220V / 240V supply only. This unit requires higher-voltage supply (220V / 240V). Plugging it into a standard North American 110V / 120V outlet will prevent it from running properly. Confirm your outlet voltage before powering on.
Learn more
230V export flex shaft kit for 220–240 V regions, configured for stone setting, low-RPM drilling, and precision rotary work with a chuck-style handpiece and matching foot control. The motor delivers steady power while the handpiece feels solid and controllable in your grip. Sold with a North American 3-prong plug; use a suitable plug adapter and do not connect to 100–127 V circuits.
Features
High-torque, low-speed flex shaft motor optimized for stone setting and low-RPM drilling applications
Reversible motor helps with clearing chips, backing out stuck drill bits, and refining symmetrical cuts
Designed to work especially well with hammer handpieces and drill press attachments that require low speeds
H.30 handpiece with adjustable chuck accommodates a wide range of small rotary tools and burs
Electronic C.TXR foot control provides smooth, precise speed adjustment through the full low-speed range
Standard shaft and sheath connect to quick disconnect handpieces for flexible setup at the bench
Kit layout lets you go from layout and drilling to setting and finishing with one coordinated system
Specifications
Property
Value
Motor Series
LX Series high-torque, low-speed flex shaft motor
Motor Model
M.LX export version
Motor Power
1/10 HP
Maximum Speed
5,000 RPM
Motor Type
Permanent magnet, ball bearing construction
Torque Profile
High torque at low speed for stone setting and controlled drilling
Rotation Direction
Reversible (forward and reverse)
Voltage
230 V AC export version for regions with 220–240 V mains supply
Speed Control
C.TXR electronic foot-operated speed control (required for M.LX motors)
Handpiece
H.30 chuck-style handpiece with adjustable Jacobs chuck
Included Drive
Standard flexible shaft and sheath for quick disconnect handpieces
Recommended Uses
Stone setting, low-speed drilling, and use with hammer handpieces
Brand
Foredom
What's Included
Item
Description
M.LX 230V motor assembly
High-torque, low-speed permanent magnet motor with flexible shaft and sheath
C.TXR-2 230V foot control
Special electronic foot-operated speed control matched to M.LX motors
H.30 handpiece
Adjustable Jacobs chuck handpiece for a range of small rotary tools
Compatibility
M.LX motor is intended for use with its dedicated 230V controls only
Use with Foredom C.TXR 230V (plastic housing) or C.SXR 230V (metal housing) foot controls
For bench-mounted control, use Foredom EMX 230V table top dial control
Suitable for use with compatible hammer handpieces and drill press attachments designed for low speeds
Notes
M.LX 230V Export Version – rated for 230 V AC mains in regions with 220–240 V supply. Sold with a North American 3-prong plug; use a plug adapter that matches your local outlet. Do not use on 100–127 V circuits.
Do not plug the motor directly into a wall outlet—always operate it through the specified Foredom control unit.
Hammer handpieces should be run at low speeds, typically under 3,000 RPM; the LX motor’s torque curve is designed for this range.
Using controls other than the recommended Foredom C.TXR, C.SXR, or EMX units may damage the motor.
California Prop 65 Warning:
This product can expose you to beryllium, nickel, and lead, which are known to cause cancer and reproductive harm.
www.P65warnings.ca.gov.
Reviews
∧
No reviews yet. Be the first to share your experience with this product.
California Prop 65 Warning: