Badeco 8LC100-9LC100 Micro Polishing-Micro Filing Handpiece- No Duplex

The Badeco 8LC100-9LC100 is a reciprocating micro-polishing and micro-filing handpiece engineered to reach corners, recesses, and tight areas that conventional polishing tools cannot access. Otto Frei purchases the Badeco 8LC100 and converts it to the 9LC100 for USA key tip compatibility, making it a drop-in addition to standard flex shaft setups. This listing is for the version without a duplex spring (part number 134.748ND). The version with a duplex spring is available separately under part number 134.748.

The handpiece operates on a true reciprocating stroke of 1.0 mm, controllable from 500 to 7,000 strokes per minute — fine enough for delicate finishing work yet capable of sustained professional use. Weighing just 55 grams and measuring 106 mm (4-1/4") in length, it produces virtually no vibration and operates at an exceptionally low 30 decibels. No oiling is ever required; the 8LC100-9LC100 is designed for continuous trouble-free use up to 8 hours a day, 7 days a week.

Tools are secured in the included Universal Tool Holder via a set screw, accepting ceramic files, Glardon-Vallorbe miniature files, or custom-adapted files and felt points. Additional Universal Tool Holders (part number 134.743-UTH) and a special 3.2 mm tool holder that uses two set screws (part number 134.743-320) are available as separate accessories.

Features

• Reciprocating action with a 1.0 mm stroke length for precision micro-polishing and micro-filing
• Speed range of 500–7,000 RPM for fine control over finishing work
• Converted by Otto Frei from Badeco 8LC100 to 9LC100 for USA key tip flex shaft compatibility
• Lightweight at 55 grams — reduces hand fatigue during extended use
• Virtually vibration-free operation at approximately 30 decibels
• No oiling required — maintenance-free design built for daily professional use
• One Universal Tool Holder included; accepts ceramic files, miniature files, and custom tools via set screw
• Compatible with optional 3.2 mm tool holder accessory (sold separately, part number 134.743-320)
• Also available for use with the Badeco M4-ASF Micromotor system — see the Badeco 4LC100
• 6-month factory warranty against defects in parts and manufacturing

Specifications

What's Included

• One Badeco 8LC100-9LC100 reciprocating handpiece (without duplex spring)
• One Universal Tool Holder

Notes

• The version with a duplex spring is sold separately under part number 134.748.
• Additional Universal Tool Holders are available separately (part number 134.743-UTH).
• The optional 3.2 mm tool holder, which uses two set screws, is available separately (part number 134.743-320).
• For use with a Badeco Micromotor system, see the Badeco 4LC100 handpiece.