EarthCoat ElectroKing Electrocleaning Concentrate Powder (2 lb Container)

EarthCoat ElectroKing Electrocleaning Concentrate Powder is a versatile soak cleaner and electrocleaner formulated for jewelry and industrial substrates. Mix the powder concentrate with water and clean by simple immersion or by electrocleaning with a rectifier. Effective on common shop soils and compatible with a wide range of metals used in jewelry fabrication and plating lines.

Features

• Dual-mode use: immersion soak cleaning or electrocleaning with a rectifier
• Economical powder concentrate — easy to mix, make up, and maintain
• Compatible with white metal, copper, brass, steel, silver, gold, bronze, nickel, and zinc
• Sold in a 2 lb (0.91 kg) container

Specifications

Basic Setup

1. Heat water to approximately 140 °F (60 °C), then add the measured ElectroKing powder and stir until fully dissolved.
2. For electrocleaning, connect the workpiece negative (–) and the stainless steel anode positive (+); clean for 15–60 seconds at 2–6 volts.
3. For soak cleaning without a rectifier, immerse parts for 1–5 minutes at 140 °F (60 °C).
4. Rinse thoroughly after cleaning before proceeding to activation or plating.

Notes

• Use in a well-ventilated area. Wear gloves, safety goggles, and a protective apron.
• Do not add powder to water heated above 140 °F (60 °C).
• Avoid prolonged skin contact.
• Do not mix with Activator-T below 100 °F (32 °C).