Ceramit-Opaque Red 2 oz

Ceramit Opaque Red (Part A) is a remarkably versatile decorative enamel that delivers a finish equivalent to hard-fired enamel — without a kiln. As a two-part epoxy-like system, Ceramit Part A (color) must be mixed with Ceramit Catalyst (Part B, sold separately) before application. The result is a durable, professional-grade surface treatment used by jewelers and metalsmiths on a wide range of substrates.

Cured Ceramit achieves a hardness of 60–75 on the Sward scale, comparable to kiln-fired enamel at 65–80. Colors can be intermixed to create custom shades, and the material performs as an excellent spraying medium when used with Ceramit Thinner.

Features

• Two-part epoxy-like enamel system — Part A (color) requires mixing with Ceramit Catalyst (Part B)
• Finish equivalent to hard-fired enamel; Sward hardness of 60–75 when cured
• Colors can be mixed to create unique custom shades
• Applicable to vertical, horizontal, curved, and round surfaces
• Curable at room temperature or accelerated with heat
• Requires only 30–45 minutes at a maximum curing temperature of 250°F (120°C)
• Compatible with temperature-controlled ovens, infrared lamps, or portable heaters
• Excellent spraying medium when used with Ceramit Thinner
• Non-conductive — adjacent exposed metal surfaces may be electroplated without affecting color or finish
• Can be applied to metal, ceramic, porcelain, glass, rock, and certain plastics

Specifications

Notes

• Shipping Restrictions: This item ships via UPS Ground Only within the USA only. No air service (UPS Next Day, 2nd Day, or 3-Day), no USPS/mail service. Cannot be shipped outside the United States.
• This product is Part A (color) only. Ceramit Catalyst (Part B) is required and sold separately.
• Apply only to porous surfaces not affected by the heat of the curing cycle.
• California Proposition 65 warning applies — Modified Epoxy Resin.