AGILO 5131.XF CABSHINE-XF Square Edge Diamond Polishing Wheel

The AGILO CABSHINE-XF (5131.XF) is an extra-fine grit square-edge diamond polishing wheel designed to give cabochons and fine gemstones a final shine—especially on flat facets and edges where a sharp profile is preferred. Developed in Switzerland for AGILO and approved by Swiss lapidary artists and fine jewelers, it lets bench jewelers perform in-house touch-ups on many stones up to ~9 Mohs.

Key Features

• Extra-fine diamond abrasive for final shine and touch-ups
• Square-edge profile supports flats and crisp transitions
• Use with light, crosswise strokes (work with the side of the wheel)
• Recommended speed range: 3,000–7,000 RPM
• Mounted on a 3/32" (2.35 mm) shank

Specifications

How to Use

• Work crosswise: polish with the side of the wheel left-to-right, then top-to-bottom.
• Use light pressure; let the diamond do the work.
• Practice on inexpensive stones to learn the limits before working on valuable pieces.

Safety

• Always wear eye protection and a dust mask when grinding/polishing stones or metal.

3-Step Polishing Sequence (Square-Edge)

• Step 1 — CABSHINE-M (Medium) Square Edge — Part # 110.111M
• Step 2 — CABSHINE-F (Fine) Square Edge — Part # 110.121F
• Step 3 — CABSHINE-XF (Extra-Fine) Square Edge — Part # 110.104 (this item)

Notes

• Effective on many stones up to ~9 Mohs hardness; always test first.
• Not for removing deep scratches—use Medium (then Fine) before this Extra-Fine step.

California Prop 65 Warning:
Cancer and Reproductive Harm. www.P65warnings.ca.gov.