GRS 044-504 C-Max Burin Graver & Handle Kit

The GRS 044-504 C-Max Burin Graver & Handle Kit is a complete hand engraving solution built around GRS C-Max tungsten carbide — a premium carbide grade engineered to hold a razor-sharp edge far longer than conventional graver materials. This burin is designed specifically for hand engraving, with a particular focus on intaglio printmaking. Whether you are an experienced engraver or picking up a graver for the first time, this kit delivers a ready-to-use tool that is precision-ground and immediately functional straight out of the box.

The burin blank measures 0.125" (3.17mm) in diameter and approximately 3" (75mm) in length. Two ground reference surfaces on the top front of the burin form a 90° square edge, providing a consistent clamping surface compatible with most GRS sharpening fixtures for accurate resharpening. The front face is ground at a 35° face angle, with a 15° relief face behind it. Both sides of the burin are thinned with a 2.5° relief surface ground approximately 0.6" (15mm) long, reducing drag and improving cutting performance.

The heel features two flat ground surfaces approximately 0.25" (6mm) long at a 12° elevation angle, forming a 100° included V-point — creating a slightly wider point than a traditional square graver for enhanced control and versatility.

The included GRS adjustable graver handle allows you to dial in your preferred burin extension length. Simply loosen the two set screws, slide the burin to the desired position, and re-tighten. Because C-Max carbide is extremely hard, it requires a diamond abrasive for sharpening — standard abrasive wheels are not suitable for this material.

Features

• C-Max tungsten carbide graver blank with exceptional edge retention
• Optimized for hand engraving and intaglio printmaking
• 0.125" (3.17mm) diameter round blank, approximately 3" (75mm) long
• Two ground reference surfaces forming a 90° square edge for sharpening fixture compatibility
• 35° front face angle with 15° relief face behind
• 2.5° side relief surfaces ground approximately 0.6" (15mm) long on both sides
• Heel: two flat surfaces at 12° elevation, forming a 100° included V-point
• Adjustable graver handle with two set screws for custom burin length positioning
• Ready to use out of the box — no additional grinding required
• Requires diamond abrasive for resharpening (not included)

Specifications

What's Included

• C-Max Burin Tungsten Carbide Graver
• Adjustable Graver Handle
• Allen Wrench

Notes

• C-Max tungsten carbide can only be sharpened using diamond abrasives such as GRS diamond wheels used with the Power Hone system; standard abrasive wheels will not sharpen this material.
• Use a wine cork or similar protective cap to cover the tip when the burin is not in use.
• This product contains cobalt. See California Proposition 65 warnings for applicable health information.