Foredom

A hang-up flex shaft motor mounts above the bench and sends rotary power down a flexible shaft to the handpiece held in your hand, so you can cut, ...

A complete bench flex shaft system for grinding, drilling, carving, and polishing, hung overhead and driven from the floor. The Foredom M.SR hang-u...

This is the classic Foredom SR hang-up setup with a dial control instead of a pedal: a 1/6 HP reversible M.SR motor, the C.EM-1 table top dial spee...

This is the Foredom SR hang-up setup with a dual speed range dial control instead of a pedal: a 1/6 HP reversible M.SR motor, the C.EMF-1 table top...

The Foredom M.SRM is the bench-mounted version of the SR flex shaft motor. Instead of hanging from a hanger with a separate control, the motor sits...

Stone setting, hammer work and other low-speed bench operations need a motor that holds torque down where the cut happens instead of running away f...

Stone setting and other close bench work want torque you can feel at a crawl rather than top end speed, with the handpiece light in your fingers an...

Stone setting, hammer work and other low-speed bench operations need a motor that holds torque down where the cut happens instead of running away f...

Stone setting, hammer work and other low-speed bench operations need a motor that holds torque down where the cut happens instead of running away f...

This flex shaft kit combines a 115V Foredom M.LX low-speed, high-torque motor with the Foredom 115V C.EMXF-1 dual speed range table top dial contro...

Stone setting, hammer work and other low-speed bench operations need a motor that holds torque down where the cut happens instead of running away f...

This flex shaft kit combines a 115V Foredom M.LX low-speed, high-torque motor with the Foredom 115V C.SXR-1 foot control in its cast iron housing a...

The Foredom M.LXM is the bench-mounted version of the LX low-speed, high-torque flex shaft motor. Instead of hanging from a hanger with a separate ...

A flex shaft motor puts rotary power in your hand at the bench, driving burs, drills, and abrasives through a flexible shaft for cutting, drilling,...

A hang-up flex shaft motor mounts above the bench and sends rotary power down a flexible shaft to the handpiece in your hand, for drilling, cutting...

Cutting, drilling and bur work at the bench need a motor that keeps pulling under load rather than stalling the moment the tool bites. This kit pai...

Cutting, drilling and bur work at the bench need a motor that keeps pulling under load rather than stalling the moment the tool bites. This kit pai...

The Foredom M.TXM is the bench-mounted version of the TX hi-torque flex shaft motor. Instead of hanging from a hanger with a separate control, the ...

This is the 230V configuration of the classic Foredom SR hang-up setup with a dial control instead of a pedal: a 1/6 HP reversible M.SR-2 motor, th...

This is the 230V configuration of the Foredom SR hang-up setup with a dual speed range dial control instead of a pedal: a 1/6 HP reversible M.SR-2 ...

This is the 230V configuration of the classic Foredom SR hang-up setup with the heavy cast iron foot control: a 1/6 HP reversible M.SR-2 motor, the...

This flex shaft kit combines a 230V Foredom M.LX-2 low-speed, high-torque motor with a Foredom 230V C.TXR-22CE electronic foot control and your cho...

This flex shaft kit combines a 230V Foredom M.LX-2 low-speed, high-torque motor with a Foredom 230V C.TXR-26 electronic foot control and your choic...

Drilling, grinding, shaping, texturing and polishing at the bench all run off one flex shaft motor and a foot control, and this kit supplies that w...

A dual handpiece micromotor system for the bench, pairing a low vibration rotary handpiece for cutting, grinding, finishing and texturing with a re...

A rotary tumbler burnishes castings, fabrication work and findings to a bright, work-hardened surface while you keep working at the bench. The Fore...

A flex shaft system for the jeweler who spends the day at the bench grinding, drilling, carving and polishing with 3/32" shank burs, the standard s...

Bead, prong and pave setting ask for high torque at very low speed, and this kit puts two setting handpieces on one motor at the bench. The Foredom...

A flex shaft system hangs the motor above the bench and leaves a light handpiece in your hand and the speed under your foot, which is how most dril...

A complete flex shaft system for grinding, carving, drilling and polishing at the jeweler's bench, and a straightforward step up from a hobby rotar...

An accessory assortment for grinding, shaping, deburring, and polishing on a rotary handpiece. The Foredom AK21 is a comprehensive 88-piece accesso...

A Jacobs chuck handpiece grips whatever shank the job requires, which is why it is the one most benches reach for first. The H.30 Jacobs chuck hand...

An electric wax carver holds a set temperature at the tip so a model can be shaped, welded, and hollowed without a flame at the bench. The Foredom ...