{"product_id":"foredom-k2252-chisel-carving-kit-hanger-mlx-h50-17-chisels","title":"Foredom K.2252 Chisel Carving Kit with Hanger","description":"\u003cp\u003ePower assisted chisel carving in wood, plastic, plaster and soft carving stone needs a reciprocating handpiece and a motor that holds its torque at low speed. The Foredom K.2252 Chisel Carving Kit with Hanger supplies both as a matched, ready to use system, built around the Series LX (M.LX) permanent magnet motor rated to a maximum of 5,000 RPM and the H.50 reciprocating chisel handpiece, with 17 chisels supplied across three sets.\u003c\/p\u003e\n\u003cp\u003eThe C.EMX tabletop dial speed control runs on 115V and converts AC to the DC current the LX motor requires, which gives the H.50 the constant speed supply it needs. The MAMH-1 motor hanger with bench clamp mounts the motor overhead and keeps the working area clear.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping in the continental USA.\u003c\/strong\u003e If this kit is ordered with non-qualifying items, no shipping is charged on the kit, and standard ground shipping applies to the other items in the order.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eM.LX permanent magnet Series LX flex shaft motor, high torque and low speed, rated to 5,000 RPM\u003c\/li\u003e\n\u003cli\u003eC.EMX tabletop dial speed control in plastic housing, 115V, converting AC to the DC current the LX motor requires\u003c\/li\u003e\n\u003cli\u003eH.50 reciprocating hammer type chisel handpiece with textured plastic barrel and tapered aluminum tip\u003c\/li\u003e\n\u003cli\u003e17 chisels across three sets: AKH550, AKHK560 and AKHK570\u003c\/li\u003e\n\u003cli\u003eMAMH-1 motor hanger with bench clamp for overhead motor mounting\u003c\/li\u003e\n\u003cli\u003eFlex shaft grease and an accessory tray also included\u003c\/li\u003e\n\u003cli\u003eH.50 engages its hammering chisel action under light pressure\u003c\/li\u003e\n\u003cli\u003e5,000 RPM ceiling on the LX motor suits the H.50, which must not be run at high speed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe LX motor works with TXR, SXR and EMX speed controls, which convert AC to DC current\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot compatible with Series SR speed controls.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe H.50 attaches to any Foredom or standard (USA) key tip flex shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe LX motor requires a speed control that converts AC to DC current, which means TXR, SXR or EMX. \u003cstrong\u003eIt will not work with Series SR speed controls.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe H.50 chisel handpiece should not be run at high speed. The 5,000 RPM limit of the LX motor makes it the correct match for this handpiece.\u003c\/li\u003e\n\u003cli\u003eThe H.50 requires a constant speed supply, and the included EMX tabletop dial control is matched to that purpose.\u003c\/li\u003e\n\u003cli\u003eProposition 65 warning: contains Beryllium, Nickel and Lead.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Foredom","offers":[{"title":"Default Title","offer_id":43582655430870,"sku":"134.165HA","price":569.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/foredom-k-2252-chisel-carving-kit-with-hanger-otto-frei.jpg?v=1719956916","url":"https:\/\/www.ottofrei.com\/it\/products\/foredom-k2252-chisel-carving-kit-hanger-mlx-h50-17-chisels","provider":"Otto Frei","version":"1.0","type":"link"}