{"title":"Disc Cutters \u0026 Hole Punching","description":"\u003cp\u003eDisc cutters punch clean metal blanks in round, oval, heart, square, star, and other shapes for earrings, pendants, and cold connection work. Choose disc cutter sets from Durston, OMO, and our Value Line, Eurotool screw-down hole punch sets, center positioning dies, and replacement punches for Italian, Pepe, and Swiss made disc cutters in metric and inch sizes.\u003c\/p\u003e","products":[{"product_id":"replacement-punch-italian-disk-cutters-2-3-5mm","title":"Replacement Punch Only For Italian Disk Cutters","description":"\u003cp\u003eKeep your Italian disk cutter set fully operational with these individual replacement punches. Designed to cut perfectly round disks from sheet metal, these punches are sized to fit Italian disk cutter sets and deliver clean, precise results. For best performance, use with a hydraulic press or similar equipment; a mallet may also be used with care.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReplacement punch for use with Italian disk cutters\u003c\/li\u003e\n\u003cli\u003eCuts perfectly round metal disks\u003c\/li\u003e\n\u003cli\u003eBest results achieved with a hydraulic press\u003c\/li\u003e\n\u003cli\u003eCompatible with mallet use when care is taken\u003c\/li\u003e\n\u003cli\u003eAvailable in four sizes to match your cutter set\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAvailable Options\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eCompatible Disk Cutter(s)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e125.142-2\u003c\/td\u003e\n\u003ctd\u003e2mm\u003c\/td\u003e\n\u003ctd\u003e125.142 \u0026amp; 125.138\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e125.142-2.5\u003c\/td\u003e\n\u003ctd\u003e2.5mm\u003c\/td\u003e\n\u003ctd\u003e125.142\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e125.142-3\u003c\/td\u003e\n\u003ctd\u003e3mm\u003c\/td\u003e\n\u003ctd\u003e125.142 \u0026amp; 125.138\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e125.142-3.5\u003c\/td\u003e\n\u003ctd\u003e3.5mm\u003c\/td\u003e\n\u003ctd\u003e125.142\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Otto Frei","offers":[{"title":"2mm","offer_id":47551695356118,"sku":"125.142-2","price":10.0,"currency_code":"USD","in_stock":true},{"title":"2.5mm","offer_id":47551695388886,"sku":"125.142-2.5","price":10.0,"currency_code":"USD","in_stock":true},{"title":"3mm","offer_id":47551695454422,"sku":"125.142-3","price":10.0,"currency_code":"USD","in_stock":true},{"title":"3.5mm","offer_id":47551695421654,"sku":"125.142-3.5","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/replacement-punch-only-for-italian-disk-cutters-otto-frei.jpg?v=1719958929"},{"product_id":"euro-tool-cold-connection-metal-hole-punching-sets","title":"Euro Tool Cold Connection Metal Hole Punching Sets","description":"\u003cp\u003eThese hole punch sets from Euro Tool are designed for making clean, precise cold connections in soft metals. The heat-treated punches use a screw action mechanism that creates accurate holes without deforming the metal, working with soft metals up to 22 gauge in thickness. An adjustable guide plate attaches to the bottom of the punch, allowing you to produce multiple pieces with holes positioned at exactly the same location on each piece—ideal for consistent, repeatable results in production work.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHeat-treated punches for durability and consistent performance\u003c\/li\u003e\n\u003cli\u003eScrew action design creates clean holes without deforming the metal\u003c\/li\u003e\n\u003cli\u003eWorks with soft metals up to 22 gauge in thickness\u003c\/li\u003e\n\u003cli\u003eAdjustable guide plate attaches to the bottom of the punch for repeatable hole placement\u003c\/li\u003e\n\u003cli\u003eIdeal for cold connection jewelry work\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Metal Thickness\u003c\/th\u003e\n\u003ctd\u003eUp to 22 gauge (soft metals)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMechanism\u003c\/th\u003e\n\u003ctd\u003eScrew action\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePunch Construction\u003c\/th\u003e\n\u003ctd\u003eHeat-treated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eAvailable Options\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eSet Type\u003c\/th\u003e\n\u003cth\u003eHole Sizes\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e146.733\u003c\/td\u003e\n\u003ctd\u003eInch Size – 3 Hole Punch Set\u003c\/td\u003e\n\u003ctd\u003e1\/16\" (1.6mm), 3\/32\" (2.4mm), 1\/8\" (3.17mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e146.734\u003c\/td\u003e\n\u003ctd\u003eGauge Size – 4 Hole Punch Set\u003c\/td\u003e\n\u003ctd\u003e18 ga (1.1mm), 16 ga (1.4mm), 14 ga (1.7mm), 12 ga (2.15mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Eurotool","offers":[{"title":"3 Hole Punch","offer_id":43578718617814,"sku":"146.733","price":48.95,"currency_code":"USD","in_stock":true},{"title":"4 Hole Punch","offer_id":43578718650582,"sku":"146.734","price":60.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/euro-tool-cold-connection-metal-hole-punching-sets-otto-frei.jpg?v=1719958824"},{"product_id":"simple-hole-punch","title":"Simple Hole Punch","description":"\u003cp\u003eA precise and easy-to-use two-hole metal punch built for jewelers and metalsmiths working with soft metal and other pliable materials. Made of tempered tool steel, this simple hole punch delivers clean, accurate holes without deforming the surrounding material. Just place the workpiece in the slot, turn the screw, and the hole is punched cleanly through—no hammering required.\u003c\/p\u003e\u003cp\u003eThe punch features two built-in hole sizes—1.60mm (1\/16\") and 2.30mm (3\/32\")—making it a versatile bench tool for adding jump ring holes, pendant bails, rivets, or decorative perforations to sheet metal and soft materials alike.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTwo hole sizes in one tool: 1.60mm (1\/16\") and 2.30mm (3\/32\")\u003c\/li\u003e\n\u003cli\u003eConstructed from tempered tool steel for durability and precision\u003c\/li\u003e\n\u003cli\u003ePunches clean holes without deforming or distorting the surrounding metal\u003c\/li\u003e\n\u003cli\u003eScrew-driven mechanism for controlled, consistent pressure\u003c\/li\u003e\n\u003cli\u003eSuitable for soft metal up to 24 gauge thick\u003c\/li\u003e\n\u003cli\u003eAlso compatible with plastic and other soft materials\u003c\/li\u003e\n\u003cli\u003eSimple slot-and-screw operation—no mallet or press required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eTempered tool steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHole Size 1\u003c\/th\u003e\n\u003ctd\u003e1.60mm (1\/16\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHole Size 2\u003c\/th\u003e\n\u003ctd\u003e2.30mm (3\/32\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Metal Thickness\u003c\/th\u003e\n\u003ctd\u003e24 gauge (soft metal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Materials\u003c\/th\u003e\n\u003ctd\u003eSoft metal, plastic, and other soft materials\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMechanism\u003c\/th\u003e\n\u003ctd\u003eScrew-driven\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Value Line","offers":[{"title":"Default Title","offer_id":43580772024534,"sku":"146.720","price":19.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/simple-hole-punch-otto-frei.jpg?v=1719957994"},{"product_id":"round-disc-cutter-set-5-half-inch-to-1-inch-wood-box","title":"Round Disc Cutter Set of 5-From 1\/2\" to 1\"","description":"\u003cp\u003eThis economical disc cutter set is designed for producing round disks from soft precious metals such as gold or silver up to 20 gauge thick. Copper, brass, and nickel silver can also be cut with care. The set is well made from hardened tool steel with sharp edges and close tolerances, making it a reliable value for jewelers and metalsmiths. It can be disassembled to help remove punches that become stuck in cut metal. Compatible with use alongside a mallet or in a hydraulic press.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSet of 5 disc cutters ranging from 1\/2\" to 1\"\u003c\/li\u003e\n\u003cli\u003eConstructed from hardened tool steel with sharp cutting edges\u003c\/li\u003e\n\u003cli\u003eClose tolerances for consistent, clean disc cuts\u003c\/li\u003e\n\u003cli\u003eDisassembles to aid removal of stuck punches\u003c\/li\u003e\n\u003cli\u003eSuitable for use with a mallet or hydraulic press\u003c\/li\u003e\n\u003cli\u003eCuts soft precious metals up to 20 gauge thick\u003c\/li\u003e\n\u003cli\u003eWorks with gold, silver, copper, brass, and nickel silver\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSet Quantity\u003c\/th\u003e\n\u003ctd\u003e5 cutters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize Range\u003c\/th\u003e\n\u003ctd\u003e1\/2\" – 1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eHardened tool steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Metal Thickness\u003c\/th\u003e\n\u003ctd\u003e20 gauge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Metals\u003c\/th\u003e\n\u003ctd\u003eGold, silver, copper, brass, nickel silver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eIndia\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow to Use a Disc Cutter\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003ePlace the disc cutter on top of a rubber pad for support.\u003c\/li\u003e\n\u003cli\u003eApply a cutting lubricant, such as Stay Sharp, to lubricate the cutting edges of the punch.\u003c\/li\u003e\n\u003cli\u003eUse a suitable mallet — never a nail-driving hammer. A brass mallet is recommended.\u003c\/li\u003e\n\u003cli\u003eAlways support the opposite side of the cutter with a sheet of the same diameter metal you are cutting. This keeps upper and lower parts in alignment and helps minimize material sticking.\u003c\/li\u003e\n\u003cli\u003eDo not exceed the maximum recommended thickness for your disc cutter.\u003c\/li\u003e\n\u003cli\u003eOnly cut soft non-ferrous metals such as brass, copper, silver, and gold.\u003c\/li\u003e\n\u003cli\u003eEnsure cutting edges are facing down before use.\u003c\/li\u003e\n\u003cli\u003eTo prevent rust, keep the disc cutter lubricated between uses and store in a dry location.\u003c\/li\u003e\n\u003cli\u003eUsing a 95 durometer urethane pad is recommended to extend the life of the cutters.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Value Line","offers":[{"title":"Default Title","offer_id":43581226647766,"sku":"125.1734","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/round-disc-cutter-set-of-5-from-12-to-1-otto-frei-1.jpg?v=1719957647"},{"product_id":"italian-disk-cutter-set-17-2mm-18mm","title":"Italian Disk Cutter Set of 17, 2mm to 18mm (3\/32\" to 3\/4\")","description":"\u003cp\u003eThis Italian-made disk cutter set includes 17 punches ranging from 2mm to 18mm (approximately 3\/32\" to 3\/4\"), designed for professional jewelers and metalsmiths who need precise, clean round disks from soft precious and non-ferrous metals. Constructed from specially hardened tool steel with sharp cutting edges and extremely close tolerances, this set delivers consistent, accurate results across a wide range of disk sizes.\u003c\/p\u003e\n\u003cp\u003eThe set is designed for use with a mallet or hydraulic press and is suitable for cutting soft precious metals such as gold and silver up to 18 gauge thick. Copper and brass may also be cut with appropriate care. The cutter can be disassembled to help free any punches that become lodged in the cut material. Made in Italy.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e17-piece punch set covering 2mm through 18mm in 1mm increments\u003c\/li\u003e\n\u003cli\u003eConstructed from specially hardened tool steel\u003c\/li\u003e\n\u003cli\u003eSharp cutting edges with extremely close tolerances\u003c\/li\u003e\n\u003cli\u003eDisassembles for easy removal of stuck punches\u003c\/li\u003e\n\u003cli\u003eCompatible with mallet use or hydraulic press\u003c\/li\u003e\n\u003cli\u003eRound block with 6-1\/8\" diameter\u003c\/li\u003e\n\u003cli\u003eMade in Italy\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow to Use a Disk Cutter\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003ePlace the disk cutter on top of a rubber pad for support.\u003c\/li\u003e\n\u003cli\u003eApply a cutting lubricant, such as Stay Sharp, to the cutting edges of the punch.\u003c\/li\u003e\n\u003cli\u003eUse a suitable mallet—never a nail-driving hammer. Brass mallets are recommended.\u003c\/li\u003e\n\u003cli\u003eSupport the opposite side of the cutter with a sheet of the same diameter metal being cut to maintain alignment and minimize sticking.\u003c\/li\u003e\n\u003cli\u003eDo not exceed the maximum recommended material thickness for this disk cutter.\u003c\/li\u003e\n\u003cli\u003eOnly cut soft, non-ferrous metals such as brass, copper, silver, and gold.\u003c\/li\u003e\n\u003cli\u003eEnsure cutting edges are facing down before striking.\u003c\/li\u003e\n\u003cli\u003eTo prevent rust, lubricate the disk cutter between uses and store in a dry location.\u003c\/li\u003e\n\u003cli\u003eUse with a 95 durometer urethane pad to help extend the life of the cutters.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePunch Count\u003c\/th\u003e\n\u003ctd\u003e17 punches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePunch Range\u003c\/th\u003e\n\u003ctd\u003e2mm – 18mm (approximately 3\/32\" – 3\/4\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePunch Sizes\u003c\/th\u003e\n\u003ctd\u003e2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlock Diameter\u003c\/th\u003e\n\u003ctd\u003e6-1\/8\" round\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Metal Thickness\u003c\/th\u003e\n\u003ctd\u003e18 gauge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Metals\u003c\/th\u003e\n\u003ctd\u003eGold, silver, copper, brass (soft non-ferrous metals only)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSpecially hardened tool steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCountry of Origin\u003c\/th\u003e\n\u003ctd\u003eItaly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e17 hardened tool steel punches (2mm – 18mm)\u003c\/li\u003e\n\u003cli\u003e1 round cutting block (6-1\/8\" diameter)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OMO","offers":[{"title":"Default Title","offer_id":43581285531862,"sku":"125.138","price":535.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/italian-disk-cutter-set-of-17-2mm-to-18mm-332-to-34-otto-frei.jpg?v=1719957625"},{"product_id":"disk-cutter-set-1-1-4-1-1-2-hardened-steel-wood-box","title":"Extra Large Disk Cutter Set of 2, 1-1\/4\" \u0026 1-1\/2\"","description":"\u003cp\u003eThis extra-large \u003cstrong\u003edisk cutter set\u003c\/strong\u003e is built for clean, repeatable cuts in soft non-ferrous sheet metal. With precision-ground edges and tight tolerances, it excels in a hydraulic press for producing round blanks at 1-1\/4\" and 1-1\/2\" diameters. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwo oversized punches for large discs: \u003cstrong\u003e1-1\/4\" (31.75 mm)\u003c\/strong\u003e and \u003cstrong\u003e1-1\/2\" (38.1 mm)\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eSharp, hardened tool steel cutting edges with close alignment\u003c\/li\u003e\n\u003cli\u003eWorks best in a \u003cstrong\u003ehydraulic press\u003c\/strong\u003e; also suitable with proper mallet technique\u003c\/li\u003e\n\u003cli\u003eCutter body can be disassembled to clear stuck material\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSet Type\u003c\/th\u003e\n\u003ctd\u003eDisk cutter with 2 punches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePunch Diameters\u003c\/th\u003e\n\u003ctd\u003e1-1\/4\" (31.75 mm), 1-1\/2\" (38.1 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSpecially hardened tool steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended Sheet Metals\u003c\/th\u003e\n\u003ctd\u003eCopper, brass, silver, gold; nickel silver with thinner stock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax Sheet Thickness\u003c\/th\u003e\n\u003ctd\u003eUp to 18 gauge non-ferrous (hydraulic press)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended Use\u003c\/th\u003e\n\u003ctd\u003eHydraulic press\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eItem\u003c\/th\u003e\n\u003cth\u003eQty\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisk cutter body\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePunch — 1-1\/4\" (31.75 mm)\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePunch — 1-1\/2\" (38.1 mm)\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePlace the cutter on a rubber or urethane support pad and lubricate the cutting edge before use.\u003c\/li\u003e\n\u003cli\u003eSupport the opposite side of the cutter with a same-thickness sheet to maintain alignment and reduce sticking.\u003c\/li\u003e\n\u003cli\u003eA \u003cstrong\u003e95 durometer urethane pad\u003c\/strong\u003e under the cutter can extend tool life.\u003c\/li\u003e\n\u003cli\u003eDo not strike with a nail-driving hammer — use only a suitable \u003cem\u003enon-marring mallet\u003c\/em\u003e if not using a press.\u003c\/li\u003e\n\u003cli\u003eIf a punch sticks, disassemble the tool to remove it safely — do not pry against the cutting edges.\u003c\/li\u003e\n\u003cli\u003eKeep cutting edges lightly oiled between uses and store in a dry location to prevent rust.\u003c\/li\u003e\n\u003cli\u003eDo not exceed the recommended maximum sheet thickness; cut only soft non-ferrous metals.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Value Line","offers":[{"title":"Default Title","offer_id":43581290741974,"sku":"125.1762","price":85.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/extra-large-disk-cutter-set-of-2-1-14-and-1-12-otto-frei-1.jpg?v=1719957620"},{"product_id":"italian-disc-cutter-set-18-punches-2mm-12mm","title":"Italian Disc Cutter Set of 18, 2mm to 12mm (3\/32\" to 1\/2\")","description":"\u003cp\u003eThis Italian-made metric disc cutter set is engineered for professional jewelers who demand precision and consistency. The set includes 18 hardened tool steel punches spanning 2.0mm to 12.0mm (approximately 3\/32\" to 1\/2\"), delivering perfectly round disks from soft precious and non-ferrous metals. Punches are manufactured to extremely close tolerances, featuring sharp straight cutting edges and a nail-type striking head for reliable, clean cuts every time.\u003c\/p\u003e\n\n\u003cp\u003eRecommended for cutting gold, silver, copper, brass, and thin sheets of nickel silver up to 18 gauge. The block is designed to be disassembled, making it easy to free any punch that becomes stuck in cut metal. For best results, use with a hydraulic press; a brass mallet on a rubber pad also works with care. Note that the smallest punches are most susceptible to breakage — handle with care, as individual punches are not guaranteed. Replacement punches are sold separately.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e18 hardened tool steel punches ranging from 2.0mm to 12.0mm\u003c\/li\u003e\n\u003cli\u003ePunches manufactured to extremely close tolerances with sharp straight cutting edges\u003c\/li\u003e\n\u003cli\u003eNail-type striking head design for consistent mallet or press use\u003c\/li\u003e\n\u003cli\u003eDisassembles for easy punch removal when metal becomes stuck\u003c\/li\u003e\n\u003cli\u003eMetric calibrated sizing for precise, repeatable results\u003c\/li\u003e\n\u003cli\u003eRecommended for gold, silver, copper, brass, and thin nickel silver up to 18 gauge\u003c\/li\u003e\n\u003cli\u003eItalian made for professional jeweler quality\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePunch Count\u003c\/th\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePunch Size Range\u003c\/th\u003e\n\u003ctd\u003e2.0mm – 12.0mm (approx. 3\/32\" – 1\/2\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePunch Sizes\u003c\/th\u003e\n\u003ctd\u003e2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 10.0, 11.0, 12.0mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePunch Material\u003c\/th\u003e\n\u003ctd\u003eHardened tool steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Metal Thickness\u003c\/th\u003e\n\u003ctd\u003e18 gauge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended Metals\u003c\/th\u003e\n\u003ctd\u003eGold, silver, copper, brass, thin nickel silver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlock Diameter\u003c\/th\u003e\n\u003ctd\u003e105mm (4-1\/8\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall Height (with punches)\u003c\/th\u003e\n\u003ctd\u003e72mm (2-3\/8\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIndividual Punch Length\u003c\/th\u003e\n\u003ctd\u003e71mm – 72mm (approx. 2-3\/4\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eItaly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFor best results, use with a hydraulic press. A brass mallet on a rubber pad is also suitable with care.\u003c\/li\u003e\n\u003cli\u003eAlways use a cutting lubricant such as Stay Sharp on punch cutting edges before use.\u003c\/li\u003e\n\u003cli\u003eSupport the opposite side of the cutter with a sheet of same-diameter metal to maintain alignment and minimize sticking.\u003c\/li\u003e\n\u003cli\u003ePlace the disc cutter on a rubber pad for support during use. A 95 durometer urethane pad is recommended to extend cutter life.\u003c\/li\u003e\n\u003cli\u003eNever use a nail-driving hammer — use only a suitable brass mallet or press.\u003c\/li\u003e\n\u003cli\u003eKeep cutting edges oriented downward during use.\u003c\/li\u003e\n\u003cli\u003eTo prevent rust, lubricate the disc cutter between uses and store in a dry location.\u003c\/li\u003e\n\u003cli\u003eThe smallest punches are the most fragile — handle with care. Individual punches are not guaranteed and are sold separately as replacements.\u003c\/li\u003e\n\u003cli\u003eOnly cut soft non-ferrous metals. Do not exceed the 18 gauge maximum thickness recommendation.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OMO","offers":[{"title":"Default Title","offer_id":43581366796502,"sku":"125.142","price":295.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/italian-disc-cutter-set-of-18-2mm-to-12mm-332-to-12-otto-frei.jpg?v=1719957577"},{"product_id":"disc-cutter-set-10-piece-1-8-to-1-1-4-inch","title":"Disc Cutter Set of 10-1\/8\" to 1-1\/4\"","description":"\u003cp\u003eCut perfect round metal discs in ten standard sizes with this hardened tool steel disc cutter set. Designed for professional jewelers and metalsmiths, this set punches clean discs from soft precious metals — including gold, silver, and copper — up to 20 gauge thick. Brass, copper, and nickel silver can also be cut with appropriate care. The cutter works with a mallet or in a hydraulic press (the pad is not required when using a hydraulic press). The set measures 5-1\/2\" round by 3\" high and is made in India from hardened tool steel with sharp edges and close tolerances.\u003c\/p\u003e\n\u003cp\u003eA \u003cstrong\u003eknob-style separating device\u003c\/strong\u003e is built into this set, allowing you to quickly separate the upper section from the lower section to free punches that become stuck in the cut metal — a practical feature that speeds up production and reduces frustration at the bench.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCuts ten standard disc sizes from 1\/8\" to 1-1\/4\" (3.1mm – 31.7mm)\u003c\/li\u003e\n\u003cli\u003eHardened tool steel construction with sharp cutting edges and close tolerances\u003c\/li\u003e\n\u003cli\u003eKnob-style separating device for quick release of stuck punches\u003c\/li\u003e\n\u003cli\u003eCompatible with mallet use or hydraulic press\u003c\/li\u003e\n\u003cli\u003eSuitable for gold, silver, copper, brass, and nickel silver up to 20 gauge thick\u003c\/li\u003e\n\u003cli\u003eMade in India\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eDisc Sizes Included\u003c\/th\u003e\n\u003ctd\u003e1\/8\", 1\/4\", 3\/8\", 1\/2\", 5\/8\", 3\/4\", 7\/8\", 1\", 1-1\/8\", 1-1\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMetric Size Range\u003c\/th\u003e\n\u003ctd\u003e3.1mm – 31.7mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNumber of Punches\u003c\/th\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Metal Thickness\u003c\/th\u003e\n\u003ctd\u003e20 gauge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Metals\u003c\/th\u003e\n\u003ctd\u003eGold, silver, copper, brass, nickel silver (non-ferrous only)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeparating Device\u003c\/th\u003e\n\u003ctd\u003eKnob style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall Dimensions\u003c\/th\u003e\n\u003ctd\u003e5-1\/2\" round x 3\" high\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eHardened tool steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCountry of Origin\u003c\/th\u003e\n\u003ctd\u003eIndia\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAlways use a cutting lubricant (such as Stay Sharp) on the cutting edges before use.\u003c\/li\u003e\n\u003cli\u003eUse a suitable mallet — a brass mallet is recommended. Never use a nail-driving hammer.\u003c\/li\u003e\n\u003cli\u003eAlways support the opposite side of the cutter with a sheet of the same diameter metal being cut. This keeps upper and lower sections in alignment and helps prevent material from sticking.\u003c\/li\u003e\n\u003cli\u003eDo not exceed the 20-gauge maximum thickness recommendation.\u003c\/li\u003e\n\u003cli\u003eOnly cut soft, non-ferrous metals. Do not attempt to cut ferrous metals.\u003c\/li\u003e\n\u003cli\u003eEnsure cutting edges are facing down before striking.\u003c\/li\u003e\n\u003cli\u003eTo prevent rust, lubricate the cutter between uses and store in a dry location.\u003c\/li\u003e\n\u003cli\u003eThe pad is not required when using a hydraulic press.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Value Line","offers":[{"title":"Default Title","offer_id":43582130815190,"sku":"125.1790","price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/125.1790NEW_thumb_e8c61fb9-8acb-450a-8f53-dc78076869ec.jpg?v=1750182643"},{"product_id":"v-line-center-positioning-die-set-10-piece-18-to-1-14","title":"Center Positioning Dies For Disc Cutters-Set of Ten-1\/8\" to 1-1\/4\"","description":"\u003cp\u003eThis set of 10 steel center positioning dies is designed to help jewelers and metalsmiths cut perfectly centered washers and ring blanks from metal discs. When punching a washer, achieving a truly centered inner hole is the critical challenge — these dies solve that problem precisely and repeatably.\u003c\/p\u003e\n\u003cp\u003eThe set is made to fit the V-Line disc cutters \u003cstrong\u003e125.1745\u003c\/strong\u003e and \u003cstrong\u003e125.1790\u003c\/strong\u003e, matching up perfectly with all the holes in both cutters. The dies will also work with other round disc cutting sets that have similar hole sizes, though a match with every hole in third-party sets is not guaranteed. Sizes range from \u003cstrong\u003e1\/8\" (3mm) to 1-1\/4\" (31.7mm)\u003c\/strong\u003e, covering the full range of both compatible V-Line cutters.\u003c\/p\u003e\n\u003cp\u003eTo use: punch a hole in your metal sheet sized to your desired inner diameter. Place the cut disc under the punch hole corresponding to your desired outer diameter. Insert the matching centering die for that hole to precisely center the disc. Clamp the disc between the upper and lower halves of the disc cutter using the Pepetools clamping device. Remove the centering die, insert the correct cutting die, and punch — the result is a washer with a perfectly centered hole every time.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSet of 10 steel centering dies ranging from 1\/8\" to 1-1\/4\"\u003c\/li\u003e\n\u003cli\u003eDesigned to match all hole sizes in V-Line disc cutters 125.1745 and 125.1790\u003c\/li\u003e\n\u003cli\u003eCompatible with other round disc cutting sets with similar hole sizes\u003c\/li\u003e\n\u003cli\u003eEnables production of perfectly centered washers and ring blanks\u003c\/li\u003e\n\u003cli\u003eWorks in conjunction with the Pepetools clamping device for secure disc alignment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQuantity\u003c\/th\u003e\n\u003ctd\u003eSet of 10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize Range\u003c\/th\u003e\n\u003ctd\u003e1\/8\" – 1-1\/4\" (3mm – 31.7mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Disc Cutters\u003c\/th\u003e\n\u003ctd\u003eV-Line 125.1745 and 125.1790\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCountry of Origin\u003c\/th\u003e\n\u003ctd\u003eIndia\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne each of the following steel centering dies:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1\/8\" (3mm)\u003c\/li\u003e\n\u003cli\u003e1\/4\" (6.3mm)\u003c\/li\u003e\n\u003cli\u003e3\/8\" (9.4mm)\u003c\/li\u003e\n\u003cli\u003e1\/2\" (12.6mm)\u003c\/li\u003e\n\u003cli\u003e5\/8\" (15.8mm)\u003c\/li\u003e\n\u003cli\u003e3\/4\" (18.9mm)\u003c\/li\u003e\n\u003cli\u003e7\/8\" (22.1mm)\u003c\/li\u003e\n\u003cli\u003e1\" (25.3mm)\u003c\/li\u003e\n\u003cli\u003e1-1\/8\" (28.5mm)\u003c\/li\u003e\n\u003cli\u003e1-1\/4\" (31.7mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eThese centering dies are designed to match all holes in the \u003cstrong\u003eV-Line disc cutters 125.1745 and 125.1790\u003c\/strong\u003e. They will also function with other round disc cutting sets that have similar hole sizes; however, a complete hole-for-hole match with non-V-Line sets is not guaranteed. Use of the \u003cstrong\u003ePepetools clamping device\u003c\/strong\u003e is required as part of the centering process.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eWhen using these dies with disc cutting sets other than the V-Line 125.1745 and 125.1790, some hole sizes in the third-party set may not have a corresponding centering die in this set.\u003c\/p\u003e","brand":"Value Line","offers":[{"title":"Default Title","offer_id":43582131536086,"sku":"125.1792","price":39.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/center-positioning-dies-for-disc-cutters-set-of-ten-18-to-1-14-otto-frei.jpg?v=1719957237"},{"product_id":"durston-disc-cutter-set-3-32mm","title":"Durston Disc Cutter-Set of 10 Punches in Metric Calibrated Sizes Range: 3mm to 32mm","description":"\u003cp\u003eThis metric disc cutter set provides ten precision-ground round punches for clean, repeatable discs from small accents to larger blanks. Angled shear-style cutting edges help the punches bite smoothly into the metal so each strike feels efficient and controlled.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDisc cutter set with 10 round punches in metric-calibrated sizes for consistent, repeatable results.\u003c\/li\u003e\n\u003cli\u003eAngled shear-style cutting edges on each punch for more effective cutting action and cleaner edges.\u003c\/li\u003e\n\u003cli\u003eDesigned for use with rawhide or brass mallets, or in a hydraulic press for longest tool life.\u003c\/li\u003e\n\u003cli\u003eRecommended for non-ferrous jewelry metals commonly used at the bench.\u003c\/li\u003e\n\u003cli\u003eIncludes accessories to support accurate punching and basic maintenance of the cutting edges.\u003c\/li\u003e\n\u003cli\u003eDurable construction engineered specifically for professional jewelry and metalsmithing work.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePunch Count\u003c\/td\u003e\n\u003ctd\u003e10 round punches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePunch Size Range\u003c\/td\u003e\n\u003ctd\u003e3–32 mm (approx. 1\/8\"–1-1\/4\")*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIndividual Punch Sizes\u003c\/td\u003e\n\u003ctd\u003e3, 6, 9, 13, 16, 19, 22, 25, 28, 32 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended Maximum Thickness (hammer use)\u003c\/td\u003e\n\u003ctd\u003eUp to 18 gauge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended Maximum Thickness (hydraulic press)\u003c\/td\u003e\n\u003ctd\u003eUp to 8 gauge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended Hammers\u003c\/td\u003e\n\u003ctd\u003e1–2 lb brass mallets or rawhide mallets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting Edge Style\u003c\/td\u003e\n\u003ctd\u003eAngled shear-style cutting edges\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eDurston\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e*Inch sizes are approximate equivalents to the metric punch diameters.\u003c\/p\u003e\n\u003ch3\u003eAvailable Options\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eSet\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003eDisc cutter body with 10 punches (3–32 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eItem\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003cth\u003eQty\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisc cutter body\u003c\/td\u003e\n\u003ctd\u003eMetric disc cutter block for round punches\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRound punches\u003c\/td\u003e\n\u003ctd\u003e3–32 mm round punches (3, 6, 9, 13, 16, 19, 22, 25, 28, 32 mm)\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStamping pad\u003c\/td\u003e\n\u003ctd\u003eCustom pad to support the cutter during use\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShims\u003c\/td\u003e\n\u003ctd\u003eShims to support material and maintain alignment\u003c\/td\u003e\n\u003ctd\u003eSet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting lubricant\u003c\/td\u003e\n\u003ctd\u003eLubricant for punch cutting edges\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHex key\u003c\/td\u003e\n\u003ctd\u003eHex key for adjustments and maintenance\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMetals\u003c\/td\u003e\n\u003ctd\u003eNon-ferrous jewelry metals: copper, silver, gold, brass, nickel silver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot Intended For\u003c\/td\u003e\n\u003ctd\u003eFerrous steels or hardened alloys\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended Base\u003c\/td\u003e\n\u003ctd\u003eRubber or urethane pad (such as 95 durometer urethane) under the cutter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eFor best performance, place the disc cutter on a rubber or urethane pad, lubricate the punch edges lightly, and strike with a suitable brass or rawhide mallet rather than a nail-driving hammer. Always support the opposite side of the cutter with a similar sheet of metal to help keep the upper and lower plates aligned and to reduce sticking.\u003c\/p\u003e\n\u003cp\u003eDo not exceed the recommended metal thickness, and store the cutter lightly lubricated in a dry location to help prevent rust and extend tool life.\u003c\/p\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":43582131994838,"sku":"125.1769","price":366.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-disc-cutter-set-of-10-punches-in-metric-calibrated-sizes-range-3mm-to-32mm-otto-frei.jpg?v=1719957237"},{"product_id":"heart-shaped-disc-cutter-set-4-piece-wood-box","title":"Heart Shaped Set of 4 Disc Cutters in Wood Box","description":"\u003cp\u003eStop sawing hearts — just punch them out. This set of 4 heart-shaped disc cutters gives jewelers and metalsmiths a fast, precise way to cut heart forms from soft non-ferrous metals including gold, silver, copper, brass, and nickel silver up to 20 gauge thick. Each cutter is manufactured from properly hardened tool steel with sharp cutting edges individually fitted to matching holes at extremely close tolerances, ensuring clean, consistent results every time. The set arrives in a wood storage box with round holes sized to hold the heart-shaped cutters securely. Made in India.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSet of 4 heart-shaped disc cutters in four sizes\u003c\/li\u003e\n\u003cli\u003eManufactured from properly hardened tool steel\u003c\/li\u003e\n\u003cli\u003eSharp cutting edges individually fitted to matching holes with extremely close tolerances\u003c\/li\u003e\n\u003cli\u003eCuts soft non-ferrous metals including gold, silver, copper, brass, and nickel silver\u003c\/li\u003e\n\u003cli\u003eCompatible with use by mallet or hydraulic press\u003c\/li\u003e\n\u003cli\u003eIncludes wood storage box with fitted holes for the heart-shaped cutters\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eCutter Shapes\u003c\/th\u003e\n\u003ctd\u003eHeart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNumber of Cutters\u003c\/th\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Metal Thickness\u003c\/th\u003e\n\u003ctd\u003e20 gauge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Metals\u003c\/th\u003e\n\u003ctd\u003eGold, silver, copper, brass, nickel silver (non-ferrous only)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTool Material\u003c\/th\u003e\n\u003ctd\u003eHardened tool steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage\u003c\/th\u003e\n\u003ctd\u003eWood box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCountry of Origin\u003c\/th\u003e\n\u003ctd\u003eIndia\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSizes Included\u003c\/th\u003e\n\u003ctd\u003e11 mm × 11 mm (1\/2\"), 16 mm × 16 mm (5\/8\"), 22 mm × 22 mm (7\/8\"), 25 mm × 25 mm (1\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse on top of a rubber pad for support.\u003c\/li\u003e\n\u003cli\u003eApply a cutting lubricant such as Stay Sharp to the cutting edges before use.\u003c\/li\u003e\n\u003cli\u003eUse a suitable mallet — a brass mallet is recommended. Never use a nail-driving hammer.\u003c\/li\u003e\n\u003cli\u003eSupport the opposite side of the cutter with a sheet of the same diameter metal being cut to maintain alignment and minimize material sticking.\u003c\/li\u003e\n\u003cli\u003eDo not exceed the 20-gauge maximum thickness recommendation.\u003c\/li\u003e\n\u003cli\u003eOnly cut soft non-ferrous metals. Do not use on ferrous metals.\u003c\/li\u003e\n\u003cli\u003eEnsure cutting edges are facing down before striking.\u003c\/li\u003e\n\u003cli\u003eTo prevent rust, keep cutters lubricated between uses and store in a dry location.\u003c\/li\u003e\n\u003cli\u003eUse with a 95 durometer urethane pad to extend cutter life.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Value Line","offers":[{"title":"Default Title","offer_id":43582256349398,"sku":"125.1759","price":175.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/heart-shaped-set-of-4-disc-cutters-in-wood-box-otto-frei.jpg?v=1719957154"},{"product_id":"star-shaped-disc-cutter-set-5-piece-12-23mm-wood-box","title":"Star Shaped Set of 5 Disc Cutters in Wood Box","description":"\u003cp\u003eStop sawing stars — just punch them out. This set of five star-shaped disc cutters lets you quickly and cleanly cut precise star shapes from soft non-ferrous sheet metal, eliminating tedious sawing and filing. Each cutter is individually fitted to its matching hole with extremely close tolerances, ensuring clean, accurate cuts every time. The set arrives in a wood storage box with round holes sized to hold each star-shaped cutter securely.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSet of five star-shaped disc cutters in five sizes\u003c\/li\u003e\n\u003cli\u003eManufactured from properly hardened tool steel for durability and edge retention\u003c\/li\u003e\n\u003cli\u003eCutting edges are extremely sharp with close-tolerance individual fitting to matching holes\u003c\/li\u003e\n\u003cli\u003eCompatible with use via mallet or hydraulic press\u003c\/li\u003e\n\u003cli\u003eIncludes a wood storage box with fitted round holes for each cutter\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003e125.1758\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSet Contents\u003c\/th\u003e\n\u003ctd\u003e5 star-shaped disc cutters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSizes Included\u003c\/th\u003e\n\u003ctd\u003e12x12mm, 15x15mm, 18x18mm, 20x20mm, 23x23mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Metal Thickness\u003c\/th\u003e\n\u003ctd\u003e20 gauge (soft precious metals)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Metals\u003c\/th\u003e\n\u003ctd\u003eGold, silver, copper, brass, nickel silver (non-ferrous only)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTool Steel\u003c\/th\u003e\n\u003ctd\u003eProperly hardened\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage\u003c\/th\u003e\n\u003ctd\u003eIncluded wood box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCountry of Origin\u003c\/th\u003e\n\u003ctd\u003eIndia\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e5 star-shaped disc cutters (12x12mm, 15x15mm, 18x18mm, 20x20mm, 23x23mm)\u003c\/li\u003e\n\u003cli\u003eWood storage box\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow to use a disc cutter:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003ePlace the disc cutter on top of a rubber pad for support.\u003c\/li\u003e\n\u003cli\u003eApply a cutting lubricant, such as Stay Sharp, to the cutting edges of the punch.\u003c\/li\u003e\n\u003cli\u003eStrike with a suitable mallet only — never a nail-driving hammer. Brass mallets are recommended.\u003c\/li\u003e\n\u003cli\u003eAlways support the opposite side of the cutter with a sheet of the same diameter metal being cut. This keeps the upper and lower parts in alignment and minimizes material sticking.\u003c\/li\u003e\n\u003cli\u003eDo not exceed the maximum recommended metal thickness for the cutter.\u003c\/li\u003e\n\u003cli\u003eOnly cut soft non-ferrous metals such as brass, copper, silver, and gold.\u003c\/li\u003e\n\u003cli\u003eEnsure cutting edges are facing down before striking.\u003c\/li\u003e\n\u003cli\u003eTo prevent rust, keep the disc cutter lubricated between uses and store in a dry location.\u003c\/li\u003e\n\u003cli\u003eUse with a 95 durometer urethane pad to extend cutter life.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Value Line","offers":[{"title":"Default Title","offer_id":43582256873686,"sku":"125.1758","price":185.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/125.1758NEW_thumb_49301f4b-21f9-4edb-b1c8-462684e840a7.jpg?v=1783983413"},{"product_id":"square-disc-cutter-set-3-10-27mm-wood-box","title":"Square Shaped Set of 3 Disc Cutters in Wood Box","description":"\u003cp\u003eCut precise square shapes from soft non-ferrous metals with this set of three hardened tool steel disc cutters, presented in a fitted wood storage box. Designed for gold, silver, copper, brass, and nickel silver up to 20 gauge thick, each cutter is individually fitted to its matching hole with extremely close tolerances for clean, accurate cuts. The set includes three square sizes — 10×10mm, 15×15mm, and 27×27mm — covering a practical range for jewelry blanks, decorative elements, and metalsmithing projects. Compatible with a mallet or hydraulic press. Made in India.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSet of three square-shaped cutters: 10×10mm, 15×15mm and 27×27mm\u003c\/li\u003e\n\u003cli\u003eConstructed from properly hardened tool steel with very sharp cutting edges\u003c\/li\u003e\n\u003cli\u003eEach cutter individually fitted to its matching hole with extremely close tolerances\u003c\/li\u003e\n\u003cli\u003eCuts soft non-ferrous metals including gold, silver, copper, brass, and nickel silver\u003c\/li\u003e\n\u003cli\u003eSuitable for use with a mallet or hydraulic press\u003c\/li\u003e\n\u003cli\u003eIncludes fitted wood storage box (note: box features round holes sized for the square cutters)\u003c\/li\u003e\n\u003cli\u003eMade in India\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003e125.1756\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCutter Shape\u003c\/th\u003e\n\u003ctd\u003eSquare\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncluded Sizes\u003c\/th\u003e\n\u003ctd\u003e10×10mm, 15×15mm, 27×27mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Material Thickness\u003c\/th\u003e\n\u003ctd\u003e20 gauge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Metals\u003c\/th\u003e\n\u003ctd\u003eGold, silver, copper, brass, nickel silver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eHardened tool steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage\u003c\/th\u003e\n\u003ctd\u003eWood box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eIndia\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQuantity\u003c\/th\u003e\n\u003ctd\u003eSet of 3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3 square disc cutters (10×10mm, 15×15mm, 27×27mm)\u003c\/li\u003e\n\u003cli\u003eFitted wood storage box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow to use a disc cutter:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003ePlace the disc cutter on top of a rubber pad for support.\u003c\/li\u003e\n\u003cli\u003eApply a cutting lubricant, such as Stay Sharp, to lubricate the cutting edges of the punch.\u003c\/li\u003e\n\u003cli\u003eUse a suitable mallet — never a nail-driving hammer. A brass mallet is recommended.\u003c\/li\u003e\n\u003cli\u003eAlways support the opposite side of the cutter with a sheet of the same diameter metal being cut. This keeps the upper and lower parts in alignment and helps minimize material sticking.\u003c\/li\u003e\n\u003cli\u003eDo not exceed the maximum recommended thickness (20 gauge) for these cutters.\u003c\/li\u003e\n\u003cli\u003eOnly cut soft non-ferrous metals such as brass, copper, silver, and gold.\u003c\/li\u003e\n\u003cli\u003eEnsure cutting edges are facing down before striking.\u003c\/li\u003e\n\u003cli\u003eTo prevent rust, keep cutters lubricated between uses and store in a dry location.\u003c\/li\u003e\n\u003cli\u003eUse with a 95 durometer urethane pad to extend the life of the cutters.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Value Line","offers":[{"title":"Default Title","offer_id":43582257266902,"sku":"125.1756","price":155.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/125.1756NEW_thumb_fbb47135-5dfd-4c33-bee4-85d4fd6ef323.jpg?v=1777416103"},{"product_id":"square-disc-cutter-set-7-piece-4-16mm-wood-box","title":"Square Shaped Set of 7 Disc Cutters in Wood Box","description":"\u003cp\u003eCut precise square shapes from soft non-ferrous metals with this set of 7 square disc cutters, stored in a fitted wood box. Designed for use with gold, silver, copper, brass, and nickel silver up to 20 gauge thick, each cutter is individually fitted to its matching hole with extremely close tolerances. Made from properly hardened tool steel, these cutters feature very sharp cutting edges and are compatible with a mallet or hydraulic press. Note that the wood box features round storage holes sized to hold the square cutters securely.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSet of 7 square-shaped disc cutters in sizes from 4 mm to 16 mm\u003c\/li\u003e\n\u003cli\u003eManufactured from properly hardened tool steel for durability and precision\u003c\/li\u003e\n\u003cli\u003eEach cutter is individually fitted to its matching hole with extremely close tolerances\u003c\/li\u003e\n\u003cli\u003eVery sharp cutting edges for clean, accurate cuts\u003c\/li\u003e\n\u003cli\u003eCompatible with use by mallet or in a hydraulic press\u003c\/li\u003e\n\u003cli\u003eSuitable for soft non-ferrous metals up to 20 gauge thick, including gold, silver, copper, brass, and nickel silver\u003c\/li\u003e\n\u003cli\u003eIncludes fitted wood storage box with round holes sized for the square cutters\u003c\/li\u003e\n\u003cli\u003eMade in India\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eIncluded Sizes\u003c\/th\u003e\n\u003ctd\u003e4 mm (5\/32\"), 6 mm (1\/4\"), 8 mm (5\/16\"), 10 mm (3\/8\"), 12 mm (1\/2\"), 14 mm (9\/16\"), 16 mm (5\/8\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNumber of Cutters\u003c\/th\u003e\n\u003ctd\u003e7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCutter Shape\u003c\/th\u003e\n\u003ctd\u003eSquare\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eHardened tool steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Metal Thickness\u003c\/th\u003e\n\u003ctd\u003e20 gauge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Metals\u003c\/th\u003e\n\u003ctd\u003eGold, silver, copper, brass, nickel silver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage\u003c\/th\u003e\n\u003ctd\u003eWood box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eIndia\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e7 square disc cutters (4 mm, 6 mm, 8 mm, 10 mm, 12 mm, 14 mm, 16 mm)\u003c\/li\u003e\n\u003cli\u003eWood storage box\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow to use a disc cutter:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUse a disc cutter on top of a rubber pad for support.\u003c\/li\u003e\n\u003cli\u003eApply a cutting lubricant, such as Stay Sharp, to the cutting edges of the punch.\u003c\/li\u003e\n\u003cli\u003eUse a suitable mallet—never a nail-driving hammer. Brass mallets are recommended.\u003c\/li\u003e\n\u003cli\u003eAlways support the opposite side of the cutter with a sheet of the same diameter metal being cut to keep upper and lower parts in alignment and minimize material sticking.\u003c\/li\u003e\n\u003cli\u003eDo not exceed the maximum thickness recommended for your disc cutter.\u003c\/li\u003e\n\u003cli\u003eOnly cut soft non-ferrous metals such as brass, copper, silver, and gold.\u003c\/li\u003e\n\u003cli\u003eEnsure cutting edges are facing down before use.\u003c\/li\u003e\n\u003cli\u003eTo prevent rust, keep the disc cutter lubricated between uses and store in a dry location.\u003c\/li\u003e\n\u003cli\u003eUse with a 95 durometer urethane pad to extend the life of the cutters.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Value Line","offers":[{"title":"Default Title","offer_id":43582257791190,"sku":"125.1755","price":165.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/square-shaped-set-of-7-disc-cutters-in-wood-box-otto-frei.jpg?v=1719957151"},{"product_id":"oval-disc-cutter-set-4-piece-wood-box-13x18-22x30mm","title":"Oval Shaped Set of 4 Disc Cutters in Wood Box","description":"\u003cp\u003eCut precise oval shapes from soft non-ferrous metals with this set of four oval disc cutters, presented in a protective wood storage box. Designed for jewelers and metalsmiths, these cutters are manufactured from properly hardened tool steel with sharp cutting edges individually fitted to their matching holes at extremely close tolerances. The result is clean, accurate oval blanks ready for fabrication, forming, or further finishing work.\u003c\/p\u003e\n\n\u003cp\u003eSuitable for soft precious metals such as gold, silver, and copper up to 20 gauge thick. Other non-ferrous metals including brass and nickel silver can also be cut with care. Use with a mallet or in a hydraulic press.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSet of four oval disc cutters in four sizes: 13x18mm, 16x21mm, 19x24mm, and 22x30mm\u003c\/li\u003e\n\u003cli\u003eManufactured from properly hardened tool steel for long-lasting performance\u003c\/li\u003e\n\u003cli\u003eIndividually fitted cutting edges with extremely close tolerances for clean, accurate cuts\u003c\/li\u003e\n\u003cli\u003eCompatible with mallet use or hydraulic press operation\u003c\/li\u003e\n\u003cli\u003eCuts soft non-ferrous metals up to 20 gauge thick\u003c\/li\u003e\n\u003cli\u003eStored and protected in a wood box\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003e125.1752\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCutter Shape\u003c\/th\u003e\n\u003ctd\u003eOval\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncluded Sizes\u003c\/th\u003e\n\u003ctd\u003e13x18mm, 16x21mm, 19x24mm, 22x30mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQuantity\u003c\/th\u003e\n\u003ctd\u003e4 cutters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Metal Thickness\u003c\/th\u003e\n\u003ctd\u003e20 gauge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Metals\u003c\/th\u003e\n\u003ctd\u003eGold, silver, copper, brass, nickel silver (non-ferrous only)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage\u003c\/th\u003e\n\u003ctd\u003eWood box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCountry of Origin\u003c\/th\u003e\n\u003ctd\u003eIndia\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e4 oval disc cutters (13x18mm, 16x21mm, 19x24mm, 22x30mm)\u003c\/li\u003e\n\u003cli\u003eWood storage box\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse on top of a rubber pad for support during cutting.\u003c\/li\u003e\n\u003cli\u003eApply a cutting lubricant such as Stay Sharp to the cutting edges before use.\u003c\/li\u003e\n\u003cli\u003eUse a suitable mallet — a brass mallet is recommended. Never use a nail-driving hammer.\u003c\/li\u003e\n\u003cli\u003eSupport the opposite side of the cutter with a sheet of the same diameter metal being cut to maintain alignment and minimize material sticking.\u003c\/li\u003e\n\u003cli\u003eDo not exceed the 20-gauge maximum thickness recommendation.\u003c\/li\u003e\n\u003cli\u003eOnly cut soft non-ferrous metals. Never use on ferrous metals.\u003c\/li\u003e\n\u003cli\u003eAlways orient the cutting edges downward during use.\u003c\/li\u003e\n\u003cli\u003eTo prevent rust, keep cutters lubricated between uses and store in a dry location.\u003c\/li\u003e\n\u003cli\u003eUse with a 95 durometer urethane pad to extend cutter life.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Value Line","offers":[{"title":"Default Title","offer_id":43582258282710,"sku":"125.1752","price":140.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/oval-shaped-set-of-4-disc-cutters-in-wood-box-otto-frei-1.jpg?v=1719957151"},{"product_id":"oval-disc-cutter-set-7-piece-wood-box","title":"Oval Shaped Set of 7 Disc Cutters in Wood Box","description":"\u003cp\u003eStop sawing ovals — punch them out instead. This set of 7 oval disc cutters gives jewelers and metalsmiths a fast, precise way to produce clean oval blanks from soft, non-ferrous metals. Each cutter is individually fitted to its matching hole with extremely close tolerances, delivering crisp, accurate cuts every time. The set arrives in a wood storage box with round holes sized to hold each oval cutter securely.\u003c\/p\u003e\n\n\u003cp\u003eThese cutters are designed for use with a mallet or hydraulic press and are manufactured from properly hardened tool steel for long-lasting performance. Cutting edges are very sharp right out of the box. Made in India.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSet of 7 oval disc cutters in 7 different sizes\u003c\/li\u003e\n\u003cli\u003eIndividually fitted punches and dies with extremely close tolerances for clean, accurate cuts\u003c\/li\u003e\n\u003cli\u003eManufactured from properly hardened tool steel\u003c\/li\u003e\n\u003cli\u003eVery sharp cutting edges for precise blanks\u003c\/li\u003e\n\u003cli\u003eCompatible with mallet or hydraulic press use\u003c\/li\u003e\n\u003cli\u003eIncludes wood storage box with dedicated holes for each cutter\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eIncluded Sizes\u003c\/th\u003e\n\u003ctd\u003e6x4mm, 8x6mm, 10x8mm, 10x12mm, 14x10mm, 16x14mm, 18x16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNumber of Cutters\u003c\/th\u003e\n\u003ctd\u003e7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Metal Thickness\u003c\/th\u003e\n\u003ctd\u003e20 gauge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Metals\u003c\/th\u003e\n\u003ctd\u003eGold, silver, copper, brass, nickel silver (soft non-ferrous metals only)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTool Material\u003c\/th\u003e\n\u003ctd\u003eHardened tool steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage\u003c\/th\u003e\n\u003ctd\u003eWood box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eIndia\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse on top of a rubber pad for support during punching.\u003c\/li\u003e\n\u003cli\u003eApply a cutting lubricant such as Stay Sharp to the cutting edges before use.\u003c\/li\u003e\n\u003cli\u003eUse a suitable mallet — a brass mallet is recommended. Never use a nail-driving hammer.\u003c\/li\u003e\n\u003cli\u003eSupport the opposite side of the cutter with a sheet of the same diameter metal being cut to maintain alignment and minimize material sticking.\u003c\/li\u003e\n\u003cli\u003eDo not exceed the maximum recommended thickness of 20 gauge.\u003c\/li\u003e\n\u003cli\u003eOnly cut soft non-ferrous metals. Do not use on ferrous metals.\u003c\/li\u003e\n\u003cli\u003eAlways position cutting edges facing down.\u003c\/li\u003e\n\u003cli\u003eTo prevent rust, keep cutters lubricated between uses and store in a dry location.\u003c\/li\u003e\n\u003cli\u003eOtto Frei recommends using with a 95 durometer urethane pad to extend cutter life.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Value Line","offers":[{"title":"Default Title","offer_id":43582258643158,"sku":"125.1751","price":150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/oval-shaped-set-of-7-disc-cutters-in-wood-box-otto-frei-1.jpg?v=1719957151"},{"product_id":"large-round-disc-cutter-set-2pc-1-3-4-1-3-8","title":"Large Round Disc Cutter Set of 2","description":"\u003cp\u003eCut large, clean metal discs with precision using this two-piece round disc cutter set, designed for forming consistent blanks in larger formats. Built for reliability and accuracy, it delivers smooth, burr-free cuts that feel crisp and controlled with every strike.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes two large disc sizes for creating substantial blanks\u003c\/li\u003e\n\u003cli\u003eHardened tool steel construction for durability and long service life\u003c\/li\u003e\n\u003cli\u003eSharp cutting edges produce clean, consistent results\u003c\/li\u003e\n\u003cli\u003eClose-tolerance fit between punches and dies ensures accuracy\u003c\/li\u003e\n\u003cli\u003eWorks with mallet or hydraulic press\u003c\/li\u003e\n\u003cli\u003eSuitable for soft non-ferrous metals\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSet Contents\u003c\/th\u003e\n\u003ctd\u003e2 round disc cutters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDisc Sizes\u003c\/th\u003e\n\u003ctd\u003e1-3\/4\" (44.5 mm) and 1-3\/8\" (34.9 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Metal Thickness\u003c\/th\u003e\n\u003ctd\u003e20 gauge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Metals\u003c\/th\u003e\n\u003ctd\u003eGold, silver, copper, brass, nickel silver (non-ferrous only)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTool Material\u003c\/th\u003e\n\u003ctd\u003eHardened tool steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufactured In\u003c\/th\u003e\n\u003ctd\u003eIndia\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1-3\/4\" round disc cutter\u003c\/li\u003e\n\u003cli\u003e1-3\/8\" round disc cutter\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow to use a disc cutter:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003ePlace the disc cutter on top of a rubber pad for support.\u003c\/li\u003e\n\u003cli\u003eApply a cutting lubricant, such as Stay Sharp, to the cutting edges of the punch.\u003c\/li\u003e\n\u003cli\u003eStrike with a suitable mallet only — never a nail-driving hammer. Brass mallets are recommended.\u003c\/li\u003e\n\u003cli\u003eSupport the opposite side of the cutter with a sheet of the same diameter metal being cut. This keeps the upper and lower parts in alignment and minimizes material sticking.\u003c\/li\u003e\n\u003cli\u003eDo not exceed the maximum recommended metal thickness (20 gauge).\u003c\/li\u003e\n\u003cli\u003eOnly cut soft, non-ferrous metals such as brass, copper, silver, and gold.\u003c\/li\u003e\n\u003cli\u003eEnsure cutting edges are facing down before striking.\u003c\/li\u003e\n\u003cli\u003eTo prevent rust, keep the cutter lubricated between uses and store in a dry location.\u003c\/li\u003e\n\u003cli\u003eUse with a 95 durometer urethane pad to help extend the life of the cutters.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Value Line","offers":[{"title":"Default Title","offer_id":43582314610902,"sku":"125.1781","price":88.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/125.1781NEW_zoom4.jpg?v=1775591909"},{"product_id":"assorted-shapes-disc-cutter-set-9-piece-wood-box","title":"Assorted Shapes Set of 9 Disc Cutters in Wood Box","description":"\u003cp\u003eCut precise, professional-quality metal shapes with this set of 9 assorted disc cutters, presented in a convenient wood storage box. Designed for jewelers and metalsmiths working with soft precious and non-ferrous metals, these cutters produce clean, sharp-edged shapes from gold, silver, copper, brass, and nickel silver up to 20 gauge thick. Made in India from properly hardened tool steel, each cutter features extremely sharp cutting edges individually fitted to their matching holes with close tolerances for accurate, consistent results. Compatible with use by mallet or hydraulic press.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSet of 9 assorted shape cutters in 9 distinct forms for versatile metalworking applications\u003c\/li\u003e\n\u003cli\u003eCrafted from properly hardened tool steel with individually fitted, close-tolerance cutting edges\u003c\/li\u003e\n\u003cli\u003eCuts soft non-ferrous metals including gold, silver, copper, brass, and nickel silver up to 20 gauge thick\u003c\/li\u003e\n\u003cli\u003eCompatible with mallet or hydraulic press use\u003c\/li\u003e\n\u003cli\u003eIncludes a wood storage box with shaped holes sized to hold each individual cutter\u003c\/li\u003e\n\u003cli\u003eMade in India\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eIncluded Shapes\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Metal Thickness\u003c\/th\u003e\n\u003ctd\u003e20 gauge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Metals\u003c\/th\u003e\n\u003ctd\u003eGold, silver, copper, brass, nickel silver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTool Material\u003c\/th\u003e\n\u003ctd\u003eHardened tool steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage\u003c\/th\u003e\n\u003ctd\u003eWood box with shaped storage holes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eIndia\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSquare – 12mm\u003c\/li\u003e\n\u003cli\u003eHeart – 12mm x 12mm\u003c\/li\u003e\n\u003cli\u003eTeardrop – 10mm x 14mm\u003c\/li\u003e\n\u003cli\u003eRectangle – 10mm x 14mm\u003c\/li\u003e\n\u003cli\u003eStar – 15.25mm\u003c\/li\u003e\n\u003cli\u003eOval – 8mm x 12mm\u003c\/li\u003e\n\u003cli\u003eTriangle – 12.4mm\u003c\/li\u003e\n\u003cli\u003eRhombus – 11.5mm x 17.5mm\u003c\/li\u003e\n\u003cli\u003eFlower – 13mm x 14mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse on top of a rubber pad for support during cutting.\u003c\/li\u003e\n\u003cli\u003eApply a cutting lubricant to the cutting edges before use—Stay Sharp is recommended.\u003c\/li\u003e\n\u003cli\u003eUse a suitable mallet only; never use a nail-driving hammer. Brass mallets are recommended.\u003c\/li\u003e\n\u003cli\u003eSupport the opposite side of the cutter with a sheet of matching-diameter metal to maintain alignment and minimize material sticking.\u003c\/li\u003e\n\u003cli\u003eDo not exceed the maximum recommended thickness of 20 gauge.\u003c\/li\u003e\n\u003cli\u003eOnly cut soft non-ferrous metals; do not use on ferrous metals.\u003c\/li\u003e\n\u003cli\u003eEnsure cutting edges are facing down before striking.\u003c\/li\u003e\n\u003cli\u003eTo prevent rust, keep cutters lubricated between uses and store in a dry location.\u003c\/li\u003e\n\u003cli\u003eA 95 durometer urethane pad is recommended to extend cutter life.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Value Line","offers":[{"title":"Default Title","offer_id":43582315233494,"sku":"125.1782","price":172.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/125.1782NEW_thumb_c192fafb-b1e6-4e86-86a7-af2134cb711d.jpg?v=1787695755"},{"product_id":"heart-shaped-disc-cutter-set-5-piece-wood-box","title":"Fancy Hearts Shaped Set of 5 Disc Cutters in Wood Box","description":"\u003cp\u003eCut precise heart-shaped blanks from sheet metal with this set of five graduated heart disc cutters, stored in a fitted wood box. Designed for professional jewelers and metalsmiths, these cutters are manufactured from properly hardened tool steel with individually fitted punches and extremely close tolerances between each punch and its matching die hole. The result is clean, burr-minimized cuts with sharp, consistent edges across every size in the set.\u003c\/p\u003e\n\n\u003cp\u003eThese cutters work on soft precious and non-ferrous metals including gold, silver, copper, brass, and nickel silver up to 20 gauge thick. Use with a mallet on a rubber pad or mount in a hydraulic press for production work. Made in India.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSet of 5 heart-shaped disc cutters in graduated sizes\u003c\/li\u003e\n\u003cli\u003eHardened tool steel construction with sharp cutting edges\u003c\/li\u003e\n\u003cli\u003eEach punch individually fitted to its matching die hole with close tolerances\u003c\/li\u003e\n\u003cli\u003eCompatible with mallet use or hydraulic press\u003c\/li\u003e\n\u003cli\u003eSuitable for gold, silver, copper, brass, and nickel silver up to 20 gauge thick\u003c\/li\u003e\n\u003cli\u003eFitted wood storage box with holes sized for heart cutters\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow to Use a Disc Cutter\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003ePlace the disc cutter on top of a rubber pad for support.\u003c\/li\u003e\n\u003cli\u003eApply a cutting lubricant such as Stay Sharp to the cutting edges of the punch.\u003c\/li\u003e\n\u003cli\u003eUse a suitable mallet — a brass mallet is recommended. Never use a nail-driving hammer.\u003c\/li\u003e\n\u003cli\u003eSupport the opposite side of the cutter with a sheet of the same diameter metal being cut to maintain alignment and minimize material sticking.\u003c\/li\u003e\n\u003cli\u003eDo not exceed the maximum recommended metal thickness for the cutter.\u003c\/li\u003e\n\u003cli\u003eCut only soft non-ferrous metals such as brass, copper, silver, and gold.\u003c\/li\u003e\n\u003cli\u003eEnsure cutting edges are facing down before striking.\u003c\/li\u003e\n\u003cli\u003eTo prevent rust, keep the cutter lubricated between uses and store in a dry location.\u003c\/li\u003e\n\u003cli\u003eUse with a 95 durometer urethane pad to extend cutter life.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSet Quantity\u003c\/th\u003e\n\u003ctd\u003e5 cutters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCutter Shape\u003c\/th\u003e\n\u003ctd\u003eHeart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eHardened tool steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Metal Thickness\u003c\/th\u003e\n\u003ctd\u003e20 gauge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Metals\u003c\/th\u003e\n\u003ctd\u003eGold, silver, copper, brass, nickel silver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse With\u003c\/th\u003e\n\u003ctd\u003eMallet or hydraulic press\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage\u003c\/th\u003e\n\u003ctd\u003eFitted wood box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCountry of Origin\u003c\/th\u003e\n\u003ctd\u003eIndia\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e5 heart-shaped disc cutters: 8 x 12 mm, 11 x 18 mm, 13 x 21 mm, 15 x 24 mm, 17 x 28 mm\u003c\/li\u003e\n\u003cli\u003eFitted wood storage box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Value Line","offers":[{"title":"Default Title","offer_id":43582315823318,"sku":"125.1783","price":152.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/125.1783NEW_thumb_72971a2b-5fce-4333-b1d5-710793582297.jpg?v=1787167585"},{"product_id":"teardrop-disc-cutter-set-4-piece-wood-box","title":"Teardrop Shaped Set of 4 Disc Cutters in Wood Box","description":"\u003cp\u003eCut precise teardrop-shaped blanks from soft non-ferrous metals with this set of four hardened tool steel disc cutters. Each cutter is individually fitted to its matching hole with extremely close tolerances, ensuring clean, accurate cuts every time. The set ships in a wooden storage box and covers four teardrop sizes to support a range of pendant, earring, and decorative metalwork applications.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSet of four teardrop-shaped disc cutters spanning four sizes\u003c\/li\u003e\n\u003cli\u003eMade from properly hardened tool steel with very sharp cutting edges\u003c\/li\u003e\n\u003cli\u003eEach punch is individually fitted to its matching die hole with extremely close tolerances\u003c\/li\u003e\n\u003cli\u003eCompatible with use under a mallet or in a hydraulic press\u003c\/li\u003e\n\u003cli\u003eCuts soft precious and non-ferrous metals up to 20 gauge thick\u003c\/li\u003e\n\u003cli\u003eIncludes a wooden storage box with shaped holes to organize the cutters\u003c\/li\u003e\n\u003cli\u003eSuitable for gold, silver, copper, brass, and nickel silver with appropriate care\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow to Use a Disc Cutter\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003ePlace the disc cutter on top of a rubber pad for support.\u003c\/li\u003e\n\u003cli\u003eApply a cutting lubricant, such as Stay Sharp, to the cutting edges of the punch.\u003c\/li\u003e\n\u003cli\u003eStrike with a suitable mallet—never a nail-driving hammer; a brass mallet is recommended.\u003c\/li\u003e\n\u003cli\u003eSupport the opposite side of the cutter with a sheet of the same-diameter metal being cut to keep upper and lower parts in alignment and minimize material sticking.\u003c\/li\u003e\n\u003cli\u003eDo not exceed the maximum recommended metal thickness for the cutter.\u003c\/li\u003e\n\u003cli\u003eOnly cut soft, non-ferrous metals such as brass, copper, silver, and gold.\u003c\/li\u003e\n\u003cli\u003eEnsure cutting edges are facing down before striking.\u003c\/li\u003e\n\u003cli\u003eTo prevent rust, keep the cutters lubricated between uses and store in a dry location.\u003c\/li\u003e\n\u003cli\u003eUse with a 95 durometer urethane pad to extend the life of the cutters.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSet Contents\u003c\/th\u003e\n\u003ctd\u003e4 teardrop-shaped disc cutters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCutter Sizes\u003c\/th\u003e\n\u003ctd\u003e13 x 18 mm, 15 x 21 mm, 19 x 26 mm, 22 x 30 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Metal Thickness\u003c\/th\u003e\n\u003ctd\u003e20 gauge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Metals\u003c\/th\u003e\n\u003ctd\u003eGold, silver, copper, brass, nickel silver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eHardened tool steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse Method\u003c\/th\u003e\n\u003ctd\u003eMallet or hydraulic press\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage\u003c\/th\u003e\n\u003ctd\u003eWooden box with shaped storage holes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCountry of Origin\u003c\/th\u003e\n\u003ctd\u003eIndia\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e4 teardrop-shaped disc cutters (13 x 18 mm, 15 x 21 mm, 19 x 26 mm, 22 x 30 mm)\u003c\/li\u003e\n\u003cli\u003eWooden storage box\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not use with ferrous metals.\u003c\/li\u003e\n\u003cli\u003eStore cutters lubricated and in a dry location to prevent rust.\u003c\/li\u003e\n\u003cli\u003eA 95 durometer urethane pad is recommended to extend cutter life.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Value Line","offers":[{"title":"Default Title","offer_id":43582318182614,"sku":"125.1788","price":128.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/teardrop-shaped-set-of-4-disc-cutters-in-wood-box-otto-frei-1.jpg?v=1719957094"},{"product_id":"jumbo-oval-disc-cutter-set-2-28x40mm-35x50mm-wood-box","title":"Jumbo Oval Shaped Set of 2 Disc Cutters in Wood Box","description":"\u003cp\u003eThe Jumbo Oval Shaped Disc Cutter Set includes two large oval punches for cutting precise oval blanks from soft precious and non-ferrous metals. Designed for jewelers and metalsmiths working at a larger scale, these cutters produce clean, accurate ovals from gold, silver, copper, brass, and nickel silver up to 20 gauge thick. Each punch is individually fitted to its matching die with extremely close tolerances, ensuring clean edges and consistent results. The set is crafted from properly hardened tool steel for durability and long-term performance and arrives stored in a wood box.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSet of 2 jumbo oval disc cutters in two sizes\u003c\/li\u003e\n\u003cli\u003eIndividually fitted punches with extremely close tolerances for precise cuts\u003c\/li\u003e\n\u003cli\u003eCutting edges are very sharp for clean, burr-minimized blanks\u003c\/li\u003e\n\u003cli\u003eMade from properly hardened tool steel\u003c\/li\u003e\n\u003cli\u003eCompatible with use by mallet or hydraulic press\u003c\/li\u003e\n\u003cli\u003eStored in a wood box for organized, protected storage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow to Use a Disc Cutter\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003ePlace the disc cutter on top of a rubber pad for support.\u003c\/li\u003e\n\u003cli\u003eApply a cutting lubricant, such as Stay Sharp, to the cutting edges of the punch.\u003c\/li\u003e\n\u003cli\u003eStrike with a suitable mallet—never a nail-driving hammer; a brass mallet is recommended.\u003c\/li\u003e\n\u003cli\u003eSupport the opposite side of the cutter with a sheet of the same-diameter metal being cut to maintain alignment and minimize material sticking.\u003c\/li\u003e\n\u003cli\u003eDo not exceed the maximum recommended metal thickness for the cutter.\u003c\/li\u003e\n\u003cli\u003eCut soft non-ferrous metals only: brass, copper, silver, and gold.\u003c\/li\u003e\n\u003cli\u003eEnsure cutting edges are facing down before striking.\u003c\/li\u003e\n\u003cli\u003eTo prevent rust, keep the cutter lubricated between uses and store in a dry location.\u003c\/li\u003e\n\u003cli\u003eUse with a 95 durometer urethane pad to extend the life of the cutters.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eIncluded Sizes\u003c\/th\u003e\n\u003ctd\u003e28mm x 40mm; 35mm x 50mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNumber of Cutters\u003c\/th\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Metal Thickness\u003c\/th\u003e\n\u003ctd\u003e20 gauge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Metals\u003c\/th\u003e\n\u003ctd\u003eGold, silver, copper, brass, nickel silver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTool Material\u003c\/th\u003e\n\u003ctd\u003eHardened tool steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse With\u003c\/th\u003e\n\u003ctd\u003eMallet or hydraulic press\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage\u003c\/th\u003e\n\u003ctd\u003eWood box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCountry of Origin\u003c\/th\u003e\n\u003ctd\u003eIndia\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2 jumbo oval disc cutters (28mm x 40mm and 35mm x 50mm)\u003c\/li\u003e\n\u003cli\u003eWood storage box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Value Line","offers":[{"title":"Default Title","offer_id":43582318805206,"sku":"125.1784","price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/jumbo-oval-shaped-set-of-2-disc-cutters-in-wood-box-otto-frei-1.jpg?v=1719957091"},{"product_id":"jumbo-heart-disc-cutter-set-2-28mm-34mm-wood-box","title":"Jumbo Heart Shaped Set of 2 Disc Cutters in Wood Box","description":"\u003cp\u003eCut precise jumbo heart shapes from soft non-ferrous sheet metal with this set of two hardened tool steel disc cutters. Presented in a fitted wood storage box, this set includes two sizes — \u003cstrong\u003e28mm × 36mm\u003c\/strong\u003e and \u003cstrong\u003e34mm × 43mm\u003c\/strong\u003e — making it ideal for jewelers and metalsmiths who need oversized heart blanks for pendants, charms, and decorative metalwork. Each punch is individually fitted to its matching hole with extremely close tolerances, ensuring clean, accurate cuts every time.\u003c\/p\u003e\n\u003cp\u003eSuitable for soft precious and non-ferrous metals including gold, silver, copper, brass, and nickel silver up to \u003cstrong\u003e20 gauge thick\u003c\/strong\u003e. Use with a mallet or in a hydraulic press. The wood storage box features round holes sized to hold the heart-shaped cutters securely when not in use.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSet of 2 jumbo heart-shaped disc cutters: 28mm × 36mm and 34mm × 43mm\u003c\/li\u003e\n\u003cli\u003eProperly hardened tool steel construction with very sharp cutting edges\u003c\/li\u003e\n\u003cli\u003eEach cutter individually fitted to its matching hole with extremely close tolerances\u003c\/li\u003e\n\u003cli\u003eCompatible with mallet use or hydraulic press\u003c\/li\u003e\n\u003cli\u003ePresented in a fitted wood storage box\u003c\/li\u003e\n\u003cli\u003eFor use on soft non-ferrous metals up to 20 gauge thick\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSet Contents\u003c\/th\u003e\n\u003ctd\u003e2 heart-shaped disc cutters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSizes Included\u003c\/th\u003e\n\u003ctd\u003e28mm × 36mm; 34mm × 43mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Metal Thickness\u003c\/th\u003e\n\u003ctd\u003e20 gauge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Metals\u003c\/th\u003e\n\u003ctd\u003eGold, silver, copper, brass, nickel silver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eHardened tool steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage\u003c\/th\u003e\n\u003ctd\u003eWood box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCountry of Origin\u003c\/th\u003e\n\u003ctd\u003eIndia\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse the disc cutter on top of a rubber pad for support.\u003c\/li\u003e\n\u003cli\u003eApply a cutting lubricant, such as Stay Sharp, to the cutting edges before use.\u003c\/li\u003e\n\u003cli\u003eUse a suitable mallet — never a nail-driving hammer. A brass mallet is recommended.\u003c\/li\u003e\n\u003cli\u003eSupport the opposite side of the cutter with a sheet of the same diameter metal being cut to maintain alignment and reduce material sticking.\u003c\/li\u003e\n\u003cli\u003eDo not exceed the 20-gauge maximum thickness recommendation.\u003c\/li\u003e\n\u003cli\u003eOnly cut soft non-ferrous metals. Never use on ferrous metals.\u003c\/li\u003e\n\u003cli\u003eEnsure cutting edges are facing down before striking.\u003c\/li\u003e\n\u003cli\u003eTo prevent rust, lubricate cutting edges after use and store in a dry location.\u003c\/li\u003e\n\u003cli\u003eUse with a 95 durometer urethane pad to extend the life of the cutters.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Value Line","offers":[{"title":"Default Title","offer_id":43582319493334,"sku":"125.1786","price":158.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/jumbo-heart-shaped-set-of-2-disc-cutters-in-wood-box-otto-frei.jpg?v=1719957091"},{"product_id":"jumbo-square-disc-cutter-set-2-piece-32mm-38mm-wood-box","title":"Jumbo Square Shaped Set of 2 Disc Cutters in Wood Box","description":"\u003cp\u003e\u003cstrong\u003eStop sawing jumbo squares — just punch them out.\u003c\/strong\u003e This set of two jumbo square disc cutters gives metalsmiths and jewelers a fast, clean way to produce large square metal blanks without sawing. Housed in a fitted wood storage box, the set includes a \u003cstrong\u003e32mm\u003c\/strong\u003e and a \u003cstrong\u003e38mm\u003c\/strong\u003e square cutter, covering the larger blank sizes commonly needed for pendants, tags, and statement metalwork.\u003c\/p\u003e\n\n\u003cp\u003eEach cutter is manufactured from properly hardened tool steel. The cutting edges are individually fitted to their matching holes with extremely close tolerances, producing clean, precise blanks with minimal finishing work. These cutters are designed for use on soft precious and non-ferrous metals — including gold, silver, copper, brass, and nickel silver — up to \u003cstrong\u003e20 gauge\u003c\/strong\u003e thick. Use with a mallet on a rubber pad or in a hydraulic press.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSet of two jumbo square cutters: 32mm and 38mm\u003c\/li\u003e\n\u003cli\u003eHardened tool steel construction with sharply ground cutting edges\u003c\/li\u003e\n\u003cli\u003eIndividually fitted punches and dies with extremely close tolerances\u003c\/li\u003e\n\u003cli\u003eCuts soft non-ferrous metals up to 20 gauge thick\u003c\/li\u003e\n\u003cli\u003eCompatible with mallet use or hydraulic press\u003c\/li\u003e\n\u003cli\u003eFitted wood storage box included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow to Use a Disc Cutter\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003ePlace the disc cutter on top of a rubber pad for support.\u003c\/li\u003e\n\u003cli\u003eApply a cutting lubricant — such as Stay Sharp — to the cutting edges of the punch.\u003c\/li\u003e\n\u003cli\u003eStrike with a suitable mallet only; never use a nail-driving hammer. A brass mallet is recommended.\u003c\/li\u003e\n\u003cli\u003eSupport the opposite side of the cutter with a sheet of the same diameter metal being cut. This keeps upper and lower cutter sections aligned and reduces material sticking.\u003c\/li\u003e\n\u003cli\u003eDo not exceed the maximum recommended cutting thickness for the cutter.\u003c\/li\u003e\n\u003cli\u003eCut only soft non-ferrous metals such as brass, copper, silver, and gold.\u003c\/li\u003e\n\u003cli\u003eEnsure cutting edges are facing down before striking.\u003c\/li\u003e\n\u003cli\u003eTo prevent rust, keep cutters lubricated between uses and store in a dry location.\u003c\/li\u003e\n\u003cli\u003eUse with a 95 durometer urethane pad to help extend cutter life.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eIncluded Sizes\u003c\/th\u003e\n\u003ctd\u003e32mm, 38mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCutter Shape\u003c\/th\u003e\n\u003ctd\u003eSquare\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQuantity\u003c\/th\u003e\n\u003ctd\u003eSet of 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Material Thickness\u003c\/th\u003e\n\u003ctd\u003e20 gauge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Metals\u003c\/th\u003e\n\u003ctd\u003eGold, silver, copper, brass, nickel silver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTool Steel\u003c\/th\u003e\n\u003ctd\u003eProperly hardened tool steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage\u003c\/th\u003e\n\u003ctd\u003eFitted wood box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCountry of Origin\u003c\/th\u003e\n\u003ctd\u003eIndia\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 × 32mm square disc cutter\u003c\/li\u003e\n\u003cli\u003e1 × 38mm square disc cutter\u003c\/li\u003e\n\u003cli\u003eFitted wood storage box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Value Line","offers":[{"title":"Default Title","offer_id":43582322802902,"sku":"125.1785","price":128.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/jumbo-square-shaped-set-of-2-disc-cutters-in-wood-box-otto-frei-1.jpg?v=1719957091"},{"product_id":"replacement-13-16-punch-pepetools-disc-cutters-125-140-125-143","title":"Replacement 13\/16\" Punch For 125.140 \u0026 125.143 Pepe Disk Cutters","description":"\u003cp\u003eKeep your Pepetools disc cutter set operational with this replacement 13\/16\" punch, designed specifically for original 1st generation Pepetools disc cutter sets. Compatible with models 125.140 and 125.143, this punch ensures you can maintain your tools without replacing the entire set.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e This replacement punch is for the original 1st generation Pepetools disc cutter sets only. It is \u003cem\u003enot\u003c\/em\u003e compatible with the current version of the 125.140.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePunch Size\u003c\/th\u003e\n\u003ctd\u003e13\/16\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Models\u003c\/th\u003e\n\u003ctd\u003e125.140 (1st generation only) \u0026amp; 125.143\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eThis punch is intended for the original 1st generation Pepetools disc cutter sets only. It is \u003cstrong\u003enot\u003c\/strong\u003e compatible with the current version of the 125.140 disc cutter. Verify your disc cutter's generation before ordering.\u003c\/p\u003e","brand":"Pepetools","offers":[{"title":"Default Title","offer_id":43583413649622,"sku":"125.140-13\/16","price":19.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/replacement-1316-punch-for-125-140-and-125-143-pepe-disk-cutters-otto-frei.jpg?v=1719956664"},{"product_id":"eurotool-cold-connection-replacement-punch-set-4-piece-pun-420-54","title":"Euro Tool Cold Connection Replacement 4 Hole Punch Set","description":"\u003cp\u003eKeep your cold connection workflow uninterrupted with this set of replacement punches designed specifically for the Eurotool Cold Connection Punch (Otto Frei No. 146.734 \/ Eurotool No. PUN-420.04). Sold only as a complete set of 4, these punches cover the most common wire gauges used in cold connection techniques, ensuring precise, clean holes sized to accept wire without play or distortion.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReplacement punch set designed for Eurotool Cold Connection Punch No. PUN-420.04 (Otto Frei No. 146.734)\u003c\/li\u003e\n\u003cli\u003eSet of 4 punches covering four wire gauge sizes\u003c\/li\u003e\n\u003cli\u003ePunches sized to fit 18, 16, 14, and 12 gauge wire\u003c\/li\u003e\n\u003cli\u003eSold only as a complete set — individual punches not available separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eEurotool Part Number\u003c\/th\u003e\n\u003ctd\u003ePUN-420.54\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Tool\u003c\/th\u003e\n\u003ctd\u003eEurotool Cold Connection Punch PUN-420.04 (Otto Frei No. 146.734)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack Quantity\u003c\/th\u003e\n\u003ctd\u003eSet of 4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePunch Sizes\u003c\/th\u003e\n\u003ctd\u003e18 gauge (1.1 mm), 16 gauge (1.4 mm), 14 gauge (1.7 mm), 12 gauge (2.15 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e4 replacement punches: 18 gauge (1.1 mm), 16 gauge (1.4 mm), 14 gauge (1.7 mm), and 12 gauge (2.15 mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eThese replacement punches are designed for use with the \u003cstrong\u003eEurotool Cold Connection Punch PUN-420.04\u003c\/strong\u003e (sold separately as Otto Frei No. 146.734). Verify tool compatibility before ordering.\u003c\/p\u003e","brand":"Eurotool","offers":[{"title":"Default Title","offer_id":43584682721494,"sku":"146.754","price":32.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/euro-tool-cold-connection-replacement-4-hole-punch-set-otto-frei.jpg?v=1719956023"},{"product_id":"eurotool-cold-connection-replacement-punch-set-pun-420-53-3-piece","title":"Euro Tool Cold Connection Replacement 3 Hole Punch Set","description":"\u003cp\u003eKeep your EuroTool Cold Connection Punch performing at its best with this set of three replacement punches. Designed specifically for the EuroTool Cold Connection Punch (Otto Frei No. 146.733 \/ EuroTool No. PUN-420.03), these punches restore full functionality when originals wear or break. Sold only as a complete set of three.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReplacement punch set designed for the EuroTool Cold Connection Punch (Otto Frei No. 146.733 \/ EuroTool No. PUN-420.03)\u003c\/li\u003e\n\u003cli\u003eIncludes three punches covering the most commonly used cold-connection hole sizes\u003c\/li\u003e\n\u003cli\u003eSold as a set of 3 — individual punches are not available separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eEuroTool Part Number\u003c\/th\u003e\n\u003ctd\u003ePUN-420.53\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible With\u003c\/th\u003e\n\u003ctd\u003eEuroTool Cold Connection Punch (Otto Frei No. 146.733 \/ EuroTool No. PUN-420.03)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack Quantity\u003c\/th\u003e\n\u003ctd\u003eSet of 3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePunch Sizes Included\u003c\/th\u003e\n\u003ctd\u003e1\/16\" (1.6 mm), 3\/32\" (2.4 mm), 1\/8\" (3.17 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1\/16\" (1.6 mm) replacement punch\u003c\/li\u003e\n\u003cli\u003e3\/32\" (2.4 mm) replacement punch\u003c\/li\u003e\n\u003cli\u003e1\/8\" (3.17 mm) replacement punch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Eurotool","offers":[{"title":"Default Title","offer_id":43584683376854,"sku":"146.753","price":28.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/euro-tool-cold-connection-replacement-3-hole-punch-set-otto-frei.jpg?v=1719956023"},{"product_id":"rectangle-disc-cutter-set-4-wood-box-10x15-25x30mm","title":"Rectangle Shaped Set of 4 Disc Cutters in Wood Box","description":"\u003cp\u003eCut precise rectangle shapes from soft non-ferrous metals with this set of four rectangle disc cutters, stored in a fitted wood box. Designed for use with gold, silver, copper, brass, and nickel silver up to 20 gauge thick, these cutters are manufactured from properly hardened tool steel with very sharp cutting edges and extremely close tolerances between each punch and its matching hole. Compatible with a mallet or hydraulic press, this set is a reliable choice for jewelers and metalsmiths who need consistent, clean rectangular blanks.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSet of four rectangle-shaped disc cutters in graduated sizes\u003c\/li\u003e\n\u003cli\u003eManufactured from properly hardened tool steel for long-lasting performance\u003c\/li\u003e\n\u003cli\u003eIndividually fitted punches matched to corresponding holes with extremely close tolerances\u003c\/li\u003e\n\u003cli\u003eVery sharp cutting edges for clean, precise blanks\u003c\/li\u003e\n\u003cli\u003eCompatible with use by mallet or in a hydraulic press\u003c\/li\u003e\n\u003cli\u003eSuitable for gold, silver, copper, brass, and nickel silver up to 20 gauge thick\u003c\/li\u003e\n\u003cli\u003eStored in a fitted wood box for organized storage and protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eCutter Shapes\u003c\/th\u003e\n\u003ctd\u003eRectangle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNumber of Cutters\u003c\/th\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCutter Sizes Included\u003c\/th\u003e\n\u003ctd\u003e10mm x 15mm, 15mm x 20mm, 20mm x 25mm, 25mm x 30mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Metal Thickness\u003c\/th\u003e\n\u003ctd\u003e20 gauge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Metals\u003c\/th\u003e\n\u003ctd\u003eGold, silver, copper, brass, nickel silver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTool Material\u003c\/th\u003e\n\u003ctd\u003eHardened tool steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage\u003c\/th\u003e\n\u003ctd\u003eWood box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCountry of Origin\u003c\/th\u003e\n\u003ctd\u003eIndia\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse on top of a rubber pad for support during cutting.\u003c\/li\u003e\n\u003cli\u003eApply a cutting lubricant such as Stay Sharp to the cutting edges before use.\u003c\/li\u003e\n\u003cli\u003eUse a suitable mallet only—never a nail-driving hammer. A brass mallet is recommended.\u003c\/li\u003e\n\u003cli\u003eSupport the opposite side of the cutter with a sheet of the same diameter metal being cut to maintain alignment and minimize material sticking.\u003c\/li\u003e\n\u003cli\u003eDo not exceed the 20 gauge maximum thickness recommendation.\u003c\/li\u003e\n\u003cli\u003eOnly cut soft non-ferrous metals—do not use on ferrous metals.\u003c\/li\u003e\n\u003cli\u003eEnsure cutting edges are facing down before striking.\u003c\/li\u003e\n\u003cli\u003eTo prevent rust, keep cutters lubricated between uses and store in a dry location.\u003c\/li\u003e\n\u003cli\u003eUse with a 95 durometer urethane pad to extend the life of the cutters.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Value Line","offers":[{"title":"Default Title","offer_id":43586823880918,"sku":"125.1789","price":127.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/rectangle-shaped-set-of-4-disc-cutters-in-wood-box-otto-frei-1.jpg?v=1719955771"},{"product_id":"nylon-center-positioning-dies-disc-cutting-half-inch-to-1-inch-set-of-5","title":"Nylon Center Positioning Dies For Disc Cutting -Set of Five-1\/2\" to 1\"","description":"\u003cp\u003eCreate perfectly centered washers and ring blanks with this set of five nylon center positioning dies. Designed to fit the V-Line disk cutter (125.1734), these dies are also compatible with other round disk cutting sets that have similar hole sizes, including inch-sized disc cutter sets 125.1738, 125.1737, and 125.1790, matching holes from 1\/2\" to 1\".\u003c\/p\u003e\u003cp\u003eEach nylon centering die holds a pre-punched metal disk precisely in place beneath a larger punch, ensuring the inner hole is perfectly centered before the outer diameter is cut. The result is a clean, symmetrical washer every time — ideal for ring blanks, decorative washers, and layered metalwork.\u003c\/p\u003e\u003ch3\u003eHow to Use\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003ePunch a hole in your metal using the punch size that matches your desired inner diameter.\u003c\/li\u003e\n\u003cli\u003eRemove the cut disk and position it beneath a larger punch hole sized to your desired outer diameter.\u003c\/li\u003e\n\u003cli\u003eInsert the matching centering die for that hole to center the disk precisely.\u003c\/li\u003e\n\u003cli\u003eClamp the disk between the upper and lower halves of the disc cutter using a clamping device, such as the Pepetools clamping device.\u003c\/li\u003e\n\u003cli\u003eRemove the centering die and replace it with the correct cutting die for the hole you are using.\u003c\/li\u003e\n\u003cli\u003ePunch the outer diameter — your washer now has a perfectly centered hole.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSet of five nylon center positioning dies in graduated sizes\u003c\/li\u003e\n\u003cli\u003eDesigned for use with V-Line disk cutter 125.1734\u003c\/li\u003e\n\u003cli\u003eCompatible with inch-sized disc cutter sets 125.1738, 125.1737, and 125.1790\u003c\/li\u003e\n\u003cli\u003eEnables perfectly centered holes for washers and ring blanks\u003c\/li\u003e\n\u003cli\u003eNylon construction for precise, non-marring fit within cutter holes\u003c\/li\u003e\n\u003cli\u003eCovers a range from 1\/2\" to 1\" in five incremental steps\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eContents\u003c\/th\u003e\n\u003ctd\u003eSet of 5 nylon centering dies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize Range\u003c\/th\u003e\n\u003ctd\u003e1\/2\" – 1\" (12.6 mm – 25.3 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eNylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eIndia\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1\/2\" (12.6 mm) centering die\u003c\/li\u003e\n\u003cli\u003e5\/8\" (15.8 mm) centering die\u003c\/li\u003e\n\u003cli\u003e3\/4\" (18.9 mm) centering die\u003c\/li\u003e\n\u003cli\u003e7\/8\" (22.1 mm) centering die\u003c\/li\u003e\n\u003cli\u003e1\" (25.3 mm) centering die\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cp\u003eThese centering dies are designed to fit the V-Line disk cutter 125.1734 and are also compatible with Otto Frei inch-sized disc cutter sets 125.1738, 125.1737, and 125.1790 for holes ranging from 1\/2\" to 1\".\u003c\/p\u003e","brand":"Value Line","offers":[{"title":"Default Title","offer_id":43586844819670,"sku":"125.1794","price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/nylon-center-positioning-dies-for-disc-cutting-set-of-five-12-to-1-otto-frei.jpg?v=1719955762"},{"product_id":"swiss-made-replacement-punches-disc-cutter-125-137-5mm-8-5mm","title":"Closeout Replacement Punches for Swiss Made Disk Cutter 125.137","description":"\u003cp\u003eGenuine Swiss Made replacement punches for the discontinued Swiss Made Disc Cutter Set 125.137. These are closeout items — limited to stock on hand. When they're gone, they're gone for good, and some sizes have already sold out.\u003c\/p\u003e\u003cp\u003eThese metric punches are designed for the 125.137 disc cutter set and should work in any metric disc cutter.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eGenuine Swiss Made replacement punches\u003c\/li\u003e\n\u003cli\u003eDesigned for the discontinued 125.137 Swiss Made Disc Cutter Set\u003c\/li\u003e\n\u003cli\u003eMetric sizing compatible with metric disc cutters\u003c\/li\u003e\n\u003cli\u003eCloseout stock — limited availability\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAvailable Options\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e125.137-5MM\u003c\/td\u003e\n\u003ctd\u003e5.0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e125.137-7MM\u003c\/td\u003e\n\u003ctd\u003e7.0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e125.137-7.5MM\u003c\/td\u003e\n\u003ctd\u003e7.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e125.137-8MM\u003c\/td\u003e\n\u003ctd\u003e8.0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e125.137-8.5MM\u003c\/td\u003e\n\u003ctd\u003e8.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eNotes\u003c\/h3\u003e\u003cp\u003eThese are closeout items sold as individual replacement punches. Stock is extremely limited, and certain sizes may already be sold out. No reorders will be available once current inventory is depleted.\u003c\/p\u003e","brand":"Otto Frei","offers":[{"title":"5.0mm","offer_id":47551729959126,"sku":"125.137-5MM","price":30.0,"currency_code":"USD","in_stock":true},{"title":"7.5mm","offer_id":47551730024662,"sku":"125.137-7.5MM","price":30.0,"currency_code":"USD","in_stock":true},{"title":"7.0mm","offer_id":47551729991894,"sku":"125.137-7MM","price":30.0,"currency_code":"USD","in_stock":true},{"title":"8.5mm","offer_id":47551730090198,"sku":"125.137-8.5MM","price":30.0,"currency_code":"USD","in_stock":true},{"title":"8.0mm","offer_id":47551730057430,"sku":"125.137-8MM","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/closeout-replacement-punches-for-swiss-made-disk-cutter-125-137-otto-frei.jpg?v=1719955353"},{"product_id":"durston-1216-oval-disc-cutter-set-large","title":"Durston 1216 Oval Disc Cutter Set of 6 Discs-Large Sizes","description":"\u003cp\u003eThis large oval disc cutter set offers six carefully graded oval punches for pendants, statement earrings, and focal pieces, with shear-style cutting edges that drive cleanly through metal for confident, repeatable cuts.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMetric-graded oval disc cutter set with six larger punch sizes for bold jewelry components.\u003c\/li\u003e\n\u003cli\u003eInnovative angled shear-style cutting edges for smoother cutting action and cleaner edges.\u003c\/li\u003e\n\u003cli\u003eEngineered for non-ferrous jewelry metals and suitable for both hammer and press use.\u003c\/li\u003e\n\u003cli\u003eWorks with rawhide or brass mallets, or a hydraulic press for reduced wear and longer tool life.\u003c\/li\u003e\n\u003cli\u003eSupplied with support accessories to aid alignment, cushioning, and basic maintenance.\u003c\/li\u003e\n\u003cli\u003eBuilt for regular use in professional studios, schools, and serious home workshops.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePunch Count\u003c\/td\u003e\n\u003ctd\u003e6 oval punches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePunch Size Range\u003c\/td\u003e\n\u003ctd\u003e20 × 12 mm to 30 × 22 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIndividual Punch Sizes\u003c\/td\u003e\n\u003ctd\u003e20 × 12 mm; 20 × 15 mm; 22 × 16 mm; 24 × 15 mm; 24 × 18 mm; 30 × 22 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApprox. Inch Equivalents*\u003c\/td\u003e\n\u003ctd\u003e13\/16\" × 15\/32\" up to 1-3\/16\" × 5\/8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended Max Thickness (hammer use)\u003c\/td\u003e\n\u003ctd\u003eUp to 18 gauge non-ferrous metals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended Max Thickness (hydraulic press)\u003c\/td\u003e\n\u003ctd\u003eUp to 8 gauge non-ferrous metals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended Metals\u003c\/td\u003e\n\u003ctd\u003eCopper, silver, gold, brass, nickel silver (non-ferrous)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting Edge Style\u003c\/td\u003e\n\u003ctd\u003eAngled shear-style cutting edges\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eDurston\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e*Inch sizes are approximate; metric sizes are exact.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eItem\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003cth\u003eQty\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOval disc cutter body\u003c\/td\u003e\n\u003ctd\u003eDisc cutter block for large oval punches\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOval punches\u003c\/td\u003e\n\u003ctd\u003eMetric-calibrated oval punches (20 × 12 mm to 30 × 22 mm)\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStamping pad\u003c\/td\u003e\n\u003ctd\u003eSupport pad to place beneath the cutter in use\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShims\u003c\/td\u003e\n\u003ctd\u003eShims for supporting material and maintaining alignment\u003c\/td\u003e\n\u003ctd\u003eSet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting lubricant\u003c\/td\u003e\n\u003ctd\u003eLubricant for punch cutting edges\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHex key\u003c\/td\u003e\n\u003ctd\u003eFor adjustments and basic maintenance\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eFor best results, place the disc cutter on a rubber or high-durometer urethane pad, lightly lubricate the punch edges, and strike with a suitable brass or rawhide mallet—never a nail-driving hammer. Always support the opposite side of the cutter with a similar sheet of metal to help keep the plates aligned and reduce sticking. Do not exceed the recommended thickness, only cut soft non-ferrous metals, and store the tool lightly lubricated in a dry location to help prevent rust and extend cutter life.\u003c\/p\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":44029391864022,"sku":"125.1795","price":469.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-1216-oval-disc-cutter-set-of-6-discs-large-sizes-otto-frei-1.jpg?v=1719954324"},{"product_id":"durston-1218-oval-disc-cutter-set-8-discs-small-sizes","title":"Durston 1218 Oval Disc Cutter Set of 8 Discs-Small Sizes","description":"\u003cp\u003eThis small oval disc cutter set provides eight precisely sized oval punches for charms, pendants, and accent components, with shear-style cutting edges that help each blow translate into a clean, confident cut.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSet of eight oval punches in a compact size range for detailed jewelry work.\u003c\/li\u003e\n\u003cli\u003eInnovative angled shear-style cutting edges for smoother cutting action and cleaner edges.\u003c\/li\u003e\n\u003cli\u003eEngineered specifically for non-ferrous jewelry metals used at the bench.\u003c\/li\u003e\n\u003cli\u003eSuitable for use with rawhide or brass mallets, or in a hydraulic press for extended tool life.\u003c\/li\u003e\n\u003cli\u003eIncludes support accessories to assist with alignment, lubrication, and protection of the tool during use.\u003c\/li\u003e\n\u003cli\u003eDurable construction intended for frequent use in professional studios and classrooms.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePunch Count\u003c\/td\u003e\n\u003ctd\u003e8 oval punches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePunch Size Range\u003c\/td\u003e\n\u003ctd\u003e8 × 6 mm to 18 × 16 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIndividual Punch Sizes\u003c\/td\u003e\n\u003ctd\u003e8 × 6 mm, 10 × 8 mm, 12 × 10 mm, 14 × 10 mm, 16 × 12 mm, 16 × 14 mm, 18 × 13 mm, 18 × 16 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApprox. Inch Equivalents*\u003c\/td\u003e\n\u003ctd\u003e5\/16\" × 1\/4\" to 3\/4\" × 5\/8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended Max Thickness (hammer use)\u003c\/td\u003e\n\u003ctd\u003eUp to 18 gauge non-ferrous metals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended Max Thickness (hydraulic press)\u003c\/td\u003e\n\u003ctd\u003eUp to 8 gauge non-ferrous metals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended Metals\u003c\/td\u003e\n\u003ctd\u003eCopper, silver, gold, brass, nickel silver (non-ferrous)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting Edge Style\u003c\/td\u003e\n\u003ctd\u003eAngled shear-style cutting edges\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eDurston\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e*Inch sizes are approximate equivalents; metric sizes are exact.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eItem\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003cth\u003eQty\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOval disc cutter body\u003c\/td\u003e\n\u003ctd\u003eDisc cutter block for small oval punches\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOval punches\u003c\/td\u003e\n\u003ctd\u003eMetric-calibrated oval punches (set of 8)\u003c\/td\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStamping pad\u003c\/td\u003e\n\u003ctd\u003eSupport pad for use under the cutter\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShims\u003c\/td\u003e\n\u003ctd\u003eShims for supporting material and maintaining alignment\u003c\/td\u003e\n\u003ctd\u003eSet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting lubricant\u003c\/td\u003e\n\u003ctd\u003eLubricant for punch cutting edges\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHex key\u003c\/td\u003e\n\u003ctd\u003eFor adjustments and maintenance of the cutter\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eFor best performance, place the disc cutter on a rubber or high-durometer urethane pad, lightly lubricate the punch edges, and strike with a suitable brass or rawhide mallet—never a nail-driving hammer. Support the opposite side of the cutter with a similar sheet of metal to help keep the plates aligned and reduce sticking. Do not exceed the recommended metal thickness, and store the cutter lightly lubricated in a dry location to help prevent rust and extend tool life.\u003c\/p\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":44029392486614,"sku":"125.1796","price":645.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-1218-oval-disc-cutter-set-of-8-discs-small-sizes-otto-frei-1.jpg?v=1719954319"},{"product_id":"durston-1219-heart-disc-cutter-set-10mm-25mm","title":"Durston 1219 Heart Disc Cutter Set of 5 Discs","description":"\u003cp\u003eThis heart disc cutter set provides five precision heart punches in a practical size range for charms, pendants, and accent components, with shear-style edges that cut cleanly so each strike feels efficient and controlled.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSet of five heart-shaped punches in metric-calibrated sizes for consistent, repeatable blanks.\u003c\/li\u003e\n  \u003cli\u003eAngled shear-style cutting edges designed for smoother cutting action and cleaner edges.\u003c\/li\u003e\n  \u003cli\u003eEngineered specifically for non-ferrous jewelry metals commonly used at the bench.\u003c\/li\u003e\n  \u003cli\u003eDesigned to work with rawhide or brass mallets, or in a hydraulic press for extended tool life.\u003c\/li\u003e\n  \u003cli\u003eIncludes support accessories to help align, lubricate, and protect the cutter during use.\u003c\/li\u003e\n  \u003cli\u003eDurable construction intended for frequent use in professional studios and teaching environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n    \u003cth\u003eDetail\u003c\/th\u003e\n    \u003cth\u003eValue\u003c\/th\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003ePunch Count\u003c\/td\u003e\n    \u003ctd\u003e5 heart punches\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003ePunch Size Range\u003c\/td\u003e\n    \u003ctd\u003e10–25 mm (approx. 3\/8\"–1\")\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eIndividual Punch Sizes\u003c\/td\u003e\n    \u003ctd\u003e\n      10 x 10 mm (3\/8\" x 3\/8\")\u003cbr\u003e\n      12 x 12 mm (1\/2\" x 1\/2\")\u003cbr\u003e\n      16 x 16 mm (5\/8\" x 5\/8\")\u003cbr\u003e\n      20 x 20 mm (3\/4\" x 3\/4\")\u003cbr\u003e\n      25 x 25 mm (1\" x 1\")\n    \u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eRecommended Metal Thickness (hammer use)\u003c\/td\u003e\n    \u003ctd\u003eUp to 18 gauge non-ferrous metals\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eRecommended Metal Thickness (hydraulic press)\u003c\/td\u003e\n    \u003ctd\u003eUp to 8 gauge non-ferrous metals\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eRecommended Metals\u003c\/td\u003e\n    \u003ctd\u003eCopper, silver, gold, brass, nickel silver (non-ferrous)\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eRecommended Hammers\u003c\/td\u003e\n    \u003ctd\u003e1–2 lb brass mallets or rawhide mallets\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eCutting Edge Style\u003c\/td\u003e\n    \u003ctd\u003eAngled shear-style cutting edges\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eBrand\u003c\/td\u003e\n    \u003ctd\u003eDurston\u003c\/td\u003e\n  \u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n    \u003cth\u003eItem\u003c\/th\u003e\n    \u003cth\u003eDescription\u003c\/th\u003e\n    \u003cth\u003eQty\u003c\/th\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eHeart disc cutter body\u003c\/td\u003e\n    \u003ctd\u003eDisc cutter block for heart punches\u003c\/td\u003e\n    \u003ctd\u003e1\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eHeart punches\u003c\/td\u003e\n    \u003ctd\u003e10, 12, 16, 20, 25 mm heart punches\u003c\/td\u003e\n    \u003ctd\u003e5\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eStamping pad\u003c\/td\u003e\n    \u003ctd\u003eCustom pad to support the cutter during use\u003c\/td\u003e\n    \u003ctd\u003e1\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eShims\u003c\/td\u003e\n    \u003ctd\u003eShims to support material and maintain alignment\u003c\/td\u003e\n    \u003ctd\u003eSet\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eCutting lubricant\u003c\/td\u003e\n    \u003ctd\u003eLubricant for punch cutting edges\u003c\/td\u003e\n    \u003ctd\u003e1\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eHex key\u003c\/td\u003e\n    \u003ctd\u003eFor adjustments and maintenance of the cutter\u003c\/td\u003e\n    \u003ctd\u003e1\u003c\/td\u003e\n  \u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eFor best performance, place the disc cutter on a rubber or urethane pad, lightly lubricate the punch edges, and strike with a suitable brass or rawhide mallet—never a nail-driving hammer. Always support the opposite side of the cutter with a similar sheet of metal to help keep the plates aligned and reduce sticking.\u003c\/p\u003e\n\u003cp\u003eDo not exceed the recommended metal thickness, only cut soft non-ferrous metals, and store the cutter lightly lubricated in a dry location to help prevent rust and extend tool life.\u003c\/p\u003e\n","brand":"Durston","offers":[{"title":"Default Title","offer_id":44029392748758,"sku":"125.1797","price":531.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-1219-heart-disc-cutter-set-of-5-discs-otto-frei-1.jpg?v=1719954319"},{"product_id":"replacement-handle-disc-cutter-set-10-piece-125-1790-previous-generation","title":"Handle Only-Disc Cutter Set of 10-1\/8\" to 1-1\/4\"","description":"\u003cp\u003eReplacement handle for the \u003cstrong\u003eprevious generation of item 125.1790\u003c\/strong\u003e, the Disc Cutter Set of 10 (1\/8\" to 1-1\/4\"). Note that the current generation of 125.1790 has been redesigned and no longer uses this handle. This replacement handle may fit other similar disc cutters that use a comparable handle design, \u003cstrong\u003ebut compatibility is not guaranteed.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOtto Frei stocks this replacement handle by customer request, as handles on disc cutter sets can be accidentally broken by a misdirected hammer blow. If you own the previous-generation set and need a replacement, this is the part to order.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for the previous generation of the 10-piece disc cutter set (1\/8\" to 1-1\/4\")\u003c\/li\u003e\n\u003cli\u003eStocked as a replacement part for handles damaged by misdirected hammer blows\u003c\/li\u003e\n\u003cli\u003eMay fit other similar disc cutters with a comparable handle design — fitting not guaranteed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDisc Cutter Usage Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eUse a cutting lubricant, such as Stay Sharp, to lubricate the cutting edges of the punch before use.\u003c\/li\u003e\n\u003cli\u003eUse a suitable mallet only — never a nail-driving hammer. A brass mallet is recommended.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlways support the opposite side of the cutter with a sheet of metal of the same diameter as the material you are cutting.\u003c\/strong\u003e This keeps the upper and lower parts of the disc cutter in alignment and minimizes material sticking.\u003c\/li\u003e\n\u003cli\u003eDo not exceed the maximum thickness recommended for your disc cutter.\u003c\/li\u003e\n\u003cli\u003eOnly cut soft, non-ferrous metals such as brass, copper, silver, and gold.\u003c\/li\u003e\n\u003cli\u003eEnsure cutting edges are facing down before striking.\u003c\/li\u003e\n\u003cli\u003eTo prevent rust, keep your disc cutter lubricated between uses and store in a dry location.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eThis handle is intended for the \u003cem\u003eprevious generation\u003c\/em\u003e of item 125.1790 only. The current generation of 125.1790 has been redesigned and is not compatible with this handle. Compatibility with other disc cutter brands or models is not guaranteed.\u003c\/p\u003e","brand":"Value Line","offers":[{"title":"Default Title","offer_id":44274735907030,"sku":"125.1790H","price":11.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/handle-only-disc-cutter-set-of-10-18-to-1-14-otto-frei-1.jpg?v=1719954181"},{"product_id":"durston-1235-star-shaped-disc-cutter-10-piece","title":"Durston 1235 Star Shaped Disc Cutter","description":"\u003cp\u003eThe Durston 1235 Star Shaped Disc Cutter is a professional-grade cutting set designed for jewelers and metalsmiths who need clean, precise star-shaped blanks. Unlike hand-tighten disc cutters, this set features an Allen key clamping system that locks your material firmly in place before each cut, eliminating movement and ensuring crisp, clean results every time. The set includes levelling shims for a complete, workshop-ready disc cutting solution right out of the box.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAllen key clamping system for a secure, movement-free hold during cutting\u003c\/li\u003e\n\u003cli\u003e10 star-shaped punches in a graduated size range\u003c\/li\u003e\n\u003cli\u003eUrethane pad included for shock absorption\u003c\/li\u003e\n\u003cli\u003eDurston lubricant and levelling shims included\u003c\/li\u003e\n\u003cli\u003eDedicated storage tray keeps all components organized\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSet Contents\u003c\/th\u003e\n\u003ctd\u003e10-piece star-shaped punch set\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePunch Sizes\u003c\/th\u003e\n\u003ctd\u003e6mm, 8mm, 10mm, 12mm, 15mm, 18mm, 20mm, 23mm, 26mm, 30mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall Dimensions\u003c\/th\u003e\n\u003ctd\u003e8-3\/4\" x 7\" x 2\" (220mm x 180mm x 150mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Material Thickness\u003c\/th\u003e\n\u003ctd\u003e1mm for non-ferrous metals; 0.5mm for the three smallest punches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eClamping Method\u003c\/th\u003e\n\u003ctd\u003eAllen key tightening\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e10 star-shaped punches (6mm, 8mm, 10mm, 12mm, 15mm, 18mm, 20mm, 23mm, 26mm, 30mm)\u003c\/li\u003e\n\u003cli\u003eAllen key\u003c\/li\u003e\n\u003cli\u003eUrethane pad\u003c\/li\u003e\n\u003cli\u003eDurston lubricant\u003c\/li\u003e\n\u003cli\u003eLevelling shims\u003c\/li\u003e\n\u003cli\u003eStorage tray\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum recommended material thickness is 1mm for non-ferrous metals.\u003c\/strong\u003e For the three smallest punches (6mm, 8mm, 10mm), do not exceed 0.5mm material thickness to ensure clean cuts and protect the punches.\u003c\/p\u003e","brand":"Durston","offers":[{"title":"Default Title","offer_id":46065993744598,"sku":"125.1235","price":509.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/durston-1235-star-shaped-disc-cutter-otto-frei-1.jpg?v=1726697864"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/collections\/disc-cutters-and-hole-punching-otto-frei_b7072f17-c1c3-4e7e-8e3c-3c3906387a78.jpg?v=1726692523","url":"https:\/\/www.ottofrei.com\/ja\/collections\/disc-cutters-hole-punches-jewelry.oembed","provider":"Otto Frei","version":"1.0","type":"link"}