Paragon J14 Express Large Burnout Kiln With Programmer-120V or 220V

Run larger burnout loads on a repeatable program instead of watching a dial. The Paragon J14 Xpress Large Programmable Kiln is built for shops that need a bigger burnout chamber with reliable control: a one-piece ceramic fiber chamber measuring 13" W × 13" D × 9" H, and a built-in Sentry Xpress 3-key controller that stores up to four programs of as many as eight segments each, so you can set it, run it, and get consistent results every time. It is offered in 120V and 220V / 240V versions and ships by truck freight in a 44" × 28" × 34" crate, weighing approximately 90 lb.

Features

• One-piece ceramic fiber chamber with embedded elements
• Door opens 180° for easy loading and unloading
• Tight-sealing door with heavy spring latch
• Vent hole with steel cover in the top and in the door
• On/off safety switch
• Built-in Sentry Xpress 3-key multi-stage programmer
• Maximum temperature 1700°F (926°C)
• Stores up to 4 programs of as many as 8 segments each in Ramp-Hold mode
• Single-Speed mode for straightforward firings
• Skip a segment, change target temperature, or add hold time during an active firing
• Controls both heating and cooling in Ramp-Hold mode
• Program Review, temperature alarm, and °F/°C display
• Thermocouple offset and start delay functions
• Error messages for sensor and relay issues; 12 month warranty on the controller

Available Options

Notes

• The 120V version draws approximately 20 A and requires a NEMA 5-20R receptacle; it is supplied with a NEMA 5-20P cordset.
• This kiln is not UL Std 499 compliant and is not CE compliant. It is TUV tested.
• Ships by truck freight only.

Drop Shipping: This product is drop shipped directly from the manufacturer. Please allow 2 to 4 weeks for delivery.