The Silver Economy 76mm (3") Flat Rolling Mill with Reduction Gear is Otto Frei's best-selling economy mill for studio and classroom use. Designed for light-duty work on soft, non-ferrous metals, it features a protected 4:1 reduction gear train, high-carbon steel flat rolls, and simple T-bar adjustment — no flywheel required. Whether you're thinning sheet metal or texturing stock, this mill delivers dependable performance at an accessible price point.
Features
-
Roll Size: 76 mm (3") wide x 43 mm diameter high-carbon steel flat rolls
-
Gear Reduction: 4:1 ratio — four handle turns rotate the rolls once for easier cranking
-
Adjustment: T-bar roller adjustment for quick, straightforward gap setting
-
Protected Gears: Covered reduction and side gears guard against contamination and wear
-
Max Sheet Thickness: 2.0 mm — anneal often and take small passes for best results
-
Non-Ferrous Use: Optimized for silver, gold, copper, and brass
-
Warranty: 12-month warranty (non-motorized use only)
Specifications
| Part No. |
128.199 |
| Roller Size |
76 mm (3") wide x 43 mm diameter |
| Roll Material |
High-carbon steel |
| Gear Ratio |
4:1 |
| Max Sheet Thickness |
2.0 mm |
| Mill Dimensions |
8-1/2" W x 8-1/2" D x 12" H (without handle) |
| Shipping Size / Weight |
12" x 12" x 16"; dimensional weight 52 lb |
| Origin |
Made in India |
| Warranty |
12 months (non-motorized use) |
What's Included
- Rolling mill main assembly with two flat rolls installed
- Large handle with small handgrip
- T-top roller adjuster and mill wheel
- Printed owner's manual
Notes
-
Non-ferrous metals only. Do not roll steel or other ferrous metals.
- Do not motorize or modify the unit — modifications void the warranty.
- Before first use, wipe protective grease from the rolls and frame; do not remove grease from internal gears.
- Before each session, wipe rolls clean. After each session, coat rolls with light oil or grease to prevent rust.
- Periodically grease the side gears and reduction gear. Check all hardware for tightness before and after use.
- Make many small reductions and anneal frequently for best results and to protect the mill.
- Ships well-packed. Minimal setup: wipe rolls, bolt on handle, install T-top adjuster, and align top gears. Detailed instructions are included in the manual.
California Prop 65 Warning:
This product can expose you to lead and nickel, which are known to cause cancer, birth defects or other reproductive harm.
www.P65warnings.ca.gov.