—ideal when an easy solder would be too low and hard solder is unnecessary.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePre-cut to .040\" × .040\" (1 mm × 1 mm) square pieces—no cutting required\u003c\/li\u003e\n\u003cli\u003eMedium flow temperature of approximately 1360°F\u003c\/li\u003e\n\u003cli\u003e70% silver content\u003c\/li\u003e\n\u003cli\u003eSold in packs of approximately 1\/2 Troy Ounce (10 DWT)\u003c\/li\u003e\n\u003cli\u003eConsistent piece size reduces waste and speeds workflow\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePack Weight\u003c\/th\u003e\n\u003ctd\u003eApproximately 1\/2 Troy Ounce (10 DWT)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePiece Dimensions\u003c\/th\u003e\n\u003ctd\u003e.040\" × .040\" (1 mm × 1 mm) square\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlow Temperature\u003c\/th\u003e\n\u003ctd\u003eApproximately 1360°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSilver Content\u003c\/th\u003e\n\u003ctd\u003e70%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSolder Grade\u003c\/th\u003e\n\u003ctd\u003eMedium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Otto Frei","offers":[{"title":"Default Title","offer_id":43586860286166,"sku":"804-566","price":63.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/medium-clipped-silver-solder-12-oz-packs-otto-frei.jpg?v=1719955756"},{"product_id":"silver-wire-solder-extra-easy-easy-medium-hard-quarter-oz-coils","title":"Silver Wire Solders-Extra Easy, Easy, Med \u0026 Hard-1\/4 Oz. Coils","description":"\u003cp\u003eChoose from 4 different temperature flow points of silver wire solder, ideal for hard (torch) soldering — also known as brazing — on silver jewelry and metalwork. Each coil weighs approximately 1\/4 ounce (5 DWT), measures approximately 4-1\/2 feet in length, and is formed from round wire with a diameter of 0.032\" (0.8mm), equivalent to 20 gauge. Coils are sold individually.\u003c\/p\u003e\u003cp\u003eThe designations \u003cstrong\u003eExtra Easy\u003c\/strong\u003e, \u003cstrong\u003eEasy\u003c\/strong\u003e, \u003cstrong\u003eMedium\u003c\/strong\u003e, and \u003cstrong\u003eHard\u003c\/strong\u003e describe the relative temperature flow points within this solder family. Extra Easy flows at the lowest temperature, progressing upward through Easy and Medium to Hard at the highest. Generally, higher flow point temperatures correspond to higher silver content, which can improve color match to silver and theoretically produce a stronger bond. Note that flow point designations are relative within a brand—one maker's Medium may flow at the same temperature as another maker's Hard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich grade should you use?\u003c\/strong\u003e When manufacturing, use the highest temperature (Hard) solder available so that subsequent repairs can be made with lower-temperature solders. When making repairs, use the lowest temperature (Extra Easy) solder possible, since the grade used previously is typically unknown.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAvailable in four flow point grades: Extra Easy, Easy, Medium, and Hard\u003c\/li\u003e\n\u003cli\u003eRound wire form — 0.032\" (0.8mm) diameter, 20 gauge\u003c\/li\u003e\n\u003cli\u003eEach coil approximately 1\/4 oz (5 DWT) and 4-1\/2 feet long\u003c\/li\u003e\n\u003cli\u003eFor use with hard (torch) soldering \/ brazing only\u003c\/li\u003e\n\u003cli\u003eHigher silver content grades offer closer color match to silver\u003c\/li\u003e\n\u003cli\u003eGraduated flow points allow sequential soldering of multiple joints\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eWire Diameter\u003c\/th\u003e\n\u003ctd\u003e0.032\" (0.8mm), 20 gauge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWire Form\u003c\/th\u003e\n\u003ctd\u003eRound wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoil Weight\u003c\/th\u003e\n\u003ctd\u003eApproximately 1\/4 oz (5 DWT)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoil Length\u003c\/th\u003e\n\u003ctd\u003eApproximately 4-1\/2 feet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSoldering Method\u003c\/th\u003e\n\u003ctd\u003eHard (torch) soldering \/ brazing only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold As\u003c\/th\u003e\n\u003ctd\u003eIndividual coils\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eAvailable Options\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eGrade\u003c\/th\u003e\n\u003cth\u003eFlow Point\u003c\/th\u003e\n\u003cth\u003eSilver Content\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e804-400\u003c\/td\u003e\n\u003ctd\u003eExtra Easy\u003c\/td\u003e\n\u003ctd\u003e1300°F \/ 705°C\u003c\/td\u003e\n\u003ctd\u003e56% Silver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e804-401\u003c\/td\u003e\n\u003ctd\u003eEasy\u003c\/td\u003e\n\u003ctd\u003e1325°F \/ 719°C\u003c\/td\u003e\n\u003ctd\u003e65% Silver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e804-402\u003c\/td\u003e\n\u003ctd\u003eMedium\u003c\/td\u003e\n\u003ctd\u003e1390°F \/ 755°C\u003c\/td\u003e\n\u003ctd\u003e70% Silver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e804-403\u003c\/td\u003e\n\u003ctd\u003eHard\u003c\/td\u003e\n\u003ctd\u003e1475°F \/ 802°C\u003c\/td\u003e\n\u003ctd\u003e75% Silver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Otto Frei","offers":[{"title":"Extra Easy","offer_id":43587031990486,"sku":"804-400","price":29.8,"currency_code":"USD","in_stock":false},{"title":"Easy","offer_id":47562358915286,"sku":"804-401","price":29.88,"currency_code":"USD","in_stock":true},{"title":"Medium","offer_id":47561579921622,"sku":"804-402","price":31.96,"currency_code":"USD","in_stock":true},{"title":"Hard","offer_id":47557498863830,"sku":"804-403","price":34.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/silver-wire-solders-extra-easy-easy-med-and-hard-14-oz-coils-otto-frei.jpg?v=1719955722"},{"product_id":"silver-sheet-solder-extra-soft-soft-medium-medium-hard-hard-quarter-oz","title":"Silver Sheet Solders-Extra Soft, Soft, Med, Med Hard \u0026 Hard-1\/4 Oz. Sheets","description":"\u003cp\u003eSilver sheet solder for hard (torch) soldering and brazing of silver jewelry and metalwork. Each sheet weighs approximately 5 pennyweights (1\/4 troy ounce \/ 7.7 grams) and measures approximately 40 mm × 60 mm with a thickness of 0.30–0.33 mm. Choose from five flow points — Extra-Soft through Hard — to match the demands of new fabrication, repair work, or specialty applications such as enameling.\u003c\/p\u003e\n\n\u003cp\u003eThe grade names Extra-Soft, Soft, Medium, Medium-Hard, and Hard describe relative flow temperatures within this solder line. Each successive grade flows at a higher temperature, which generally produces a stronger bond. Note that flow point designations can vary between manufacturers; one maker's Medium may flow near another maker's Hard.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eExtra-Soft\u003c\/strong\u003e solder (also called Extra-Easy) produces a pale yellow appearance and leaves a visible seam on silver. It is recommended for eyeglass repair and applications requiring the lowest flow point. \u003cem\u003eExtra-Soft is the only grade in this line that contains cadmium.\u003c\/em\u003e All other grades are cadmium-free.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSoft\u003c\/strong\u003e solder is also referred to as Easy solder.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHard (IT) solder\u003c\/strong\u003e flows at 1490°F (810°C), above typical enameling firing temperatures, making it suitable for soldering findings onto pieces prior to enameling. Ensure this solder does not contact enamel directly — zinc-bearing solders can cause enamel to bubble if contact occurs.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eChoosing a grade:\u003c\/strong\u003e When manufacturing, use the hardest (highest flow point) solder you can so future repairs can be made with lower-temperature solders. When repairing, use the softest grade possible, since the solder previously used is unknown.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFive flow point grades available: Extra-Soft, Soft, Medium, Medium-Hard, and Hard\u003c\/li\u003e\n\u003cli\u003eSheet form for easy cutting and sizing to fit any seam\u003c\/li\u003e\n\u003cli\u003eEach sheet weighs approximately 5 DWT (1\/4 troy ounce \/ 7.7 grams)\u003c\/li\u003e\n\u003cli\u003eFor hard (torch) soldering and brazing only — not for soft soldering\u003c\/li\u003e\n\u003cli\u003eHard grade functions as IT solder for pre-enameling applications\u003c\/li\u003e\n\u003cli\u003eAll grades except Extra-Soft are cadmium-free\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eForm\u003c\/th\u003e\n\u003ctd\u003eSheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheet Weight\u003c\/th\u003e\n\u003ctd\u003eApproximately 5 DWT (1\/4 troy ounce \/ 7.7 grams)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheet Dimensions\u003c\/th\u003e\n\u003ctd\u003eApproximately 40 mm × 60 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheet Thickness\u003c\/th\u003e\n\u003ctd\u003e0.30–0.33 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQuantity\u003c\/th\u003e\n\u003ctd\u003e1 sheet per order\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003ctd\u003eHard (torch) soldering \/ brazing only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eAvailable Options\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eGrade\u003c\/th\u003e\n\u003cth\u003eFlow Point\u003c\/th\u003e\n\u003cth\u003eSilver Content\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e804-404\u003c\/td\u003e\n\u003ctd\u003eExtra-Soft (Extra-Easy) ⚠ Contains Cadmium\u003c\/td\u003e\n\u003ctd\u003e1190°F \/ 644°C\u003c\/td\u003e\n\u003ctd\u003e30%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e804-405\u003c\/td\u003e\n\u003ctd\u003eSoft (Easy)\u003c\/td\u003e\n\u003ctd\u003e1260°F \/ 682°C\u003c\/td\u003e\n\u003ctd\u003e45%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e804-406\u003c\/td\u003e\n\u003ctd\u003eMedium\u003c\/td\u003e\n\u003ctd\u003e1295°F \/ 702°C\u003c\/td\u003e\n\u003ctd\u003e65%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e804-407\u003c\/td\u003e\n\u003ctd\u003eMedium-Hard\u003c\/td\u003e\n\u003ctd\u003e1375°F \/ 746°C\u003c\/td\u003e\n\u003ctd\u003e75%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e804-408\u003c\/td\u003e\n\u003ctd\u003eHard (IT Solder)\u003c\/td\u003e\n\u003ctd\u003e1490°F \/ 810°C\u003c\/td\u003e\n\u003ctd\u003e80% Silver \/ 20% Copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtra-Soft (804-404) contains cadmium.\u003c\/strong\u003e All other grades are cadmium-free.\u003c\/li\u003e\n\u003cli\u003eWARNING: Part #804-404 can expose you to cadmium, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.\u003c\/li\u003e\n\u003cli\u003eHard (IT) solder must not come into contact with enamel during the enameling process — zinc-bearing solder contact may cause bubbling.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Harmony","offers":[{"title":"Extra-Soft","offer_id":43587032121558,"sku":"804-404","price":29.46,"currency_code":"USD","in_stock":false},{"title":"Soft","offer_id":47562685055190,"sku":"804-405","price":40.22,"currency_code":"USD","in_stock":true},{"title":"Medium","offer_id":47562358948054,"sku":"804-406","price":40.39,"currency_code":"USD","in_stock":true},{"title":"Medium-Hard","offer_id":47561579954390,"sku":"804-407","price":41.17,"currency_code":"USD","in_stock":true},{"title":"Hard","offer_id":47557498929366,"sku":"804-408","price":41.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/silver-sheet-solders-extra-soft-soft-med-med-hard-and-hard-14-oz-sheets-otto-frei.jpg?v=1719955722"},{"product_id":"silver-paste-solder-extra-easy-easy-medium-hard-syringe","title":"Silver Paste Solders-Extra Easy,Easy, Medium \u0026 Hard","description":"\u003cp\u003eSilver Paste Solders from Otto Frei offer four flow-point options — Extra Easy, Easy, Medium, and Hard — giving jewelers and metalsmiths precise control over torch soldering sequences. Each syringe contains approximately 10 pennyweights (10 DWT \/ ½ troy ounce) of silver solder pre-mixed with paste flux, making application clean, consistent, and easy to control. The paste extrudes directly from the syringe for accurate placement on your work. \u003cstrong\u003eThis paste silver solder is intended for hard (torch) soldering — brazing — only.\u003c\/strong\u003e All formulas are cadmium-free and lead-free.\u003c\/p\u003e\u003cp\u003eThe grades Extra Easy, Easy, Medium, and Hard describe the \u003cem\u003erelative temperature flow points\u003c\/em\u003e within a solder family. Extra Easy flows at the lowest temperature; Hard flows at the highest. As a general rule, higher flow-point solders carry a higher silver content, which improves color match to sterling silver and can contribute to stronger bonds. When manufacturing, begin with the hardest (highest-temperature) solder so that subsequent repairs can be made using lower-temperature grades without re-flowing earlier joints. When making repairs, use the lowest-temperature solder available since the alloys used originally are unknown.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWarning: Paste flux contains fluorides. Use in a well-ventilated area.\u003c\/strong\u003e\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFour flow-point grades available: Extra Easy, Easy, Medium, and Hard\u003c\/li\u003e\n\u003cli\u003ePre-mixed with paste flux for ready-to-use convenience\u003c\/li\u003e\n\u003cli\u003eSyringe delivery allows precise, controlled application\u003c\/li\u003e\n\u003cli\u003eEach syringe contains approximately 10 DWT (½ troy ounce) of paste solder\u003c\/li\u003e\n\u003cli\u003eCadmium-free and lead-free formulas\u003c\/li\u003e\n\u003cli\u003eFor hard (torch) soldering \/ brazing only\u003c\/li\u003e\n\u003cli\u003ePaste flux contains fluorides — use with appropriate ventilation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eForm\u003c\/th\u003e\n\u003ctd\u003ePaste solder in syringe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNet Weight per Syringe\u003c\/th\u003e\n\u003ctd\u003eApproximately 10 DWT (10 pennyweights \/ ½ troy ounce)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication Method\u003c\/th\u003e\n\u003ctd\u003eHard (torch) soldering — brazing only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlux Type\u003c\/th\u003e\n\u003ctd\u003ePaste flux (contains fluorides)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCadmium \u0026amp; Lead\u003c\/th\u003e\n\u003ctd\u003eFree of cadmium and lead\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eAvailable Options\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eGrade\u003c\/th\u003e\n\u003cth\u003eSilver Content\u003c\/th\u003e\n\u003cth\u003eFlow Point\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e154.829\u003c\/td\u003e\n\u003ctd\u003eExtra Easy\u003c\/td\u003e\n\u003ctd\u003e56% Silver\u003c\/td\u003e\n\u003ctd\u003e1200°F (650°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e154.830\u003c\/td\u003e\n\u003ctd\u003eEasy\u003c\/td\u003e\n\u003ctd\u003e65% Silver\u003c\/td\u003e\n\u003ctd\u003e1240°F (670°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e154.831\u003c\/td\u003e\n\u003ctd\u003eMedium\u003c\/td\u003e\n\u003ctd\u003e70% Silver\u003c\/td\u003e\n\u003ctd\u003e1275°F (690°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e154.832\u003c\/td\u003e\n\u003ctd\u003eHard\u003c\/td\u003e\n\u003ctd\u003e75% Silver\u003c\/td\u003e\n\u003ctd\u003e1365°F (740°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eNotes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFlow-point grade labels (Extra Easy through Hard) are relative within a product family. Flow temperatures can vary between manufacturers — one maker's Medium may flow at the same temperature as another maker's Hard.\u003c\/li\u003e\n\u003cli\u003ePaste flux contains fluorides. Ensure adequate ventilation when using this product.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Otto Frei","offers":[{"title":"Extra Easy","offer_id":43587032318166,"sku":"154.829","price":36.3,"currency_code":"USD","in_stock":false},{"title":"Easy","offer_id":47807136760022,"sku":"154.830","price":40.8,"currency_code":"USD","in_stock":false},{"title":"Medium","offer_id":47807136792790,"sku":"154.831","price":43.25,"currency_code":"USD","in_stock":true},{"title":"Hard","offer_id":47807136825558,"sku":"154.832","price":47.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/silver-paste-solders-extra-easyeasy-medium-and-hard-otto-frei.jpg?v=1719955722"},{"product_id":"silver-30-gauge-speedwire-laserwire","title":"Speedwire Silver 30 Gauge Laserwire With Dispenser \u0026 Refills","description":"\u003cp\u003e\u003cstrong\u003eSpeedwire \u003c\/strong\u003eis a revolutionary laser welding wire dispenser that solves the problem of how to precisely control and place laser wire.  \u003cb\u003eThis Speedwire dispenser comes pre-loaded with specially formulated H-80 silver laser wire \u003c\/b\u003ewhich is an alloy of 80% silver, the balance being copper and a small amount of zinc. \u003cem\u003eIt is a good laserwire for silver repair and works good with eyeglass repair jobs too.\u003c\/em\u003e \u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cspan style=\"color:#ff0000;\"\u003e\u003cstrong\u003eChoose from dispenser or refill\u003c\/strong\u003e:\u003c\/span\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e804-850  \u003cstrong\u003e30 Gauge With Dispenser\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e804-850  \u003cstrong\u003e30 Gauge Refill only\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe laser welding wire is housed in a sealed see through compartment in the rear of the dispenser.  To use the laser wire, simply move the rollers forward with your fingertip to precisely dispense the wire through the stainless steel guide tube. You can also move the rollers in the opposite direction to retract the wire. Because you are no longer holding laserwire directly in your hand, the chances of an accidental finger burn are greatly reduced.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpeedwire\u003c\/strong\u003e saves time and improves accuracy when laser welding. The wire is supported by the stainless steel tube as close as 2mm from the weld.  This allows the laser operator to easily control the position of the wire.  Because the wire is fed out by fingertip control, it is not necessary for the laser operator to move their hands or the work piece.  This saves time used in repositioning and refocusing.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpeedwire \u003c\/strong\u003eis color coded for metal type and clearly labeled with wire gauge and metal quality. The annealed coil of wire is kept clean and tangle free.  The remaining wire can easily be monitored preventing unexpected wire shortage. Speedwire dispensers and refills contain 10 feet of laserwire, in either 32 gauge (.008\"\/0.20mm) or 30 gauge (.010\"\/0.25mm) diameter. Speedwire laserwire is karat material and not solders, as laser welding uses the parent metal as the filler.  The results are seamless joins that wear and tarnish at the same rate as the remainder of the piece.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e","brand":"Speedwire","offers":[{"title":"30Ga. w\/ Dispenser","offer_id":43587215556822,"sku":"804-850","price":125.75,"currency_code":"USD","in_stock":true},{"title":"30Ga. Refill only","offer_id":43587215589590,"sku":"804-850RF","price":49.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/804-850NEW_thumb_6b2239a6-cab8-4eac-8da7-dc94cc903ecf.jpg?v=1753297379"},{"product_id":"sterling-silver-laser-welder-wire-quarter-ounce-26-30ga","title":"Sterling Silver Laser Welder Wire-1\/4 Ounce Coils-26 \u0026 30 Ga.","description":"\u003cp\u003eLaser welding requires using the same material as your workpiece — not solder, but true welding wire matched to your base metal. This sterling silver laser wire is alloyed at 0.925 silver and 0.075 copper, making it a precise match for sterling silver work. Available in two fine gauges, the wire is sold in coils weighing approximately 1\/4 troy ounce (5 dwt \/ 7.7 grams) each, giving you a practical working quantity for bench use.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTrue laser welding wire — not solder — designed for use with laser welder systems\u003c\/li\u003e\n\u003cli\u003eSterling silver alloy: 0.925 silver \/ 0.075 copper for accurate metal matching\u003c\/li\u003e\n\u003cli\u003eAvailable in two fine gauges to suit different laser welding applications\u003c\/li\u003e\n\u003cli\u003eSold in convenient 1\/4 troy ounce coils (approximately 5 dwt \/ 7.7 grams)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSterling Silver (0.925 Ag \/ 0.075 Cu)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eForm\u003c\/th\u003e\n\u003ctd\u003eWire coil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoil Weight\u003c\/th\u003e\n\u003ctd\u003eApproximately 1\/4 troy ounce (5 dwt \/ 7.7 grams)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003ctd\u003eLaser welding wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eAvailable Options\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eGauge\u003c\/th\u003e\n\u003cth\u003eDiameter (mm)\u003c\/th\u003e\n\u003cth\u003eDiameter (in)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e804-403\/26\u003c\/td\u003e\n\u003ctd\u003e26 Gauge\u003c\/td\u003e\n\u003ctd\u003e0.40 mm\u003c\/td\u003e\n\u003ctd\u003e0.016\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e804-403\/30\u003c\/td\u003e\n\u003ctd\u003e30 Gauge\u003c\/td\u003e\n\u003ctd\u003e0.25 mm\u003c\/td\u003e\n\u003ctd\u003e0.010\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Otto Frei","offers":[{"title":"26 Gauge","offer_id":47551355584726,"sku":"804-403\/26","price":16.0,"currency_code":"USD","in_stock":false},{"title":"30 Gauge","offer_id":47551355617494,"sku":"804-403\/30","price":51.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/sterling-silver-laser-welder-wire-14-ounce-coils-26-and-30-ga-otto-frei.jpg?v=1719955583"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/collections\/silver-wire-solders-extra-easy-easy-med-and-hard-14-oz-coils-otto-frei.jpg?v=1759158773","url":"https:\/\/www.ottofrei.com\/collections\/silver-solder-jewelry-torch-soldering.oembed","provider":"Otto Frei","version":"1.0","type":"link"}