Eurotool Hammer Handpiece

A reciprocating hammer handpiece sets pave stones and textures metal at the bench by delivering a controlled hammering stroke instead of a rotary cut. The Eurotool Hammer Handpiece is designed for stone setting and surface texturing, and it attaches to all key tip flex shafts as used on Foredom, Grobet, OttoFlex and EuroTool flex shafts and any other key tip equipment. Key tip flex shafts are the North American standard.

The handpiece is supplied with a hardened tip. Tips use a 4-48 US thread and are fully interchangeable with tips designed for the Swiss-made Badeco hammer handpiece, giving you access to a wide range of compatible accessories. This is the standard version, supplied without a duplex spring.

Impact force is adjustable from light to heavy by rotating the silver knurled adjusting ring, providing control suited to delicate stone setting as well as more aggressive texturing work. The handpiece has a 1/32" stroke.

Important: The Eurotool Hammer Handpiece is not recommended for continuous professional use. Run it at low speed only, 0–5,000 rpm, and in forward rotation only.

Features

• Reciprocating hammering action, not rotary
• Compatible with any key tip type flex shaft, the North American standard
• Supplied with a hardened tip
• Tips are interchangeable with Badeco hammer handpiece tips (4-48 US thread)
• Adjustable impact force via the silver knurled adjusting ring
• 1/32" stroke length
• Suitable for stone setting and surface texturing applications
• Standard build without duplex spring

Compatibility

• Attaches to Foredom, Grobet, OttoFlex, EuroTool and any other key tip type flex shaft
• Accepts tips with a 4-48 US thread, including tips made for the Badeco hammer handpiece
• Pave point (diamond tip) accessory for bright cut stippled effects, part number 153.195
• Carbide Tip (HP10212) for marking or inscribing hardened steel, part number 134.301

Notes

• Requires periodic lubrication with Handpiece Lube, part number 134.343
• Do not exceed 5,000 rpm, and operate in forward rotation only
• Not recommended for continuous professional use
• Pave point (diamond tip) accessory sold separately, part number 153.195
• Carbide Tip (HP10212) for hardened steel marking sold separately, part number 134.301