Jumbo Heart Shaped Set of 2 Disc Cutters in Wood Box

Cut precise jumbo heart shapes from soft non-ferrous sheet metal with this set of two hardened tool steel disc cutters. Presented in a fitted wood storage box, this set includes two sizes — 28mm × 36mm and 34mm × 43mm — making it ideal for jewelers and metalsmiths who need oversized heart blanks for pendants, charms, and decorative metalwork. Each punch is individually fitted to its matching hole with extremely close tolerances, ensuring clean, accurate cuts every time.

Suitable for soft precious and non-ferrous metals including gold, silver, copper, brass, and nickel silver up to 20 gauge thick. Use with a mallet or in a hydraulic press. The wood storage box features round holes sized to hold the heart-shaped cutters securely when not in use.

Features

• Set of 2 jumbo heart-shaped disc cutters: 28mm × 36mm and 34mm × 43mm
• Properly hardened tool steel construction with very sharp cutting edges
• Each cutter individually fitted to its matching hole with extremely close tolerances
• Compatible with mallet use or hydraulic press
• Presented in a fitted wood storage box
• For use on soft non-ferrous metals up to 20 gauge thick

Specifications

Notes

• Use the disc cutter on top of a rubber pad for support.
• Apply a cutting lubricant, such as Stay Sharp, to the cutting edges before use.
• Use a suitable mallet — never a nail-driving hammer. A brass mallet is recommended.
• Support the opposite side of the cutter with a sheet of the same diameter metal being cut to maintain alignment and reduce material sticking.
• Do not exceed the 20-gauge maximum thickness recommendation.
• Only cut soft non-ferrous metals. Never use on ferrous metals.
• Ensure cutting edges are facing down before striking.
• To prevent rust, lubricate cutting edges after use and store in a dry location.
• Use with a 95 durometer urethane pad to extend the life of the cutters.

California Prop 65 Warning:
Cancer and Reproductive Harm. www.P65warnings.ca.gov.