Vallorbe Swiss Eco Range Machinist-Engineers Files-Hand LS5510-Cuts 1-2

Vallorbe Swiss Eco Range Machinist-Engineers Files-Flat Hand LS5510


Flat Hand Machinist Files, also called equaling or pillar files, are parallel in width and thickness.  One edge is safe, meaning there is no cut on one of the narrow edges. 


Choose from 2 Lengths:
6"(150mm)
8" (200mm)

And 2 different cuts:
Bastard Cut (marked 1)
Second Cut (marked 2)

These Swiss pattern machinists files are double cut. 

Otto Frei # Vallorbe # Description

132.101-6-2  LS5510-6-2  6" Second Cut Round Eco Range Machinist Files
132.101-8-2  LS5510-8-2  8" Second Cut Round Eco Range Machinist Files

Machinist files (also called Engineers files) are made to a different standard than Jewelers Precision files. Cuts and shapes are different. A Machinist file Bastard cut (marked 1) is coarser than a jewelers file marked 1. A Machinist file will have slightly different dimensions than a Jewelers Precision file. Lengths on Machinist files are measured from the top or point of the file to the point when the tang begins to angle up to the heel. Lengths on Jewelers Precision files are measured from the top or point of the file to the point where the heel begins to angle down to the heel.