{"product_id":"italian-disk-cutter-set-17-2mm-18mm","title":"Italian Disk Cutter Set of 17, 2mm to 18mm (3\/32\" to 3\/4\")","description":"\u003cp\u003eThis Italian-made disk cutter set includes 17 punches ranging from 2mm to 18mm (approximately 3\/32\" to 3\/4\"), designed for professional jewelers and metalsmiths who need precise, clean round disks from soft precious and non-ferrous metals. Constructed from specially hardened tool steel with sharp cutting edges and extremely close tolerances, this set delivers consistent, accurate results across a wide range of disk sizes.\u003c\/p\u003e\n\u003cp\u003eThe set is designed for use with a mallet or hydraulic press and is suitable for cutting soft precious metals such as gold and silver up to 18 gauge thick. Copper and brass may also be cut with appropriate care. The cutter can be disassembled to help free any punches that become lodged in the cut material. Made in Italy.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e17-piece punch set covering 2mm through 18mm in 1mm increments\u003c\/li\u003e\n\u003cli\u003eConstructed from specially hardened tool steel\u003c\/li\u003e\n\u003cli\u003eSharp cutting edges with extremely close tolerances\u003c\/li\u003e\n\u003cli\u003eDisassembles for easy removal of stuck punches\u003c\/li\u003e\n\u003cli\u003eCompatible with mallet use or hydraulic press\u003c\/li\u003e\n\u003cli\u003eRound block with 6-1\/8\" diameter\u003c\/li\u003e\n\u003cli\u003eMade in Italy\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow to Use a Disk Cutter\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003ePlace the disk cutter on top of a rubber pad for support.\u003c\/li\u003e\n\u003cli\u003eApply a cutting lubricant, such as Stay Sharp, to the cutting edges of the punch.\u003c\/li\u003e\n\u003cli\u003eUse a suitable mallet—never a nail-driving hammer. Brass mallets are recommended.\u003c\/li\u003e\n\u003cli\u003eSupport the opposite side of the cutter with a sheet of the same diameter metal being cut to maintain alignment and minimize sticking.\u003c\/li\u003e\n\u003cli\u003eDo not exceed the maximum recommended material thickness for this disk cutter.\u003c\/li\u003e\n\u003cli\u003eOnly cut soft, non-ferrous metals such as brass, copper, silver, and gold.\u003c\/li\u003e\n\u003cli\u003eEnsure cutting edges are facing down before striking.\u003c\/li\u003e\n\u003cli\u003eTo prevent rust, lubricate the disk cutter between uses and store in a dry location.\u003c\/li\u003e\n\u003cli\u003eUse with a 95 durometer urethane pad to help extend the life of the cutters.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePunch Count\u003c\/th\u003e\n\u003ctd\u003e17 punches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePunch Range\u003c\/th\u003e\n\u003ctd\u003e2mm – 18mm (approximately 3\/32\" – 3\/4\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePunch Sizes\u003c\/th\u003e\n\u003ctd\u003e2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlock Diameter\u003c\/th\u003e\n\u003ctd\u003e6-1\/8\" round\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Metal Thickness\u003c\/th\u003e\n\u003ctd\u003e18 gauge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Metals\u003c\/th\u003e\n\u003ctd\u003eGold, silver, copper, brass (soft non-ferrous metals only)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSpecially hardened tool steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCountry of Origin\u003c\/th\u003e\n\u003ctd\u003eItaly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e17 hardened tool steel punches (2mm – 18mm)\u003c\/li\u003e\n\u003cli\u003e1 round cutting block (6-1\/8\" diameter)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OMO","offers":[{"title":"Default Title","offer_id":43581285531862,"sku":"125.138","price":535.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9832\/0342\/files\/italian-disk-cutter-set-of-17-2mm-to-18mm-332-to-34-otto-frei.jpg?v=1719957625","url":"https:\/\/www.ottofrei.com\/products\/italian-disk-cutter-set-17-2mm-18mm","provider":"Otto Frei","version":"1.0","type":"link"}