Sterling Silver Hammered Wire 4.0mm x 1.5mm 12" Lengths

Set decorative borders, band stock and surface accents at the bench with a flat pattern wire that arrives straight and ready to cut.

Sterling silver hammered flat wire carries a hammered texture across the top surface and a smooth, plain finish on the flat bottom. It measures 4.0 mm wide by 1.5 mm thick and weighs roughly 0.59 oz per foot, sold by the piece in pre-straightened 12 inch lengths.

Harmony makes this wire in the USA from 100% recycled, non-mined sterling silver reclaimed from jewelry, silverware, coins, precious metals and dental scrap, a responsible choice for the eco-conscious jeweler or metalsmith.

Features

• Hammered decorative pattern on the top surface
• Smooth, plain finish on the flat bottom side
• 4.0 mm wide by 1.5 mm thick, weighing about 0.59 oz per foot
• Made in the USA from 100% recycled, non-mined sterling silver
• Recycled sources include reclaimed jewelry, silverware, coins, precious metals and dental scrap
• Sold by the piece in pre-straightened 12 inch lengths

Notes

The hammered pattern is applied to the top surface only; the reverse stays flat and plain, so the wire seats cleanly against a bezel, a band or a sheet.