{"product_id":"foredom-k1080-hammer-micromotor-kit","title":"Foredom K.1080 Hammer Micromotor Kit-Ships Free","description":"\u003cp\u003eA reciprocating hammer system for stone setting, channel work, engraving and metal texturing at the bench, driven straight from a control box with no flexible shaft and no air compressor. The Foredom K.1080 pairs the H.MH-110 adjustable hammer handpiece with the HP4-960 variable speed foot control, delivering 0–2,500 strokes per minute, and a knurled impact force ring sets hammer strength from a light touch to full power. The kit runs on switchable dual voltage, 115V at 1.5 amps or 220V\/240V at 0.75 amps.\u003c\/p\u003e\n\u003cp\u003eThe handpiece measures 6-1\/4\" (159 mm) long with a 9\/16\" (14 mm) grip and a 1\" (25 mm) motor diameter, and it weighs 13 oz (369 g). It drives threaded anvil points through an installed HPH8-32 adapter rather than a collet, and the supplied HPH8-214 graver holder turns it into a power engraver. Its bearings are permanently lubricated and maintenance-free, so no oiling is required, and Foredom tests each unit before it ships.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable reciprocating hammer action for precision stone setting, channel work and engraving\u003c\/li\u003e\n\u003cli\u003eKnurled impact force control ring adjusts hammer strength from a light touch to full power\u003c\/li\u003e\n\u003cli\u003eVariable stroke speed, 0–2,500 strokes per minute by control dial\u003c\/li\u003e\n\u003cli\u003eHammer action engages only under light pressure, so the tool can be placed precisely without marking the surface\u003c\/li\u003e\n\u003cli\u003eDual voltage, 110\/120V or 220\/240V, with switchable power input for worldwide use\u003c\/li\u003e\n\u003cli\u003eHP4-960 variable speed foot control for brush type motors\u003c\/li\u003e\n\u003cli\u003ePermanently lubricated, maintenance-free bearings that need no oiling\u003c\/li\u003e\n\u003cli\u003eEach unit tested by Foredom for consistent performance and durability\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eCompatible with the optional Foredom AK101 6-Piece Anvil Point Kit for a wider range of textures and setting applications.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eH.MH-110 Adjustable Reciprocating Hammer Handpiece\u003c\/li\u003e\n\u003cli\u003eHP4-960 Variable Speed Foot Control\u003c\/li\u003e\n\u003cli\u003eAdapter for threaded anvil point, installed (HPH8-32)\u003c\/li\u003e\n\u003cli\u003e3 threaded anvil points (HP10177)\u003c\/li\u003e\n\u003cli\u003eGraver holder (HPH8-214): converts handpiece into a power engraver\u003c\/li\u003e\n\u003cli\u003eHex key (5\/64\") and 2 pins for tightening anvil points\u003c\/li\u003e\n\u003cli\u003eOpen-end wrench (5 mm)\u003c\/li\u003e\n\u003cli\u003eExtra pair of motor brushes (HP4-163)\u003c\/li\u003e\n\u003cli\u003eInstruction manuals for H.MH-110 handpiece and K.1080 kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpact adjustment:\u003c\/strong\u003e Rotate the knurled impact ring to set hammer force, and test on similar metal before working on finished pieces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForward only operation:\u003c\/strong\u003e Always operate in forward mode, because running in reverse can permanently damage the handpiece.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrush maintenance:\u003c\/strong\u003e Replace the carbon brushes when worn below 2 mm, roughly every 200 hours of typical use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverload protection:\u003c\/strong\u003e If the red overload indicator activates, switch off the unit, correct the condition and restart after a brief pause.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngraving use:\u003c\/strong\u003e Install the included graver holder and set stroke speed between 1,000–2,500 strokes per minute for the best control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety:\u003c\/strong\u003e Always wear eye protection, avoid loose clothing or jewelry during operation and never immerse the handpiece in liquid.\u003c\/li\u003e\n\u003cli\u003eThis product is subject to California Proposition 65 warnings.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Foredom","offers":[{"title":"Default Title","offer_id":43581371547862,"sku":"134.542","price":792.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/foredom-k-1080-hammer-micromotor-kit-ships-free-otto-frei.jpg?v=1689354188","url":"https:\/\/www.ottofrei.com\/it\/products\/foredom-k1080-hammer-micromotor-kit","provider":"Otto Frei","version":"1.0","type":"link"}