Wolf Sand Blaster A-WTSB-P06 Canister Filter

Keep your Wolf Sand Blaster cabinet clear, quiet, and working well with the A-WTSB-P06 filter. This reusable pleated cartridge is rated MERV 15. It sits inside the blaster's exhaust path and catches the fine abrasive dust you make when you blast, matte, or prep metal surfaces, keeping dust out of your shop air and letting your media be recovered for reuse. When blasting, a cloud of fine particles builds up in the chamber, and a clogged or worn filter slows airflow – you'll see the glove deflate, the window cloud over, and media recovery drop off. A clean MERV 15 cartridge keeps air moving through the cabinet, so you can see your workpiece and each blast cycle stays steady.

Features

• MERV 15 rating: High-efficiency pleated media made to trap very fine abrasive dust, down to sub-micron sizes.
• Pleated design: More filter surface area means longer runs between cleanings.
• Works with the clean button: Cleans with the blaster's built-in shaker, so you don't have to take it apart for routine care.
• Cleanable and reusable: Made to be cleaned again and again, not thrown away.
• Helps you recover media: Keeps abrasive inside the system so less is wasted.

Notes

Clean the filter at least once a week, or sooner if airflow drops or the gloves start to deflate while you work. To clean, switch the blaster on and press the clean button several times to shake built-up dust off the pleats. If the cabinet still can't hold steady airflow after cleaning, it's time to replace the cartridge. This filter is a good fit for jewelers, watchmakers, and bench technicians who use a Wolf Sand Blaster for satin finishes, oxide removal, casting cleanup, and surface prep.