{"title":"Raytech","description":"","products":[{"product_id":"raytech-porcelain-balls-1mm-1lb","title":"Porcelain Balls 1mm Diameter-1 Lb Pack","description":"\u003cp\u003ePorcelain ball media in 1 mm diameter for mass finishing and deburring of jewelry, castings, and fabricated metal parts. This micro-abrasive ceramic cuts, cleans, and leaves an extremely smooth surface that is bright but not mirror-reflective. A lighter alternative to steel shot, porcelain media is well suited for smaller vibratory bowls or rotary barrels where machine weight limits apply. Its gentle action makes it ideal for delicate work where steel might cause ding marks or edge damage. Use wet with a suitable detergent or burnishing compound. Sold in a 1 lb pack.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 mm diameter porcelain spheres for fine cutting and smoothing\u003c\/li\u003e\n\u003cli\u003eProduces a bright, non-reflective finish on metal surfaces\u003c\/li\u003e\n\u003cli\u003eCompatible with vibratory and rotary tumbling processes\u003c\/li\u003e\n\u003cli\u003eLighter than steel media — ideal where machine weight limits apply\u003c\/li\u003e\n\u003cli\u003eLong service life; gentle on delicate edges, details, and fine work\u003c\/li\u003e\n\u003cli\u003eLess likely to ding or mar sensitive pieces compared to steel shot\u003c\/li\u003e\n\u003cli\u003eSold by the pound\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eMedia Type\u003c\/th\u003e\n\u003ctd\u003ePorcelain (ceramic) balls\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish Result\u003c\/th\u003e\n\u003ctd\u003eVery smooth, bright — not mirror-reflective\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Processes\u003c\/th\u003e\n\u003ctd\u003eVibratory and rotary tumbling (wet)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse With\u003c\/th\u003e\n\u003ctd\u003eWater and detergent or burnishing compound\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e1 lb (0.45 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCutting and cleaning castings and fabricated metal parts\u003c\/li\u003e\n\u003cli\u003eSmoothing surfaces prior to final polish\u003c\/li\u003e\n\u003cli\u003eAlternative to steel shot where weight limits or marring are a concern\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse wet with a small amount of detergent or burnishing compound.\u003c\/li\u003e\n\u003cli\u003eExpect longer cycle times compared to steel shot media.\u003c\/li\u003e\n\u003cli\u003eRequires a brief break-in period — media develops a glazed surface after initial runs.\u003c\/li\u003e\n\u003cli\u003eFor best coverage and tumbling action, consider running a mix of porcelain ball sizes.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Raytech","offers":[{"title":"Default Title","offer_id":43580247572694,"sku":"147.601","price":14.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/porcelain-balls-1mm-diameter-1-lb-pack-otto-frei.jpg?v=1719958167"},{"product_id":"raytech-porcelain-tumbling-balls-2mm-1lb","title":"Porcelain Balls 2mm Diameter-1 Lb Pack","description":"\u003cp\u003eRaytech 2 mm porcelain ball media is designed for mass finishing and deburring of jewelry, castings, and fabricated metal parts. This micro-abrasive ceramic media cuts, cleans, and leaves an extremely smooth surface that is bright but not mirror-reflective. Lighter than steel shot, porcelain balls are well suited for smaller vibratory bowls or rotary barrels where steel weight may be a concern, and they are less likely to ding or mar delicate edges and fine details. Media must be used wet with a suitable detergent or burnishing compound. Sold in a 1 lb pack.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2 mm diameter porcelain spheres for fine cutting and smoothing\u003c\/li\u003e\n\u003cli\u003eProduces a bright, non-reflective finish on metal surfaces\u003c\/li\u003e\n\u003cli\u003eCompatible with vibratory and rotary tumbling processes\u003c\/li\u003e\n\u003cli\u003eLighter than steel shot — ideal for machines not rated for steel media weight\u003c\/li\u003e\n\u003cli\u003eLong service life; gentle on delicate edges and fine details\u003c\/li\u003e\n\u003cli\u003eSuitable for cutting and cleaning castings and fabricated parts\u003c\/li\u003e\n\u003cli\u003eEffective as a pre-polish smoothing stage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eMedia Type\u003c\/th\u003e\n\u003ctd\u003ePorcelain (ceramic) balls\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish Result\u003c\/th\u003e\n\u003ctd\u003eVery smooth, bright (not mirror-reflective)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Processes\u003c\/th\u003e\n\u003ctd\u003eVibratory and rotary tumbling (wet)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse With\u003c\/th\u003e\n\u003ctd\u003eWater and detergent or burnishing compound\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e1 lb (0.45 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplier\u003c\/th\u003e\n\u003ctd\u003eRaytech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAlways use wet with a small amount of detergent or burnishing compound.\u003c\/li\u003e\n\u003cli\u003eExpect longer cycle times compared to steel shot.\u003c\/li\u003e\n\u003cli\u003eAllow a brief break-in period; media develops a glazed surface after initial runs.\u003c\/li\u003e\n\u003cli\u003eFor improved coverage and tumbling action, consider running a mix of porcelain ball sizes together.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Raytech","offers":[{"title":"Default Title","offer_id":43580248981718,"sku":"147.602","price":13.65,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/porcelain-balls-2mm-diameter-1-lb-pack-otto-frei.jpg?v=1719958167"},{"product_id":"porcelain-tumbling-balls-3mm-1lb","title":"Porcelain Balls 3mm Diameter- 1 Lb Pack","description":"\u003cp\u003e3 mm porcelain ball media for mass finishing and deburring. This micro-abrasive ceramic cuts, cleans, and leaves an extremely smooth surface that is bright but not reflective. A lighter alternative to steel shot for smaller vibratory bowls or rotary barrels, porcelain media has a long service life and is less likely to damage delicate work. Use wet with a suitable detergent compound.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e3 mm diameter porcelain spheres for fine cutting and smoothing\u003c\/li\u003e\n  \u003cli\u003eProduces a bright, non-reflective finish\u003c\/li\u003e\n  \u003cli\u003eWorks in vibratory and rotary tumblers\u003c\/li\u003e\n  \u003cli\u003eLighter than steel — ideal where machine weight limits apply\u003c\/li\u003e\n  \u003cli\u003eVery long service life; gentle on delicate edges and details\u003c\/li\u003e\n  \u003cli\u003eSold by the pound\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMedia Type\u003c\/th\u003e\n\u003ctd\u003ePorcelain (ceramic) balls\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFinish Result\u003c\/th\u003e\n\u003ctd\u003eVery smooth, bright (not mirror-reflective)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCompatible Processes\u003c\/th\u003e\n\u003ctd\u003eVibratory and rotary tumbling (wet)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eUse With\u003c\/th\u003e\n\u003ctd\u003eWater and detergent or burnishing compound\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e1 lb (0.45 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCutting and cleaning castings and fabricated parts\u003c\/li\u003e\n  \u003cli\u003eSmoothing prior to final polish\u003c\/li\u003e\n  \u003cli\u003eAlternative to steel where weight or marring is a concern\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eUse wet with a small amount of detergent or burnishing compound.\u003c\/li\u003e\n  \u003cli\u003eExpect longer cycle times than steel shot.\u003c\/li\u003e\n  \u003cli\u003eRequires a brief break-in period; media develops a glazed surface after initial runs.\u003c\/li\u003e\n  \u003cli\u003eFor best results, run a mix of sizes to improve coverage and action.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Raytech","offers":[{"title":"Default Title","offer_id":43580251406550,"sku":"147.603","price":13.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/porcelain-balls-3mm-diameter-1-lb-pack-otto-frei.jpg?v=1719958167"},{"product_id":"raytech-porcelain-balls-4mm-1lb","title":"Porcelain Balls 4mm Diameter-1 Lb Pack","description":"\u003cp\u003ePorcelain ball media in a 4 mm diameter for mass finishing and deburring of jewelry, castings, and fabricated metal parts. This micro-abrasive ceramic cuts, cleans, and leaves an extremely smooth surface that is bright but not mirror-reflective. A lighter alternative to steel shot, porcelain media is well suited for smaller vibratory bowls or rotary barrels where machine weight limits apply. Long service life and gentle action make it a smart choice for preserving fine details and delicate edges. Sold in a 1 lb pack. Use wet with a suitable detergent or burnishing compound.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e4 mm diameter porcelain spheres for fine cutting and smoothing\u003c\/li\u003e\n\u003cli\u003eProduces a bright, non-reflective finish on metal surfaces\u003c\/li\u003e\n\u003cli\u003eCompatible with vibratory and rotary tumblers\u003c\/li\u003e\n\u003cli\u003eLighter than steel shot — ideal where machine weight limits apply\u003c\/li\u003e\n\u003cli\u003eVery long service life; gentle on delicate edges and fine details\u003c\/li\u003e\n\u003cli\u003eSold by the pound\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eMedia Type\u003c\/th\u003e\n\u003ctd\u003ePorcelain (ceramic) balls\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish Result\u003c\/th\u003e\n\u003ctd\u003eVery smooth, bright (not mirror-reflective)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Processes\u003c\/th\u003e\n\u003ctd\u003eVibratory and rotary tumbling (wet)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse With\u003c\/th\u003e\n\u003ctd\u003eWater and detergent or burnishing compound\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e1 lb (0.45 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCutting and cleaning castings and fabricated parts\u003c\/li\u003e\n\u003cli\u003eSmoothing metal surfaces prior to final polish\u003c\/li\u003e\n\u003cli\u003eLighter-weight alternative to steel shot where marring is a concern\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse wet with a small amount of detergent or burnishing compound.\u003c\/li\u003e\n\u003cli\u003eExpect longer cycle times compared to steel shot.\u003c\/li\u003e\n\u003cli\u003eRequires a brief break-in period; media develops a glazed surface after initial runs.\u003c\/li\u003e\n\u003cli\u003eFor best results, consider running a mix of sizes to improve media coverage and tumbling action.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Raytech","offers":[{"title":"Default Title","offer_id":43580252029142,"sku":"147.604","price":13.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/porcelain-balls-4mm-diameter-1-lb-pack-otto-frei.jpg?v=1719958166"},{"product_id":"raytech-porcelain-tumbling-balls-6mm-1lb","title":"Porcelain Balls 6mm Diameter-1 Lb Pack","description":"\u003cp\u003ePorcelain ball media in a 6 mm diameter for mass finishing and deburring in vibratory and rotary tumblers. This micro-abrasive ceramic cuts, cleans, and leaves an extremely smooth surface that is bright but not mirror-reflective. A lighter alternative to steel shot, porcelain media is well suited for smaller vibratory bowls or rotary barrels where machine weight limits apply. Its gentler action reduces the risk of dinging or marring delicate work, and the long service life makes it an economical choice for production and bench use alike. Use wet with a suitable detergent or burnishing compound. Sold in a 1 lb pack.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e6 mm diameter porcelain spheres for fine cutting and smoothing\u003c\/li\u003e\n\u003cli\u003eProduces a bright, non-reflective finish on castings and fabricated parts\u003c\/li\u003e\n\u003cli\u003eCompatible with vibratory and rotary tumblers (wet process)\u003c\/li\u003e\n\u003cli\u003eLighter than steel — ideal where machine weight limits apply\u003c\/li\u003e\n\u003cli\u003eLong service life; gentle on delicate edges and fine details\u003c\/li\u003e\n\u003cli\u003eSold by the pound\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eMedia Type\u003c\/th\u003e\n\u003ctd\u003ePorcelain (ceramic) balls\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish Result\u003c\/th\u003e\n\u003ctd\u003eVery smooth, bright (not mirror-reflective)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Processes\u003c\/th\u003e\n\u003ctd\u003eVibratory and rotary tumbling (wet)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse With\u003c\/th\u003e\n\u003ctd\u003eWater and detergent or burnishing compound\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e1 lb (0.45 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse wet with a small amount of detergent or burnishing compound.\u003c\/li\u003e\n\u003cli\u003eExpect longer cycle times compared to steel shot.\u003c\/li\u003e\n\u003cli\u003eMedia develops a glazed surface after initial break-in runs, which is normal.\u003c\/li\u003e\n\u003cli\u003eFor best results, run a mix of sizes to improve coverage and tumbling action.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Raytech","offers":[{"title":"Default Title","offer_id":43580252324054,"sku":"147.605","price":12.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/porcelain-balls-6mm-diameter-1-lb-pack-otto-frei.jpg?v=1719958166"},{"product_id":"raytech-tv-5-replacement-bowl-cover","title":"TV-5  Extra Bowl \u0026 Cover","description":"\u003cp\u003eKeep your Raytech TV-5 tumbler running with a genuine replacement bowl and cover. This set provides the essential vibratory chamber components needed to restore or extend the working life of your TV-5 unit, making it a practical addition to any professional finishing setup.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReplacement bowl and cover designed specifically for the Raytech TV-5 vibratory tumbler\u003c\/li\u003e\n\u003cli\u003eAllows continued operation when the original bowl or cover becomes worn or damaged\u003c\/li\u003e\n\u003cli\u003eGenuine Raytech component for assured fit and function\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Unit\u003c\/th\u003e\n\u003ctd\u003eRaytech TV-5 Vibratory Tumbler\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncludes\u003c\/th\u003e\n\u003ctd\u003eBowl and cover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Raytech","offers":[{"title":"Default Title","offer_id":43580374745302,"sku":"147.704","price":31.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/tv-5-extra-bowl-and-cover-otto-frei.jpg?v=1719958131"},{"product_id":"raytech-tv-5-replacement-rubber-nut-lid","title":"TV-5 Replacement Rubber Nut For Lid","description":"\u003cp\u003eKeep your Raytech TV-5 tumbler running smoothly with this replacement rubber nut designed for the lid. When the original nut wears out or goes missing, this direct replacement helps restore a proper seal and secure fit for continued tumbling operation.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReplacement rubber nut specifically designed for the TV-5 tumbler lid\u003c\/li\u003e\n\u003cli\u003eHelps maintain a secure lid fit during tumbling operations\u003c\/li\u003e\n\u003cli\u003eCompatible with Raytech TV-5 vibratory tumblers\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Raytech","offers":[{"title":"Default Title","offer_id":43580376514774,"sku":"147.705","price":2.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/tv-5-replacement-rubber-nut-for-lid-otto-frei.jpg?v=1719958131"},{"product_id":"raytech-coarse-cut-brown-plastic-pyramids-quarter-inch-1lb","title":"Coarse Cut Brown 1\/4\" Plastic Pyramids-1 Lb Pack","description":"\u003cp\u003eCoarse Cut Brown 1\/4\" Plastic Pyramids are a plastic-bonded abrasive media designed for \u003cstrong\u003ewet tumbling and vibratory finishing\u003c\/strong\u003e. Use with a small amount of water and an appropriate detergent compound to break sharp edges, deburr, and establish a uniform surface on medium-hard or soft metals. Sold in a 1 lb pack.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCoarse-cut plastic pyramids for fast, uniform material removal\u003c\/li\u003e\n\u003cli\u003eIdeal first step before medium and fine plastic media\u003c\/li\u003e\n\u003cli\u003ePyramid shape reaches edges and interior features effectively\u003c\/li\u003e\n\u003cli\u003eUse with water and detergent compound in vibratory or rotary equipment\u003c\/li\u003e\n\u003cli\u003ePrepares parts for burnishing with steel shot or dry final polish\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eRaytech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMedia Type\u003c\/th\u003e\n\u003ctd\u003ePlastic-bonded abrasive (wet process)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ Cut\u003c\/th\u003e\n\u003ctd\u003eBrown – Coarse\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShape\u003c\/th\u003e\n\u003ctd\u003ePyramid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNominal Size\u003c\/th\u003e\n\u003ctd\u003e1\/4 in (≈ 6.4 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold By\u003c\/th\u003e\n\u003ctd\u003e1 lb pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eRecommended Process Pathway\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoarse cut (this media)\u003c\/strong\u003e – establish a uniform surface and remove burrs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMedium cut\u003c\/strong\u003e – refine the surface with Medium Cut Dark Green 1\/4\" Plastic Pyramids.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFine cut\u003c\/strong\u003e – smooth to pre-polish with Fine Cut Light Green 1\/4\" Plastic Pyramids.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional burnish\u003c\/strong\u003e – brighten with Stainless Steel Mixed Shot, or proceed directly to a dry final polish.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdd water to maintain a thin slurry; refresh compound as needed based on load and soil level.\u003c\/li\u003e\n\u003cli\u003eCheck parts periodically—cycle time depends on metal, mass, and machine type.\u003c\/li\u003e\n\u003cli\u003eRinse media and parts thoroughly after use to maintain cutting performance and avoid residue buildup.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Raytech","offers":[{"title":"Default Title","offer_id":43580377694422,"sku":"147.750","price":16.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/coarse-cut-brown-14-plastic-pyramids-1-lb-pack-otto-frei.jpg?v=1719958131"},{"product_id":"medium-cut-1-4-plastic-pyramids-tumbling-media","title":"Medium Cut Dark Green 1\/4\" Plastic Pyramids  1 Lb Pack","description":"\u003cp\u003eMedium cut dark green 1\/4\" plastic pyramids are plastic bonded abrasive tumbling media used to produce a uniform finish on medium-hard and soft metals, sold loose by the pound for flexible batch sizes. In the tumbler, these dark green pyramids flow around your workpieces, steadily knocking down tool marks and blending surfaces for the next finishing step.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProduces an even, matte pre-polish that smooths tool marks before final burnishing or dry polishing.\u003c\/li\u003e\n\u003cli\u003eWell suited to jewelry and small metal components in softer, non-ferrous alloys.\u003c\/li\u003e\n\u003cli\u003eDesigned for wet finishing with a small amount of water and a compatible detergent compound to carry away debris.\u003c\/li\u003e\n\u003cli\u003eWorks as the middle stage in a three-step plastic media sequence between coarse cut and fine cut media.\u003c\/li\u003e\n\u003cli\u003eBulk, pound-based packaging makes it easy to add or replace media in your tumbler as needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMedia Type\u003c\/th\u003e\n\u003ctd\u003ePlastic bonded abrasive tumbling media\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut Grade\u003c\/th\u003e\n\u003ctd\u003eMedium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eDark green\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShape\u003c\/th\u003e\n\u003ctd\u003ePyramids\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNominal Size\u003c\/th\u003e\n\u003ctd\u003e1\/4 in (6.4 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold By\u003c\/th\u003e\n\u003ctd\u003ePound (loose bulk media)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended Metals\u003c\/th\u003e\n\u003ctd\u003eMedium-hard and soft metals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eUse with a small amount of water and an appropriate detergent compound for best cutting action and to keep media clean. For a three-step plastic media process, start with coarse cut brown pyramids, move to these medium cut dark green pyramids, then finish with fine cut light green pyramids before burnishing with steel shot or proceeding directly to final dry polishing media.\u003c\/p\u003e","brand":"Raytech","offers":[{"title":"Default Title","offer_id":43580378939606,"sku":"147.753","price":14.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/medium-cut-dark-green-14-plastic-pyramids-1-lb-pack-otto-frei.jpg?v=1719958132"},{"product_id":"raytech-fine-cut-light-green-quarter-inch-plastic-pyramids-1lb","title":"Fine Cut Light Green 1\/4\" Plastic Pyramids 1 Lb Pack","description":"\u003cp\u003eFine Cut Light Green 1\/4\" Plastic Pyramids are plastic-bonded abrasive media designed for \u003cstrong\u003ewet tumbling and vibratory finishing\u003c\/strong\u003e. Used with a small amount of water and an appropriate detergent compound, this fine-cut media refines surfaces on soft and medium-hard metals to a smooth, pre-polish condition. Typically the third step in a progressive tumbling sequence, these pyramid-shaped pieces reach edges and interior features effectively. Sold in a 1 lb pack.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFine-cut plastic pyramids for very smooth surface conditioning\u003c\/li\u003e\n\u003cli\u003eExcellent on softer metals including aluminum, brass, zinc, and copper alloys\u003c\/li\u003e\n\u003cli\u003ePyramid shape accesses edges and interior features effectively\u003c\/li\u003e\n\u003cli\u003ePrepares parts for burnishing with steel shot or dry final polish\u003c\/li\u003e\n\u003cli\u003eApproximately 30% lighter than ceramic media; does not peen burrs or discolor metals\u003c\/li\u003e\n\u003cli\u003eSuitable for parts destined for anodizing, plating, or painting\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFormerly white\u003c\/em\u003e — dye lots may vary; cutting action remains consistent\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eMedia Type\u003c\/th\u003e\n\u003ctd\u003ePlastic-bonded abrasive (wet process)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColor \/ Cut\u003c\/th\u003e\n\u003ctd\u003eLight Green – Fine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShape\u003c\/th\u003e\n\u003ctd\u003ePyramid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNominal Size\u003c\/th\u003e\n\u003ctd\u003e1\/4 in (≈ 6.4 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold By\u003c\/th\u003e\n\u003ctd\u003e1 lb pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eRecommended Process Pathway\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoarse cut\u003c\/strong\u003e – establish a uniform surface and remove burrs using Coarse Cut Brown 1\/4\" Plastic Pyramids.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMedium cut\u003c\/strong\u003e – refine the surface using Medium Cut Dark Green 1\/4\" Plastic Pyramids.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFine cut (this media)\u003c\/strong\u003e – smooth to pre-polish condition.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional burnish\u003c\/strong\u003e – brighten with stainless steel mixed shot, or proceed directly to a dry final polish.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaintain a light slurry with water; add detergent compound as needed during the cycle.\u003c\/li\u003e\n\u003cli\u003eCheck parts periodically — cycle time varies depending on alloy, mass, and machine type.\u003c\/li\u003e\n\u003cli\u003ePlastic media does not peen burrs and will not discolor metals, making it well suited for pre-finishing prior to anodizing, plating, or painting.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Raytech","offers":[{"title":"Default Title","offer_id":43580380512470,"sku":"147.756","price":14.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/fine-cut-light-green-14-plastic-pyramids-1-lb-pack-otto-frei.jpg?v=1719958128"},{"product_id":"raytech-dri-shine-iii-dry-polishing-media-1lb","title":"Dri-Shine III Polishing Media-1 Lb Pack","description":"\u003cp\u003e\u003cstrong\u003eDri-Shine III\u003c\/strong\u003e is a premium dry polishing media made from finely pulverized corncob impregnated with red rouge compound. Formulated for use in vibratory or rotary tumblers, this media delivers a \u003cstrong\u003etarnish-free, high-luster finish\u003c\/strong\u003e on gold, silver, brass, copper, titanium, and stainless steel. Its corncob base makes it lightweight, clean-running, and biodegradable, providing both polishing and light burnishing action without affecting the surface integrity of your parts.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDry corncob-based media impregnated with fine red rouge compound\u003c\/li\u003e\n\u003cli\u003eProduces a superior, tarnish-resistant bright finish on precious and non-ferrous metals\u003c\/li\u003e\n\u003cli\u003eCompatible with both \u003cstrong\u003evibratory and rotary tumblers\u003c\/strong\u003e for consistent results\u003c\/li\u003e\n\u003cli\u003eAbsorbs oils and dirt while drying parts—leaving them clean and ready for assembly or plating\u003c\/li\u003e\n\u003cli\u003eReduces rouge staining, dust, and residue buildup on detailed jewelry pieces\u003c\/li\u003e\n\u003cli\u003eLightweight, biodegradable, and safe to handle; well-suited for small jewelry and fine detailing\u003c\/li\u003e\n\u003cli\u003eUse \u003cem\u003edry only\u003c\/em\u003e—no water or liquid compounds required\u003c\/li\u003e\n\u003cli\u003eAfter tumbling, remove media dust or rouge with a soft brush or compressed air\u003c\/li\u003e\n\u003cli\u003eAvoid overloading the bowl or barrel to ensure parts remain free-moving\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eRaytech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMedia Type\u003c\/th\u003e\n\u003ctd\u003eDry corncob granulate impregnated with red rouge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBest Used On\u003c\/th\u003e\n\u003ctd\u003eGold, silver, brass, copper, titanium, stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish Type\u003c\/th\u003e\n\u003ctd\u003eHigh-luster, tarnish-free polish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCycle Time\u003c\/th\u003e\n\u003ctd\u003e12–14 hours in vibratory tumblers (varies by load and alloy)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse Ratio\u003c\/th\u003e\n\u003ctd\u003e70% media : 30% workpieces for best results\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShape \/ Structure\u003c\/th\u003e\n\u003ctd\u003eIrregular, pointed granules for effective surface contact\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack Size\u003c\/th\u003e\n\u003ctd\u003e1 lb (≈ 0.45 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDri-Shine III Polishing Media, 1 lb\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Raytech","offers":[{"title":"Default Title","offer_id":43580383297750,"sku":"147.757","price":7.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/dri-shine-iii-polishing-media-1-lb-pack-otto-frei.jpg?v=1719958128"},{"product_id":"raytech-tv-5-3-pint-vibratory-tumbler-rock-polishing-kit-110v","title":"TV-5 3 Pint Vibratory Tumbler Rock Polishing Kit by Raytech - 110V","description":"\u003cp\u003eThe \u003cstrong\u003eRaytech Tumble-Vibe TV-5 Rock Polishing Kit\u003c\/strong\u003e is a complete vibratory tumbling solution for polishing rocks, stones, and glass. Designed for ease of use right out of the box, this kit includes the TV-5 vibratory tumbler and enough finishing media to process \u003cstrong\u003e8–15 pounds of stone\u003c\/strong\u003e from coarse grinding through final polish. The TV-5 features an \u003cstrong\u003e8\" diameter bowl\u003c\/strong\u003e with a \u003cstrong\u003e3-pint (5 lb maximum) capacity\u003c\/strong\u003e and stands 9\" tall — a compact footprint ideal for small-batch lapidary work. \u003cstrong\u003eMade in the USA.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComplete rock polishing kit — includes tumbler, extra bowl, and four finishing media jars\u003c\/li\u003e\n\u003cli\u003eVibratory action gently tumbles stones and glass through progressive finishing stages\u003c\/li\u003e\n\u003cli\u003e8\" diameter bowl accommodates up to 5 lbs of rock and media combined\u003c\/li\u003e\n\u003cli\u003eCompact design — stands only 9\" tall, suitable for bench or countertop use\u003c\/li\u003e\n\u003cli\u003eBest suited for small batches such as up to 25 rings when used with plastic or ceramic media\u003c\/li\u003e\n\u003cli\u003eNot designed for use with steel shot — ceramic ball media recommended as an alternative\u003c\/li\u003e\n\u003cli\u003eDoes not use a flow-through system\u003c\/li\u003e\n\u003cli\u003eIncludes instructional booklet: \u003cem\u003eThe Art and Science of Mass Finishing\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eTumble-Vibe TV-5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBowl Capacity\u003c\/th\u003e\n\u003ctd\u003e3 pints \/ 5 lb maximum (rock and media combined)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBowl Diameter\u003c\/th\u003e\n\u003ctd\u003e8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit Height\u003c\/th\u003e\n\u003ctd\u003e9\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e110V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eMade in the USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Media\u003c\/th\u003e\n\u003ctd\u003ePlastic or ceramic media recommended; steel shot not recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlow-Through System\u003c\/th\u003e\n\u003ctd\u003eNot compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRaytech Tumble-Vibe TV-5 vibratory tumbler (110V)\u003c\/li\u003e\n\u003cli\u003e1 extra TV-5 bowl\u003c\/li\u003e\n\u003cli\u003e1 jar Silicon Carbide 100\/120 media\u003c\/li\u003e\n\u003cli\u003e1 jar Silicon Carbide 700 media\u003c\/li\u003e\n\u003cli\u003e1 jar Iolox 50 media\u003c\/li\u003e\n\u003cli\u003e1 jar Raybite TL media\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eThe Art and Science of Mass Finishing\u003c\/em\u003e instructional booklet\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eThe TV-5 is best suited for small batches — up to 25 rings at a time when used with plastic or ceramic media. Steel shot is not recommended for use in the TV-5 due to its 5 lb combined capacity limit. If steel shot finishing is required, consider a rotary tumbler or a larger vibratory tumbler with a curved bowl design. Ceramic ball media is a suitable alternative to steel shot for burnishing applications.\u003c\/p\u003e","brand":"Raytech","offers":[{"title":"Default Title","offer_id":43582155882710,"sku":"147.715","price":168.75,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/tv-5-3-pint-vibratory-tumbler-rock-polishing-kit-by-raytech-110v-otto-frei.jpg?v=1719957213"},{"product_id":"raytech-tv-5-3-pint-vibratory-tumbler-polishing-kit-110v","title":"TV-5 3-Pint Vibratory Tumbler Metals Polishing Kit - 110V","description":"\u003cp\u003eTake a batch of rings or small parts from tool marks to a bright burnished finish without standing over them at the bench. The \u003cstrong\u003eRaytech TV-5 Vibratory Tumbler Metals Polishing Kit\u003c\/strong\u003e pairs Raytech's compact 3-pint TV-5 tumbler (110V) with the most popular finishing media and compound for efficient small-batch metal polishing. Designed for up to 25 rings per run, this kit takes parts through cutting, pre-polishing, and dry polishing stages, reducing hand finishing time on non-ferrous and precious metals. Made in the USA.\u003c\/p\u003e\u003cp\u003eIt handles deburring, smoothing, and polishing of jewelry and small metal parts in gold, silver, brass, and non-ferrous alloys, and suits small shops, classroom instruction, and prototyping.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3-pint bowl capacity, ideal for small jewelry batches\u003c\/li\u003e\n\u003cli\u003eIncludes cutting, pre-polish, and dry polish media plus all-purpose compound\u003c\/li\u003e\n\u003cli\u003eCompatible with plastic and ceramic media; \u003cstrong\u003enot rated for steel shot\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCompact profile, approximately 9 in tall\u003c\/li\u003e\n\u003cli\u003eRuns on standard 110V power\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cp\u003eThe TV-5 bowl is rated for plastic and ceramic media only and is \u003cstrong\u003enot rated for steel shot\u003c\/strong\u003e. It is not a flow-thru model.\u003c\/p\u003e\u003ch3\u003eNotes\u003c\/h3\u003e\u003cp\u003eWork the stages in order:\u003c\/p\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eCut:\u003c\/strong\u003e Run parts with \u003cem\u003eMedium Cut\u003c\/em\u003e (Dark Green) plastic pyramids to remove tool marks and smooth surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-Polish:\u003c\/strong\u003e Switch to \u003cem\u003eFine Cut\u003c\/em\u003e (Light Green) plastic pyramids to refine the surface finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolish:\u003c\/strong\u003e Finish dry with \u003cem\u003eDri-Shine III\u003c\/em\u003e media for a bright, burnished luster.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003eAdd a small amount of \u003cem\u003eCompound 750\u003c\/em\u003e during the cutting and pre-polish stages to improve cleaning and cutting action. Rinse parts and dry them between each step.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo not use steel shot.\u003c\/strong\u003e This tumbler is rated for plastic and ceramic media only.\u003c\/li\u003e\n\u003cli\u003eDo not exceed 5 lb total load, including both media and parts.\u003c\/li\u003e\n\u003cli\u003eClean bowl and media after each use; store dry.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Raytech","offers":[{"title":"Default Title","offer_id":43582773264598,"sku":"147.701-KIT","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/tv-5-3-pint-vibratory-tumbler-metals-polishing-kit-110v-otto-frei.jpg?v=1719956861"},{"product_id":"raytech-tv-5-3-pint-vibratory-tumbler-polishing-kit-230v","title":"TV-5 3-Pint Vibratory Tumbler Metals Polishing Kit - 230V","description":"\u003cp\u003e\u003cstrong\u003eRaytech TV-5 Vibratory Tumbler Metals Polishing Kit\u003c\/strong\u003e (230V export model) is a compact, 3-pint capacity system designed for small-batch finishing of jewelry components. Ideal for processing up to approximately 25 rings at a time, the TV-5 comes complete with cutting, pre-polish, and dry polish media to reduce hand finishing time. The total load capacity is 5 lb, including both parts and media. Made in the USA.\u003c\/p\u003e\n\u003cp\u003eThe TV-5 is \u003cem\u003enot\u003c\/em\u003e intended for use with steel shot; for steel media applications, a rotary tumbler or a larger vibratory model with a curved bowl is recommended.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3-pint bowl capacity — well suited for small batches and individual jewelry components\u003c\/li\u003e\n\u003cli\u003eKit includes media for cutting, pre-polish, and dry polish stages to minimize hand finishing\u003c\/li\u003e\n\u003cli\u003e230V export model with a compact footprint, approximately 9 in tall\u003c\/li\u003e\n\u003cli\u003eCompatible with plastic and ceramic media; steel shot is not recommended for this bowl design\u003c\/li\u003e\n\u003cli\u003eNot designed for flow-through use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e3 pints (up to approximately 25 rings)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax Load\u003c\/th\u003e\n\u003ctd\u003e5 lb including media and parts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eElectrical\u003c\/th\u003e\n\u003ctd\u003e230V (export)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall Height\u003c\/th\u003e\n\u003ctd\u003eApprox. 9 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eItem\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTumbler\u003c\/td\u003e\n\u003ctd\u003eTV-5 Vibratory Tumbler (230V export)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting Media\u003c\/td\u003e\n\u003ctd\u003eMedium Dark Green Plastic Pyramid Abrasive – 2 lb (147.753)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePre-Polish Media\u003c\/td\u003e\n\u003ctd\u003eFine Light Green Plastic Pyramid Abrasive – 2 lb (147.756)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDry Polish\u003c\/td\u003e\n\u003ctd\u003eDri-Shine III Polishing Media – 1 lb (147.757)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompound\u003c\/td\u003e\n\u003ctd\u003eAll-Purpose Detergent Compound 750 – 1 lb (147.777)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRun media in sequence: Medium cut → Fine pre-polish → Dri-Shine III dry polish for best results.\u003c\/li\u003e\n\u003cli\u003eKeep total load at or below 5 lb (media plus workpieces combined).\u003c\/li\u003e\n\u003cli\u003eNot designed for flow-through use.\u003c\/li\u003e\n\u003cli\u003eIf steel media is required, select a rotary tumbler or a larger vibratory unit with a curved bowl. Ceramic ball media is a suitable alternative to steel shot in this unit.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Raytech","offers":[{"title":"Default Title","offer_id":43582774477014,"sku":"147.701-KIT230V","price":239.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/tv-5-3-pint-vibratory-tumbler-metals-polishing-kit-230v-otto-frei.jpg?v=1719956861"},{"product_id":"raytech-tv-5-3-pint-vibratory-tumbler-rock-polishing-kit-230v","title":"TV-5 3 Pint Vibratory Tumbler Rock Polishing Kit by Raytech - 230V","description":"\u003cp\u003eThe \u003cstrong\u003eRaytech Tumble-Vibe TV-5 Rock Polishing Kit (230V)\u003c\/strong\u003e is a complete vibratory tumbling solution for polishing rocks, stones, and glass. Designed for simplicity and ease of use, this kit includes the TV-5 vibratory tumbler along with enough media to process 8–15 pounds of stone straight out of the box. The TV-5 features an 8\" diameter bowl with a 3-pint (5 lb maximum) capacity, making it well suited for small batches — including up to 25 rings when used with plastic or ceramic media. The unit stands 9\" tall and is built for 230V power. \u003cstrong\u003eMade in the USA.\u003c\/strong\u003e\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eVibratory tumbling action for polishing rocks, stones, and glass\u003c\/li\u003e\n\u003cli\u003e8\" diameter bowl with 3-pint capacity\u003c\/li\u003e\n\u003cli\u003eHandles up to 5 lbs of rock and media at one time\u003c\/li\u003e\n\u003cli\u003eSuitable for small batches — up to 25 rings with plastic or ceramic media\u003c\/li\u003e\n\u003cli\u003eCompact design at 9\" tall\u003c\/li\u003e\n\u003cli\u003eIncludes four jars of media and an instructional booklet for immediate use\u003c\/li\u003e\n\u003cli\u003eEnough media included to process 8–15 lbs of stone right out of the box\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e230V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBowl Diameter\u003c\/th\u003e\n\u003ctd\u003e8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBowl Capacity\u003c\/th\u003e\n\u003ctd\u003e3 pints\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Load\u003c\/th\u003e\n\u003ctd\u003e5 lbs (rock and media combined)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit Height\u003c\/th\u003e\n\u003ctd\u003e9\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eMade in the USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRaytech Tumble-Vibe TV-5 Vibratory Tumbler (230V)\u003c\/li\u003e\n\u003cli\u003e1 Jar Silicon Carbide 100\/1200 Media\u003c\/li\u003e\n\u003cli\u003e1 Jar Silicon Carbide 700 Media\u003c\/li\u003e\n\u003cli\u003e1 Jar Iolox 50 Media\u003c\/li\u003e\n\u003cli\u003e1 Jar Raybite TL Media\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eThe Art and Science of Mass Finishing\u003c\/em\u003e Booklet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eNotes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBest suited for small batches of rocks, stones, glass, and up to 25 rings when used with plastic or ceramic media.\u003c\/li\u003e\n\u003cli\u003eThe TV-5 is \u003cstrong\u003enot recommended for use with steel shot\u003c\/strong\u003e. For steel shot applications, consider a rotary tumbler or a larger vibratory tumbler with a curved bowl. If steel must be used, observe the 5 lb total capacity limit and consider ceramic ball media as an alternative.\u003c\/li\u003e\n\u003cli\u003eThe TV-5 does \u003cstrong\u003enot\u003c\/strong\u003e support a flow-through system.\u003c\/li\u003e\n\u003cli\u003eThis listing is for the \u003cstrong\u003e230V\u003c\/strong\u003e version. Verify your power supply before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Raytech","offers":[{"title":"Default Title","offer_id":43582774870230,"sku":"147.715-KIT-230","price":179.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/tv-5-3-pint-vibratory-tumbler-rock-polishing-kit-by-raytech-230v-otto-frei.jpg?v=1719956861"},{"product_id":"raytech-tv-5-vibratory-tumbler-3-pint","title":"TV-5 3-Pint Vibratory Tumbler by Raytech","description":"\u003cp\u003eThe Raytech TV-5 is a compact 3-pint vibratory tumbler designed for small-batch finishing work. Ideal for polishing up to 25 rings at a time using plastic or ceramic media, the TV-5 stands just 9\" tall and fits easily on any jeweler's bench. Made in the USA, this is Raytech's smallest vibratory tumbler and is available in both 110V and 230V configurations to suit workshops worldwide.\u003c\/p\u003e\u003cp\u003eThe TV-5 has a total capacity of 5 lbs, including both media and the material being finished. It is not designed for use with a flow-through system, and it is not recommended for use with steel shot. If steel shot is required in your finishing process, consider a rotary tumbler or one of Raytech's larger vibratory tumblers with curved bowls instead. Ceramic ball media is a suitable alternative for those who prefer a harder media without switching equipment.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3-pint bowl capacity — ideal for small batches of up to 25 rings\u003c\/li\u003e\n\u003cli\u003e5 lb total capacity including material and media\u003c\/li\u003e\n\u003cli\u003eCompact design at 9\" tall — fits comfortably on a bench\u003c\/li\u003e\n\u003cli\u003eCompatible with plastic and ceramic media\u003c\/li\u003e\n\u003cli\u003eAvailable in 110V and 230V for domestic and international use\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eNot designed for flow-through systems or steel shot use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity (Volume)\u003c\/th\u003e\n\u003ctd\u003e3 pints\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity (Weight)\u003c\/th\u003e\n\u003ctd\u003e5 lbs total (media + material)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e9\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Media\u003c\/th\u003e\n\u003ctd\u003ePlastic, ceramic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlow-Through Compatible\u003c\/th\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSteel Shot Compatible\u003c\/th\u003e\n\u003ctd\u003eNot recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCountry of Origin\u003c\/th\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eAvailable Options\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e147.701\u003c\/td\u003e\n\u003ctd\u003e110V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e147.701-230V\u003c\/td\u003e\n\u003ctd\u003e230V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eNotes\u003c\/h3\u003e\u003cp\u003eThe TV-5 is not recommended for use with steel shot due to its 5 lb weight capacity. If steel shot media is required, consider a rotary tumbler or a larger Raytech vibratory tumbler with a curved bowl. Ceramic ball media is a practical alternative when harder media is desired with the TV-5.\u003c\/p\u003e","brand":"Raytech","offers":[{"title":"110V","offer_id":43702561865942,"sku":"147.701","price":155.3,"currency_code":"USD","in_stock":false},{"title":"230V","offer_id":43702561898710,"sku":"147.701-230V","price":162.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/tv-5-3-pint-vibratory-tumbler-by-raytech-otto-frei.jpg?v=1719955226"},{"product_id":"burnishing-compound-d-2-steel-shot-concentrated-solution","title":"Burnishing Compound D-2 Concentrated Solution For Steel Shot","description":"\u003cp\u003eD-2 Burnishing Compound is a new and improved concentrated solution formulated for use with steel and stainless steel shot in barrel or vibratory tumbling equipment. Now phosphate-free and biodegradable, this moderate-foaming detergent concentrate is mildly acidic using natural citric acid—making it an effective and environmentally conscious choice for professional finishing operations.\u003c\/p\u003e\u003cp\u003eD-2 delivers excellent color results on copper, brass, gold, silver, and other non-ferrous metals. Its super-concentrated formula means a small amount goes a long way, offering outstanding value for high-volume shop use.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePhosphate-free and biodegradable formula\u003c\/li\u003e\n\u003cli\u003eMildly acidic using natural citric acid\u003c\/li\u003e\n\u003cli\u003eModerate-foaming detergent concentrate\u003c\/li\u003e\n\u003cli\u003eDelivers excellent color on copper, brass, gold, silver, and other non-ferrous metals\u003c\/li\u003e\n\u003cli\u003eCompatible with barrel and vibratory tumbling equipment\u003c\/li\u003e\n\u003cli\u003eSuper-concentrated formula for extended use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eFormula Type\u003c\/th\u003e\n\u003ctd\u003eConcentrated liquid solution\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePhosphate-Free\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBiodegradable\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAcidifying Agent\u003c\/th\u003e\n\u003ctd\u003eNatural citric acid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFoaming Level\u003c\/th\u003e\n\u003ctd\u003eModerate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Shot Types\u003c\/th\u003e\n\u003ctd\u003eSteel and stainless steel shot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDilution Ratio (working solution)\u003c\/th\u003e\n\u003ctd\u003e0.5%–2% solution with water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDilution Ratio (shot storage)\u003c\/th\u003e\n\u003ctd\u003e25–30 oz. of compound per 1 gallon of water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eAvailable Options\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e147.775\u003c\/td\u003e\n\u003ctd\u003e1 Quart (32 oz.)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e147.776\u003c\/td\u003e\n\u003ctd\u003e1 Gallon (128 oz.)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eNotes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFor use as a working burnishing solution, mix 0.5%–2% compound with water.\u003c\/li\u003e\n\u003cli\u003eFor steel shot storage, mix 25–30 oz. of compound per gallon of water to prevent rust and corrosion.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Raytech","offers":[{"title":"1 Quart","offer_id":47551862472918,"sku":"147.775","price":18.95,"currency_code":"USD","in_stock":true},{"title":"1 Gallon","offer_id":47551862440150,"sku":"147.776","price":69.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/burnishing-compound-d-2-concentrated-solution-for-steel-shot-otto-frei.jpg?v=1719954243"},{"product_id":"detergent-compound-b-tumbler-concentrate-plastic-ceramic-porcelain-media","title":"Detergent Compound B Tumbler Concentrated Solution","description":"\u003cp\u003eDetergent Compound B is a super concentrated tumbler solution formulated for use with all plastic, ceramic, and porcelain finishing media. Considered a general-purpose compound, it is the most popular solution for use in rotating, vibratory, and magnetic tumblers. Compatible with all precious metals, white metals, and most finishing medias, Compound B keeps parts and media clean throughout the process cycle.\u003c\/p\u003e\u003cp\u003eIn addition to general cleaning, Compound B provides minor degreasing qualities and moderate corrosion protection for steel and other ferrous metals. Brass and copper alloys remain bright and tarnish-free during processing. It can also be used for finishing aluminum without etching and for finishing copper and brass without darkening or tarnishing. For vibratory deburring of steel and stainless steel, use with ceramic media.\u003c\/p\u003e\u003cp\u003eMix at a 2% solution with water prior to use.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSuper concentrated formula—a little goes a long way\u003c\/li\u003e\n\u003cli\u003eGeneral-purpose solution compatible with plastic, ceramic, and porcelain media\u003c\/li\u003e\n\u003cli\u003eSuitable for use in rotating, vibratory, and magnetic tumblers\u003c\/li\u003e\n\u003cli\u003eCompatible with all precious metals and white metals\u003c\/li\u003e\n\u003cli\u003eKeeps parts and media clean during the full process cycle\u003c\/li\u003e\n\u003cli\u003eProvides minor degreasing and moderate corrosion protection for ferrous metals\u003c\/li\u003e\n\u003cli\u003eKeeps brass and copper alloys bright and tarnish-free during processing\u003c\/li\u003e\n\u003cli\u003eSuitable for finishing aluminum without etching\u003c\/li\u003e\n\u003cli\u003eNot generally recommended for use with steel or stainless steel media finishing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eUsage\u003c\/th\u003e\n\u003ctd\u003eRotating, vibratory, and magnetic tumblers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Media\u003c\/th\u003e\n\u003ctd\u003ePlastic, ceramic, and porcelain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Metals\u003c\/th\u003e\n\u003ctd\u003ePrecious metals, white metals, brass, copper, aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDilution Ratio\u003c\/th\u003e\n\u003ctd\u003e2% solution with water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNot Recommended For\u003c\/th\u003e\n\u003ctd\u003eSteel or stainless steel media finishing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eAvailable Options\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e147.760\u003c\/td\u003e\n\u003ctd\u003e1 Quart (32 oz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e147.761\u003c\/td\u003e\n\u003ctd\u003e1 Gallon (128 oz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Raytech","offers":[{"title":"1 Quart","offer_id":47551863128278,"sku":"147.760","price":27.35,"currency_code":"USD","in_stock":true},{"title":"1 Gallon","offer_id":47551863095510,"sku":"147.761","price":91.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/147.760NEW_thumb_200ada8d-c59b-4fa3-83c6-1743466e7d9f.jpg?v=1744653773"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/collections\/tv-5-3-pint-vibratory-tumbler-rock-polishing-kit-by-raytech-230v-otto-frei.jpg?v=1759161067","url":"https:\/\/www.ottofrei.com\/it\/collections\/raytech-vibratory-tumblers-polishing-media.oembed","provider":"Otto Frei","version":"1.0","type":"link"}