Closeout Meiji EMZ-10 Microscope With Jura by GRS Stand & LED Light

This microscope package pairs the Meiji EMZ-10 zoom microscope with the Jura by GRS fixed-position stand and an LED ring/spot light to create a stable, repeatable micro stone setting workstation. It is the configuration recommended by Jura for use on a Jura bench or similar jeweler's workbench.

Features

• Purpose-built for micro stone setting: The Jura by GRS stand uses fixed-position geometry to keep working angles constant throughout a session.
• Flexible mounting: The newest version of the Jura by GRS stand can be bench-top mounted or wall mounted.
• Set-and-forget adjustment: Position is set via two set-screw points—once dialed in, no frequent repositioning is required.
• 0× protective lens: Used in place of an auxiliary lens to preserve optical performance while protecting the objective and maintaining the standard 110 mm working distance.
• Wide zoom range: The EMZ-10 delivers a 6.5:1 zoom ratio for fast framing from layout to fine detail inspection.
• Included LED light: Provides consistent, adjustable illumination at the work surface without requiring a separate purchase.

Specifications

*With optional auxiliary lenses; see Notes section below.

What's Included

• Meiji EMZ-10 zoom microscope body
• 10× eyepiece pair (MA502)
• 0× protective lens — protects the objective and maintains 110 mm working distance
• Jura by GRS microscope stand — bench-top or wall mount
• LED light source (129.934)

Notes

• For micro stone setting, maintain the recommended 110 mm working distance when using the included protective lens.
• If additional tool clearance is needed, an optional auxiliary lens can be used—note that greater working distance reduces maximum magnification.
• Optional auxiliary lens performance with 10× eyepieces: 0.3× yields 326 mm working distance and 2.1× – 13.5× magnification; 0.5× yields 194 mm and 3.5× – 22.5×; 0.75× yields 127 mm and 5.25× – 33.75×.
• When installing the Jura by GRS stand, set height and reach once, then lock both set screws to preserve alignment.