Jumbo Oval Shaped Set of 2 Disc Cutters in Wood Box

The Jumbo Oval Shaped Disc Cutter Set includes two large oval punches for cutting precise oval blanks from soft precious and non-ferrous metals. Designed for jewelers and metalsmiths working at a larger scale, these cutters produce clean, accurate ovals from gold, silver, copper, brass, and nickel silver up to 20 gauge thick. Each punch is individually fitted to its matching die with extremely close tolerances, ensuring clean edges and consistent results. The set is crafted from properly hardened tool steel for durability and long-term performance and arrives stored in a wood box.

Features

• Set of 2 jumbo oval disc cutters in two sizes
• Individually fitted punches with extremely close tolerances for precise cuts
• Cutting edges are very sharp for clean, burr-minimized blanks
• Made from properly hardened tool steel
• Compatible with use by mallet or hydraulic press
• Stored in a wood box for organized, protected storage

How to Use a Disc Cutter

1. Place the disc cutter on top of a rubber pad for support.
2. Apply a cutting lubricant, such as Stay Sharp, to the cutting edges of the punch.
3. Strike with a suitable mallet—never a nail-driving hammer; a brass mallet is recommended.
4. Support the opposite side of the cutter with a sheet of the same-diameter metal being cut to maintain alignment and minimize material sticking.
5. Do not exceed the maximum recommended metal thickness for the cutter.
6. Cut soft non-ferrous metals only: brass, copper, silver, and gold.
7. Ensure cutting edges are facing down before striking.
8. To prevent rust, keep the cutter lubricated between uses and store in a dry location.
9. Use with a 95 durometer urethane pad to extend the life of the cutters.

Specifications

What's Included

• 2 jumbo oval disc cutters (28mm x 40mm and 35mm x 50mm)
• Wood storage box

California Prop 65 Warning:
Cancer and Reproductive Harm. www.P65warnings.ca.gov.