Foredom H.50C Chisel Handpiece Kit With Six Chisels

Power-assisted carving in wood, plastic, plaster, and soft carving stone asks for a handpiece that delivers the strike so your hand does not have to. The Foredom H.50C Chisel Handpiece Kit answers that with the reciprocating hammer-type H.50 handpiece and a six-piece chisel set. The H.50 needs only light pressure to engage the hammering chisel action, giving carvers greater control and reduced fatigue during extended sessions.

The handpiece attaches to any Foredom or other flex shaft equipped with a standard (USA) key tip shaft. Its profile mirrors the popular H.44T but features its own rugged textured plastic barrel and tapered aluminum tip for a distinctive, durable build.

Optimum performance is reached between 1,000–8,000 RPM. Foredom recommends the 1/3 HP Series TX motor for this handpiece, and the 1/6 HP Series SR motor also drives it in forward rotation only. A benchtop dial speed control lets you set and hold any speed within the recommended range: part number 134.192EMX (Foredom C.EMX-1) for the TX Series, or part number 134.330 (Foredom C.EM-1) for the SR Series.

This kit includes the H.50 handpiece together with a six-piece chisel set, the same chisels sold separately in the Foredom AKHK550 Chisel Kit (Otto Frei part no. 134.296).

Features

• Reciprocating hammer-type action with light-pressure engagement
• Attaches to any Foredom or standard (USA) key tip flex shaft
• Rugged textured plastic barrel with tapered aluminum tip
• Optimum performance range: 1,000–8,000 RPM
• Recommended for use with the 1/3 HP Series TX motor
• Compatible with 1/6 HP Series SR motors in forward rotation only
• Includes a six-piece chisel set for immediate use

Compatibility

• Any Foredom or other flex shaft fitted with a standard (USA) key tip shaft
• 1/3 HP Series TX motor, the recommended pairing
• 1/6 HP Series SR motor, forward rotation only
• Speed control: Foredom C.EMX-1 (Otto Frei part no. 134.192EMX) for TX Series, Foredom C.EM-1 (Otto Frei part no. 134.330) for SR Series

Notes

The kit ships with the H.50 handpiece and the following six chisels:

• A-KC503 Chisel Sweep #3, 9mm
• A-KC504 Chisel Sweep #7, 14mm
• A-KC505 Chisel Sweep #11, 3.5mm
• A-KC506 Chisel V Parting Tool 70°, 5.5mm
• A-KC509 Single Bevel #1, 9mm
• A-KC510 Right Skew Single Bevel #2, 9mm

When running the handpiece on the 1/6 HP Series SR motor, operate in forward rotation only. For consistent speed control, a benchtop dial speed control is strongly recommended: Foredom C.EMX-1 (Otto Frei part no. 134.192EMX) for TX Series motors, or Foredom C.EM-1 (Otto Frei part no. 134.330) for SR Series motors. The included chisels are identical to those sold in the Foredom AKHK550 Chisel Kit (Otto Frei part no. 134.296).