Quatro SPB-560-1T-K SolderPure Combo Solder/Rhodium Fume Extractor-110V

Capture both soldering smoke and rhodium plating fumes from one bench station without running ductwork. The Quatro SPB-560-1T-K SolderPure Combo is a dual-purpose fume extractor engineered for jewelers and repair technicians who perform both soldering and rhodium plating operations at the same workstation. Part of the Quatro SolderPure line, this combination SWS/RP (Solder/Waxing/Smoke, Rhodium/Plating) unit captures fumes at the source before they can circulate through your workspace. With 125 CFM airflow, a 3-stage filtration system, and quiet 52 dBA operation, it delivers professional-grade air quality without requiring external venting.

Features

• Dual-purpose combination unit for solder, waxing, smoke, and rhodium/plating fume removal
• 3-stage filtration: Dust pre-filter, then HEPA, then dual charcoal
• No external venting required, with 99.9% efficient fume and odor removal
• Quiet operation at approximately 52 dBA
• Two top inlet ports to service up to two fume extraction stations simultaneously
• Mounted on casters for easy shop mobility
• Refillable dual charcoal filters, one for rhodium/plating and one for solder/wax

Compatibility

Filter stages and their replacement part numbers:

Refillable charcoal filters can be replenished using the following materials, and each refill package provides enough material for five refills:

• Solder/Wax Charcoal Refill, Part # 147.628D
• Rhodium/Plating Charcoal Refill, Part # 147.629D

Notes

What you get:

• Quatro SPB-560-1T-K Combo SolderPure unit with installed filters
• Quatro AA006 Flexible Extraction Arm with 3" Slide Valve (Part # 147.631E)
• Quatro M041 Table Bracket for 3" hose (Part # 147.6006)
• 3" diameter fume hose (8 ft) with clamps
• Airflow on the combo unit is 125 CFM, lower than single-filter models (170 CFM) because of the dual charcoal filter configuration.
• Recommended when both soldering and rhodium/plating fumes must be captured from the same workstation.
• A second inlet port is available for a second extraction arm; cap any unused inlet during operation.
• Optional accessories include an additional extraction arm (AA006 / 147.631E), a complete arm and bracket kit (AA008 / 147.631), a foot pedal on/off control (AA175 / 147.640), and an mc2 automatic control box (147.633).