Foredom MADC20 Dust Collector 110V

The Foredom MADC20 is a compact, single-station dust collector designed for studios and labs that demand strong suction with minimal noise. Its two-stage system uses a cyclone pre-filter to capture approximately 99% of debris before it reaches the HEPA stage, preserving suction performance and extending filter life. The HEPA filtration is rated to MERV 16 and captures 99.8% of particles ≥ 0.3 micron. At just 52 dBA and 115 CFM, it is well suited for grinding, polishing, deburring, and sanding dry materials in professional jewelry and metalsmithing studios.

Features

• Quiet and powerful: 115 CFM airflow at approximately 52 dBA.
• Two-stage filtration: Cyclone pre-collection plus HEPA (MERV 16) for fine particulate control.
• Studio-friendly design: Caster-mounted with a compact footprint and remote on/off switch with 9' cable.
• Easy integration: Includes remote connector for the Foredom MALC15 Lighted Work Chamber.
• Low-maintenance: Clear polycarbonate collection chamber for visible debris monitoring and long-life filters.
• Dry use only: Suitable for wood, metal, die stone, plaster, and other dry dusts.

Specifications

What's Included

• MADC20 cyclone dust collector with clear polycarbonate collection chamber
• Two HEPA filters (MERV 16; 99.8% @ ≥ 0.3 µm)
• Remote on/off switch with 9' cable
• Remote connector for MALC15 Lighted Work Chamber
• 5' × 2-1/4" hose
• Power cord
• Free bonus filters (limited time): MADC205 Bag Filter and MADC208 Canister Filter

Notes

• Dry materials only. Do not use with liquids or wet processes.
• For best results, position the unit close to the work area and keep hoses as short and straight as possible.
• Pairs with the Foredom MALC15 Lighted Work Chamber (sold separately).
• This product is subject to California Proposition 65 warnings.