{"product_id":"badeco-8lc100-micro-polishing-filing-handpiece-duplex-spring","title":"Badeco 8LC100 Micro Polishing-Micro Filing Handpiece with Duplex Spring","description":"\u003cp\u003eCorners, recesses and the other tight areas a conventional polishing tool cannot get into are exactly where this reciprocating handpiece works. The \u003cstrong\u003eBadeco 8LC100\u003c\/strong\u003e is a micro-polishing and micro-filing handpiece that accepts ceramic files and miniature files, making it a precise solution for finishing complex jewelry and metalwork surfaces. Part number \u003cstrong\u003e134.748\u003c\/strong\u003e includes the duplex spring; it is also available without a duplex spring as part number \u003cstrong\u003e134.748ND\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe 8LC100 holds tools up to 3.0mm in diameter with a 1.0mm stroke length and runs at 500–7,000 RPM. It measures 106mm (4-1\/4\") in length, weighs just 55 grams, operates at approximately 30 decibels and is completely vibration free. No oiling is ever required. The 8LC100 is engineered for continuous use up to 8 hours a day, 7 days a week, with no user servicing needed.\u003c\/p\u003e\n\u003cp\u003eUse it with Ceramic Files or Glardon-Vallorbe Miniature Files, or adapt your own files and felt points. Ceramic files and Vallorbe miniature files are held in the Universal Tool Holder via a set screw. An additional Universal Tool Holder may be purchased separately (part number \u003cstrong\u003e134.743-UTH\u003c\/strong\u003e), and a special 3.2mm tool holder using two set screws is also available separately (part number \u003cstrong\u003e134.743-320\u003c\/strong\u003e).\u003c\/p\u003e\n\u003cp\u003eThe 8LC100 is imported into the USA by Otto Frei and converted for \"key tip\" USA-type flex shaft use. It carries a \u003cstrong\u003e6-month factory warranty\u003c\/strong\u003e against defects in parts and manufacturing for all components from the duplex spring attachment up. A version for the Badeco Micromotor system is sold as the Badeco 4LC100.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReciprocating action for micro-polishing and micro-filing in hard-to-reach areas\u003c\/li\u003e\n\u003cli\u003eAccepts tools up to 3.0mm in diameter\u003c\/li\u003e\n\u003cli\u003e1.0mm stroke length for precise finishing control\u003c\/li\u003e\n\u003cli\u003eSpeed range of 500–7,000 RPM\u003c\/li\u003e\n\u003cli\u003eVirtually silent operation at approximately 30 decibels\u003c\/li\u003e\n\u003cli\u003eCompletely vibration free during use\u003c\/li\u003e\n\u003cli\u003eNo oiling required, a maintenance-free design\u003c\/li\u003e\n\u003cli\u003eLightweight at 55 grams for reduced hand fatigue\u003c\/li\u003e\n\u003cli\u003eCompatible with Ceramic Files and Glardon-Vallorbe Miniature Files\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFits \"key tip\" USA-type flex shafts through the duplex spring attachment\u003c\/li\u003e\n\u003cli\u003eBest paired with a low-speed, high-torque Foredom flex shaft motor (Series TX or LX)\u003c\/li\u003e\n\u003cli\u003eTakes Ceramic Files, Glardon-Vallorbe Miniature Files, and your own files and felt points\u003c\/li\u003e\n\u003cli\u003eFor a Badeco Micromotor system, use the Badeco 4LC100 instead\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDuplex spring warning:\u003c\/strong\u003e duplex springs and all USA-made duplex spring connection parts carry no warranty. Do not bend the duplex spring beyond 45 degrees during use or when detaching it from the flex shaft. Duplex springs may fail during normal use.\u003c\/li\u003e\n\u003cli\u003eFor extended duplex spring life, run the handpiece on a low-speed, high-torque Foredom flex shaft motor (Series TX or LX). High RPM operation can cause premature duplex spring failure.\u003c\/li\u003e\n\u003cli\u003eReplacement inner duplex springs are available: single piece part number \u003cstrong\u003e134.279\u003c\/strong\u003e (Foredom HP76); pack of 12 part number \u003cstrong\u003e134.280\u003c\/strong\u003e (Foredom HP76B).\u003c\/li\u003e\n\u003cli\u003eParts used for the USA conversion are made in the USA and are not covered by the factory warranty.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Badeco","offers":[{"title":"Default Title","offer_id":43583123194070,"sku":"134.748","price":763.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/badeco-8lc100-micro-polishing-micro-filing-handpiece-with-duplex-spring-otto-frei.jpg?v=1719956743","url":"https:\/\/www.ottofrei.com\/it\/products\/badeco-8lc100-micro-polishing-filing-handpiece-duplex-spring","provider":"Otto Frei","version":"1.0","type":"link"}