Rectangle Shaped Set of 4 Disc Cutters in Wood Box

Cut precise rectangle shapes from soft non-ferrous metals with this set of four rectangle disc cutters, stored in a fitted wood box. Designed for use with gold, silver, copper, brass, and nickel silver up to 20 gauge thick, these cutters are manufactured from properly hardened tool steel with very sharp cutting edges and extremely close tolerances between each punch and its matching hole. Compatible with a mallet or hydraulic press, this set is a reliable choice for jewelers and metalsmiths who need consistent, clean rectangular blanks.

Features

• Set of four rectangle-shaped disc cutters in graduated sizes
• Manufactured from properly hardened tool steel for long-lasting performance
• Individually fitted punches matched to corresponding holes with extremely close tolerances
• Very sharp cutting edges for clean, precise blanks
• Compatible with use by mallet or in a hydraulic press
• Suitable for gold, silver, copper, brass, and nickel silver up to 20 gauge thick
• Stored in a fitted wood box for organized storage and protection

Specifications

Notes

• Use on top of a rubber pad for support during cutting.
• Apply a cutting lubricant such as Stay Sharp to the cutting edges before use.
• Use a suitable mallet only—never a nail-driving hammer. A brass mallet is recommended.
• Support the opposite side of the cutter with a sheet of the same diameter metal being cut to maintain alignment and minimize material sticking.
• Do not exceed the 20 gauge maximum thickness recommendation.
• Only cut soft non-ferrous metals—do not use on ferrous metals.
• Ensure cutting edges are facing down before striking.
• To prevent rust, keep cutters lubricated between uses and store in a dry location.
• Use with a 95 durometer urethane pad to extend the life of the cutters.

California Prop 65 Warning:
Cancer and Reproductive Harm. www.P65warnings.ca.gov.