NSK

A micromotor system takes the drilling, grinding, polishing, and stone setting work at the bench with the motor in your hand and the speed under yo...

A high-torque micromotor set for heavy-duty grinding at the bench, where hard metals and carbide tooling demand more of a motor than a standard rot...

The NSK Nakanishi EMax EVOlution 8232 Basic Kit is a professional-grade micromotor system built for the demands of fine goldsmithing and bench work...

A micromotor system for the grinding, drilling, stone setting and polishing done at the jeweler's bench. The Nakanishi NSK EMax EVOlution Micromoto...

A micromotor system for the drilling, grinding, stone setting and polishing work that happens at the jeweler's bench, supplied here as a basic kit ...

A quick change ring type handpiece for detailed engraving, grinding, drilling and finishing at the bench, the IR-310 twists open and twists closed ...

A lever-activated quick-change handpiece for precision rotary work at the bench, so burs swap over without a chuck key in jewelry making and relate...

The NSK FC40 Foot Control is a professional-grade foot pedal designed for use with NSK rotary and precision systems. It serves a dual function—acti...

The NSK EMax EVOlution FC64 Foot Control is a dedicated foot pedal designed for use with NSK EVOlution systems. It functions as both an ON/OFF swit...

The NSK ERG-01B is a precision speed reducer attachment designed exclusively for use with the NSK Espert 500 system. This reduction gear attachment...

A speed-reducing attachment for stone setting, seat cutting, and precision hole drilling, the RG-01 mounts between a compatible micromotor and hand...

A slim brushless micromotor carries the drilling, grinding, and stone setting work at the bench with no brushes to replace. The NSK Emax Evolution ...

When larger burs load down a standard micromotor, a hi-torque motor keeps the cut moving at the bench. The NSK Emax Evolution ENK-250T is a brushle...

A standard micromotor for high-speed rotary work at the bench, reaching a maximum speed of 35,000 RPM for drilling, grinding, and finishing that re...

A hammer handpiece for controlled, repeatable impact work at the bench, for hammer setting, texturing, and other tasks that call for measured blows...

The NSK RE65301 is a blank replacement tip (point-bit) designed exclusively for use with the NSK HA500 hammer handpiece. Supplied in blank form, th...

The Nakanishi NSK Luster LS-100 is a professional reciprocating stroke polishing handpiece designed for use with Nakanishi NSK Emax EVOlution and E...

When a straight handpiece cannot sit square to the work, a 45º angle attachment puts the bur into corners and recessed areas at the bench. The Naka...

The Nakanishi NSK KBS-101 Belt Sander Handpiece is a precision attachment designed for controlled sanding of flat and curved surfaces in fine detai...

A reciprocating polishing handpiece for narrow grooves, fine details, and hard-to-reach areas at the bench, operated with a pencil-style grip that ...

The Nakanishi NSK Swing-Luster SLS-16 Attachment Handpiece (LS11380) is a precision reciprocating polishing handpiece designed for use with the Ema...

Nakanishi NSK 3/32" (2.35mm) Collet for Quick Change Handpieces — Catalog Number RE11625, Model Number CHH-2.35. This replacement collet is designe...

The Nakanishi NSK 1/16" (1.6mm) Collet is a precision replacement collet designed for use with select NSK quick-change handpieces. Identified by ca...

Keep your NSK Electer E-Max micromotor running at peak performance with genuine replacement carbon brushes. Regular brush replacement is a standard...

The Nakanishi NSK Emax EVOlution NE-249 (Catalog Number EMX8224) is the upgraded successor to the Electer E-max control unit, delivering meaningful...

The NSK 8004 Coiled Power Cord is a genuine replacement cord designed specifically for the NCL-351C Electer Standard Motor. Identified by its disti...

The NSK 8090 is a replacement coiled cord and switch assembly designed specifically for use with NSK ENK-410S motors. When the cord or switch on yo...

The NSK 8091 is a genuine replacement coiled cord and switch assembly designed specifically for NSK EN-250C torque motors. When the cord or switch ...