Badeco 318 Combi Hammer Handpiece for MX Micromotors

An impact handpiece drives a tip in short hammer strokes at the bench, letting a setter raise beads, tighten bezels and texture metal with repeatable force. The Badeco 318 Combi Hammer Handpiece is a professional-grade impact handpiece for the Badeco MX series control boxes and the M4 ASF control box, powered by the Badeco RS2000 micromotor, and it delivers medium to hard impact strokes with hands-on control over stroke strength.

The Combi name reflects the two operating modes, selected with the left-side toggle switch on the MX-4 series control box. In hand use mode, the impact strokes run continuously at a fixed speed set by the center speed control dial. In foot control mode, the handpiece delivers a single stroke each time the foot control is pressed, which suits deliberate placement of every impact. In both modes, the impact strength is adjusted independently by twisting the impact controller ring on the handpiece body.

One non-hardened tip is included with the handpiece.

Features

• Two operating modes: continuous hand-use mode and single-stroke foot control mode
• Impact stroke strength adjusted with the impact controller ring on the handpiece
• Speed set from the center speed dial on the MX-4 series control box
• Produces medium to hard impact strokes
• Includes one non-hardened tip

Compatibility

• Badeco MX series control boxes and the M4 ASF control box
• Powered by the Badeco RS2000 micromotor
• Mode switching uses the left-side toggle switch on the MX-4 series control box