Zu Inhalt springen
von Foredom

Foredom SR 230V biegsame Welle mit C.SCH-2-Gusseisen-Fußschalter und Handstück nach Wahl

Part # M.SR-2-C.SCH-2-134.228 In Stock Weight <0.1 lb / <5 g
Limited time deal -15%
Current price $556.37
List Price: $654.57
Handstück auswählen: H.18

Description

220V / 240V supply only. This unit requires higher-voltage supply (220V / 240V). Plugging it into a standard North American 110V / 120V outlet will prevent it from running properly. Confirm your outlet voltage before powering on. Learn more
Not sure this is the right kit? Compare every Foredom motor, speed control and handpiece we stock, 357 combinations priced as you pick. Build your kit

Dies ist die 230-V-Konfiguration des klassischen Foredom-SR-Hängemotorsets mit dem schweren gusseisernen Fußschalter: ein umkehrbarer 1/6-PS-Motor M.SR-2, der Metallfußschalter C.SCH-2 und Ihr Wunsch-Handstück. Das gusseiserne Pedal bleibt sicher auf dem Boden stehen und ermöglicht eine präzise, stufenlose Geschwindigkeitsregelung vom Kriechtempo bis zur Höchstgeschwindigkeit, sodass beide Hände am Werkstück bleiben. Juweliere, Metallhandwerker und Reparaturwerkstätten profitieren vom gesamten Drehmomentbereich des SR-Motors zum Schneiden, Schleifen und Polieren.

Stromversorgung und Stecker: Adapter erforderlich

Nur 230 V. Ein Stecker im NEMA-5-15-Stil plus ein landesspezifischer 230-V-Steckeradapter ergibt den passenden Anschluss an Ihre 230-V-Steckdose. Nicht an 110/120-V-Steckdosen anschließen.Dieses Set ist ausschließlich für 230 V ausgelegt. Das Kabel des Bedienelements C.SCH-2 endet in einem Stecker im NEMA-5-15-Stil, der in Nordamerika üblichen Form. Für den Anschluss benötigen Sie daher einen auf Ihre Steckdose abgestimmten Steckeradapter: einen NEMA-Adapter für 230-V-Steckdosen an nordamerikanischen 230-V-Stromkreisen oder andernorts den für die Steckdosen Ihres Landes passenden Adapter. Schließen Sie dieses Set niemals an eine Standardsteckdose mit 110/120 V an. Der Stecker passt zwar, aber die Spannung ist für Motor und Bedienelement falsch.

Merkmale

  • Foredom-Motor M.SR-2: 1/6 PS, bis zu 18.000 U/min, umkehrbar, 230 V
  • Gusseiserner Fußschalter C.SCH-2 (230 V): robustes Metallgehäuse, das an seinem Platz bleibt, mit gleichmäßiger Geschwindigkeitsregelung über den gesamten Bereich
  • Ihre Wahl aus zehn Handstücken, von Schnellwechsel- bis Hochleistungsmodellen, oder eine Option nur mit Motor und Bedienelement, falls Sie bereits ein Handstück besitzen
  • Der Motor der SR-Serie umfasst eine standardmäßige 39-Zoll-Flexwelle mit Schlüsselspitze und Hülle für Schnellwechsel-Handstücke von Foredom und anderen Herstellern
  • Die kugelgelagerte Motorkonstruktion liefert bei normaler Belastung gleichmäßige Leistung ohne Abwürgen
  • Die umkehrbare Drehrichtung eignet sich für Linkshänder, verlängert die Lebensdauer von Schleifmitteln, erleichtert symmetrisches Schleifen, beschleunigt das Polieren und hilft beim Herausdrehen festsitzender Bohrer
  • Ausschließlich 230 V; der Stecker im NEMA-5-15-Stil erfordert einen landesspezifischen 230-V-Steckeradapter (nicht im Lieferumfang enthalten)
  • Zweijährige Garantie auf jeden Foredom-Motor

Verfügbare Optionen

Teilenummer Handstückmodell Beschreibung
M.SR-2-C.SCH-2-134.228 H.18 Schnellwechsel-Handstück
M.SR-2-C.SCH-2-134.233 H.8 Schlankes Handstück
M.SR-2-C.SCH-2-134.236 H.30 Handstück mit verstellbarem Jacobs-Bohrfutter
M.SR-2-C.SCH-2-134.237 Faro Quick Change (H.10) Schnellwechsel-Handstück (ohne Duplex-Feder)
M.SR-2-C.SCH-2-134.244 H.44T Handstück mit konischem Kopf
M.SR-2-C.SCH-2-134.258 H.43T Handstück mit kurzem konischem Kopf
M.SR-2-C.SCH-2-134.259 H.28 Slimline-Spannzangen-Handstück
M.SR-2-C.SCH-2-134.260 H.25 Hochleistungs-Handstück
M.SR-2-C.SCH-2-134.670 H.20 Schnellwechsel-Handstück
M.SR-2-C.SCH-2-134.700 Technique Swiss In der Schweiz gefertigtes Schnellwechsel-Handstück
M.SR-SCH-2 Kein Handstück Nur Motor und Fußschalter

Hinweise

  • Achtung: Bei der Verwendung von Dornen mit Schraubverschluss und unmontierten Polierscheiben kann die Rücklauffunktion den Dorn lösen. Verwenden Sie beim Betrieb mit Rücklauf ausschließlich vormontierte Polierscheiben.
  • Der gleiche Motor M.SR-2 ist auch mit dem Kunststoff-Fußschalter C.FCH-2 in den Steckerversionen für Nordamerika, Europa (CE) und Australien sowie mit den Drehreglern C.EMH-2 und C.EMHF-2 erhältlich.

Specifications

Brand
Foredom
Part #
M.SR-2-C.SCH-2-134.228
Type
Rotationswerkzeuge
Voltage
220V / 240V
Motor Series
M.SR-2 hang-up flex shaft motor
Motor Power
1/6 HP
Maximum Speed
Up to 18,000 RPM (foot control)
Rotation
Forward and reverse
Bearing Type
Ball bearing motor
Voltage
230 V
Plug Style
NEMA 5-15 style; country-appropriate 230 V plug adapter required (not included)
Speed Control
C.SCH-2 cast iron foot control, 230 V
Flexible Shaft
Standard 39 inch key-tip shaft and sheath

What's Included

What's Included

Everything in the box.

Component Description
Motor Foredom M.SR-2 motor, 1/6 HP, reversible, up to 18,000 RPM (230V), with standard 39 inch key-tip flexible shaft and sheath
Speed Control Foredom C.SCH-2 cast iron foot control (230V), NEMA 5-15 style plug; a country-appropriate 230 V plug adapter is required and not included
Handpiece Your choice of handpiece from ten options, or motor and control only with the No Handpiece option
California Prop 65 Warning California Prop 65 Warning:
This product can expose you to beryllium, nickel, and lead, which are known to cause cancer and reproductive harm. www.P65warnings.ca.gov.

Reviews · 3

This product has 3 reviews.

Read & write reviews ↓
  • 5 stars: 3 (100%)
  • 4 stars: 0 (0%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
This product has no reviews of its own. The merchant grouped it with related products, so the reviews shown are from across that group.
A
Anonymous
H.20
Smooth running motor

Smooth running motor and the foredom quick change hand piece slides on easily. My over 20 year old foredom has a problem with the on/off toggle and I needed a flex shaft rapidly. So pleased to find Foredoms with discounted price at Otto Frei.

T
Tara Wandel
H.44T
I like the quality and the comfort of the

I like the quality of the machine and and the comfort of the hand piece. Happy with my decision.

T
Tara

Super excited to receive and am learning how different it is from my dremel. So glad i caught the sale!