Skip to content
Contact Us Jewelry School Partners Frequently Asked Questions Submit Tax Exemption Quick Order
EarthCoat Black-Free Black Antique Plating Solution - Otto Frei
Cohler

EarthCoat Black-Free Black Antique Plating Solution

Part # 145.725 Only 3 left Weight -- lb / -- g
$45.00

Description

EarthCoatâ„¢ Black-Freeâ„¢ is a cyanide-free black antique plating solution that deposits a rich, easily relievable black finish on a wide range of metals. Supplied ready to use, it offers straightforward setup and consistent results, making it an operator-friendly alternative to solvent black lacquers.

Features

  • Cyanide-free and formulated to be ecologically friendlier
  • Ready-to-use bath for quick setup and reliable operation
  • Produces a deep black finish that is easily relieved for antique effects
  • Plates over tin, pewter, copper, brass, nickel, gold, sterling silver, and similar metals
  • Supplied in a 1 quart (32 oz) bottle

Specifications

Volume 1 quart (32 oz)
Finish Type Black antique
Formula Cyanide-free, ready to use
Anode Stainless steel
Operating Temperature 120–140 °F (49–65 °C)
Voltage 3–4 V
Plating Time 30 seconds – 2 minutes
pH 10–11
Polarity Work negative (–), anode positive (+)

Basic Process

  1. Heat Black-Free™ to approximately 130 °F and connect leads (work – / anode +).
  2. Plate 30–60 seconds at 3–4 V; adjust time and voltage for part size and desired darkness.
  3. Rinse, then relieve high areas with light abrasion to create the antique look.
  4. Optional: apply a clear lacquer after relieving to add sheen and protect the finish.

Notes

  • UPS or FedEx Ground only. Not eligible for postal service (USPS).
  • For orders outside the USA: ship via UPS/FedEx Collect to your carrier account.
  • This product is subject to California Proposition 65 requirements regarding nickel exposure.

Specifications

Brand
Cohler
Part #
145.725
Type
Plating Solutions
Dimensions
4 in x 4 in x 9 in
Volume
1 quart (32 oz)
Finish Type
Black antique
Formula
Cyanide-free, ready to use
Anode
Stainless steel
Operating Temperature
120–140 °F (49–65 °C)
Voltage
3–4 V
Plating Time
30 seconds – 2 minutes
pH
10–11
Polarity
Work negative (–), anode positive (+)

Documents

Specs, manuals, and certificates for this product. All files open in a new tab.

Safety Data Sheet SDS
Product Manual Manual
California Prop 65 Warning California Prop 65 Warning:
This product can expose you to chemicals including nickel, which is known to cause cancer. www.P65warnings.ca.gov.

Reviews

No reviews yet. Be the first to share your experience with this product.

Write a review ↓