Acquista di più - Risparmia di più
Risparmia alla grande con gli sconti sui grandi quantitativi
See every deal on the Buy More Save More page →
Description
Un banco da orafo sostiene il lavoro all'altezza della seduta e mantiene gli utensili, i cassetti e i vassoi raccoglioggetti a portata di mano dalla sedia; il Banco da orafo personalizzato Maple John Frei Double Bank (codice n. 013.015) è progettato per questo compito a livello professionale. Maestri ebanisti in California realizzano ogni banco su ordinazione in acero di prima scelta, così il banco viene costruito per il laboratorio che lo ha ordinato anziché essere prelevato dal magazzino.
Il piano in acero massello a blocco da macellaio ha uno spessore di 1-1/2" (38 mm) ed è sostenuto da gambe in legno massello, con fianchi e retro in compensato di qualità da ebanista impiallacciato in rovere o acero e una doppia fila di cassetti sotto la superficie di lavoro. Le dimensioni complessive del banco sono 61-1/2" x 26" x 38" (1562 x 660 x 965 mm). Una finitura naturale a olio Watco valorizza le venature dell'acero e lo protegge; su richiesta sono disponibili finiture personalizzate.
Caratteristiche
- Realizzato a mano in California, USA
- Piano massello in acero a blocco da macellaio, spesso 1-1/2" (38 mm)
- Gambe, modanature, frontali dei cassetti e supporti per le braccia in legno massello
- Fianchi e retro in compensato di qualità da ebanista impiallacciato in rovere o acero
- Finitura naturale a olio Watco, con finiture personalizzate disponibili su richiesta
- Design a doppia fila per un ampio spazio di stoccaggio nei cassetti
- Realizzato su ordinazione, quindi personalizzabile
- Spedito completamente assemblato
Note
Ogni banco viene realizzato secondo le tue specifiche, con modifiche, finiture e configurazioni personalizzate disponibili. La struttura in acero massello consente inoltre di procedere alla rifinitura o a ulteriori personalizzazioni a casa.
I tempi di realizzazione sono di 4–6 settimane. Il banco viene spedito completamente assemblato tramite trasporto su camion, FOB Chico, CA, con il costo dell'imballaggio incluso e le spese di trasporto fatturate separatamente.
L'acero ha una venatura più compatta e fine e un peso leggermente superiore rispetto al rovere. Entrambi i legni sono ideali per realizzare un eccellente banco, quindi la scelta dipende dalle preferenze relative a colore, consistenza e sensazione al tatto.
Per un preventivo di spedizione, contattaci indicando il tuo indirizzo di consegna.
Specifications
- Brand
- Otto Frei
- Part #
- 013.015
- Type
- Banchi da lavoro
- Dimensions
- 64 in x 29 in x 42 in
- Material
- Maple (select-grade)
- Worktop
- Solid butcher block maple
- Worktop Thickness
- 1-1/2" (38 mm)
- Sides and Back
- Oak or maple-veneered plywood
- Legs, Trim, Drawer Faces and Arm Supports
- Solid wood
- Finish
- Natural Watco oil, custom finishes available on request
- Configuration
- Double bank drawer storage
- Assembly
- Ships fully assembled
- Build Time
- 4–6 weeks
- Shipping
- FOB Chico, CA, truck freight only
- Total Pieces
- 4
What's Included
What's Included
Everything in the box, by part number.
| Part # | Description | Qty |
|---|---|---|
| 013.003 | John Frei custom workbench catch trays | 1 |
| 013.015-DMAPLE | Maple double bank workbench | 1 |
| 112.319 | Steel Italian bench block, 100mm x 100mm x 20mm (4" x 4" x 3/4"), with one radiused edge | 1 |
| 013.012 | Crating charge for double bank bench | 1 |
California Prop 65 Warning:Cancer and Reproductive Harm. www.P65warnings.ca.gov.
Reviews · 7
This product has 7 reviews.
Read & write reviews ↓Customers praise this workbench as "the best in the industry" with exceptional durability lasting decades. Features sturdy construction, ergonomic design, and ample drawer storage. Noted as "extremely sturdy" and "very well made." Delivery logistics can be challenging due to 230 lb weight and curb-only service.
Some of the reviews shown are from related products the merchant grouped with this one.
S
Just got it yesterday and it is literally the nicest thing I've ever owned, it is extremely sturdy and ergonomic and just a very well made peice of furniture in general, the huge amount of drawer space is a godsend. I don't think money can buy a nicer bench
C
It costs a pretty penny, but the craftsmanship is incredible. The drawers slide nicely, and every inch of it is nice and smooth. Pretty sure this bench will last me forever.
M
I'd like to see OF put more effort into their delivery service. My delivery was a real hassle. OF uses a standard freight company, with curb delivery (which literally means the curb). The desk itself weighs about 230 lbs, and the crated desk weighs even more. It comes fully assembled, so if you need to move it from the curb to another place, you have difficulty doing by yourself. If you need anything like "white glove" delivery, you'll need to set that up yourself. I did mine thru the delivery company the OF uses and it was super expensive and quite a mess.
G
When I was shopping for a bench 35 years ago I wanted the best I could find because I would be spending most of my life in front of it. Well I have and with the spills and burn marks on it now, I still love it. Yes this is the best and defining quality.
H
I purchased this bench 12 years ago and have never regretted the purchase. Solid high quality construction. With over 20,000 Hours of use and it is still the most comfortable / solid bench in our shop. We special ordered an upgraded version with a white layout bread board and also had them add the GRS bench pin system. I love the formed no seam stainless steel lap catch tray. The solid 2 inch thick maple top shows only minor wear. I would recommend this to anyone who spends considerable time at their bench.
G
I took the plunge and purchased the best bench in the industry. This by far was the one tool I wanted to complete my jewelers wish list. I wonder if Mr. Frei remembers delivering this bench to my house ten or so years ago in Phoenix Arizona (purchased @ the Tucson show). Not by far the most expensive purchase I have made at the tool show but by far the most used and enjoyed.. (Yes I do remember but that was a bit more than 10 years ago...and thanks again! Steve Frei)
C
I purchased this workbench a few years ago and I love it. Very solid construction with quality materials. The drawers are handy for storing my supplies or tools. I don't like the two top locking cabinets that much because the two drawers in each cabinet eat up so much space and only small items can be stored in them, but they are handy. All in all, I am very pleased with my purchase. It will last for many, many years of jewelry making!
B
Is there one available now in stock?
Can you possibly ship it today or tomorrow 6/12/26. 6/13/26
John Frei custom workbenches are made to order. Please allow 4 to 6 weeks for delivery after placing your order.
S
Weight?
Approximately 240 lbs. Shipping weight including crate is 300 lbs
S
Im waiting on mine to be built right now (very exciting!!!) And I'm wondering how heavy it is inside the crate and outside the crate? Will 2 regular strength men be able to bring it inside without problems? And also any tips for moving it?
The double bank benches as crated are right around 300 lbs. Once out of the crate they weigh around 250 lbs. Unless you have a big 4 wheel dolly or a fork lift, best to uncrate your workbench right out of the truck before moving it in inside. Once uncrated it can be lighten up a bit for moving by carefully removing catch trays, tool trays and drawers but that is not necessary. Then with the aid of a quality 2 wheel hand truck/dolly and some packing blankets one strong person can move it. If it needs to be hand carried then you need 2 strong persons. Don't worry too much if in moving it you caused a ding or a scratch. Since the bench is wood it will clean up real nice with a little sandpaper and some TLC.
C
I purchased your bench during COVID, at the time I could customize with the GRS system, but could swing both at the same time. Could you please advise what parts I would need to make the bench pin level adjustable? Also is they a shelf that would hold a heavy ball vise that I already own. Thank you in advance for your help.
The Slide and Lock Workholding Fixture is our number one recommedation. https://www.ottofrei.com/products/grs-004-759-slide-lock-original-tall-workholding-fixture-complete-with-tru-axis 104.759. Also available in a Mini version, 104.758. Orginal solutions are the GRS 104.665 Engraving block shelf with adjustable hanger. Give us a call if you have any more questions or email us at [email protected]