{"product_id":"grs-004-872-1-8mm-round-quick-change-qc-tool-holder","title":"GRS 004-872 1.8mm Round Quick Change \"QC\" Tool Holders-Sold by the Piece","description":"\u003cp\u003eThe GRS 004-872 is a 1.8mm round hole Quick Change (QC) tool holder, sold individually, designed specifically to hold 1.8mm round shank gravers. Unlike traditional QC tool holders that use two hex screws and feature a 0.136\" (3.45mm) inside diameter hole, this holder is secured by a single hex screw — the correct configuration for reliably retaining the smaller 1.8mm shank diameter. The holder shaft measures 0.250\" (6.32mm) in diameter, consistent with all GRS QC tool holders, and is 1\" in standard length.\u003c\/p\u003e\n\u003cp\u003eThis holder is designed for use with the GRS quick change handle (part number 104.805) or any GRS quick change handpiece, including the QC Magnum, QC Monarch, and QC 901.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSingle hex screw retention — engineered specifically for 1.8mm round shank gravers\u003c\/li\u003e\n\u003cli\u003e1.8mm round hole accommodates 1.8mm diameter graver shanks securely\u003c\/li\u003e\n\u003cli\u003e0.250\" (6.32mm) diameter shaft — standard across all GRS QC tool holders\u003c\/li\u003e\n\u003cli\u003e1\" standard length\u003c\/li\u003e\n\u003cli\u003eCompatible with GRS quick change handle 104.805 and all GRS QC handpieces\u003c\/li\u003e\n\u003cli\u003eSold individually — purchase only what you need\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003e004-872 \/ 104.872\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHole Diameter\u003c\/th\u003e\n\u003ctd\u003e1.8mm round\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShaft Diameter\u003c\/th\u003e\n\u003ctd\u003e0.250\" (6.32mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e1\" standard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHex Screws\u003c\/th\u003e\n\u003ctd\u003e1 (single)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold As\u003c\/th\u003e\n\u003ctd\u003eEach (by the piece)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eThis holder uses \u003cem\u003eone\u003c\/em\u003e hex screw — not two — because it is designed exclusively for 1.8mm shank tools. Traditional GRS QC holders (such as 104.806) use two hex screws and have a larger 0.136\" (3.45mm) inside diameter hole. Do not attempt to use this holder with larger shank gravers. For reference, GRS offers the following QC tool holders:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e104.806\u003c\/strong\u003e – Traditional, 2 hex screws, 1\" standard length, 0.136\" (3.45mm) hole\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e104.855\u003c\/strong\u003e – 1 hex screw, 3\/32\" (2.35mm) hole, 1\" standard length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e104.875\u003c\/strong\u003e – 1 hex screw, 1\/8\" (3.18mm) hole, 1\" standard length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e104.872\u003c\/strong\u003e – 1 hex screw, 1.8mm hole, 1\" standard length (this item)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e104.870\u003c\/strong\u003e – Traditional, 2 hex screws, 1\" standard length, 0.136\" (3.45mm) hole, soft-hit (nylon ends)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e104.803SS\u003c\/strong\u003e – Stainless steel, traditional, 2 hex screws, 1\" standard length, 0.136\" (3.45mm) hole\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e111.541 Bronze\u003c\/strong\u003e – 1 hex screw, 1\/8\" (3.18mm) hole, 1\" standard length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e104.856 Extra Long\u003c\/strong\u003e – Traditional, 2 hex screws, 0.136\" (3.45mm) hole, ½\" longer than standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e104.860 Blank\u003c\/strong\u003e – Traditional, 2 hex screws, 1\" standard length, center-drilled hole\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Glendo GRS","offers":[{"title":"Default Title","offer_id":43579901837526,"sku":"104.872","price":9.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/grs-004-872-1-8mm-round-quick-change-qc-tool-holders-sold-by-the-piece-otto-frei.jpg?v=1719958393","url":"https:\/\/www.ottofrei.com\/products\/grs-004-872-1-8mm-round-quick-change-qc-tool-holder","provider":"Otto Frei","version":"1.0","type":"link"}