The Badeco MX-4 Touch Evolution LCD is a professional bench micromotor control system designed to power up to four handpieces and four micromotors from a single unit. Updated in Fall 2024 with an LCD display, the system uses built-in light sensors to automatically detect which handpiece has been lifted from its holder and directs power to that tool — no manual switching required. This kit includes the New Carbon 465 quick-change handpiece, an RS2000 micromotor, a PC800 variable-speed foot control, and bench mounting hardware.
Features
-
Auto-select power: Built-in light sensors activate the handpiece removed from its holder; cover unused holders with tape to keep them inactive.
-
LCD interface (2024 update): Clear readout of settings and operating status.
-
Dual voltage: 115/230 V operation for studio or international use.
-
RS2000 performance: High torque across the full speed range, suited to drilling and stone-setting work.
-
Rapid bur changes: 465 handpiece uses a quarter-turn collet for tool changes without stopping the motor.
-
Version 2 control box: Updated 6-prong connector compatible with PC200 and PC800 foot controls.
-
Three operating toggles: Hand/Foot mode, Forward/Reverse direction, and Set-speed or variable-speed foot behavior.
-
Expandable system: Add additional handpieces and RS2000 micromotors to build a full four-station setup.
Specifications
| Voltage |
115/230 V (dual) |
| Micromotor Speed Range |
2,000–20,000 rpm (RS2000) |
| Collet Size (465 HP) |
3/32" (2.35 mm) |
| System Capacity |
Up to 4 handpieces and 4 micromotors |
| Control Box Version |
V2 with LCD and 6-prong foot-control connector |
| Warranty |
2-year factory warranty (parts & labor) |
Available Options
| Part # |
Handpiece Included |
| 134.746-465 |
Quickchange 465HP |
What's Included
| Component |
Model |
Notes |
| Control Unit |
MX-4 Touch Evolution LCD (V2) |
Dual voltage 115/230 V; auto-sensing holders; LCD display; 6-prong foot-control connector |
| Quick-Change Handpiece |
New Carbon 465 HP |
3/32" (2.35 mm) collet; 1/4-turn open/close; tool change without stopping the motor |
| Micromotor |
RS2000 |
2,000–20,000 rpm; high torque across the range |
| Foot Control |
PC800 |
Variable speed; also supports set-speed mode via control box |
| Mounting Hardware |
— |
For installing the control box at the bench |
Notes
Collet precision: The 465 collet is manufactured to tight tolerances for true 3/32" shanks. For best results, use precision burs from makers such as Busch, Brasseler/Germany (Fox, Panther, Komet), and Dentsply Maillefer.
Activation: MX-4 Touch Evolution units ship with holder light sensors covered. Remove the tape to activate a holder; leave tape on unused holders to keep them inactive.
Expandability: Start with this single-handpiece kit and add additional handpieces and RS2000 micromotors to build a custom four-station configuration.
Service: Factory service and repairs are handled by the manufacturer at 8 rue de la Coulouvrenière, CH-1204 Genève, Switzerland. Refer to the warranty card included with your unit for instructions.
