Gold Clipped Plumb Hard Flow Cadmium Free Solder, 1 DWT Pack

Hard flow solder chips for 14K white gold work, sized to be picked up and set on the joint one at a time. This clipped plumb solder from Speedwire is cut into precise 1 mm × 1 mm squares, so a jeweler can meter the solder at the seam, cut waste, and keep fabrication and repair joins consistent.

It is the hard flow grade of the clipped plumb 14K white gold solder series, flowing at 1570°F, and is intended for use early in a multi-step soldering sequence where the higher flow temperature is required. The cadmium-free formulation meets modern safety and compliance standards for professional studio and production environments.

Features

• Cadmium-free formulation, safe for professional studio use
• Hard flow grade, for the first solder join in a multi-step sequence
• Pre-clipped 1 mm × 1 mm squares for precise placement and minimal waste
• Plumb gold, matched to 14K white gold alloy standards
• Consistent 1570°F flow temperature for repeatable results
• Sold in packs of approximately 1 DWT

Notes

Use the hard flow grade first when soldering a piece in several steps, so that earlier joins do not reflow when the softer solders are applied.