Busch 4203S 2 Groove Carbide Twist Drills on 3/32" Shanks 0.7mm to 1.60mm

The Busch 4203S carbide twist drills feature a 2-groove design engineered for drilling hard metals including steel, platinum, titanium, and hard alloys of gold and silver. Mounted on 3/32" shanks and available in ten sizes from 0.70mm to 1.60mm, these drills deliver outstanding service life that surpasses high-speed steel and standard tungsten carbide bits. The twin-groove construction promotes efficient chip evacuation, reduces heat buildup, and minimizes breakage during demanding drilling operations. These drills can also be used on mild steel. Not for use with glass, ceramics, or gemstones. Sold by the piece.

Features

• 2-groove design expels chips more effectively for improved performance and longer tool life
• Carbide construction outlasts high-speed steel and standard tungsten carbide drills in hard jewelry metals
• Suitable for steel, platinum, titanium, and hard gold and silver alloys
• Compatible with mild steel
• Use of a coolant extends drill lifespan
• For freehand use: recommended speed 5,000–9,000 RPM; a starting guide hole is advised
• For drill press use: recommended speed 8,000–14,000 RPM
• Perform best in a drill press — excess leverage or canting can cause breakage
• Not for use with glass, ceramics, or gemstones
• Sold by the piece

Specifications

Available Options

Notes

• Breakage can occur with excess leverage or canting — a drill press is recommended for best results.
• Using a coolant will increase drill lifespan.
• When drilling freehand, use a starting guide hole to improve accuracy and reduce stress on the bit.
• These drills are not suitable for glass, ceramics, or gemstones.

California Prop 65 Warning:
Cancer and Reproductive Harm. www.P65warnings.ca.gov.