Foredom H.MH-120 Adjustable Jacobs Chuck Microgrinder Handpiece

Adjusts From 0 to 4.0mm (5/32")

Foredom H.MH-120 adjustable chuck micro grinder handpiece plugs into the Foredom HP4-917 Control Box which is sold separately. This handpiece has an adjustable Jacobs chuck, similar to the one found on the popular Foredom #30 handpiece. This geared 3 jaw chuck will take a variety of bits, up to 4.0 mm (5/32”) in diameter, closing all the way down to zero. This new mirco grinder handpiece is controlled by the dial on the control box (or with the variable speed foot control-if you have one plugged into your Foredom Control Box) with speeds up to 20,000 rpm. The Foredom Micro Grinder handpiece has more torque than the standard micromotor handpiece but is geared for a lower maximum speed (20,000 max rpm for this microgrinder handpiece vs. 35,000 max rpm on the standard micromotor handpiece).

The handpiece length is 8-3/32" (206mm) and weighs 1-lb, 2-oz. (510 grams). The diameter of the handpiece is 1-3/8" (35mm) at cord end and 1-1/64" (26mm) at chuck end.

This is the microgrinder handpiece only-requires the Foredom Control box to operate.

California Prop 65 Warning:
This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, birth defects or other reproductive harm. www.P65warnings.ca.gov.