Castaldo LiquaFast ICE Transparent No Shrink Liquid Mold Rubber-4 Kilo Kit

LiquaFast® ICE is Castaldo’s ultra-fast-curing, transparent 0% shrinkage RTV silicone mold rubber, developed for rapid production of CAD-CAM, RP, and SLA models. This two-part system forms tough, long-lasting molds ready in as little as 30 minutes — perfect for same-day casting workflows. Its clarity allows visual inspection of models during pouring and curing, while low viscosity ensures bubble-free detail replication.

Note: Hazardous material — ground shipping only. Not eligible for air or international shipment.

Key Features

• Super-fast cure — ready-to-use molds in as little as 30 minutes.
• 0% shrinkage for precision-fit wax patterns and accurate castings.
• Transparent silicone formula allows direct visual inspection while curing.
• Extremely tough and tear-resistant — molds resist softening over time.
• Low viscosity simplifies measuring, mixing, and pouring with fewer bubbles.
• Recommended vacuum degassing for optimal clarity and mold strength.
• Economical alternative to traditional silicone RTVs — lower cost per mold cycle.

Specifications

What’s Included

• LiquaFast® ICE Part A (clear base)
• LiquaFast® ICE Part B (clear catalyst)
• Total net contents: 4 kilograms (8.8 lb); mix 1:1

Compatibility & Applications

• Optimized for CAD-CAM, RP, and SLA resin models, including Solidscape® and similar materials.
• Ideal for jewelers and model makers requiring fast turnaround and high detail fidelity.
• Compatible with most casting waxes and resins. Use a barrier coat for sensitive materials if required.
• Recommended for professional jewelry mold making, prototyping, and small-scale production.

Usage Notes

• For best results, vacuum-degass after mixing and again after pouring to remove air bubbles.
• To accelerate curing, warm molds gently to 120°F (50°C). Avoid overheating above 150°F (65°C).
• If no vacuum pump is available, brush or dip the model before pouring the full mold to minimize air entrapment.
• Maintain even room temperature (above 65°F / 18°C) during curing. Avoid temperature swings.
• Store unopened containers in a cool, dry place away from sunlight. Shelf life: approximately 6 months.
• Professional use only — designed for experienced casters and mold makers.

Safety & Shipping

• Classified ORM-D: ground shipping only; not for air or international transport.
• Use gloves and eye protection. Work in a well-ventilated area.
• Read and follow all Castaldo SDS and label precautions before use.

California Prop 65 Warning:
Cancer and Reproductive Harm. www.P65warnings.ca.gov.