Single unit weight: -- lbs / -- kg
This small oval disc cutter set provides eight precisely sized oval punches for charms, pendants, and accent components, with shear-style cutting edges that help each blow translate into a clean, confident cut.
| Detail | Value |
|---|---|
| Punch Count | 8 oval punches |
| Punch Size Range | 8 × 6 mm to 18 × 16 mm |
| Individual Punch Sizes | 8 × 6 mm, 10 × 8 mm, 12 × 10 mm, 14 × 10 mm, 16 × 12 mm, 16 × 14 mm, 18 × 13 mm, 18 × 16 mm |
| Approx. Inch Equivalents* | 5/16" × 1/4" to 3/4" × 5/8" |
| Recommended Max Thickness (hammer use) | Up to 18 gauge non-ferrous metals |
| Recommended Max Thickness (hydraulic press) | Up to 8 gauge non-ferrous metals |
| Recommended Metals | Copper, silver, gold, brass, nickel silver (non-ferrous) |
| Cutting Edge Style | Angled shear-style cutting edges |
| Brand | Durston |
*Inch sizes are approximate equivalents; metric sizes are exact.
| Item | Description | Qty |
|---|---|---|
| Oval disc cutter body | Disc cutter block for small oval punches | 1 |
| Oval punches | Metric-calibrated oval punches (set of 8) | 8 |
| Stamping pad | Support pad for use under the cutter | 1 |
| Shims | Shims for supporting material and maintaining alignment | Set |
| Cutting lubricant | Lubricant for punch cutting edges | 1 |
| Hex key | For adjustments and maintenance of the cutter | 1 |
For best performance, place the disc cutter on a rubber or high-durometer urethane pad, lightly lubricate the punch edges, and strike with a suitable brass or rawhide mallet—never a nail-driving hammer. Support the opposite side of the cutter with a similar sheet of metal to help keep the plates aligned and reduce sticking. Do not exceed the recommended metal thickness, and store the cutter lightly lubricated in a dry location to help prevent rust and extend tool life.
California Prop 65 Warning: