Skip to content
Black Friday: 10% off Durston and Fretz through December 2
10% off Durston and Fretz through Dec 2

Badeco MX-4 Touch Evolution LCD Micromotor with 465 Handpiece

Part # 134.746-465 Only 2 left Weight <0.1 lb / <5 g
Current price $2,895.00
Select Handpiece: Quickchange 465HP

Availability Sold out

Restock alerts are coming soon. For now, check back or ask us at [email protected]. We'll email you when it's back in stock. We'll email and text you when it's back in stock. Restock alerts are off for this item. It stays on My List. That didn't save. Try again. That didn't go through. Try again. Check the mobile number and try again. Tick the box to get texts. Save it to a list first. Good news: it's in stock now. Turn off an alert you no longer need, then try again. Couldn't save in this browser. Ask us when it's due back: [email protected]

Description

Running several handpieces at one bench station, and switching between them without stopping to flip a switch, is the job this control system does. The Badeco MX-4 Touch Evolution LCD is a professional bench micromotor control system that powers up to four handpieces and four micromotors from a single unit. Updated in Fall 2024 with an LCD display, it uses built-in light sensors to detect which handpiece has been lifted from its holder and directs power to that tool automatically. This kit pairs the control box with the New Carbon 465 quick-change handpiece, an RS2000 micromotor and a PC800 variable-speed foot control.

The RS2000 micromotor runs 2,000–20,000 RPM with high torque across the full range, and the 465 handpiece takes 3/32" (2.35mm) shank tools in a quarter-turn collet. The control box is dual voltage, running on 115V or 220V / 240V.

Features

  • Auto-select power: built-in light sensors activate the handpiece removed from its holder; cover unused holders with tape to keep them inactive.
  • LCD interface (2024 update): clear readout of settings and operating status.
  • Dual voltage: 115V or 220V / 240V operation for worldwide use.
  • RS2000 performance: high torque across the full 2,000–20,000 RPM range, suited to drilling and stone-setting work.
  • Rapid bur changes: the 465 handpiece uses a quarter-turn collet for tool changes without stopping the motor.
  • Version 2 control box: updated 6-prong connector compatible with PC200 and PC800 foot controls.
  • Three operating toggles: Hand/Foot mode, Forward/Reverse direction, and set-speed or variable-speed foot behavior.
  • Expandable system: add handpieces and RS2000 micromotors to build a full four-station setup.

Compatibility

  • PC200 and PC800 foot controls through the 6-prong connector on the V2 control box
  • Additional Badeco handpieces and RS2000 micromotors, up to four of each on one control box
  • Rotary tools with a 3/32" (2.35mm) shank in the 465 handpiece collet

Notes

Collet precision: the 465 collet is manufactured to tight tolerances for true 3/32" shanks. For best results, use precision burs from makers such as Busch, Brasseler/Germany (Fox, Panther, Komet) and Dentsply Maillefer.

Activation: MX-4 Touch Evolution units ship with the holder light sensors covered. Remove the tape to activate a holder and leave tape on unused holders to keep them inactive.

Expandability: start with this single-handpiece kit and add handpieces and RS2000 micromotors to build a custom four-station configuration.

Service: factory service and repairs are handled by the manufacturer at 8 rue de la Coulouvrenière, CH-1204 Genève, Switzerland. Refer to the warranty card included with your unit for instructions.

Specifications

Brand
Badeco
Part #
134.746-465
Type
Handpieces
Country of Origin
Switzerland
Dimensions
12 in x 8.5 in x 7 in
Voltage
Dual voltage, 115V or 220V / 240V
Micromotor Speed Range
2,000–20,000 RPM (RS2000)
Collet Size (465 HP)
3/32" (2.35mm)
Collet Action
Quarter-turn open and close, tool changes without stopping the motor
System Capacity
Up to 4 handpieces and 4 micromotors
Control Box Version
V2 with LCD and 6-prong foot-control connector
Foot Control
PC800 variable speed, also supports set-speed mode from the control box
Operating Toggles
Hand/Foot mode, Forward/Reverse direction, set-speed or variable-speed foot behavior
Warranty
2-year factory warranty (parts and labor)
Total Pieces
4

What's Included

What's Included

Everything in the box.

Component Description
Control Box Badeco MX-4 Touch Evolution LCD control box with auto-sensing handpiece holders
Handpiece Quickchange 465HP handpiece
Micromotor Badeco RS2000 micromotor
Foot Control Badeco PC800 Combi micromotor foot control
California Prop 65 Warning California Prop 65 Warning:
Cancer and Reproductive Harm. www.P65warnings.ca.gov.

Reviews

No reviews yet. Be the first to share your experience with this product.

Write a review ↓