Quatro F074 HEPA Filter

A HEPA stage is what keeps polishing, soldering, and finishing dust out of the shop air instead of returning it to the bench. The Quatro F074-R2 is a replacement HEPA filter designed for use across several Quatro dust collection units. Depending on the unit, it functions as either a first-stage or third-stage filter, making it a critical component in maintaining effective dust and particulate capture.

One side of the filter is edged with a small foam gasket to ensure a proper seal within the housing. The filter measures 15" wide × 12" long × 1-7/8" thick when new, and the foam compresses with use.

Features

• Genuine Quatro replacement HEPA filter (model F074-R2)
• Functions as the 1st-stage filter in the CollectAll and Solder Pure units
• Functions as the 3rd-stage filter in the Quatro Single Sided Polishing Unit and earlier-model Stand Up Dust Collectors
• Compatible with Stand Up Dust Collectors with serial numbers 18063 and lower
• Foam-lined outer edge on one side for a secure, sealed fit

Compatibility

• CollectAll: 1st-stage filter
• Solder Pure: 1st-stage filter
• Single Sided Polishing Unit: 3rd-stage filter
• Stand Up Dust Collectors, serial numbers 18063 and lower: 3rd-stage filter

Notes

Current-model Stand Up Dust Collectors with serial numbers 18064 and above require HEPA filter F022 (part 147.626C), not the F074. Verify your unit's serial number before ordering.