コンテンツにスキップ
Foredom による

Foredom K.2230 フレックスシャフトキット H.30 ハンドピース・43点アクセサリーキット付き - 230V

Part # K.2230-2 In Stock Weight <0.1 lb / <5 g
Limited time deal-15%
Current price $438.46
List Price: $515.83

Availability 完売

Add to wishlist to get notified when back in stock. We'll email you when it's back in stock. That didn't save. Try again. Ask us when it's due back: [email protected]

Description

220V / 240V supply only. This unit requires higher-voltage supply (220V / 240V). Plugging it into a standard North American 110V / 120V outlet will prevent it from running properly. Confirm your outlet voltage before powering on. Learn more
Not sure this is the right kit? Compare every Foredom motor, speed control and handpiece we stock, 357 combinations priced as you pick. Build your kit

Foredom K.2230フレックスシャフトキットは、クラシックな230V吊り下げ式セットアップを作業台に導入します。1/6 HPの正逆回転対応M.SR-2モーター、C.FCH-2フットスピードコントロール、汎用性の高いH.30調整式チャックハンドピース、バー、ブラシ、研磨アクセサリーを含む43点のAK11アクセサリーキットがセットになっています。これ1つで、箱から出してすぐに作業を始められます。

電源とプラグ:アダプターが必要

230V専用。NEMA 5-15タイプのプラグには、お使いの国に適した230Vプラグアダプターが必要です。110/120Vのコンセントには接続しないでください。このキットは230V専用です。 C.FCH-2コントロールのコード先端には、北米で一般的な形状のNEMA 5-15タイプのプラグが付いているため、お使いのコンセントに合ったプラグアダプターが必要です。このキットを標準的な110/120Vコンセントに絶対に接続しないでください。 プラグは差し込めますが、モーターとコントロールに対して電圧が適切ではありません。

特長

  • Foredom M.SR-2モーター:1/6 HP、最大18,000 RPM、正逆回転対応、230V
  • スムーズで全域にわたる速度調整が可能なC.FCH-2フットスピードコントロール(230V)
  • チャックキー付きH.30調整式Jacobsチャックハンドピース。最大5/32インチ(4 mm)のシャンクを持つアクセサリーに対応
  • AK11アクセサリーキット:すぐに作業を始められるバー、ブラシ、研磨アクセサリー43点
  • SRシリーズモーターには、Foredomおよび他メーカーのクイックディスコネクト式ハンドピースに対応する標準キー先端フレックスシャフトとシースが付属
  • ボールベアリング構造により、通常の負荷がかかっても停止することなく安定した出力を発揮
  • モーターの回転方向を切り替え可能。左利きのユーザーに便利で、研磨材の寿命を延ばし、左右対称の研削を助け、研磨作業を速め、詰まったドリルビットを抜きやすくします
  • すべてのForedomモーターに2年間の保証付き

注意事項

  • 注意:取り付けられていない研磨ホイールにねじ込み式マンドレルを使用する場合、逆回転によってマンドレルが緩む可能性があります。逆回転で使用する場合は、あらかじめ取り付けられた研磨ホイールのみを使用してください。

Specifications

Brand
Foredom
Part #
K.2230-2
Type
ロータリーツール
Country of Origin
United States
Voltage
220V / 240V
Dimensions
19 in x 13 in x 4 in
Motor Series
M.SR-2 hang-up flex shaft motor
Motor Power
1/6 HP
Maximum Speed
Up to 18,000 RPM (variable with foot control)
Rotation
Forward and reverse
Bearing Type
Ball bearing motor
Voltage
230 V
Plug Style
NEMA 5-15 style; country-appropriate 230 V plug adapter required (not included)
Speed Control
C.FCH-2 foot-operated speed control, 230 V
Handpiece
H.30 adjustable Jacobs chuck handpiece with chuck key
Accessory Kit
AK11 43-piece assortment of burs, brushes and polishing accessories
Flexible Shaft
Standard key-tip shaft and sheath
Brand
Foredom

What's Included

What's Included

Everything in the box.

Component Description
Motor Foredom M.SR-2 motor, 1/6 HP, reversible, up to 18,000 RPM (230V), with standard key-tip flexible shaft and sheath
Speed Control Foredom C.FCH-2 foot speed control in plastic housing (230V), NEMA 5-15 style plug; a country-appropriate 230 V plug adapter is required and not included
Handpiece Foredom H.30 adjustable Jacobs chuck handpiece with chuck key
Accessory Kit Foredom AK11 accessory kit: a 43-piece assortment of burs, brushes and polishing accessories

Documents

California Prop 65 Warning California Prop 65 Warning:
This product can expose you to acrylonitrile, carbon black, lead, and butadiene, which are known to cause cancer and reproductive harm. www.P65warnings.ca.gov.

Reviews

No reviews yet. Be the first to share your experience with this product.

Write a review ↓