Ikohe Extra Small Magnetic Tumbler-80 mm-110V

The Ikohe Mini Magnetic Tumbler features an 80 mm diameter bowl and is designed for jewelers who work on one or two pieces at a time. With a capacity of approximately 2 ladies' rings and the ability to move up to 75 grams of stainless steel pins, this compact machine is ideal for hand-crafted, one-at-a-time jewelry production. If you require production-volume output, larger 150 mm or greater machines are recommended — but for the artisan jeweler finishing individual handmade pieces, this unit delivers professional results in a small footprint.

Built with many of the same heavy-duty features found in larger magnetic tumblers, this machine is designed to handle the rigors of daily use. It operates on 110V/60Hz power and ships complete with 100 grams of 0.5 mm × 5.0 mm stainless steel magnetic pins and a small sample of Otto MF 610 magnetic tumbler solution.

About Magnetic Tumbling

Magnetic tumbling has revolutionized jewelry polishing by cutting hours of expensive hand labor from the finishing process. The tumbler can polish hard-to-reach areas — including undersides of rings, undercuts, channels, and fine filigree — to a bright finish in as little as 30 minutes for gold and 45 minutes for platinum.

Thousands of smooth, tiny stainless steel pins act like miniature burnishers, hammering the surface of your jewelry to create a bright, shiny, work-hardened finish. Because the process is non-abrasive, there is no metal loss. The pins reach into the smallest crevices and channels far more quickly than conventional rotary or vibratory tumblers. Broad, smooth surfaces may then receive a final quick polish by hand or in polishing media.

Features

• 80 mm diameter bowl — compact footprint suitable for bench use
• Capacity of approximately 2 ladies' rings per run
• Moves up to 75 grams of stainless steel pins (100 grams included; 75 grams recommended per use)
• Heavy-duty construction shared with larger Ikohe magnetic tumbler models
• Non-abrasive burnishing process — no metal loss
• Polishes hard-to-reach areas: channels, filigree, undercuts, and ring undersides
• Work-hardens jewelry surface during the polishing process
• Included pins: 0.5 mm × 5.0 mm stainless steel magnetic pins
• Includes a small sample of Otto MF 610 magnetic tumbler solution

Magnetic Tumbling — Pros & Cons

• Fast: Shines hard-to-reach places in minutes, saving significant hand-finishing time
• Burnishes & Shines: Hammering action work-hardens and brightens the entire piece
• No Metal Loss: Does not remove metal from your piece
• Not a Final Polish: May leave an orange-peel effect on smooth, broad surfaces
• Does Not Remove Scratches: Since no metal is abraded, pre-existing scratches and surface imperfections remain

Specifications

What's Included

• Ikohe Extra Small Magnetic Tumbler (80 mm, 110V)
• 100 grams of 0.5 mm × 5.0 mm stainless steel magnetic pins
• Small sample of Otto MF 610 magnetic tumbler solution

Notes

For best tumbling results, use 75 grams of pins at a time even though 100 grams are included. This unit is intended for low-volume, artisan jewelry work. For production-level output, consider the 150 mm or larger magnetic tumbler models. California Prop 65 Warning: This product contains Chromium-Nickel.

California Prop 65 Warning:
Cancer and Reproductive Harm. www.P65warnings.ca.gov.